[1.]
Nobody cared about the millionth sata_nv interrupt
[2.]
Long after boot, I get "irq 209: nobody cared", and my hard drive
stops working (209 is libata for the hard drive). The third time this
happened, /proc/interrupts gave exactly 1000000 for the number of
interrupts; the second time it was also an even value in base 10 (but I
didn't remember what value) and I missed the first time it happened.
[3.]
libata, sata_nv, kernel
[4.]
Linux version 2.6.18-gentoo-r2 (root@livecd) (gcc version 4.1.1 (Gentoo
4.1.1)) #1 Mon Nov 20 19:16:59 EST 2006
(Based on 2.6.18.2)
None of the gentoo patches look at all related, and current -stable
doesn't look like it would fix anything related.
[5.]
2.6.17 either didn't have this issue or I didn't run it long enough. I'm
building it now to try more extensively.
[6.]
Call Trace:
[<ffffffff8020a9ce>] dump_stack+0x12/0x17
[<ffffffff80240078>] __report_bad_irq+0x30/0x7d
[<ffffffff8024028b>] note_interrupt+0x1c6/0x207
[<ffffffff8023f8e7>] __do_IRQ+0x91/0xc5
[<ffffffff8020bd87>] do_IRQ+0xe7/0xf5
[<ffffffff80209b31>] ret_from_intr+0x0/0xa
DWARF2 unwinder stuck at ret_from_intr+0x0/0xa
Leftover inexact backtrace:
<IRQ> [<ffffffff8805ee05>] :forcedeth:nv_nic_irq+0x5d/0x168
[<ffffffff8805ee23>] :forcedeth:nv_nic_irq+0x7b/0x168
[<ffffffff8023f827>] handle_IRQ_event+0x29/0x58
[<ffffffff8023f8ce>] __do_IRQ+0x78/0xc5
[<ffffffff8020bd87>] do_IRQ+0xe7/0xf5
[<ffffffff80208884>] default_idle+0x0/0x50
[<ffffffff80209b31>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff802088ad>] default_idle+0x29/0x50
[<ffffffff80208910>] cpu_idle+0x3c/0x5b
[<ffffffff8058f756>] start_kernel+0x1bd/0x1c2
[<ffffffff8058f24b>] _sinittext+0x24b/0x24f
handlers:
[<ffffffff803480f1>] (nv_generic_interrupt+0x0/0x97)
Disabling IRQ #209
[7.]
It's crashed three times in a day; the third time I was intentionally
driving up the hard drive interrupt count, and it crashed before too long.
Takes too long to bisect too effectively, but I think it'll be
reproduceable.
[8.]
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
(prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device 8234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at e400 [size=8]
Region 1: I/O ports at e080 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d880 [size=16]
Region 5: Memory at dff7c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
-Daniel
*This .sig left intentionally blank*
Fixed this with the patch I sent a moment ago; ethernet card was sending
INTx interrupts while sending MSI interrupts.
-Daniel
*This .sig left intentionally blank*