Hi,
when trying to reproduce a bugreport in bugzilla, I am experiencing panics
upon boot. The .config which causes this is at [1]
I'd guess that it's some race - I have tried adding a few debug printk()s
into mm/slub.c for __kmalloc_track_caller() and slab_alloc(), and the
problem seems to have vanished after this.
The panic happens alternatively on the following two traces:
BUG: unable to handle kernel paging request at virtual address 75646f6d
printing eip:
c0264b45
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in:
CPU: 0
EIP: 0060:[<c0264b45>] Not tainted VLI
EFLAGS: 00010002 (2.6.22-rc2-mm1 #82)
EIP is at __kmalloc_track_caller+0x4f/0x60
eax: 00000000 ebx: 00000282 ecx: 75646f6d edx: c10705b0
esi: c05602c8 edi: 000000d0 ebp: c02a3cd1 esp: c21c5db8
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process modprobe (pid: 715, ti=c21c4000 task=c23d0af0 task.ti=c21c4000)
Stack: c0561500 c2b04d8b c2b04d84 c2b04d84 c2b04d8c 00000008 c0252594
00000000
00000002 c2b04d84 c2b04d84 00000000 00000002 c02a3cd1 c0483012
c2b04d84
41ed4d84 c2b04d84 c2614dc0 c2b04d8c c2614dc0 c02a3e43 00000000
c2614d20
Call Trace:
[<c0252594>] kstrdup+0x27/0x46
[<c02a3cd1>] sysfs_new_dirent+0x52/0xde
[<c02a3e43>] create_dir+0x78/0x177
[<c02a3f8b>] sysfs_create_dir+0x49/0x63
[<c02dde46>] kobject_shadow_add+0xdc/0x183
[<c02ddfd7>] kobject_register+0x19/0x30
[<c02de12d>] kobject_kset_add_dir+0x46/0x75
[<c02391de>] mod_sysfs_setup+0x2f/0x8e
[<c023a8cd>] sys_init_module+0x14c2/0x181e
[<c02025fa>] sysenter_past_esp+0x5f/0x85
[<ffffe410>] 0xffffe410
=======================
INFO: lockdep is turned off.
Code: 00 00 00 85 d2 74 06 83 7a 0c 00 75 17 89 54 24 04 83 c9 ff 89 fa 89
f0 89 2c 24 e8 04 e6 ff ff 89 c1 eb 0d 0f b7 42 0a 8b 4a 0c <8b> 04 81 89
42 0c 53 9d 89 c8 5b 5e 5b 5e
EIP: [<c0264b45>] __kmalloc_track_caller+0x4f/0x60 SS:ESP 0068:c21c5db8
BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():0, irqs_disabled():1
INFO: lockdep is turned off.
[<c02035ff>] dump_trace+0x68/0x1d9
[<c0203788>] show_trace_log_lvl+0x18/0x2c
[<c0204237>] show_trace+0xf/0x11
[<c020424b>] dump_stack+0x12/0x14
[<c022e88a>] down_read+0x15/0x49
[<c023e3e8>] acct_collect+0x38/0x140
[<c021e742>] do_exit+0x1d5/0x747
[<c0203d4c>] die+0x1e2/0x20e
[<c03ec148>] do_page_fault+0x476/0x549
[<c03eaa2a>] error_code+0x72/0x78
[<c0264b45>] __kmalloc_track_caller+0x4f/0x60
[<c0252594>] kstrdup+0x27/0x46
[<c02a3cd1>] sysfs_new_dirent+0x52/0xde
[<c02a3e43>] create_dir+0x78/0x177
[<c02a3f8b>] sysfs_create_dir+0x49/0x63
[<c02dde46>] kobject_shadow_add+0xdc/0x183
[<c02ddfd7>] kobject_register+0x19/0x30
[<c02de12d>] kobject_kset_add_dir+0x46/0x75
[<c02391de>] mod_sysfs_setup+0x2f/0x8e
[<c023a8cd>] sys_init_module+0x14c2/0x181e
[<c02025fa>] sysenter_past_esp+0x5f/0x85
[<ffffe410>] 0xffffe410
=======================
and the second one:
BUG: unable to handle kernel paging request at virtual address 75646f6d
printing eip:
c0263c14
*pde = 00000000
Oops: 0000 [#2]
PREEMPT SMP
Modules linked in:
CPU: 0
EIP: 0060:[<c0263c14>] Not tainted VLI
EFLAGS: 00010002 (2.6.22-rc2-mm1 #82)
EIP is at __kmalloc+0x51/0x62
eax: 00000000 ebx: 00000282 ecx: 75646f6d edx: c10705b0
esi: c05602c8 edi: c030a4d6 ebp: 000000d0 esp: c20c3db8
ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
Process kacpid (pid: 40, ti=c20c2000 task=c20841a0 task.ti=c20c2000)
Stack: 00000046 43455047 00000007 00000000 00000001 f8808ede c030a4d6
00000003
00000000 c048c578 00000000 c21fc4e0 c21fc4e0 00000000 c030a746
00000000
00000001 00000004 00000040 c20c3e38 f8808ede c21fc4e0 c21fc4e0
c2b49800
Call Trace:
[<c030a4d6>] acpi_ex_allocate_name_string+0x36/0xa2
[<c030a746>] acpi_ex_get_name_string+0x137/0x1c1
[<c0305d1e>] acpi_ds_create_operand+0x3a/0x1d6
[<c0305edb>] acpi_ds_create_operands+0x21/0x6e
[<c0304ee5>] acpi_ds_exec_end_op+0x76/0x3d1
[<c0313e65>] acpi_ps_parse_loop+0x5b4/0x76f
[<c03132a2>] acpi_ps_parse_aml+0x60/0x23d
[<c0314520>] acpi_ps_execute_method+0x11b/0x1bb
[<c0311841>] acpi_ns_evaluate+0x99/0xf0
[<c03093b5>] acpi_ev_asynch_execute_gpe_method+0xa2/0x108
[<c0302df7>] acpi_os_execute_deferred+0x22/0x30
[<c0228e01>] run_workqueue+0x77/0x121
[<c02296c0>] worker_thread+0xba/0xc6
[<c022bcdd>] kthread+0x38/0x5f
[<c020321b>] kernel_thread_helper+0x7/0x10
=======================
INFO: lockdep is turned off.
Code: 00 00 00 85 d2 74 06 83 7a 0c 00 75 17 89 54 24 04 83 c9 ff 89 ea 89
f0 89 3c 24 e8 35 f5 ff ff 89 c1 eb 0d 0f b7 42 0a 8b 4a 0c <8b> 04 81 89
42 0c 53 9d 89 c8 5d 5a 5b 5e
EIP: [<c0263c14>] __kmalloc+0x51/0x62 SS:ESP 0068:c20c3db8
(always the same address being dereferenced).
[1] http://www.jikos.cz/jikos/junk/.config
--
Jiri Kosina
On Mon, 28 May 2007, Jiri Kosina wrote:
> when trying to reproduce a bugreport in bugzilla, I am experiencing panics
> upon boot. The .config which causes this is at [1]
Please reboot with "slub_debug" to identify what causes this.
On Tue, 29 May 2007, Christoph Lameter wrote:
> > when trying to reproduce a bugreport in bugzilla, I am experiencing
> > panics upon boot. The .config which causes this is at [1]
> Please reboot with "slub_debug" to identify what causes this.
Hi Christoph,
with slub_debug, there is no panic (which just supports that there is a
race somewhere). The boot with slub_debug below up to the point where it
panics without slub_debug
Linux version 2.6.22-rc2-mm1 (root@box) (gcc version 4.1.3 20070302
(prerelease) (SUSE Linux)) #85 SMP PREEMPT Wed May 30 01:44:05 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
BIOS-e820: 000000003f680000 - 000000003f692000 (ACPI data)
BIOS-e820: 000000003f692000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6010
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259712
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 259712
DMI present.
ACPI: RSDP 000F5F80, 0014 (r0 PTLTD )
ACPI: RSDT 3F689EF2, 0048 (r1 PTLTD Capell00 6040000 LTP 0)
ACPI: FACP 3F691E25, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: DSDT 3F68B5C6, 685F (r1 INTEL CALISTGA 6040000 INTL 20050624)
ACPI: FACS 3F692FC0, 0040
ACPI: APIC 3F691E99, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: HPET 3F691F01, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: MCFG 3F691F39, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: BOOT 3F691F75, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: ASF! 3F691F9D, 0063 (r32 CETP CETP 6040000 PTL 1)
ACPI: SSDT 3F68AF77, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 3F68A8DB, 069C (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 3F689F3A, 0508 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
256162
Kernel command line: root=/dev/sda6 vga=normal resume=/dev/sda1 showopts
console=tty0 console=ttyS0,9600n8 slub_debug
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1833.519 MHz processor.
Console: colour VGA+ 80x25
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 992 kB
per task-struct memory footprint: 1200 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1012416k/1038848k available (1975k kernel code, 25728k reserved,
1495k data, 244k init, 121344k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0569000 - 0xc05a6000 ( 244 kB)
.data : 0xc03edd37 - 0xc0563b94 (1495 kB)
.text : 0xc0200000 - 0xc03edd37 (1975 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
SLUB: Genslabs=23, HWalign=64, Order=0-3, MinObjects=16, Processors=2,
Nodes=1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3671.10 BogoMIPS
(lpj=1835552)
kswapd reclaim order set to 3
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M CPU 000 @ 1.83GHz stepping 04
lockdep: not fixing up alternatives.
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3619.50 BogoMIPS
(lpj=1809754)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) M CPU 000 @ 1.83GHz stepping 04
Total of 2 processors activated (7290.61 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
*** SLUB kmalloc-8: Redzone Active@0xc20b6070 slab 0xc10727d0
offset=112 flags=0x10000c3 inuse=3 freelist=0xc20b60a8
Bytes b4 0xc20b6060: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a
........ZZZZZZZZ
Object 0xc20b6070: 30 39 2f 30 38 2f 30 35
09/08/05
Redzone 0xc20b6078: 00 cc cc cc
.???
FreePointer 0xc20b607c -> 0xc20b60a8
Last alloc: get_modalias+0x61/0x102 jiffies_ago=0 cpu=0 pid=1
Filler 0xc20b60a0: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c02035ff>] dump_trace+0x68/0x1d9
[<c0203788>] show_trace_log_lvl+0x18/0x2c
[<c0204237>] show_trace+0xf/0x11
[<c020424b>] dump_stack+0x12/0x14
[<c026296d>] check_object+0x64/0x238
[<c026305d>] __slab_free+0x19e/0x2bb
[<c02637f7>] kfree+0x7e/0x87
[<c03798a2>] get_modalias+0xc2/0x102
[<c0379924>] dmi_dev_uevent+0x27/0x3b
[<c0342f71>] dev_uevent+0x1b7/0x1e3
[<c02de4cf>] kobject_uevent_env+0x221/0x42c
[<c0342bae>] device_add+0x271/0x46d
[<c0587a5a>] dmi_id_init+0x253/0x268
[<c0569793>] kernel_init+0x147/0x2af
[<c020321b>] kernel_thread_helper+0x7/0x10
=======================
@@@ SLUB kmalloc-8: Restoring redzone (0xcc) from 0xc20b6078-0xc20b607b
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: d0000000-d01fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4230k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1180514947.216:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
ACPI: SSDT 3F68A625, 01FA (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F68A442, 015E (r1 PmRef Cpu0Cst 3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F68A81F, 00BC (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F68A5A0, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:02:00.3[C] -> GSI 18 (level, low) -> IRQ 17
0000:02:00.3: ttyS1 at I/O 0x2048 (irq = 17) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 244k freed
Write protecting the kernel text: 1976k
Write protecting the kernel read-only data: 1292k
input: AT Translated Set 2 keyboard as /class/input/input0
Boot logging started on /dev/ttyS0(/dev/console) at Wed May 30 08:49:20
2007
Trying manual resume from /dev/sda1
Creating d*** SLUB kmalloc-8: Redzone Active@0xc2266e70 slab 0xc1078650
evice nodes with offset=3696 flags=0x10000c3 inuse=67
freelist=0xc2266ea8
udev
Bytes b4 0xc2266e60: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a
........ZZZZZZZZ
Object 0xc2266e70: 30 39 2f 30 38 2f 30 35
09/08/05
Redzone 0xc2266e78: 00 cc cc cc
.???
FreePointer 0xc2266e7c -> 0xc2266ea8
Last alloc: get_modalias+0x61/0x102 jiffies_ago=495 cpu=1 pid=500
Filler 0xc2266ea0: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c02035ff>] dump_trace+0x68/0x1d9
[<c0203788>] show_trace_log_lvl+0x18/0x2c
[<c0204237>] show_trace+0xf/0x11
[<c020424b>] dump_stack+0x12/0x14
[<c026296d>] check_object+0x64/0x238
[<c026305d>] __slab_free+0x19e/0x2bb
[<c02637f7>] kfree+0x7e/0x87
[<c03798a2>] get_modalias+0xc2/0x102
[<c0379924>] dmi_dev_uevent+0x27/0x3b
[<c0342f71>] dev_uevent+0x1b7/0x1e3
[<c02de4cf>] kobject_uevent_env+0x221/0x42c
[<c0342345>] store_uevent+0x4c/0x55
[<c0341f33>] dev_attr_store+0x27/0x2c
[<c02a2e3b>] sysfs_write_file+0x118/0x144
[<c0267842>] vfs_write+0xa8/0x154
[<c0267e5b>] sys_write+0x41/0x67
[<c02025fa>] sysenter_past_esp+0x5f/0x85
[<ffffe410>] 0xffffe410
=======================
@@@ SLUB kmalloc-8: Restoring redzone (0xcc) from 0xc2266e78-0xc2266e7b
ACPI: Thermal Zone [TZ00] (37 C)
ACPI: Thermal Zone [TZ01] (37 C)
Loading fan
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
Loading edd
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Loading jbd
Loading ext3
...
--
Jiri Kosina