Heip!
(commit: "r8169: merge with version 6.001.00 of Realtek's r8169 driver")
In current 2.6.23-rc8 snapshot r8169 send performance is bad, around
32MB/s. In 2.6.22 it was around 83MB/s. Interestingly, the receive
performance has increased from around 85MB/s to 96MB/s at the same time!
Git bisect gave commit 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2 as the
culprit, and reverting it from the 2.6.23-rc8 increases send speed back to
.22 level. (It didn't revert cleanly and the file needed some cleaning up
by hand.)
Performance data:
(The other end of iperf is machine with kernel 2.6.22.6 and nForce3
built-in nic.)
2.6.22 (and 2.6.23-rc8 with that change reverted)
===cut
$ iperf -m -l32k -c gw -r
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to gw, TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[ 5] local 10.0.0.1 port 36068 connected with 10.0.0.254 port 5001
[ 5] 0.0-10.0 sec 832 MBytes 696 Mbits/sec
[ 5] MSS size 7148 bytes (MTU 7188 bytes, unknown interface)
[ 4] local 10.0.0.1 port 5001 connected with 10.0.0.254 port 59713
[ 4] 0.0-10.2 sec 825 MBytes 678 Mbits/sec
[ 4] MSS size 7148 bytes (MTU 7188 bytes, unknown interface)
$ vmstat 2
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 1960780 2948 32948 0 0 236 11 48 327 2 3 86 9
0 0 0 1960660 2948 32972 0 0 0 0 94 944 0 0 100 0
0 0 0 1960752 2952 32996 0 0 14 0 90 233 0 0 100 0
0 0 0 1960776 2952 32996 0 0 0 0 89 964 0 0 100 0
1 0 0 1959544 3044 33788 0 0 420 52 154 458 0 1 97 2
0 0 0 1940288 3080 34704 0 0 434 34 16075 2198 0 2 98 0
0 0 0 1940116 3080 34704 0 0 0 0 16464 2835 0 1 99 0
0 0 0 1940020 3080 34704 0 0 0 58 16590 2194 0 1 99 0
0 0 0 1940316 3080 34704 0 0 0 0 16489 2887 0 1 99 0
0 0 0 1940268 3080 34704 0 0 0 0 16505 2990 0 1 99 0
0 0 0 1957936 3080 34704 0 0 0 4 23482 24903 0 2 98 0
0 0 0 1957720 3080 34704 0 0 0 0 24270 29139 0 2 98 0
0 0 0 1957980 3080 34704 0 0 0 4 22045 27621 0 2 98 0
1 0 0 1958004 3080 34704 0 0 0 0 24383 30106 0 2 98 0
0 0 0 1957956 3080 34704 0 0 0 0 21984 27709 0 2 98 0
0 0 0 1958112 3080 34704 0 0 0 0 3083 5826 0 0 100 0
0 0 0 1958168 3080 34704 0 0 0 0 83 2392 0 0 100 0
===cut
2.6.23-rc8 without changes
===cut
$ iperf -m -l32k -c gw -r
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to gw, TCP port 5001
TCP window size: 73.0 KByte (default)
------------------------------------------------------------
[ 5] local 10.0.0.1 port 55265 connected with 10.0.0.254 port 5001
[ 5] 0.0-10.1 sec 328 MBytes 272 Mbits/sec
[ 5] MSS size 7148 bytes (MTU 7188 bytes, unknown interface)
[ 4] local 10.0.0.1 port 5001 connected with 10.0.0.254 port 41340
[ 4] 0.0-10.0 sec 964 MBytes 805 Mbits/sec
[ 4] MSS size 7148 bytes (MTU 7188 bytes, unknown interface)
$ vmstat 2
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 1961244 3756 31580 0 0 292 13 52 331 2 4 84 10
0 0 0 1959916 3756 32368 0 0 436 0 186 893 0 0 99 0
0 0 0 1944668 3756 32504 0 0 0 0 7141 2223 0 2 98 0
0 0 0 1948260 3756 32504 0 0 0 0 7012 2213 0 2 98 0
1 0 0 1946532 3756 32504 0 0 0 0 7001 2222 0 1 99 0
1 0 0 1942276 3756 32504 0 0 0 0 6996 2168 0 2 98 0
1 0 0 1943336 3756 32504 0 0 0 0 6946 2181 0 0 100 0
2 0 0 1959144 3848 33296 0 0 420 52 19020 24412 0 2 96 2
1 0 0 1959064 3884 33344 0 0 0 82 21825 30835 0 3 97 0
0 0 0 1959152 3884 33344 0 0 0 0 21816 32094 0 2 98 0
0 0 0 1959040 3884 33344 0 0 0 6 21850 31934 0 3 96 0
2 0 0 1959072 3884 33344 0 0 0 0 21812 32068 0 2 98 0
0 0 0 1959104 3884 33344 0 0 0 0 5247 9402 0 1 99 0
===cut
lspci
===cut
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc R580 [Radeon X1900]
01:00.1 Display controller: ATI Technologies Inc Unknown device 7264
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
04:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
===cut
lspci -vx, only eth0 device
===cut
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: ABIT Computer Corp. Unknown device 1083
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
I/O ports at ae00 [size=256]
Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
00: ec 10 67 81 07 00 b0 02 10 00 00 02 08 20 00 00
10: 01 ae 00 00 00 f0 cf fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 83 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 20 40
===cut
parts of .config (full .config available on request)
===cut
CONFIG_NO_HZ=y
CONFIG_HZ=1000
CONFIG_R8169=y
CONFIG_R8169_NAPI=y
===cut
I also tried with CONFIG_R8169_NAPI=n but that didn't make a difference.
ethtool -k eth0
===cut
Offload parameters for eth0:
Cannot get device udp large send offload settings: Operation not supported
rx-checksumming: on
tx-checksumming: on
scatter-gather: off
tcp segmentation offload: off
udp fragmentation offload: off
generic segmentation offload: off
===cut
I tried also other combinations. scatter-gather caused small performance
penalty, as well as not using jumbo frames (7200). Other settings didn't
matter.
//T
Timo Jantunen <[email protected]> :
[...]
> Git bisect gave commit 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2 as the
> culprit, and reverting it from the 2.6.23-rc8 increases send speed back to
> .22 level. (It didn't revert cleanly and the file needed some cleaning up
> by hand.)
You are welcome but you are late.
The patch below is scheduled for inclusion before 2.6.23. Please try it and
see if it makes a difference on top of 2.6.23-rc8 (full dmesg will be welcome
too).
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b85ab4a..c921ec3 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1228,7 +1228,10 @@ static void rtl8169_hw_phy_config(struct net_device *dev)
return;
}
- /* phy config for RTL8169s mac_version C chip */
+ if ((tp->mac_version != RTL_GIGA_MAC_VER_02) &&
+ (tp->mac_version != RTL_GIGA_MAC_VER_03))
+ return;
+
mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1
mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000
mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7
@@ -2567,6 +2570,15 @@ static void rtl8169_tx_interrupt(struct net_device *dev,
(TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) {
netif_wake_queue(dev);
}
+ /*
+ * 8168 hack: TxPoll requests are lost when the Tx packets are
+ * too close. Let's kick an extra TxPoll request when a burst
+ * of start_xmit activity is detected (if it is not detected,
+ * it is slow enough). -- FR
+ */
+ smp_rmb();
+ if (tp->cur_tx != dirty_tx)
+ RTL_W8(TxPoll, NPQ);
}
}
--
Ueimor
On Wed, 26 Sep 2007, Francois Romieu wrote:
> The patch below is scheduled for inclusion before 2.6.23. Please try it and
> see if it makes a difference on top of 2.6.23-rc8 (full dmesg will be welcome
> too).
Thanks for the quick reply and fix. Unfortunately the fix didn't help in my
case.
Iperf readings (send+receive) from
2.6.23-git (just before 6dccd... commit)
[ 5] 0.0-10.0 sec 830 MBytes 694 Mbits/sec
[ 4] 0.0-10.0 sec 842 MBytes 706 Mbits/sec
2.3.23-rc8 (clean)
[ 4] 0.0-10.0 sec 323 MBytes 270 Mbits/sec
[ 5] 0.0-10.0 sec 961 MBytes 802 Mbits/sec
2.3.23-rc8 and your patch
[ 5] 0.0-10.1 sec 326 MBytes 270 Mbits/sec
[ 4] 0.0-10.0 sec 958 MBytes 802 Mbits/sec
2.3.23-rc8 and 6dccd... reverted
[ 5] 0.0-10.1 sec 830 MBytes 692 Mbits/sec
[ 4] 0.0-10.0 sec 803 MBytes 673 Mbits/sec
and full dmesg from 2.3.23-rc8+your patch below. Dmesg from other versions
differed only by random noise caused by minor variations on bogomips
scores, async initializations etc. I can send them to you too, if you think
they are useful.
===cut
Linux version 2.6.23-rc8-fix (root@limbo) (gcc version 4.2.0 (Gentoo 4.2.0 p1.4)) #2 SMP Wed Sep 26 21:24:43 EEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f3640
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 524000) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 524000
On node 0 totalpages: 524000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292323 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.5 present.
ACPI: RSDP 000F77F0, 0014 (r0 IntelR)
ACPI: RSDT 7FEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEE3100, 4D1C (r1 INTELR AWRDACPI 1000 MSFT 3000000)
ACPI: FACS 7FEE0000, 0040
ACPI: MCFG 7FEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7FEE7E40, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
ACPI: SSDT 7FEE8860, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
Built 1 zonelists in Zone order. Total pages: 519907
Kernel command line: ro root=/dev/sdb2 [email protected]/eth0,[email protected]/ video=vesafb:ypan,mtrr:3 vga=0x0376
netconsole: local port 2001
netconsole: local IP 10.0.0.1
netconsole: interface eth0
netconsole: remote port 2001
netconsole: remote IP 10.0.0.254
netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2403.193 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072204k/2096000k available (3500k kernel code, 22736k reserved, 1264k data, 248k init, 1178496k highmem)
virtual kernel memory layout:
fixmap : 0xfff81000 - 0xfffff000 ( 504 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05af000 - 0xc05ed000 ( 248 kB)
.data : 0xc046b218 - 0xc05a739c (1264 kB)
.text : 0xc0100000 - 0xc046b218 (3500 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4808.00 BogoMIPS (lpj=2404003)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 17k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4805.33 BogoMIPS (lpj=2402669)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Booting processor 2/2 eip 2000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4805.34 BogoMIPS (lpj=2402672)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Booting processor 3/3 eip 2000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4805.35 BogoMIPS (lpj=2402676)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Total of 4 processors activated (19224.04 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 8712.000 MB/sec
xor: using function: pIII_sse (8712.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNK0] (IRQs *4 5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 *7 9 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:06: ioport range 0x400-0x4bf has been reserved
pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0a: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:0a: iomem range 0x7ff00000-0x7fffffff has been reserved
pnp: 00:0a: iomem range 0x7fee0000-0x7fefffff could not be reserved
pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fdd00000-fddfffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: c000-cfff
MEM window: fda00000-fdafffff
PREFETCH window: fd900000-fd9fffff
PCI: Bridge: 0000:00:1c.4
IO window: b000-bfff
MEM window: fd800000-fd8fffff
PREFETCH window: fde00000-fdefffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: fdc00000-fdcfffff
PREFETCH window: fdb00000-fdbfffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[email protected]>
highmem bounce pool size: 64 pages
NTFS driver 2.1.28 [Flags: R/O DEBUG].
SGI XFS with ACLs, no debug enabled
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 15000k, total 16384k
vesafb: mode is 1600x1200x32, linelength=6400, pages=1
vesafb: protected mode interface info at c000:a316
vesafb: pmi: set display start = c00ca3a4, set palette = c00ca466
vesafb: scrolling: ypan using protected mode interface, yres_virtual=2400
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7FEE7F80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
ACPI: SSDT 7FEE8440, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
ACPI: SSDT 7FEE85A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
ACPI: SSDT 7FEE8700, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
ACPI Error (dswstate-0226): No result objects! State=f7e4ec00 [20070126]
ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node c212a658), AE_AML_NO_RETURN_VALUE
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
loop: module loaded
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 23 (level, low) -> IRQ 17
eth0: RTL8169sc/8110sc at 0xf881a000, 00:50:8d:b2:37:3e, XID 18000000 IRQ 17
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 18
eth1: RTL8169sc/8110sc at 0xf881c000, 00:50:8d:b2:37:3f, XID 18000000 IRQ 18
netconsole: device eth0 not up yet, forcing it
r8169: eth0: link down
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #0
r8169: eth0: link up
console [netcon0] enabled
netconsole: network logging started
Linux video capture interface: v2.00
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 19
ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 19
ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 19
ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 19
ata5: SATA max UDMA/133 cmd 0xf881e300 ctl 0x00000000 bmdma 0x00000000 irq 19
ata6: SATA max UDMA/133 cmd 0xf881e380 ctl 0x00000000 bmdma 0x00000000 irq 19
r8169: eth0: link down
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: HDS722525VLSA80, V36OA63A, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
r8169: eth0: link up
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA HDS722525VLSA80 V36O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 >
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 cmd 0xf8820100 ctl 0x00000000 bmdma 0x00000000 irq 16
ata8: SATA max UDMA/133 cmd 0xf8820180 ctl 0x00000000 bmdma 0x00000000 irq 16
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0x0001bf00 ctl 0x0001be02 bmdma 0x0001bb00 irq 20
ata10: PATA max UDMA/100 cmd 0x0001bd00 ctl 0x0001bc02 bmdma 0x0001bb08 irq 20
ata9.00: ATAPI: LITE-ON DVDRW SOHW-1673S, JS02, max UDMA/66
ata9.00: configured for UDMA/66
scsi 8:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1673S JS02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr 8:0:0:0: Attached scsi generic sg4 type 5
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfdfff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 22, io base 0x0000fe00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000fc00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fa00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 2
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 21
abituguru3: found Abit uGuru3, motherboard ID: 001A (unknown)
coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1 933 MB/s
raid6: int32x2 960 MB/s
raid6: int32x4 750 MB/s
raid6: int32x8 675 MB/s
raid6: mmxx1 3039 MB/s
raid6: mmxx2 3531 MB/s
raid6: sse1x1 2062 MB/s
raid6: sse1x2 2753 MB/s
raid6: sse2x1 3761 MB/s
raid6: sse2x2 4382 MB/s
raid6: using algorithm sse2x2 (4382 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input4
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input5
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input6
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
#0: HDA Intel at 0xfdff4000 irq 18
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdd10 ...
md: adding sdd10 ...
md: sdd9 has different UUID to sdd10
md: sdd8 has different UUID to sdd10
md: sdd7 has different UUID to sdd10
md: sdd6 has different UUID to sdd10
md: sdd5 has different UUID to sdd10
md: sdd2 has different UUID to sdd10
md: adding sdc10 ...
md: sdc9 has different UUID to sdd10
md: sdc8 has different UUID to sdd10
md: sdc7 has different UUID to sdd10
md: sdc6 has different UUID to sdd10
md: sdc5 has different UUID to sdd10
md: sdc2 has different UUID to sdd10
md: adding sdb10 ...
md: sdb9 has different UUID to sdd10
md: sdb8 has different UUID to sdd10
md: sdb7 has different UUID to sdd10
md: sdb6 has different UUID to sdd10
md: sdb5 has different UUID to sdd10
md: created md5
md: bind<sdb10>
md: bind<sdc10>
md: bind<sdd10>
md: running: <sdd10><sdc10><sdb10>
raid5: device sdd10 operational as raid disk 2
raid5: device sdc10 operational as raid disk 1
raid5: device sdb10 operational as raid disk 0
raid5: allocated 3164kB for md5
raid5: raid level 5 set md5 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb10
disk 1, o:1, dev:sdc10
disk 2, o:1, dev:sdd10
md: considering sdd9 ...
md: adding sdd9 ...
md: sdd8 has different UUID to sdd9
md: sdd7 has different UUID to sdd9
md: sdd6 has different UUID to sdd9
md: sdd5 has different UUID to sdd9
md: sdd2 has different UUID to sdd9
md: adding sdc9 ...
md: sdc8 has different UUID to sdd9
md: sdc7 has different UUID to sdd9
md: sdc6 has different UUID to sdd9
md: sdc5 has different UUID to sdd9
md: sdc2 has different UUID to sdd9
md: adding sdb9 ...
md: sdb8 has different UUID to sdd9
md: sdb7 has different UUID to sdd9
md: sdb6 has different UUID to sdd9
md: sdb5 has different UUID to sdd9
md: created md4
md: bind<sdb9>
md: bind<sdc9>
md: bind<sdd9>
md: running: <sdd9><sdc9><sdb9>
raid5: device sdd9 operational as raid disk 2
raid5: device sdc9 operational as raid disk 1
raid5: device sdb9 operational as raid disk 0
raid5: allocated 3164kB for md4
raid5: raid level 5 set md4 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb9
disk 1, o:1, dev:sdc9
disk 2, o:1, dev:sdd9
md: considering sdd8 ...
md: adding sdd8 ...
md: sdd7 has different UUID to sdd8
md: sdd6 has different UUID to sdd8
md: sdd5 has different UUID to sdd8
md: sdd2 has different UUID to sdd8
md: adding sdc8 ...
md: sdc7 has different UUID to sdd8
md: sdc6 has different UUID to sdd8
md: sdc5 has different UUID to sdd8
md: sdc2 has different UUID to sdd8
md: adding sdb8 ...
md: sdb7 has different UUID to sdd8
md: sdb6 has different UUID to sdd8
md: sdb5 has different UUID to sdd8
md: created md3
md: bind<sdb8>
md: bind<sdc8>
md: bind<sdd8>
md: running: <sdd8><sdc8><sdb8>
raid5: device sdd8 operational as raid disk 2
raid5: device sdc8 operational as raid disk 1
raid5: device sdb8 operational as raid disk 0
raid5: allocated 3164kB for md3
raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb8
disk 1, o:1, dev:sdc8
disk 2, o:1, dev:sdd8
md: considering sdd7 ...
md: adding sdd7 ...
md: sdd6 has different UUID to sdd7
md: sdd5 has different UUID to sdd7
md: sdd2 has different UUID to sdd7
md: adding sdc7 ...
md: sdc6 has different UUID to sdd7
md: sdc5 has different UUID to sdd7
md: sdc2 has different UUID to sdd7
md: adding sdb7 ...
md: sdb6 has different UUID to sdd7
md: sdb5 has different UUID to sdd7
md: created md2
md: bind<sdb7>
md: bind<sdc7>
md: bind<sdd7>
md: running: <sdd7><sdc7><sdb7>
raid5: device sdd7 operational as raid disk 2
raid5: device sdc7 operational as raid disk 1
raid5: device sdb7 operational as raid disk 0
raid5: allocated 3164kB for md2
raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb7
disk 1, o:1, dev:sdc7
disk 2, o:1, dev:sdd7
md: considering sdd6 ...
md: adding sdd6 ...
md: sdd5 has different UUID to sdd6
md: sdd2 has different UUID to sdd6
md: adding sdc6 ...
md: sdc5 has different UUID to sdd6
md: sdc2 has different UUID to sdd6
md: adding sdb6 ...
md: sdb5 has different UUID to sdd6
md: created md1
md: bind<sdb6>
md: bind<sdc6>
md: bind<sdd6>
md: running: <sdd6><sdc6><sdb6>
raid5: device sdd6 operational as raid disk 2
raid5: device sdc6 operational as raid disk 1
raid5: device sdb6 operational as raid disk 0
raid5: allocated 3164kB for md1
raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb6
disk 1, o:1, dev:sdc6
disk 2, o:1, dev:sdd6
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd2 has different UUID to sdd5
md: adding sdc5 ...
md: sdc2 has different UUID to sdd5
md: adding sdb5 ...
md: created md0
md: bind<sdb5>
md: bind<sdc5>
md: bind<sdd5>
md: running: <sdd5><sdc5><sdb5>
raid5: device sdd5 operational as raid disk 2
raid5: device sdc5 operational as raid disk 1
raid5: device sdb5 operational as raid disk 0
raid5: allocated 3164kB for md0
raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
--- rd:3 wd:3
disk 0, o:1, dev:sdb5
disk 1, o:1, dev:sdc5
disk 2, o:1, dev:sdd5
md: considering sdd2 ...
md: adding sdd2 ...
md: adding sdc2 ...
md: created md6
md: bind<sdc2>
md: bind<sdd2>
md: running: <sdd2><sdc2>
raid1: raid set md6 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 248k freed
DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)
input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/input/input7
usbcore: registered new interface driver cinergyT2
Filesystem "dm-0": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
ReiserFS: dm-2: warning: read_super_block: found reiserfs format "3.6" with non-standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 32748, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-3: warning: read_super_block: found reiserfs format "3.6" with non-standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 32748, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ReiserFS: dm-4: warning: read_super_block: found reiserfs format "3.6" with non-standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 32748, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
ReiserFS: dm-5: found reiserfs format "3.6" with standard journal
ReiserFS: dm-5: using ordered data mode
ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-5: checking transaction log (dm-5)
ReiserFS: dm-5: Using r5 hash to sort names
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
NTFS volume version 3.1.
Adding 4194296k swap on /dev/vg/swap. Priority:1 extents:1 across:4194296k
Installing knfsd (copyright (C) 1996 [email protected]).
r8169: eth0: link up
r8169: eth0: link down
r8169: eth0: link up
SysRq : Changing Loglevel
Loglevel set to 9
===cyt
//T
On Wed, Sep 26, 2007 at 09:52:02PM +0300, Timo Jantunen wrote:
> On Wed, 26 Sep 2007, Francois Romieu wrote:
>
> > The patch below is scheduled for inclusion before 2.6.23. Please try it and
> > see if it makes a difference on top of 2.6.23-rc8 (full dmesg will be welcome
> > too).
>
> Thanks for the quick reply and fix. Unfortunately the fix didn't help in my
> case.
In another thread on LKML today, there has been some discussion about a
similar problem, which is caused by a locking bug in iperf which makes
it spin at 100% CPU. Ingo has posted a fix for this, please check the list.
Regards,
Willy
On Wed, 26 Sep 2007, Willy Tarreau wrote:
> On Wed, Sep 26, 2007 at 09:52:02PM +0300, Timo Jantunen wrote:
> > On Wed, 26 Sep 2007, Francois Romieu wrote:
> > > The patch below is scheduled for inclusion before 2.6.23. Please try it and
> > > see if it makes a difference on top of 2.6.23-rc8 (full dmesg will be welcome
> > > too).
> > Thanks for the quick reply and fix. Unfortunately the fix didn't help in my
> > case.
>
> In another thread on LKML today, there has been some discussion about a
> similar problem, which is caused by a locking bug in iperf which makes
> it spin at 100% CPU. Ingo has posted a fix for this, please check the list.
I noticed the problem originally with another program (playback of 720p
video to remote X using mplayer). And in my case the CPU usage is 2-3%
systime, <1% userspace so it doesn't seem to be anything to do with the
scheduler (I did try that "echo 1 > /proc/sys/kernel/sched_compat_yield"
workaround, too.)
//T
> Regards,
> Willy
Timo Jantunen <[email protected]> :
[...]
> Thanks for the quick reply and fix. Unfortunately the fix didn't help in my
> case.
Apply and try each patch of the attached tarball on top of 2.6.23-git
until the behavior changes (assuming it does).
Patch #000n applies on top of patch #000(n - 1).
Good night.
--
Ueimor
On Wed, 26 Sep 2007, Francois Romieu wrote:
> Apply and try each patch of the attached tarball on top of 2.6.23-git
> until the behavior changes (assuming it does).
>
> Patch #000n applies on top of patch #000(n - 1).
I tested the series on top of -rc8 and 0005 did the trick. And if I use
0005 only, I can get 93MB/s send and 97MB/s receive, so there is a nice
increase on send too since .22!
iperf numbers (send/receive):
revert.0001:[ 4] 0.0-10.1 sec 234 MBytes 194 Mbits/sec
revert.0001:[ 5] 0.0-10.0 sec 445 MBytes 373 Mbits/sec
revert.0002:[ 5] 0.0-10.0 sec 325 MBytes 272 Mbits/sec
revert.0002:[ 4] 0.0-10.1 sec 969 MBytes 802 Mbits/sec
revert.0003:[ 4] 0.0-10.1 sec 328 MBytes 272 Mbits/sec
revert.0003:[ 5] 0.0-10.0 sec 742 MBytes 622 Mbits/sec
revert.0004:[ 4] 0.0-10.2 sec 329 MBytes 271 Mbits/sec
revert.0004:[ 5] 0.0-10.0 sec 759 MBytes 637 Mbits/sec
revert.0005:[ 4] 0.0-10.1 sec 829 MBytes 691 Mbits/sec
revert.0005:[ 5] 0.0-10.0 sec 772 MBytes 647 Mbits/sec
revert.0005-only:[ 5] 0.0-10.0 sec 933 MBytes 780 Mbits/sec
revert.0005-only:[ 4] 0.0-10.1 sec 970 MBytes 806 Mbits/sec
//T
> Good night.
// /
....................................Timo Jantunen ......................
ZZZ (Used to represent :Kuunsäde 8 A 28: Email: [email protected] :
the sound of a person snoring.) :FIN-02210 Espoo: http://iki.fi/jeti :
Webster's Encyclopedic Unabridged :Finland : GSM+358-40-5763131 :
Dictionary of the English Language :...............:....................: