I built 2.6.24-git15 this morning and seem to have picked up a little
“funny” along the way – occasionally what should be a single key stroke
ends up spraying multiple characters on to my screen.
By this I mean I type “w” and get “wwwwwwwww” or whatever.
This has happened a number of times with random keys so I don't think
that it is a sticky key and I did not see this on previous builds.
Has anyone else had this happen to them? While they were sober that
is.
On Wed, 6 Feb 2008, Chris Holvenstot wrote:
> I built 2.6.24-git15 this morning and seem to have picked up a little
> "funny" along the way - occasionally what should be a single key stroke
> ends up spraying multiple characters on to my screen. By this I mean I
> type "w" and get "wwwwwwwww" or whatever. This has happened a number of
> times with random keys so I don't think that it is a sticky key and I
> did not see this on previous builds.
What keyboard is that? (USB/PS2?).
--
Jiri Kosina
Chris Holvenstot wrote:
> I built 2.6.24-git15 this morning and seem to have picked up a little
> “funny” along the way – occasionally what should be a single key stroke
> ends up spraying multiple characters on to my screen.
>
>
> By this I mean I type “w” and get “wwwwwwwww” or whatever.
>
>
> This has happened a number of times with random keys so I don't think
> that it is a sticky key and I did not see this on previous builds.
>
>
> Has anyone else had this happen to them? While they were sober that
> is.
>
This or similar has been going on for over a year now. At least on SuSE distros.
See https://bugzilla.novell.com/show_bug.cgi?id=223561
Comment 22 in particular.
Regards
Mark
Thank you for your response, Jiri -
On this system I am using a PS2 Keyboard - and let me stress that it is
only occasionaly that it happens - I have had 2.6.24-git15 up for about
2 hours now and have only seen it about a dozen times.
I also note one other thing - although my system is lightly loaded - at
this time of day I am pretty much just using email on an AMD 64 X2 4600+
with 2 gigs of of memory - I have noticed several times that I will be
typing away and nothing is appearing on the screen - and a few seconds
later - boom - there it all is.
There is no way an old fella like me should be able to out type a system
like this.
Chris
On Wed, 2008-02-06 at 14:28 +0100, Jiri Kosina wrote:
> On Wed, 6 Feb 2008, Chris Holvenstot wrote:
>
> > I built 2.6.24-git15 this morning and seem to have picked up a little
> > "funny" along the way - occasionally what should be a single key stroke
> > ends up spraying multiple characters on to my screen. By this I mean I
> > type "w" and get "wwwwwwwww" or whatever. This has happened a number of
> > times with random keys so I don't think that it is a sticky key and I
> > did not see this on previous builds.
>
> What keyboard is that? (USB/PS2?).
>
On Wed, 6 Feb 2008, Chris Holvenstot wrote:
> On this system I am using a PS2 Keyboard - and let me stress that it is
> only occasionaly that it happens - I have had 2.6.24-git15 up for about
> 2 hours now and have only seen it about a dozen times. I also note one
> other thing - although my system is lightly loaded - at this time of day
> I am pretty much just using email on an AMD 64 X2 4600+ with 2 gigs of
> of memory - I have noticed several times that I will be typing away and
> nothing is appearing on the screen - and a few seconds later - boom -
> there it all is.
It could be some timing problem. Does this happen also in console, or
only when running X?
Could you please try to
- boot with 'nohpet' kernel parameter
- taskset -p 0x00000002 <pid_of_Xserver> if this is a multi-CPU/core
machine and you are experiencing the problems only in X
Thanks,
--
Jiri Kosina
On Wed, 6 Feb 2008 14:54:21 +0100 (CET)
Jiri Kosina <[email protected]> wrote:
> On Wed, 6 Feb 2008, Chris Holvenstot wrote:
>
> > On this system I am using a PS2 Keyboard - and let me stress that it is
> > only occasionaly that it happens - I have had 2.6.24-git15 up for about
> > 2 hours now and have only seen it about a dozen times. I also note one
> > other thing - although my system is lightly loaded - at this time of day
> > I am pretty much just using email on an AMD 64 X2 4600+ with 2 gigs of
> > of memory - I have noticed several times that I will be typing away and
> > nothing is appearing on the screen - and a few seconds later - boom -
> > there it all is.
>
> It could be some timing problem. Does this happen also in console, or
> only when running X?
>
> Could you please try to
>
> - boot with 'nohpet' kernel parameter
> - taskset -p 0x00000002 <pid_of_Xserver> if this is a multi-CPU/core
> machine and you are experiencing the problems only in X
>
Perhaps something to CC linux-input on?
> Thanks,
>
> --
> Jiri Kosina
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Jiri -
I have several hours of running aith nohpet and X's affinity set to 2
instead of 3 and so far everything is running flawlessly.
Even though Mark Hounschell pointed me at this old Suse issue
(https://bugzilla.novell.com/show_bug.cgi?id=223561)
which has the same suggestion (taskset) as you made, for me this was
something new starting with 2.6.24-git15 - maybe something made a timing
issue fall a little closer to the edge.
Would you like me to try and further isolate things for you here by
either running with just nohpet OR just the taskset to change X's
affinity?
Once again thank you for your prompt (and effective) support on this
issue.
Chris
On Wed, 2008-02-06 at 14:54 +0100, Jiri Kosina wrote:
> On Wed, 6 Feb 2008, Chris Holvenstot wrote:
>
> > On this system I am using a PS2 Keyboard - and let me stress that it is
> > only occasionaly that it happens - I have had 2.6.24-git15 up for about
> > 2 hours now and have only seen it about a dozen times. I also note one
> > other thing - although my system is lightly loaded - at this time of day
> > I am pretty much just using email on an AMD 64 X2 4600+ with 2 gigs of
> > of memory - I have noticed several times that I will be typing away and
> > nothing is appearing on the screen - and a few seconds later - boom -
> > there it all is.
>
> It could be some timing problem. Does this happen also in console, or
> only when running X?
>
> Could you please try to
>
> - boot with 'nohpet' kernel parameter
> - taskset -p 0x00000002 <pid_of_Xserver> if this is a multi-CPU/core
> machine and you are experiencing the problems only in X
>
> Thanks,
>
On Wed, 6 Feb 2008, Chris Holvenstot wrote:
> I have several hours of running aith nohpet and X's affinity set to 2
> instead of 3 and so far everything is running flawlessly.
Great, so this definitely is some kind of timing issue, thanks for
verifying that.
> which has the same suggestion (taskset) as you made, for me this was
> something new starting with 2.6.24-git15 - maybe something made a timing
> issue fall a little closer to the edge.
Yes, could be some scheduler update that made the problem more visible. If
you'd had time to use git-bisect to find the exact commit that exposes
your problem, that might be interesting. But as you said that this is not
immediately reproducible, it might take ages.
> Would you like me to try and further isolate things for you here by
> either running with just nohpet OR just the taskset to change X's
> affinity?
Yes, that would help. Especially knowing whether running with 'nohpet'
fixes the problem would be nice.
--
Jiri Kosina
SUSE Labs
Jiri -
I have just started the build on the 2.6.24-git16 product and when it is
done I will come up with just the nohpet parameter - forgoing the
previouosly used taskset command.
Do you want me to do this using the git15 kernel I built yesterday, or
the new git16 kernel?
(I was not sure if you wanted me to introduce the variable of a new
kernel into the process while you are trying to diagnose the failure)
On the topic of doing a git bisect - I am recovering from heart surgery
last week and other than keeping up with the never ending stream of
email from the office, I am pretty much confined to the house - so I
have nothing but time on my hands.
However, I do my daily builds from the main tarball merged with the
daily git patch and don't have the infrustructure set up to do a git
bisect. If you can point me to a "how to" on how to set up and use git
I am more than willing to give it a shot.
Chris
On Thu, 2008-02-07 at 10:18 +0100, Jiri Kosina wrote:
> On Wed, 6 Feb 2008, Chris Holvenstot wrote:
>
> > I have several hours of running aith nohpet and X's affinity set to 2
> > instead of 3 and so far everything is running flawlessly.
>
> Great, so this definitely is some kind of timing issue, thanks for
> verifying that.
>
> > which has the same suggestion (taskset) as you made, for me this was
> > something new starting with 2.6.24-git15 - maybe something made a timing
> > issue fall a little closer to the edge.
>
> Yes, could be some scheduler update that made the problem more visible. If
> you'd had time to use git-bisect to find the exact commit that exposes
> your problem, that might be interesting. But as you said that this is not
> immediately reproducible, it might take ages.
>
> > Would you like me to try and further isolate things for you here by
> > either running with just nohpet OR just the taskset to change X's
> > affinity?
>
> Yes, that would help. Especially knowing whether running with 'nohpet'
> fixes the problem would be nice.
>
Jiri -
I have been up and running now for about a half hour – since I did not
hear your preference I stayed with git15 instead of jumping up to git16
in an attempt to avoid introducing any unwanted changes.
The only non-standard thing I did was to use the nohpet directive at
boot time - I did NOT enter the previously used taskset command to alter
X's affinity.
I have been banging away on my keyboard for about a half hour now with
no problems. While this is not conclusive on a 'soft' problem, from what
I experienced yesterday I would have expected to have seen the problem
by now.
Please let me know if there are any other items you would like to do or
options you would like me to try.
Chris
On Thu, 2008-02-07 at 10:18 +0100, Jiri Kosina wrote:
> On Wed, 6 Feb 2008, Chris Holvenstot wrote:
>
> > I have several hours of running aith nohpet and X's affinity set to 2
> > instead of 3 and so far everything is running flawlessly.
>
> Great, so this definitely is some kind of timing issue, thanks for
> verifying that.
>
> > which has the same suggestion (taskset) as you made, for me this was
> > something new starting with 2.6.24-git15 - maybe something made a timing
> > issue fall a little closer to the edge.
>
> Yes, could be some scheduler update that made the problem more visible. If
> you'd had time to use git-bisect to find the exact commit that exposes
> your problem, that might be interesting. But as you said that this is not
> immediately reproducible, it might take ages.
>
> > Would you like me to try and further isolate things for you here by
> > either running with just nohpet OR just the taskset to change X's
> > affinity?
>
> Yes, that would help. Especially knowing whether running with 'nohpet'
> fixes the problem would be nice.
>
On Thu, 7 Feb 2008, Chris Holvenstot wrote:
> I have been up and running now for about a half hour - since I did not
> hear your preference I stayed with git15 instead of jumping up to git16
> in an attempt to avoid introducing any unwanted changes.
>
> The only non-standard thing I did was to use the nohpet directive at
> boot time - I did NOT enter the previously used taskset command to alter
> X's affinity.
>
> I have been banging away on my keyboard for about a half hour now with
> no problems. While this is not conclusive on a 'soft' problem, from what
> I experienced yesterday I would have expected to have seen the problem
> by now.
>
> Please let me know if there are any other items you would like to do or
> options you would like me to try.
Thanks. So this clearly indicates that you are hitting either hardware
bug, or some bug in our HPET handling code.
Adding Ingo and Thomas to CC. Short summary -- Chris (and apparently other
people) are sometimes seeing repeated keypressess when HPET timer is used.
This doesn't happen when alternative clocksource is used.
Full thread: http://lkml.org/lkml/2008/2/6/100
--
Jiri Kosina
SUSE Labs
On Thu, 7 Feb 2008, Jiri Kosina wrote:
> On Thu, 7 Feb 2008, Chris Holvenstot wrote:
>
> > I have been up and running now for about a half hour - since I did not
> > hear your preference I stayed with git15 instead of jumping up to git16
> > in an attempt to avoid introducing any unwanted changes.
> >
> > The only non-standard thing I did was to use the nohpet directive at
> > boot time - I did NOT enter the previously used taskset command to alter
> > X's affinity.
> >
> > I have been banging away on my keyboard for about a half hour now with
> > no problems. While this is not conclusive on a 'soft' problem, from what
> > I experienced yesterday I would have expected to have seen the problem
> > by now.
> >
> > Please let me know if there are any other items you would like to do or
> > options you would like me to try.
>
> Thanks. So this clearly indicates that you are hitting either hardware
> bug, or some bug in our HPET handling code.
>
> Adding Ingo and Thomas to CC. Short summary -- Chris (and apparently other
> people) are sometimes seeing repeated keypressess when HPET timer is used.
> This doesn't happen when alternative clocksource is used.
>
> Full thread: http://lkml.org/lkml/2008/2/6/100
Now, it would be interesting to know what the detailed difference is,
when the system is booted with and without nohpet.
Chris, can you please provide the dmesg output and the output of
/proc/timer_list for each bootup ?
.config file would be interesting as well.
Thanks,
tglx
OK - I think that this is wat you are looking for. If there is
anything else I can proivde or if I have mucked up this simple cut and
paste just let me know.
Chris
/proc/timer_list after a "standard" boot up:
Timer List Version: v0.3
HRTIMER_MAX_CLOCK_BASES: 2
now at 145975685977 nsecs
cpu: 0
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1202395158972331114 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f731fee0>, tick_sched_timer, S:01
# expires at 145976000000 nsecs [in 314023 nsecs]
#1: <f731fee0>, it_real_fn, S:01
# expires at 145992695933 nsecs [in 17009956 nsecs]
#2: <f731fee0>, it_real_fn, S:01
# expires at 146449411457 nsecs [in 473725480 nsecs]
#3: <f731fee0>, it_real_fn, S:01
# expires at 147127669217 nsecs [in 1151983240 nsecs]
#4: <f731fee0>, hrtimer_wakeup, S:01
# expires at 148894085562 nsecs [in 2918399585 nsecs]
#5: <f731fee0>, hrtimer_wakeup, S:01
# expires at 149298827121 nsecs [in 3323141144 nsecs]
#6: <f731fee0>, hrtimer_wakeup, S:01
# expires at 162723437247 nsecs [in 16747751270 nsecs]
#7: <f731fee0>, hrtimer_wakeup, S:01
# expires at 168492312121 nsecs [in 22516626144 nsecs]
#8: <f731fee0>, it_real_fn, S:01
# expires at 170611081082 nsecs [in 24635395105 nsecs]
#9: <f731fee0>, hrtimer_wakeup, S:01
# expires at 326651677345 nsecs [in 180675991368 nsecs]
#10: <f731fee0>, hrtimer_wakeup, S:01
# expires at 3659678299700 nsecs [in 3513702613723 nsecs]
#11: <f731fee0>, it_real_fn, S:01
# expires at 28835194687544 nsecs [in 28689219001567 nsecs]
.expires_next : 145976000000 nsecs
.hres_active : 1
.nr_events : 37758
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 4294928789
cpu: 1
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1202395158972331114 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f731fee0>, tick_sched_timer, S:01
# expires at 145977000000 nsecs [in 1314023 nsecs]
#1: <f731fee0>, hrtimer_wakeup, S:01
# expires at 146450056749 nsecs [in 474370772 nsecs]
#2: <f731fee0>, it_real_fn, S:01
# expires at 146530328664 nsecs [in 554642687 nsecs]
#3: <f731fee0>, it_real_fn, S:01
# expires at 146532250137 nsecs [in 556564160 nsecs]
#4: <f731fee0>, hrtimer_wakeup, S:01
# expires at 146922960856 nsecs [in 947274879 nsecs]
#5: <f731fee0>, hrtimer_wakeup, S:01
# expires at 148523613563 nsecs [in 2547927586 nsecs]
#6: <f731fee0>, hrtimer_wakeup, S:01
# expires at 148933815562 nsecs [in 2958129585 nsecs]
#7: <f731fee0>, hrtimer_wakeup, S:01
# expires at 149290566563 nsecs [in 3314880586 nsecs]
#8: <f731fee0>, it_real_fn, S:01
# expires at 369336019712 nsecs [in 223360333735 nsecs]
#9: <f731fee0>, it_real_fn, S:01
# expires at 428337135469 nsecs [in 282361449492 nsecs]
#10: <f731fee0>, it_real_fn, S:01
# expires at 428337155862 nsecs [in 282361469885 nsecs]
.expires_next : 145977000000 nsecs
.hres_active : 1
.nr_events : 37563
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 4294928789
Tick Device: mode: 1
Clock Event Device: pit
max_delta_ns: 27461866
min_delta_ns: 12571
mult: 5124677
shift: 32
mode: 3
next_event: 9223372036854775807 nsecs
set_next_event: pit_next_event
set_mode: init_pit_timer
event_handler: tick_handle_oneshot_broadcast
tick_broadcast_mask: 00000000
tick_broadcast_oneshot_mask: 00000000
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 667653374
min_delta_ns: 1193
mult: 53963320
shift: 32
mode: 3
next_event: 145976000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 667653374
min_delta_ns: 1193
mult: 53963320
shift: 32
mode: 3
next_event: 145977000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
/proc/timer_list after a boot with nohpet
Timer List Version: v0.3
HRTIMER_MAX_CLOCK_BASES: 2
now at 171066146878 nsecs
cpu: 0
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1202395423739038399 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f716fee0>, tick_sched_timer, S:01
# expires at 171068000000 nsecs [in 1853122 nsecs]
#1: <f716fee0>, it_real_fn, S:01
# expires at 171083183094 nsecs [in 17036216 nsecs]
#2: <f716fee0>, hrtimer_wakeup, S:01
# expires at 175358934008 nsecs [in 4292787130 nsecs]
#3: <f716fee0>, hrtimer_wakeup, S:01
# expires at 182090152277 nsecs [in 11024005399 nsecs]
#4: <f716fee0>, hrtimer_wakeup, S:01
# expires at 325302655989 nsecs [in 154236509111 nsecs]
#5: <f716fee0>, it_real_fn, S:01
# expires at 435908045854 nsecs [in 264841898976 nsecs]
#6: <f716fee0>, hrtimer_wakeup, S:01
# expires at 3658204415582 nsecs [in 3487138268704 nsecs]
#7: <f716fee0>, it_real_fn, S:01
# expires at 6097909798313 nsecs [in 5926843651435 nsecs]
#8: <f716fee0>, it_real_fn, S:01
# expires at 6102868101962 nsecs [in 5931801955084 nsecs]
.expires_next : 171068000000 nsecs
.hres_active : 1
.nr_events : 44462
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 4294935062
cpu: 1
clock 0:
.index: 0
.resolution: 1 nsecs
.get_time: ktime_get_real
.offset: 1202395423739038399 nsecs
active timers:
clock 1:
.index: 1
.resolution: 1 nsecs
.get_time: ktime_get
.offset: 0 nsecs
active timers:
#0: <f716fee0>, hrtimer_wakeup, S:01
# expires at 171067250091 nsecs [in 1103213 nsecs]
#1: <f716fee0>, tick_sched_timer, S:01
# expires at 171069000000 nsecs [in 2853122 nsecs]
#2: <f716fee0>, it_real_fn, S:01
# expires at 171938332904 nsecs [in 872186026 nsecs]
#3: <f716fee0>, it_real_fn, S:01
# expires at 171944071955 nsecs [in 877925077 nsecs]
#4: <f716fee0>, it_real_fn, S:01
# expires at 172219525550 nsecs [in 1153378672 nsecs]
#5: <f716fee0>, it_real_fn, S:01
# expires at 172219574719 nsecs [in 1153427841 nsecs]
#6: <f716fee0>, hrtimer_wakeup, S:01
# expires at 197743378587 nsecs [in 26677231709 nsecs]
#7: <f716fee0>, it_real_fn, S:01
# expires at 198867018554 nsecs [in 27800871676 nsecs]
#8: <f716fee0>, it_real_fn, S:01
# expires at 487909125576 nsecs [in 316842978698 nsecs]
#9: <f716fee0>, it_real_fn, S:01
# expires at 487909145969 nsecs [in 316842999091 nsecs]
#10: <f716fee0>, it_real_fn, S:01
# expires at 28834687377400 nsecs [in 28663621230522 nsecs]
.expires_next : 171067250091 nsecs
.hres_active : 1
.nr_events : 43680
.nohz_mode : 0
.idle_tick : 0 nsecs
.tick_stopped : 0
.idle_jiffies : 0
.idle_calls : 0
.idle_sleeps : 0
.idle_entrytime : 0 nsecs
.idle_waketime : 0 nsecs
.idle_exittime : 0 nsecs
.idle_sleeptime : 0 nsecs
.last_jiffies : 0
.next_jiffies : 0
.idle_expires : 0 nsecs
jiffies: 4294935062
Tick Device: mode: 1
Clock Event Device: pit
max_delta_ns: 27461866
min_delta_ns: 12571
mult: 5124677
shift: 32
mode: 3
next_event: 9223372036854775807 nsecs
set_next_event: pit_next_event
set_mode: init_pit_timer
event_handler: tick_handle_oneshot_broadcast
tick_broadcast_mask: 00000000
tick_broadcast_oneshot_mask: 00000000
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 667648586
min_delta_ns: 1193
mult: 53963707
shift: 32
mode: 3
next_event: 171068000000 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
Tick Device: mode: 1
Clock Event Device: lapic
max_delta_ns: 667648586
min_delta_ns: 1193
mult: 53963707
shift: 32
mode: 3
next_event: 171067250091 nsecs
set_next_event: lapic_next_event
set_mode: lapic_timer_setup
event_handler: hrtimer_interrupt
The dmesg output after a "standard" boot:
[ 0.000000] Linux version 2.6.24-git15 (root@popeye) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Wed Feb 6 05:36:20 CST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5380] 000f5380
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177
[ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2412.397 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61548k reserved, 952k data, 336k init, 1179584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB)
[ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.084006] Calibrating delay using timer specific routine.. 4827.77 BogoMIPS (lpj=9655541)
[ 0.084047] Security Framework initialized
[ 0.084054] SELinux: Disabled at boot.
[ 0.084069] Mount-cache hash table entries: 512
[ 0.084198] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084200] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084201] CPU 0(2) -> Core 0
[ 0.084207] Compat vDSO mapped to ffffe000.
[ 0.084214] Checking 'hlt' instruction... OK.
[ 0.100222] ACPI: Core revision 20070126
[ 0.109783] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.109801] Booting processor 1/1 ip 4000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4825.08 BogoMIPS (lpj=9650168)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.200189] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.200199] Total of 2 processors activated (9652.85 BogoMIPS).
[ 0.200337] ENABLING IO-APIC IRQs
[ 0.200528] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.248015] Brought up 2 CPUs
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 1 2
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 2 1
[ 0.248015] net_namespace: 552 bytes
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] EISA bus registered
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: Using MMCONFIG
[ 0.248015] PCI: No mmconfig possible on device 00:18
[ 0.248015] Setting up standard PCI resources
[ 0.249896] ACPI: EC: Look up EC in DSDT
[ 0.256196] ACPI: Interpreter enabled
[ 0.256199] ACPI: (supports S0 S1 S5)
[ 0.256208] ACPI: Using IOAPIC for interrupt routing
[ 0.263393] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.263747] PCI: Transparent bridge - 0000:00:09.0
[ 0.264164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.264386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.317001] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317159] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317316] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.317471] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317627] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317784] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.317940] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.318097] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318253] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.318410] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.318566] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318723] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.318878] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319043] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.319206] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.319369] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319543] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.319712] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.319880] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.320117] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.320227] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.320400] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.320574] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.320749] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.320922] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.321095] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.321268] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.321441] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.321613] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.321794] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.321975] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.322155] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.322271] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.322287] pnp: PnP ACPI init
[ 0.322293] ACPI: bus type pnp registered
[ 0.326778] pnpacpi: exceeded the max number of mem resources: 12
[ 0.326859] pnp: PnP ACPI: found 13 devices
[ 0.326861] ACPI: ACPI bus type pnp unregistered
[ 0.326863] PnPBIOS: Disabled by ACPI PNP
[ 0.326960] PCI: Using ACPI for IRQ routing
[ 0.326964] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.336022] NET: Registered protocol family 8
[ 0.336022] NET: Registered protocol family 20
[ 0.340026] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.340026] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.340026] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.340026] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.340026] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340026] system 00:02: ioport range 0x290-0x29e has been reserved
[ 0.340026] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.366551] PCI: Bridge: 0000:00:09.0
[ 0.366554] IO window: a000-afff
[ 0.366556] MEM window: 0xfde00000-0xfdefffff
[ 0.366558] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.366560] PCI: Bridge: 0000:00:0b.0
[ 0.366562] IO window: 9000-9fff
[ 0.366564] MEM window: 0xfdd00000-0xfddfffff
[ 0.366566] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[ 0.366568] PCI: Bridge: 0000:00:0c.0
[ 0.366570] IO window: 8000-8fff
[ 0.366572] MEM window: 0xfdb00000-0xfdbfffff
[ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[ 0.366576] PCI: Bridge: 0000:00:0d.0
[ 0.366578] IO window: 7000-7fff
[ 0.366580] MEM window: 0xfd900000-0xfd9fffff
[ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
[ 0.366584] PCI: Bridge: 0000:00:0e.0
[ 0.366586] IO window: 6000-6fff
[ 0.366588] MEM window: 0xfa000000-0xfcffffff
[ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.366614] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.366618] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.366651] NET: Registered protocol family 2
[ 0.368027] Time: acpi_pm clocksource has been installed.
[ 0.368040] Switched to high resolution mode on CPU 0
[ 0.136022] Switched to high resolution mode on CPU 1
[ 0.384059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384059] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384059] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.384059] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.384059] TCP reno registered
[ 0.392059] checking if image is initramfs... it is
[ 3.070806] Freeing initrd memory: 40453k freed
[ 2.853085] audit: initializing netlink socket (disabled)
[ 2.853085] type=2000 audit(1202373561.068:1): initialized
[ 2.853085] highmem bounce pool size: 64 pages
[ 2.853085] VFS: Disk quotas dquot_6.5.1
[ 2.853085] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.853085] io scheduler noop registered
[ 2.853085] io scheduler anticipatory registered
[ 2.853085] io scheduler deadline registered
[ 2.853085] io scheduler cfq registered (default)
[ 2.853110] pci 0000:00:0b.0: Linking AER extended capability
[ 2.853114] pci 0000:00:0c.0: Linking AER extended capability
[ 2.853117] pci 0000:00:0d.0: Linking AER extended capability
[ 2.853120] pci 0000:00:0e.0: Linking AER extended capability
[ 2.853126] pci 0000:05:00.0: Boot video device
[ 2.853224] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 2.853239] assign_interrupt_mode Found MSI capability
[ 2.853240] Allocate Port Service[0000:00:0b.0:pcie00]
[ 2.853277] Allocate Port Service[0000:00:0b.0:pcie03]
[ 2.853332] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 2.853344] assign_interrupt_mode Found MSI capability
[ 2.853346] Allocate Port Service[0000:00:0c.0:pcie00]
[ 2.853382] Allocate Port Service[0000:00:0c.0:pcie03]
[ 2.853433] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 2.853446] assign_interrupt_mode Found MSI capability
[ 2.853447] Allocate Port Service[0000:00:0d.0:pcie00]
[ 2.853482] Allocate Port Service[0000:00:0d.0:pcie03]
[ 2.857126] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 2.857139] assign_interrupt_mode Found MSI capability
[ 2.857141] Allocate Port Service[0000:00:0e.0:pcie00]
[ 2.857177] Allocate Port Service[0000:00:0e.0:pcie03]
[ 2.857464] isapnp: Scanning for PnP cards...
[ 3.209993] isapnp: No Plug & Play device found
[ 3.234638] Real Time Clock Driver v1.12ac
[ 3.234765] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.234877] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.235386] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.236271] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.236277] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.236280] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.236531] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.239281] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.239317] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.239463] mice: PS/2 mouse device common for all mice
[ 3.239581] EISA: Probing bus 0 at eisa.0
[ 3.239591] Cannot allocate resource for EISA slot 4
[ 3.239595] Cannot allocate resource for EISA slot 6
[ 3.239596] Cannot allocate resource for EISA slot 7
[ 3.239598] Cannot allocate resource for EISA slot 8
[ 3.239599] EISA: Detected 0 cards.
[ 3.239917] TCP cubic registered
[ 3.239928] NET: Registered protocol family 1
[ 3.239956] Starting balanced_irq
[ 3.239993] Using IPI No-Shortcut mode
[ 3.240505] Freeing unused kernel memory: 336k freed
[ 3.265271] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.465460] fuse init (API version 7.9)
[ 4.467998] ACPI: Fan [FAN] (on)
[ 4.474455] ACPI: Thermal Zone [THRM] (22 C)
[ 4.869087] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 4.869091] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0
[ 4.869112] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 4.869116] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 4.869123] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 4.869130] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 4.869136] Probing IDE interface ide0...
[ 5.161737] usbcore: registered new interface driver usbfs
[ 5.161765] usbcore: registered new interface driver hub
[ 5.223172] usbcore: registered new device driver usb
[ 5.224415] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.164942] hdb: Maxtor 6L250R0, ATA DISK drive
[ 5.504008] hda: WDC WD2500JB-55REA0, ATA DISK drive
[ 5.504008] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.504008] hda: UDMA/100 mode selected
[ 5.504008] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.504008] hdb: UDMA/133 mode selected
[ 5.504008] Probing IDE interface ide1...
[ 5.800420] hdd: Maxtor 6Y120P0, ATA DISK drive
[ 6.144091] hdc: WDC WD2000BB-22GUC0, ATA DISK drive
[ 6.144091] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.144091] hdc: UDMA/100 mode selected
[ 6.144091] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.144091] hdd: UDMA/133 mode selected
[ 6.144091] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.485787] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.199065] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 6.199072] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
[ 6.199084] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 6.199087] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.199258] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 6.199285] ehci_hcd 0000:00:02.1: debug port 1
[ 6.199288] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 6.199295] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
[ 6.214898] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.214898] usb usb1: configuration #1 chosen from 1 choice
[ 6.214898] hub 1-0:1.0: USB hub found
[ 6.214898] hub 1-0:1.0: 10 ports detected
[ 6.636248] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.636248] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 6.636248] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
[ 6.636248] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 6.336449] SCSI subsystem initialized
[ 6.346135] libata version 3.00 loaded.
[ 6.811714] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 7.187585] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b
[ 7.187585] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 7.187585] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 7.187585] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
[ 7.187585] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 7.187585] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 7.187585] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 7.187585] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[ 7.246382] usb usb2: configuration #1 chosen from 1 choice
[ 7.246382] hub 2-0:1.0: USB hub found
[ 7.246382] hub 2-0:1.0: 10 ports detected
[ 7.357935] usb 1-7: configuration #1 chosen from 1 choice
[ 7.033519] sata_nv 0000:00:07.0: version 3.5
[ 7.033923] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 7.033931] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 7.033935] sata_nv 0000:00:07.0: Using ADMA mode
[ 7.033974] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 7.034526] scsi0 : sata_nv
[ 7.034526] scsi1 : sata_nv
[ 7.034526] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 7.034526] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 7.378485] hda: max request size: 512KiB
[ 7.395088] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 7.395139] hda: cache flushes supported
[ 7.395139] hda: hda1
[ 7.404883] hdb: max request size: 512KiB
[ 7.406821] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
[ 7.409804] hdb: cache flushes supported
[ 7.409820] hdb: hdb1
[ 7.422228] hdc: max request size: 512KiB
[ 7.423258] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63
[ 7.426067] hdc: cache flushes supported
[ 7.426090] hdc: hdc1 hdc2
[ 7.469639] hdd: max request size: 128KiB
[ 7.469639] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63
[ 7.469639] hdd: cache flushes supported
[ 7.469639] hdd: hdd1
[ 7.713993] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 7.848902] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.848902] kjournald starting. Commit interval 5 seconds
[ 7.532233] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.545121] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
[ 7.545121] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.949304] ata1.00: configured for UDMA/133
[ 7.970971] usb 2-3: configuration #1 chosen from 1 choice
[ 7.584331] usbcore: registered new interface driver libusual
[ 7.998490] Initializing USB Mass Storage driver...
[ 7.998615] scsi2 : SCSI emulation for USB Mass Storage devices
[ 7.998627] usb-storage: device found at 3
[ 7.998627] usb-storage: waiting for device to settle before scanning
[ 7.998647] scsi3 : SCSI emulation for USB Mass Storage devices
[ 7.998660] usbcore: registered new interface driver usb-storage
[ 7.998660] USB Mass Storage support registered.
[ 7.998660] usb-storage: device found at 2
[ 7.998660] usb-storage: waiting for device to settle before scanning
[ 8.041301] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.594004] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133
[ 8.594004] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.666104] ata2.00: configured for UDMA/133
[ 8.170106] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 8.170106] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.170106] scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
[ 8.170106] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.170106] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 8.170106] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 8.170106] sata_nv 0000:00:08.0: Using ADMA mode
[ 8.170106] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 8.170110] scsi4 : sata_nv
[ 8.170113] scsi5 : sata_nv
[ 8.170113] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 8.170113] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 9.032240] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.579192] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.638685] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 9.638685] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.720936] ata4.00: configured for UDMA/133
[ 9.112264] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 9.112264] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 14.066583] usb-storage: device scan complete
[ 14.067441] scsi 2:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0
[ 14.067996] usb-storage: device scan complete
[ 14.077934] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 14.086895] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 14.095834] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 14.106296] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 15.995308] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.209137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.937320] NET: Registered protocol family 10
[ 14.937660] lo: Disabled Privacy Extensions
[ 15.184671] input: Power Button (FF) as /class/input/input1
[ 15.241244] ACPI: Power Button (FF) [PWRF]
[ 15.241302] input: Power Button (CM) as /class/input/input2
[ 16.707287] input: PC Speaker as /class/input/input3
[ 15.298447] ACPI: Power Button (CM) [PWRB]
[ 17.452022] Driver 'sd' needs updating - please use bus_type methods
[ 17.452823] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 17.452844] sd 0:0:0:0: [sda] Write Protect is off
[ 17.452846] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.452879] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 17.452953] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 17.452970] sd 0:0:0:0: [sda] Write Protect is off
[ 17.452972] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.453003] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 17.453008] sda: sda1
[ 17.474060] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.474189] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 17.474209] sd 1:0:0:0: [sdb] Write Protect is off
[ 17.474211] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.474243] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.474299] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 17.474316] sd 1:0:0:0: [sdb] Write Protect is off
[ 17.474318] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 17.474349] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.474351] sdb:<6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 17.479384] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 17.495992] sdb1 sdb2
[ 17.496084] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 17.496172] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 17.496244] sd 5:0:0:0: [sdc] Write Protect is off
[ 17.496247] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 17.503760] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.503868] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 17.503887] sd 5:0:0:0: [sdc] Write Protect is off
[ 17.503889] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 17.503920] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.503923] sdc: sdc1
[ 17.525086] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 17.549482] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 17.561872] sd 3:0:0:1: [sde] Attached SCSI removable disk
[ 17.573540] sd 3:0:0:2: [sdf] Attached SCSI removable disk
[ 17.586785] sd 3:0:0:3: [sdg] Attached SCSI removable disk
[ 17.653084] Driver 'sr' needs updating - please use bus_type methods
[ 17.668816] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.668842] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 17.668858] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 17.668874] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 17.668888] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 17.668888] sd 3:0:0:1: Attached scsi generic sg5 type 0
[ 17.668888] sd 3:0:0:2: Attached scsi generic sg6 type 0
[ 17.668888] sd 3:0:0:3: Attached scsi generic sg7 type 0
[ 17.687987] sr0: scsi3-mmc drive: 32x/48x writer cd/rw xa/form2 cdda tray
[ 17.687993] Uniform CD-ROM driver Revision: 3.20
[ 17.688057] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 17.814351] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 17.861549] parport_pc 00:08: reported by Plug and Play ACPI
[ 17.861596] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.082684] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 18.082684] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 18.082684] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.456387] intel8x0_measure_ac97_clock: measured 54734 usecs
[ 18.456387] intel8x0: clocking to 46915
[ 18.879539] lp0: using parport0 (interrupt-driven).
[ 18.958808] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k
[ 19.311667] EXT3 FS on hda1, internal journal
[ 21.319190] kjournald starting. Commit interval 5 seconds
[ 21.324908] EXT3 FS on hdb1, internal journal
[ 21.324912] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.356817] kjournald starting. Commit interval 5 seconds
[ 21.365089] EXT3 FS on hdc1, internal journal
[ 21.365089] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.388235] kjournald starting. Commit interval 5 seconds
[ 21.396310] EXT3 FS on hdd1, internal journal
[ 21.396310] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.414567] kjournald starting. Commit interval 5 seconds
[ 21.426785] EXT3 FS on sda1, internal journal
[ 21.426785] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.468745] kjournald starting. Commit interval 5 seconds
[ 21.476952] EXT3 FS on sdb1, internal journal
[ 21.476952] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.512642] kjournald starting. Commit interval 5 seconds
[ 21.522036] EXT3 FS on sdb2, internal journal
[ 21.522039] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.555424] kjournald starting. Commit interval 5 seconds
[ 21.563537] EXT3 FS on sdc1, internal journal
[ 21.563537] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.598576] No dock devices found.
[ 22.621486] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 20.757088] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 22.928525] powernow-k8: MP systems not supported by PSB BIOS structure
[ 20.757101] powernow-k8: MP systems not supported by PSB BIOS structure
[ 26.534253] ppdev: user-space parallel port driver
[ 28.342837] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 28.342846] apm: disabled - APM is not SMP safe.
[ 26.092403] eth1: no IPv6 routers present
[ 45.280890] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
The dmesg output after a boot with "nohpet"
[ 0.000000] Linux version 2.6.24-git15 (root@popeye) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Wed Feb 6 05:36:20 CST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5380] 000f5380
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177
[ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2412.394 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61548k reserved, 952k data, 336k init, 1179584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB)
[ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.084006] Calibrating delay using timer specific routine.. 4827.76 BogoMIPS (lpj=9655528)
[ 0.084047] Security Framework initialized
[ 0.084054] SELinux: Disabled at boot.
[ 0.084069] Mount-cache hash table entries: 512
[ 0.084197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084199] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084201] CPU 0(2) -> Core 0
[ 0.084207] Compat vDSO mapped to ffffe000.
[ 0.084214] Checking 'hlt' instruction... OK.
[ 0.100222] ACPI: Core revision 20070126
[ 0.109785] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.109803] Booting processor 1/1 ip 4000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4825.07 BogoMIPS (lpj=9650141)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.200194] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.200204] Total of 2 processors activated (9652.83 BogoMIPS).
[ 0.200341] ENABLING IO-APIC IRQs
[ 0.200532] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.248015] Brought up 2 CPUs
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 1 2
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 2 1
[ 0.248015] net_namespace: 552 bytes
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] EISA bus registered
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: Using MMCONFIG
[ 0.248015] PCI: No mmconfig possible on device 00:18
[ 0.248015] Setting up standard PCI resources
[ 0.249884] ACPI: EC: Look up EC in DSDT
[ 0.256196] ACPI: Interpreter enabled
[ 0.256198] ACPI: (supports S0 S1 S5)
[ 0.256208] ACPI: Using IOAPIC for interrupt routing
[ 0.263422] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.263776] PCI: Transparent bridge - 0000:00:09.0
[ 0.264195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.264417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.317029] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317186] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317343] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.317498] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317653] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317810] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.317966] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.318122] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318278] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.318434] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.318590] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318747] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.318901] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319066] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.319229] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.319392] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319565] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.319734] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.319902] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.320140] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.320249] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.320423] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.320596] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.320771] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.320944] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.321116] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.321289] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.321461] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.321634] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.321814] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.321994] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.322174] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.322289] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.322306] pnp: PnP ACPI init
[ 0.322311] ACPI: bus type pnp registered
[ 0.326790] pnpacpi: exceeded the max number of mem resources: 12
[ 0.326871] pnp: PnP ACPI: found 13 devices
[ 0.326873] ACPI: ACPI bus type pnp unregistered
[ 0.326876] PnPBIOS: Disabled by ACPI PNP
[ 0.326973] PCI: Using ACPI for IRQ routing
[ 0.326976] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.336022] NET: Registered protocol family 8
[ 0.336022] NET: Registered protocol family 20
[ 0.340027] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.340027] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.340027] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.340027] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.340027] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.340027] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.340027] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340027] system 00:02: ioport range 0x290-0x29e has been reserved
[ 0.340027] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.340027] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.366551] PCI: Bridge: 0000:00:09.0
[ 0.366554] IO window: a000-afff
[ 0.366556] MEM window: 0xfde00000-0xfdefffff
[ 0.366558] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.366560] PCI: Bridge: 0000:00:0b.0
[ 0.366562] IO window: 9000-9fff
[ 0.366564] MEM window: 0xfdd00000-0xfddfffff
[ 0.366566] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[ 0.366568] PCI: Bridge: 0000:00:0c.0
[ 0.366570] IO window: 8000-8fff
[ 0.366572] MEM window: 0xfdb00000-0xfdbfffff
[ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[ 0.366576] PCI: Bridge: 0000:00:0d.0
[ 0.366578] IO window: 7000-7fff
[ 0.366580] MEM window: 0xfd900000-0xfd9fffff
[ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
[ 0.366584] PCI: Bridge: 0000:00:0e.0
[ 0.366586] IO window: 6000-6fff
[ 0.366588] MEM window: 0xfa000000-0xfcffffff
[ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.366614] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.366619] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.366651] NET: Registered protocol family 2
[ 0.368027] Time: acpi_pm clocksource has been installed.
[ 0.368040] Switched to high resolution mode on CPU 0
[ 0.136022] Switched to high resolution mode on CPU 1
[ 0.384058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384058] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384058] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.384058] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.384058] TCP reno registered
[ 0.392059] checking if image is initramfs... it is
[ 3.070820] Freeing initrd memory: 40453k freed
[ 2.853113] audit: initializing netlink socket (disabled)
[ 2.853113] type=2000 audit(1202373826.068:1): initialized
[ 2.853113] highmem bounce pool size: 64 pages
[ 2.853113] VFS: Disk quotas dquot_6.5.1
[ 2.853113] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.853113] io scheduler noop registered
[ 2.853113] io scheduler anticipatory registered
[ 2.853113] io scheduler deadline registered
[ 2.853113] io scheduler cfq registered (default)
[ 2.853138] pci 0000:00:0b.0: Linking AER extended capability
[ 2.853142] pci 0000:00:0c.0: Linking AER extended capability
[ 2.853145] pci 0000:00:0d.0: Linking AER extended capability
[ 2.853148] pci 0000:00:0e.0: Linking AER extended capability
[ 2.853153] pci 0000:05:00.0: Boot video device
[ 2.853252] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 2.853266] assign_interrupt_mode Found MSI capability
[ 2.853268] Allocate Port Service[0000:00:0b.0:pcie00]
[ 2.853306] Allocate Port Service[0000:00:0b.0:pcie03]
[ 2.853360] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 2.853372] assign_interrupt_mode Found MSI capability
[ 2.853374] Allocate Port Service[0000:00:0c.0:pcie00]
[ 2.853410] Allocate Port Service[0000:00:0c.0:pcie03]
[ 2.853461] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 2.853474] assign_interrupt_mode Found MSI capability
[ 2.853476] Allocate Port Service[0000:00:0d.0:pcie00]
[ 2.857122] Allocate Port Service[0000:00:0d.0:pcie03]
[ 2.857176] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 2.857188] assign_interrupt_mode Found MSI capability
[ 2.857190] Allocate Port Service[0000:00:0e.0:pcie00]
[ 2.857226] Allocate Port Service[0000:00:0e.0:pcie03]
[ 2.857515] isapnp: Scanning for PnP cards...
[ 3.210044] isapnp: No Plug & Play device found
[ 3.234537] Real Time Clock Driver v1.12ac
[ 3.234660] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.234770] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.235257] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.236083] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.236089] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.236092] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.236335] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.239234] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.239239] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.467643] mice: PS/2 mouse device common for all mice
[ 3.467797] EISA: Probing bus 0 at eisa.0
[ 3.467809] Cannot allocate resource for EISA slot 4
[ 3.467813] Cannot allocate resource for EISA slot 6
[ 3.467814] Cannot allocate resource for EISA slot 7
[ 3.467816] Cannot allocate resource for EISA slot 8
[ 3.467817] EISA: Detected 0 cards.
[ 3.468144] TCP cubic registered
[ 3.468156] NET: Registered protocol family 1
[ 3.468183] Starting balanced_irq
[ 3.468228] Using IPI No-Shortcut mode
[ 3.468758] Freeing unused kernel memory: 336k freed
[ 3.265766] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.419842] fuse init (API version 7.9)
[ 4.672567] ACPI: Fan [FAN] (on)
[ 4.430555] ACPI: Thermal Zone [THRM] (22 C)
[ 4.751276] SCSI subsystem initialized
[ 4.769714] libata version 3.00 loaded.
[ 5.040104] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 5.040108] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0
[ 5.040129] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 5.040132] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 5.040140] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 5.040147] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 5.040152] Probing IDE interface ide0...
[ 4.824409] usbcore: registered new interface driver usbfs
[ 4.824434] usbcore: registered new interface driver hub
[ 4.853793] usbcore: registered new device driver usb
[ 4.963266] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.326081] hdb: Maxtor 6L250R0, ATA DISK drive
[ 5.679727] hda: WDC WD2500JB-55REA0, ATA DISK drive
[ 5.679727] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.679727] hda: UDMA/100 mode selected
[ 5.679727] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.679727] hdb: UDMA/133 mode selected
[ 5.679727] Probing IDE interface ide1...
[ 5.984712] hdd: Maxtor 6Y120P0, ATA DISK drive
[ 6.338211] hdc: WDC WD2000BB-22GUC0, ATA DISK drive
[ 6.338231] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.339438] hdc: UDMA/100 mode selected
[ 6.339595] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.339595] hdd: UDMA/133 mode selected
[ 6.339595] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.379258] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.400200] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.400516] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 6.400523] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[ 6.400528] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 6.411189] hda: max request size: 512KiB
[ 6.424786] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 6.424835] hda: cache flushes supported
[ 6.424835] hda: hda1
[ 6.436138] hdb: max request size: 512KiB
[ 6.436986] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
[ 6.439864] hdb: cache flushes supported
[ 6.439886] hdb: hdb1
[ 6.442458] hdc: max request size: 512KiB
[ 6.443912] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63
[ 6.447335] hdc: cache flushes supported
[ 6.447335] hdc: hdc1 hdc2
[ 6.495359] hdd: max request size: 128KiB
[ 6.495472] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63
[ 6.495588] hdd: cache flushes supported
[ 6.495588] hdd: hdd1
[ 6.523111] kjournald starting. Commit interval 5 seconds
[ 6.870268] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.025516] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b
[ 7.025516] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 6.657566] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 6.657577] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 6.657592] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 6.657595] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.657936] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 6.657966] ehci_hcd 0000:00:02.1: debug port 1
[ 6.657969] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 6.657978] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 6.673503] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.673606] usb usb1: configuration #1 chosen from 1 choice
[ 6.673618] hub 1-0:1.0: USB hub found
[ 6.673618] hub 1-0:1.0: 10 ports detected
[ 7.168019] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 7.168028] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
[ 7.168041] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 7.168044] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 7.168077] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 7.168091] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[ 7.240780] usb usb2: configuration #1 chosen from 1 choice
[ 7.240780] hub 2-0:1.0: USB hub found
[ 7.240780] hub 2-0:1.0: 10 ports detected
[ 7.370809] sata_nv 0000:00:07.0: version 3.5
[ 7.370809] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 7.370809] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 7.370809] sata_nv 0000:00:07.0: Using ADMA mode
[ 7.370809] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 7.370812] scsi0 : sata_nv
[ 7.370816] scsi1 : sata_nv
[ 7.370816] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 7.370816] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 7.275023] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 7.429843] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.439608] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
[ 7.439611] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.948388] ata1.00: configured for UDMA/133
[ 7.978995] usb 1-7: configuration #1 chosen from 1 choice
[ 8.337925] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 7.956389] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.582814] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133
[ 8.582814] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.610884] usb 2-3: configuration #1 chosen from 1 choice
[ 8.667095] ata2.00: configured for UDMA/133
[ 8.667189] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 8.667196] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.667296] scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
[ 8.667300] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.667729] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 8.667733] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 8.667736] sata_nv 0000:00:08.0: Using ADMA mode
[ 8.667783] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 8.667906] scsi2 : sata_nv
[ 8.667954] scsi3 : sata_nv
[ 8.668065] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 8.668067] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 8.392370] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.860407] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.911357] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 8.911357] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.792984] ata4.00: configured for UDMA/133
[ 9.810963] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 9.810970] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 14.463599] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.623482] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.267342] input: Power Button (FF) as /class/input/input1
[ 14.709913] input: PC Speaker as /class/input/input2
[ 13.326727] ACPI: Power Button (FF) [PWRF]
[ 13.326779] input: Power Button (CM) as /class/input/input3
[ 14.840867] ACPI: Power Button (CM) [PWRB]
[ 14.916284] NET: Registered protocol family 10
[ 14.916685] lo: Disabled Privacy Extensions
[ 14.985694] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 14.985694] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 13.846806] usbcore: registered new interface driver libusual
[ 15.353259] Driver 'sd' needs updating - please use bus_type methods
[ 15.353672] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 15.353693] sd 0:0:0:0: [sda] Write Protect is off
[ 15.353695] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.353728] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 15.353795] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 15.353812] sd 0:0:0:0: [sda] Write Protect is off
[ 15.353814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.353845] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 15.353849] sda: sda1
[ 15.383168] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.383168] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 15.383168] sd 1:0:0:0: [sdb] Write Protect is off
[ 15.383168] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 15.383168] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.383168] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 15.383168] sd 1:0:0:0: [sdb] Write Protect is off
[ 15.383168] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 15.383168] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.383168] sdb: sdb1 sdb2
[ 15.408986] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 15.408986] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 15.408986] sd 3:0:0:0: [sdc] Write Protect is off
[ 15.408986] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 15.408986] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.408986] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 15.408986] sd 3:0:0:0: [sdc] Write Protect is off
[ 15.408986] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 15.408986] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.408986] sdc: sdc1
[ 15.429895] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 15.719256] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 15.730069] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.730069] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.755014] Initializing USB Mass Storage driver...
[ 15.755928] scsi4 : SCSI emulation for USB Mass Storage devices
[ 14.206504] usb-storage: device found at 3
[ 14.206504] usb-storage: waiting for device to settle before scanning
[ 15.756257] scsi5 : SCSI emulation for USB Mass Storage devices
[ 14.206536] usb-storage: device found at 2
[ 14.206536] usb-storage: waiting for device to settle before scanning
[ 15.756424] usbcore: registered new interface driver usb-storage
[ 15.756428] USB Mass Storage support registered.
[ 14.335627] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.335652] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 14.335672] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 16.248269] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 16.248275] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 16.248303] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.639649] intel8x0_measure_ac97_clock: measured 54728 usecs
[ 16.639649] intel8x0: clocking to 46910
[ 17.113613] lp0: using parport0 (interrupt-driven).
[ 17.203117] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k
[ 17.547434] EXT3 FS on hda1, internal journal
[ 19.508896] kjournald starting. Commit interval 5 seconds
[ 19.516971] EXT3 FS on hdb1, internal journal
[ 19.516971] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.545321] kjournald starting. Commit interval 5 seconds
[ 19.553583] EXT3 FS on hdc1, internal journal
[ 19.553583] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.575974] kjournald starting. Commit interval 5 seconds
[ 19.582043] EXT3 FS on hdd1, internal journal
[ 19.582046] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.600129] kjournald starting. Commit interval 5 seconds
[ 19.621869] EXT3 FS on sda1, internal journal
[ 19.621869] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.668531] kjournald starting. Commit interval 5 seconds
[ 19.675465] EXT3 FS on sdb1, internal journal
[ 19.675468] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.720384] kjournald starting. Commit interval 5 seconds
[ 19.727594] EXT3 FS on sdb2, internal journal
[ 19.727597] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.760237] kjournald starting. Commit interval 5 seconds
[ 19.769674] EXT3 FS on sdc1, internal journal
[ 19.769674] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.762773] No dock devices found.
[ 20.784786] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 18.912728] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 21.110634] powernow-k8: MP systems not supported by PSB BIOS structure
[ 18.912740] powernow-k8: MP systems not supported by PSB BIOS structure
[ 21.808233] usb-storage: device scan complete
[ 21.809859] usb-storage: device scan complete
[ 21.809900] scsi 4:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0
[ 21.809900] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 21.819870] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 21.829805] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 21.838587] scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 21.847216] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 21.860864] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 21.860907] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 21.877439] sd 5:0:0:1: [sde] Attached SCSI removable disk
[ 21.877478] sd 5:0:0:1: Attached scsi generic sg5 type 0
[ 21.889351] sd 5:0:0:2: [sdf] Attached SCSI removable disk
[ 21.889351] sd 5:0:0:2: Attached scsi generic sg6 type 0
[ 19.605322] sd 5:0:0:3: [sdg] Attached SCSI removable disk
[ 19.605365] sd 5:0:0:3: Attached scsi generic sg7 type 0
[ 21.959965] Driver 'sr' needs updating - please use bus_type methods
[ 21.991019] sr0: scsi3-mmc drive: 32x/48x writer cd/rw xa/form2 cdda tray
[ 21.991030] Uniform CD-ROM driver Revision: 3.20
[ 21.991093] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 25.027809] ppdev: user-space parallel port driver
[ 27.068782] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 27.068782] apm: disabled - APM is not SMP safe.
[ 28.019355] eth1: no IPv6 routers present
[ 44.259491] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
The config file used to build the kerne. in question:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-git15
# Wed Feb 6 05:02:26 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_RCU_TRACE=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_EFI=y
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=2000
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
# CONFIG_MCA_PROC_FS is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_SIMPLE is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
# CONFIG_MTD_ONENAND_SIM is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
CONFIG_MSI_LAPTOP=m
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=m
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_FD_MCS=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IBMMCA=m
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
# CONFIG_IBMMCA_SCSI_DEV_RESET is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR_D700=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_NCR_Q720=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=m
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_QDI=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RZ1000=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_ELMC=m
CONFIG_ELMC_II=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRAMCA=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
CONFIG_NE2_MCA=m
CONFIG_IBMLANA=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_CS89x0=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_MADGEMC=m
CONFIG_SMCTR=m
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
# CONFIG_PC300TOO is not set
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_WISTRON_BTNS=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_M52790 is not set
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
# CONFIG_VIDEO_VP27SMPX is not set
#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_TCM825X is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7191=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
# CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR is not set
# CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 is not set
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
# CONFIG_RADIO_TYPHOON_PROC_FS is not set
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TDA827X=m
# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
CONFIG_DVB_TUNER_MT2060=m
CONFIG_DVB_TUNER_MT2266=m
# CONFIG_DVB_TUNER_MT2131 is not set
CONFIG_DVB_TUNER_DIB0070=m
# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_TUNER=m
# CONFIG_VIDEO_TUNER_CUSTOMIZE is not set
CONFIG_TUNER_XC2028=m
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_TUNER_TDA9887=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
CONFIG_FB_IMAC=y
# CONFIG_FB_HECUBA is not set
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
CONFIG_FB_GEODE_GX=m
# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_LTV350QV is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
#
# ISA devices
#
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
# CONFIG_SND_SC6000 is not set
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=y
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SIS7019 is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_AMD5536UDC=y
CONFIG_USB_AMD5536UDC=m
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_CAPABILITIES is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
> Chris, can you please provide the dmesg output and the output of
> /proc/timer_list for each bootup ?
>
> .config file would be interesting as well.
>
> Thanks,
> tglx
On Thu, 7 Feb 2008, Chris Holvenstot wrote:
> OK - I think that this is wat you are looking for. If there is
> anything else I can proivde or if I have mucked up this simple cut and
> paste just let me know.
>
> /proc/timer_list after a "standard" boot up:
> Tick Device: mode: 1
> Clock Event Device: pit
> /proc/timer_list after a boot with nohpet
> Tick Device: mode: 1
> Clock Event Device: pit
Both use PIT, so no hpet involved
> The dmesg output after a "standard" boot:
> [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
> [ 0.368027] Time: acpi_pm clocksource has been installed.
> The dmesg output after a boot with "nohpet"
> [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet
> [ 0.368027] Time: acpi_pm clocksource has been installed.
Both boots use acpi_pm clocksource and there is nowhere a sign of HPET
in the logs except the "nohpet" on the command line.
/me is confused
How does "nohpet" on the command line influence the behaviour, when
there is no hpet available at all.
Thanks,
tglx
Thomas -
I hope that, from at least my perspective, your question is rhetorical.
I am fully willing to publicly admit that I don't have a clue. About
much of anything. I will even admit that until prompted by Jiri
yesterday I had never even heard of the nohpet directive for the boot
line.
I am willing to do whatever I can to help isolate and or resolve this
issue, but to do so I need one of you experts to firmly grab hold of
some portion of my anatomy and guide me in the right direction.
Chris
On Thu, 2008-02-07 at 17:13 +0100, Thomas Gleixner wrote:
> On Thu, 7 Feb 2008, Chris Holvenstot wrote:
>
> > OK - I think that this is wat you are looking for. If there is
> > anything else I can proivde or if I have mucked up this simple cut and
> > paste just let me know.
> >
> > /proc/timer_list after a "standard" boot up:
> > Tick Device: mode: 1
> > Clock Event Device: pit
>
> > /proc/timer_list after a boot with nohpet
> > Tick Device: mode: 1
> > Clock Event Device: pit
>
> Both use PIT, so no hpet involved
>
> > The dmesg output after a "standard" boot:
>
> > [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
> > [ 0.368027] Time: acpi_pm clocksource has been installed.
>
>
> > The dmesg output after a boot with "nohpet"
>
> > [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet
> > [ 0.368027] Time: acpi_pm clocksource has been installed.
>
> Both boots use acpi_pm clocksource and there is nowhere a sign of HPET
> in the logs except the "nohpet" on the command line.
>
> /me is confused
>
> How does "nohpet" on the command line influence the behaviour, when
> there is no hpet available at all.
>
> Thanks,
> tglx
>
>
Chris,
On Thu, 7 Feb 2008, Chris Holvenstot wrote:
> Thomas -
>
> I hope that, from at least my perspective, your question is rhetorical.
Yeah. The non rhetorical one was directed to Jiri. :)
> I am fully willing to publicly admit that I don't have a clue. About
> much of anything. I will even admit that until prompted by Jiri
> yesterday I had never even heard of the nohpet directive for the boot
> line.
No problem. At the moment I'm equally clueless :)
> I am willing to do whatever I can to help isolate and or resolve this
> issue, but to do so I need one of you experts to firmly grab hold of
> some portion of my anatomy and guide me in the right direction.
Can you please apply the following patch, boot w/o nohpet and provide
the dmesg output ?
Thanks,
tglx
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 429d084..4e98241 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -375,8 +375,10 @@ int __init hpet_enable(void)
{
unsigned long id;
- if (!is_hpet_capable())
+ if (!is_hpet_capable()) {
+ printk(KERN_INFO "HPET not available\n");
return 0;
+ }
hpet_set_mapping();
@@ -392,6 +394,7 @@ int __init hpet_enable(void)
* information and the number of channels
*/
id = hpet_readl(HPET_ID);
+ printk(KERN_INFO "HPET available. ID = %lx\n", id);
#ifdef CONFIG_HPET_EMULATE_RTC
/*
@@ -412,6 +415,7 @@ int __init hpet_enable(void)
return 0;
out_nohpet:
+ printk(KERN_INFO "HPET disabled\n");
hpet_clear_mapping();
boot_hpet_disable = 1;
return 0;
Thomas -
I believe that the following is the output you are looking for - sorry
for the delay - between doctors and grandkids I was ready for a few pain
pills and a long nap.
I suspect you often feel the same way after dealing with some who post
here.
Thank you for your support
Chris
[ 0.000000] Linux version 2.6.24-git15-ch2 (root@popeye) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #3 SMP PREEMPT Thu
Feb 7 22:00:10 CST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5380] 000f5380
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177
[ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2412.392 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61568k reserved, 952k data, 336k init, 1179584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB)
[ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] HPET not available
[ 0.084006] Calibrating delay using timer specific routine.. 4827.75 BogoMIPS (lpj=9655519)
[ 0.084047] Security Framework initialized
[ 0.084054] SELinux: Disabled at boot.
[ 0.084069] Mount-cache hash table entries: 512
[ 0.084197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084198] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084200] CPU 0(2) -> Core 0
[ 0.084206] Compat vDSO mapped to ffffe000.
[ 0.084213] Checking 'hlt' instruction... OK.
[ 0.100223] ACPI: Core revision 20070126
[ 0.109784] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.109802] Booting processor 1/1 ip 4000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4825.07 BogoMIPS (lpj=9650150)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.200189] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.200199] Total of 2 processors activated (9652.83 BogoMIPS).
[ 0.200336] ENABLING IO-APIC IRQs
[ 0.200527] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.248015] Brought up 2 CPUs
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 1 2
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 2 1
[ 0.248015] net_namespace: 552 bytes
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] EISA bus registered
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: Using MMCONFIG
[ 0.248015] PCI: No mmconfig possible on device 00:18
[ 0.248015] Setting up standard PCI resources
[ 0.249890] ACPI: EC: Look up EC in DSDT
[ 0.256197] ACPI: Interpreter enabled
[ 0.256198] ACPI: (supports S0 S1 S5)
[ 0.256208] ACPI: Using IOAPIC for interrupt routing
[ 0.263378] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.263731] PCI: Transparent bridge - 0000:00:09.0
[ 0.264152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.264373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.316986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317143] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317300] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.317455] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317610] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317767] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.317923] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.318080] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318236] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.318392] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.318548] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318704] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.318859] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319024] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.319187] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.319350] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319523] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.319692] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.319861] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.320098] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.320207] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.320380] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.320553] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.320728] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.320900] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.321073] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.321245] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.321417] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.321590] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.321770] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.321951] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.322130] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.322246] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.322262] pnp: PnP ACPI init
[ 0.322268] ACPI: bus type pnp registered
[ 0.326748] pnpacpi: exceeded the max number of mem resources: 12
[ 0.326829] pnp: PnP ACPI: found 13 devices
[ 0.326831] ACPI: ACPI bus type pnp unregistered
[ 0.326834] PnPBIOS: Disabled by ACPI PNP
[ 0.326930] PCI: Using ACPI for IRQ routing
[ 0.326933] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.336022] NET: Registered protocol family 8
[ 0.336022] NET: Registered protocol family 20
[ 0.340026] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.340026] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.340026] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.340026] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.340026] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340026] system 00:02: ioport range 0x290-0x29e has been reserved
[ 0.340026] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.366552] PCI: Bridge: 0000:00:09.0
[ 0.366554] IO window: a000-afff
[ 0.366557] MEM window: 0xfde00000-0xfdefffff
[ 0.366559] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.366561] PCI: Bridge: 0000:00:0b.0
[ 0.366563] IO window: 9000-9fff
[ 0.366565] MEM window: 0xfdd00000-0xfddfffff
[ 0.366567] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[ 0.366569] PCI: Bridge: 0000:00:0c.0
[ 0.366571] IO window: 8000-8fff
[ 0.366573] MEM window: 0xfdb00000-0xfdbfffff
[ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[ 0.366577] PCI: Bridge: 0000:00:0d.0
[ 0.366579] IO window: 7000-7fff
[ 0.366580] MEM window: 0xfd900000-0xfd9fffff
[ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
[ 0.366585] PCI: Bridge: 0000:00:0e.0
[ 0.366586] IO window: 6000-6fff
[ 0.366588] MEM window: 0xfa000000-0xfcffffff
[ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.366613] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.366618] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.366651] NET: Registered protocol family 2
[ 0.368025] Time: acpi_pm clocksource has been installed.
[ 0.368041] Switched to high resolution mode on CPU 0
[ 0.136023] Switched to high resolution mode on CPU 1
[ 0.384060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384060] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384060] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.384060] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.384060] TCP reno registered
[ 0.392061] checking if image is initramfs... it is
[ 3.069526] Freeing initrd memory: 40475k freed
[ 2.850508] audit: initializing netlink socket (disabled)
[ 2.850508] type=2000 audit(1202426475.068:1): initialized
[ 2.850509] highmem bounce pool size: 64 pages
[ 2.850509] VFS: Disk quotas dquot_6.5.1
[ 2.850509] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.850509] io scheduler noop registered
[ 2.850509] io scheduler anticipatory registered
[ 2.850509] io scheduler deadline registered
[ 2.850509] io scheduler cfq registered (default)
[ 2.856244] pci 0000:00:0b.0: Linking AER extended capability
[ 2.856247] pci 0000:00:0c.0: Linking AER extended capability
[ 2.856250] pci 0000:00:0d.0: Linking AER extended capability
[ 2.856253] pci 0000:00:0e.0: Linking AER extended capability
[ 2.856259] pci 0000:05:00.0: Boot video device
[ 2.856355] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 2.856369] assign_interrupt_mode Found MSI capability
[ 2.856371] Allocate Port Service[0000:00:0b.0:pcie00]
[ 2.856408] Allocate Port Service[0000:00:0b.0:pcie03]
[ 2.856462] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 2.856475] assign_interrupt_mode Found MSI capability
[ 2.856476] Allocate Port Service[0000:00:0c.0:pcie00]
[ 2.856513] Allocate Port Service[0000:00:0c.0:pcie03]
[ 2.856565] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 2.856577] assign_interrupt_mode Found MSI capability
[ 2.856579] Allocate Port Service[0000:00:0d.0:pcie00]
[ 2.856614] Allocate Port Service[0000:00:0d.0:pcie03]
[ 2.856667] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 2.856679] assign_interrupt_mode Found MSI capability
[ 2.856681] Allocate Port Service[0000:00:0e.0:pcie00]
[ 2.856717] Allocate Port Service[0000:00:0e.0:pcie03]
[ 2.857007] isapnp: Scanning for PnP cards...
[ 3.207840] isapnp: No Plug & Play device found
[ 3.232509] Real Time Clock Driver v1.12ac
[ 3.232646] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.232762] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.233297] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.234290] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.234296] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.234298] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.234749] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.237537] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.237542] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.472226] mice: PS/2 mouse device common for all mice
[ 3.472379] EISA: Probing bus 0 at eisa.0
[ 3.472390] Cannot allocate resource for EISA slot 4
[ 3.472394] Cannot allocate resource for EISA slot 6
[ 3.472395] Cannot allocate resource for EISA slot 7
[ 3.472397] Cannot allocate resource for EISA slot 8
[ 3.472398] EISA: Detected 0 cards.
[ 3.472727] TCP cubic registered
[ 3.472739] NET: Registered protocol family 1
[ 3.472766] Starting balanced_irq
[ 3.472809] Using IPI No-Shortcut mode
[ 3.473319] Freeing unused kernel memory: 336k freed
[ 3.495269] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.649323] fuse init (API version 7.9)
[ 4.478072] ACPI: Fan [FAN] (on)
[ 4.660107] ACPI: Thermal Zone [THRM] (22 C)
[ 4.888365] SCSI subsystem initialized
[ 4.965080] usbcore: registered new interface driver usbfs
[ 4.965080] usbcore: registered new interface driver hub
[ 4.969244] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.969572] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 4.969579] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[ 4.969585] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 5.130793] libata version 3.00 loaded.
[ 5.130793] usbcore: registered new device driver usb
[ 5.139406] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.522646] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b
[ 5.522646] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 5.663118] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 5.663127] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 5.663138] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 5.663141] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 5.663331] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 5.663362] ehci_hcd 0000:00:02.1: debug port 1
[ 5.663365] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 5.663374] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 5.678754] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.678755] usb usb1: configuration #1 chosen from 1 choice
[ 5.678755] hub 1-0:1.0: USB hub found
[ 5.678755] hub 1-0:1.0: 10 ports detected
[ 5.786254] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 5.786254] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0
[ 5.786254] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 5.786254] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 5.786254] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 5.786254] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 5.786254] Probing IDE interface ide0...
[ 6.077497] hdb: Maxtor 6L250R0, ATA DISK drive
[ 6.273967] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 6.425687] hda: WDC WD2500JB-55REA0, ATA DISK drive
[ 6.425687] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.425687] hda: UDMA/100 mode selected
[ 6.425687] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.425687] hdb: UDMA/133 mode selected
[ 6.425687] Probing IDE interface ide1...
[ 6.486786] usb 1-7: configuration #1 chosen from 1 choice
[ 6.493495] usbcore: registered new interface driver libusual
[ 6.499772] Initializing USB Mass Storage driver...
[ 6.499891] scsi0 : SCSI emulation for USB Mass Storage devices
[ 6.499958] usbcore: registered new interface driver usb-storage
[ 6.499960] USB Mass Storage support registered.
[ 6.500122] usb-storage: device found at 3
[ 6.500124] usb-storage: waiting for device to settle before scanning
[ 6.729242] hdd: Maxtor 6Y120P0, ATA DISK drive
[ 7.071602] hdc: WDC WD2000BB-22GUC0, ATA DISK drive
[ 7.071624] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.072838] hdc: UDMA/100 mode selected
[ 7.074074] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.074175] hdd: UDMA/133 mode selected
[ 7.074301] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.114950] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.127133] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 7.127140] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
[ 7.127153] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 7.127155] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 7.127189] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 7.127203] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[ 7.134082] hda: max request size: 512KiB
[ 7.148947] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 7.148984] hda: cache flushes supported
[ 7.148984] hda: hda1
[ 7.160442] hdb: max request size: 512KiB
[ 7.162953] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
[ 7.165978] hdb: cache flushes supported
[ 7.165978] hdb: hdb1
[ 7.170693] hdc: max request size: 512KiB
[ 7.171913] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63
[ 7.174295] hdc: cache flushes supported
[ 7.174310] hdc: hdc1 hdc2
[ 7.200693] usb usb2: configuration #1 chosen from 1 choice
[ 7.200712] hub 2-0:1.0: USB hub found
[ 7.200721] hub 2-0:1.0: 10 ports detected
[ 7.221474] hdd: max request size: 128KiB
[ 7.221582] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63
[ 7.221697] hdd: cache flushes supported
[ 7.221697] hdd: hdd1
[ 7.322115] sata_nv 0000:00:07.0: version 3.5
[ 7.322503] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 7.322510] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 7.322514] sata_nv 0000:00:07.0: Using ADMA mode
[ 7.322557] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 7.322811] scsi1 : sata_nv
[ 7.322811] scsi2 : sata_nv
[ 7.322811] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 7.322811] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 7.455185] kjournald starting. Commit interval 5 seconds
[ 7.499053] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.666331] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 7.875127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.811068] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
[ 7.811068] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.911241] ata1.00: configured for UDMA/133
[ 7.938562] usb 2-3: configuration #1 chosen from 1 choice
[ 7.943472] scsi3 : SCSI emulation for USB Mass Storage devices
[ 7.856489] usb-storage: device found at 2
[ 7.856489] usb-storage: waiting for device to settle before scanning
[ 8.342614] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.536092] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133
[ 8.536092] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.614840] ata2.00: configured for UDMA/133
[ 8.614840] scsi 1:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 8.614840] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.614840] scsi 2:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
[ 8.614840] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.614840] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 8.614840] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 8.614840] sata_nv 0000:00:08.0: Using ADMA mode
[ 8.614840] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 8.614840] scsi4 : sata_nv
[ 8.614840] scsi5 : sata_nv
[ 8.614840] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 8.614840] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 8.819670] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.330169] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.387030] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 9.387032] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.702811] ata4.00: configured for UDMA/133
[ 9.702811] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 9.702811] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 12.590834] usb-storage: device scan complete
[ 11.914367] scsi 0:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0
[ 13.311942] usb-storage: device scan complete
[ 13.996284] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 14.002331] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 14.009321] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 14.016300] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 14.773562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.887586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.123764] NET: Registered protocol family 10
[ 15.124098] lo: Disabled Privacy Extensions
[ 15.397975] input: Power Button (FF) as /class/input/input1
[ 15.432026] ACPI: Power Button (FF) [PWRF]
[ 15.432073] input: Power Button (CM) as /class/input/input2
[ 15.482981] ACPI: Power Button (CM) [PWRB]
[ 15.513125] input: PC Speaker as /class/input/input3
[ 15.987721] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 15.987721] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 15.470855] Driver 'sd' needs updating - please use bus_type methods
[ 15.471506] sd 1:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 15.471527] sd 1:0:0:0: [sda] Write Protect is off
[ 15.471530] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.471563] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 15.471656] sd 1:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 15.471673] sd 1:0:0:0: [sda] Write Protect is off
[ 15.471675] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.471706] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 15.471709] sda: sda1
[ 16.224423] sd 1:0:0:0: [sda] Attached SCSI disk
[ 16.224506] sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 16.224525] sd 2:0:0:0: [sdb] Write Protect is off
[ 16.224528] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.224560] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.224599] sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 16.224599] sd 2:0:0:0: [sdb] Write Protect is off
[ 16.224599] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.224599] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.224599] sdb:<4>Driver 'sr' needs updating - please use bus_type methods
[ 16.246139] sdb1 sdb2
[ 16.246139] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 16.261240] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 16.261262] sd 5:0:0:0: [sdc] Write Protect is off
[ 16.261265] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 16.261297] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.261381] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 16.261399] sd 5:0:0:0: [sdc] Write Protect is off
[ 16.261400] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 16.261432] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.261434] sdc: sdc1
[ 15.555810] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 15.572777] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 15.582914] sd 3:0:0:1: [sde] Attached SCSI removable disk
[ 15.594896] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 15.594900] Uniform CD-ROM driver Revision: 3.20
[ 15.594960] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 15.596922] sd 3:0:0:2: [sdf] Attached SCSI removable disk
[ 15.612209] sd 3:0:0:3: [sdg] Attached SCSI removable disk
[ 15.634329] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 16.367625] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 16.367649] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 16.367669] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 16.367687] sr 0:0:0:0: Attached scsi generic sg3 type 5
[ 16.367706] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 16.367725] sd 3:0:0:1: Attached scsi generic sg5 type 0
[ 16.367740] sd 3:0:0:2: Attached scsi generic sg6 type 0
[ 16.367756] sd 3:0:0:3: Attached scsi generic sg7 type 0
[ 16.382067] parport_pc 00:08: reported by Plug and Play ACPI
[ 16.382067] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 16.792680] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 16.792687] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 16.792715] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.170115] intel8x0_measure_ac97_clock: measured 54728 usecs
[ 17.170118] intel8x0: clocking to 46910
[ 17.562015] lp0: using parport0 (interrupt-driven).
[ 17.652466] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k
[ 17.994151] EXT3 FS on hda1, internal journal
[ 28.007906] eth1: no IPv6 routers present
[ 205.567025] kjournald starting. Commit interval 5 seconds
[ 205.572753] EXT3 FS on hdb1, internal journal
[ 205.572757] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.663332] kjournald starting. Commit interval 5 seconds
[ 205.670365] EXT3 FS on hdc1, internal journal
[ 205.670368] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.696712] kjournald starting. Commit interval 5 seconds
[ 205.704833] EXT3 FS on hdd1, internal journal
[ 205.704833] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.742061] kjournald starting. Commit interval 5 seconds
[ 205.755366] EXT3 FS on sda1, internal journal
[ 205.755369] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.799409] kjournald starting. Commit interval 5 seconds
[ 205.806302] EXT3 FS on sdb1, internal journal
[ 205.806305] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.852981] kjournald starting. Commit interval 5 seconds
[ 205.859914] EXT3 FS on sdb2, internal journal
[ 205.859917] EXT3-fs: mounted filesystem with ordered data mode.
[ 205.902852] kjournald starting. Commit interval 5 seconds
[ 205.910977] EXT3 FS on sdc1, internal journal
[ 205.910977] EXT3-fs: mounted filesystem with ordered data mode.
[ 207.353851] No dock devices found.
[ 207.383652] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 190.611292] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 207.792123] powernow-k8: MP systems not supported by PSB BIOS structure
[ 190.611536] powernow-k8: MP systems not supported by PSB BIOS structure
[ 211.617930] ppdev: user-space parallel port driver
[ 213.750362] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 213.750369] apm: disabled - APM is not SMP safe.
[ 211.009415] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
On Thu, 7 Feb 2008, Thomas Gleixner wrote:
> > I hope that, from at least my perspective, your question is rhetorical.
> Yeah. The non rhetorical one was directed to Jiri. :)
Actually, I have no idea :) I am right now confused too, I am quite
surprised that 'nohpet' fixes the problem for you, Chris, even though your
system doesn't have HPET at all :)
Could you please double-check that 'nohpet' really reliably fixes the
issue?
I suggested using nohpet as I have already seen reports about such kinds
of problems on machines that had hpet, but this one seems to be more
confusing :)
Also, output of the kernel with the patch Thomas provided would be
interesting.
Thanks,
--
Jiri Kosina
SUSE Labs
On Fri, 8 Feb 2008, Jiri Kosina wrote:
> > > I hope that, from at least my perspective, your question is
> > > rhetorical.
> > Yeah. The non rhetorical one was directed to Jiri. :)
> Actually, I have no idea :) I am right now confused too, I am quite
> surprised that 'nohpet' fixes the problem for you, Chris, even though your
> system doesn't have HPET at all :)
> Could you please double-check that 'nohpet' really reliably fixes the
> issue?
> I suggested using nohpet as I have already seen reports about such kinds
> of problems on machines that had hpet, but this one seems to be more
> confusing :)
> Also, output of the kernel with the patch Thomas provided would be
> interesting.
And of course I forgot to mention -- if this started happening only
recently, and wasn't hapenning with older kernels, doing git-bisect might
help here (assuming that are able to see whether the problem is present or
not) to find the exact commit that causes the behavior you are seeing.
--
Jiri Kosina
SUSE Labs
On Thu, 7 Feb 2008, Chris Holvenstot wrote:
> I believe that the following is the output you are looking for - sorry
> for the delay - between doctors and grandkids I was ready for a few pain
> pills and a long nap.
Hope you feel better again !
> I suspect you often feel the same way after dealing with some who post
> here.
:)
> [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet
....
> [ 0.004000] HPET not available
Which is expected, as we have "nohpet" on the kernel command line.
Can you provide the output without the "nohpet" on the kernel command
line please ?
Thanks,
tglx
Thomas -
Attached is the output I believe you requested (standard boot - ommiting
the NOHPET directive)
Unless you want to try something else i will run in this configuration
today to try and verify that the problem is still with us.
Thanks for th good wishes - it is going to be a while - I had an open
heart procedure about two weeks ago and they are not subtle when they
split your chest open.
This is why I said that I would be more than happy to do the bisect
thing if it comes to that - since I can't go out and chase the ladies I
might as well do something useful.
However, as previously stated I would need a little instruction on how
to accoomplish this.
Chris
By the way - the big gap in timestamps in the dmesg output is because
several "routine" fsck operations were performed during this boot cycle.
[ 0.000000] Linux version 2.6.24-git15-ch2 (root@popeye) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #3 SMP PREEMPT Thu
Feb 7 22:00:10 CST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [c00f5380] 000f5380
[ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524272
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524272
[ 0.000000] On node 0 totalpages: 524272
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292593 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF0000, 0040
[ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177
[ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2412.382 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61568k reserved, 952k data, 336k init, 1179584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB)
[ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] HPET not available
[ 0.084006] Calibrating delay using timer specific routine.. 4827.74 BogoMIPS (lpj=9655497)
[ 0.084047] Security Framework initialized
[ 0.084054] SELinux: Disabled at boot.
[ 0.084069] Mount-cache hash table entries: 512
[ 0.084197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084198] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084200] CPU 0(2) -> Core 0
[ 0.084206] Compat vDSO mapped to ffffe000.
[ 0.084213] Checking 'hlt' instruction... OK.
[ 0.100223] ACPI: Core revision 20070126
[ 0.109782] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.109800] Booting processor 1/1 ip 4000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4825.07 BogoMIPS (lpj=9650141)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.200189] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01
[ 0.200199] Total of 2 processors activated (9652.81 BogoMIPS).
[ 0.200337] ENABLING IO-APIC IRQs
[ 0.200528] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.248015] Brought up 2 CPUs
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 1 2
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 3
[ 0.248015] groups: 2 1
[ 0.248015] net_namespace: 552 bytes
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] EISA bus registered
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: Using MMCONFIG
[ 0.248015] PCI: No mmconfig possible on device 00:18
[ 0.248015] Setting up standard PCI resources
[ 0.249887] ACPI: EC: Look up EC in DSDT
[ 0.256197] ACPI: Interpreter enabled
[ 0.256198] ACPI: (supports S0 S1 S5)
[ 0.256208] ACPI: Using IOAPIC for interrupt routing
[ 0.263376] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.263729] PCI: Transparent bridge - 0000:00:09.0
[ 0.264150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.264371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.316996] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317153] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317310] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.317465] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317621] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.317777] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.317934] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.318090] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318246] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.318402] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.318558] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.318714] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.318869] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319034] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.319197] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.319360] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.319533] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.319702] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.319871] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.320109] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.320219] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 0.320392] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.320566] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.320740] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.320913] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.321085] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
[ 0.321257] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.321430] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.321602] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.321783] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.321963] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.322144] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.322259] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.322275] pnp: PnP ACPI init
[ 0.322281] ACPI: bus type pnp registered
[ 0.326763] pnpacpi: exceeded the max number of mem resources: 12
[ 0.326845] pnp: PnP ACPI: found 13 devices
[ 0.326846] ACPI: ACPI bus type pnp unregistered
[ 0.326849] PnPBIOS: Disabled by ACPI PNP
[ 0.326945] PCI: Using ACPI for IRQ routing
[ 0.326948] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.336022] NET: Registered protocol family 8
[ 0.336022] NET: Registered protocol family 20
[ 0.340026] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.340026] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.340026] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.340026] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.340026] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.340026] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340026] system 00:02: ioport range 0x290-0x29e has been reserved
[ 0.340026] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.340026] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.366554] PCI: Bridge: 0000:00:09.0
[ 0.366556] IO window: a000-afff
[ 0.366559] MEM window: 0xfde00000-0xfdefffff
[ 0.366561] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.366563] PCI: Bridge: 0000:00:0b.0
[ 0.366565] IO window: 9000-9fff
[ 0.366567] MEM window: 0xfdd00000-0xfddfffff
[ 0.366569] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[ 0.366571] PCI: Bridge: 0000:00:0c.0
[ 0.366573] IO window: 8000-8fff
[ 0.366575] MEM window: 0xfdb00000-0xfdbfffff
[ 0.366577] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[ 0.366579] PCI: Bridge: 0000:00:0d.0
[ 0.366581] IO window: 7000-7fff
[ 0.366583] MEM window: 0xfd900000-0xfd9fffff
[ 0.366585] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
[ 0.366587] PCI: Bridge: 0000:00:0e.0
[ 0.366589] IO window: 6000-6fff
[ 0.366591] MEM window: 0xfa000000-0xfcffffff
[ 0.366592] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.366599] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.366606] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.366611] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.366616] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.366620] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.366653] NET: Registered protocol family 2
[ 0.368027] Time: acpi_pm clocksource has been installed.
[ 0.368040] Switched to high resolution mode on CPU 0
[ 0.136022] Switched to high resolution mode on CPU 1
[ 0.384058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.384058] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.384058] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.384058] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.384058] TCP reno registered
[ 0.392059] checking if image is initramfs... it is
[ 3.069519] Freeing initrd memory: 40475k freed
[ 2.850497] audit: initializing netlink socket (disabled)
[ 2.850497] type=2000 audit(1202530678.068:1): initialized
[ 2.850497] highmem bounce pool size: 64 pages
[ 2.850497] VFS: Disk quotas dquot_6.5.1
[ 2.850497] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.850497] io scheduler noop registered
[ 2.850497] io scheduler anticipatory registered
[ 2.850497] io scheduler deadline registered
[ 2.850497] io scheduler cfq registered (default)
[ 2.856227] pci 0000:00:0b.0: Linking AER extended capability
[ 2.856231] pci 0000:00:0c.0: Linking AER extended capability
[ 2.856234] pci 0000:00:0d.0: Linking AER extended capability
[ 2.856237] pci 0000:00:0e.0: Linking AER extended capability
[ 2.856243] pci 0000:05:00.0: Boot video device
[ 2.856338] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 2.856352] assign_interrupt_mode Found MSI capability
[ 2.856354] Allocate Port Service[0000:00:0b.0:pcie00]
[ 2.856391] Allocate Port Service[0000:00:0b.0:pcie03]
[ 2.856445] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 2.856458] assign_interrupt_mode Found MSI capability
[ 2.856460] Allocate Port Service[0000:00:0c.0:pcie00]
[ 2.856496] Allocate Port Service[0000:00:0c.0:pcie03]
[ 2.856548] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 2.856560] assign_interrupt_mode Found MSI capability
[ 2.856562] Allocate Port Service[0000:00:0d.0:pcie00]
[ 2.856597] Allocate Port Service[0000:00:0d.0:pcie03]
[ 2.856650] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 2.856662] assign_interrupt_mode Found MSI capability
[ 2.856664] Allocate Port Service[0000:00:0e.0:pcie00]
[ 2.856701] Allocate Port Service[0000:00:0e.0:pcie03]
[ 2.856990] isapnp: Scanning for PnP cards...
[ 3.207827] isapnp: No Plug & Play device found
[ 3.232228] Real Time Clock Driver v1.12ac
[ 3.232351] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 3.232462] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.232954] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.233786] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 3.233792] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.233795] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.234038] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.236963] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.236969] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.471677] mice: PS/2 mouse device common for all mice
[ 3.471831] EISA: Probing bus 0 at eisa.0
[ 3.471842] Cannot allocate resource for EISA slot 4
[ 3.471846] Cannot allocate resource for EISA slot 6
[ 3.471848] Cannot allocate resource for EISA slot 7
[ 3.471849] Cannot allocate resource for EISA slot 8
[ 3.471851] EISA: Detected 0 cards.
[ 3.472227] TCP cubic registered
[ 3.472239] NET: Registered protocol family 1
[ 3.472266] Starting balanced_irq
[ 3.472303] Using IPI No-Shortcut mode
[ 3.472807] Freeing unused kernel memory: 336k freed
[ 3.262972] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.417268] fuse init (API version 7.9)
[ 4.687665] ACPI: Fan [FAN] (on)
[ 4.428053] ACPI: Thermal Zone [THRM] (22 C)
[ 5.091228] usbcore: registered new interface driver usbfs
[ 5.091257] usbcore: registered new interface driver hub
[ 5.113830] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.114158] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 5.114166] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[ 5.114171] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 5.151814] usbcore: registered new device driver usb
[ 5.172076] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.647091] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b
[ 5.647091] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 5.651521] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 5.651525] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0
[ 5.651546] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 5.651550] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
[ 5.651557] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 5.651564] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 5.651575] Probing IDE interface ide0...
[ 5.401102] SCSI subsystem initialized
[ 5.408093] libata version 3.00 loaded.
[ 5.947946] hdb: Maxtor 6L250R0, ATA DISK drive
[ 6.292902] hda: WDC WD2500JB-55REA0, ATA DISK drive
[ 6.292902] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.292902] hda: UDMA/100 mode selected
[ 6.292902] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.292902] hdb: UDMA/133 mode selected
[ 6.292902] Probing IDE interface ide1...
[ 6.589402] hdd: Maxtor 6Y120P0, ATA DISK drive
[ 6.936725] hdc: WDC WD2000BB-22GUC0, ATA DISK drive
[ 6.936725] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.936725] hdc: UDMA/100 mode selected
[ 6.936725] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 6.936725] hdd: UDMA/133 mode selected
[ 6.936725] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.977117] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.753336] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 6.753336] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
[ 6.753336] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 6.753336] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.753336] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 6.753336] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[ 6.814274] usb usb1: configuration #1 chosen from 1 choice
[ 6.814274] hub 1-0:1.0: USB hub found
[ 6.814274] hub 1-0:1.0: 10 ports detected
[ 6.921411] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 6.921411] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
[ 6.921411] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 6.921411] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.921411] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 6.921411] ehci_hcd 0000:00:02.1: debug port 1
[ 6.921411] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 6.921411] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 6.931202] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.931312] usb usb2: configuration #1 chosen from 1 choice
[ 6.931330] hub 2-0:1.0: USB hub found
[ 6.931339] hub 2-0:1.0: 10 ports detected
[ 7.043362] sata_nv 0000:00:07.0: version 3.5
[ 7.043764] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 7.043772] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 7.043776] sata_nv 0000:00:07.0: Using ADMA mode
[ 7.043821] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 7.047950] scsi0 : sata_nv
[ 7.295406] hda: max request size: 512KiB
[ 7.050157] scsi1 : sata_nv
[ 7.050345] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20
[ 7.050347] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20
[ 7.300924] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 7.300999] hda: cache flushes supported
[ 7.301050] hda: hda1
[ 7.313419] hdb: max request size: 512KiB
[ 7.314751] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63
[ 7.317069] hdb: cache flushes supported
[ 7.317101] hdb: hdb1
[ 7.319268] hdc: max request size: 512KiB
[ 7.320362] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63
[ 7.323026] hdc: cache flushes supported
[ 7.323041] hdc: hdc1 hdc2
[ 7.371028] hdd: max request size: 128KiB
[ 7.371028] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63
[ 7.371028] hdd: cache flushes supported
[ 7.371028] hdd: hdd1
[ 7.393750] kjournald starting. Commit interval 5 seconds
[ 7.659088] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.571281] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.580189] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133
[ 7.580189] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.879448] ata1.00: configured for UDMA/133
[ 8.068995] usb 2-7: new high speed USB device using ehci_hcd and address 3
[ 8.309918] usb 2-7: configuration #1 chosen from 1 choice
[ 8.452153] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.505964] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133
[ 8.505967] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 8.581196] ata2.00: configured for UDMA/133
[ 8.210002] scsi 0:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5
[ 8.210002] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.210002] scsi 1:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5
[ 8.210002] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 8.210002] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 8.210002] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 8.210002] sata_nv 0000:00:08.0: Using ADMA mode
[ 8.210002] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 8.210023] scsi2 : sata_nv
[ 8.210034] scsi3 : sata_nv
[ 8.210148] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23
[ 8.210150] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23
[ 8.653698] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 8.914784] usb 1-3: configuration #1 chosen from 1 choice
[ 8.547093] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.041458] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.093418] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 9.093418] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 9.661502] ata4.00: configured for UDMA/133
[ 9.163074] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 9.163074] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 13.810920] input: Power Button (FF) as /class/input/input1
[ 13.855154] ACPI: Power Button (FF) [PWRF]
[ 13.855216] input: Power Button (CM) as /class/input/input2
[ 13.915125] ACPI: Power Button (CM) [PWRB]
[ 15.229172] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 15.229191] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 15.623143] NET: Registered protocol family 10
[ 15.623524] lo: Disabled Privacy Extensions
[ 15.879878] input: PC Speaker as /class/input/input3
[ 15.900353] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.926744] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.612198] Driver 'sd' needs updating - please use bus_type methods
[ 16.612313] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 16.612332] sd 0:0:0:0: [sda] Write Protect is off
[ 16.612334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.612363] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 16.612431] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[ 16.612445] sd 0:0:0:0: [sda] Write Protect is off
[ 16.612447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.612471] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 16.612475] sda: sda1
[ 16.633367] sd 0:0:0:0: [sda] Attached SCSI disk
[ 16.633431] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 16.633444] sd 1:0:0:0: [sdb] Write Protect is off
[ 16.633446] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.633465] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.633510] sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
[ 16.633520] sd 1:0:0:0: [sdb] Write Protect is off
[ 16.633522] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 16.633540] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.633542] sdb:<6>usbcore: registered new interface driver libusual
[ 16.654849] sdb1 sdb2
[ 16.654939] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 16.655114] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 16.655134] sd 3:0:0:0: [sdc] Write Protect is off
[ 16.655136] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 16.655168] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.655229] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 16.655248] sd 3:0:0:0: [sdc] Write Protect is off
[ 16.655250] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 16.655281] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.655283] sdc: sdc1
[ 16.681568] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 16.779430] Initializing USB Mass Storage driver...
[ 16.784045] scsi4 : SCSI emulation for USB Mass Storage devices
[ 16.784221] usb-storage: device found at 3
[ 16.784222] usb-storage: waiting for device to settle before scanning
[ 16.784271] scsi5 : SCSI emulation for USB Mass Storage devices
[ 16.784368] usbcore: registered new interface driver usb-storage
[ 16.784370] USB Mass Storage support registered.
[ 16.784388] usb-storage: device found at 2
[ 16.784389] usb-storage: waiting for device to settle before scanning
[ 16.818077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.818100] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 16.818118] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 16.925921] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 16.962325] parport_pc 00:08: reported by Plug and Play ACPI
[ 16.962338] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.117006] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 17.117011] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 17.117033] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.498435] intel8x0_measure_ac97_clock: measured 54724 usecs
[ 17.498435] intel8x0: clocking to 46906
[ 17.744708] lp0: using parport0 (interrupt-driven).
[ 17.828840] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k
[ 18.178849] EXT3 FS on hda1, internal journal
[ 22.416116] usb-storage: device scan complete
[ 22.418112] scsi 4:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0
[ 22.418429] scsi 4:0:0:0: Attached scsi generic sg3 type 5
[ 22.419350] usb-storage: device scan complete
[ 20.715144] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 20.722136] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 20.730719] scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 20.740507] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 20.749834] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 20.749872] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 20.760475] sd 5:0:0:1: [sde] Attached SCSI removable disk
[ 20.760512] sd 5:0:0:1: Attached scsi generic sg5 type 0
[ 20.771477] sd 5:0:0:2: [sdf] Attached SCSI removable disk
[ 20.771517] sd 5:0:0:2: Attached scsi generic sg6 type 0
[ 20.782456] sd 5:0:0:3: [sdg] Attached SCSI removable disk
[ 20.782487] sd 5:0:0:3: Attached scsi generic sg7 type 0
[ 22.575143] Driver 'sr' needs updating - please use bus_type methods
[ 22.603314] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 22.603319] Uniform CD-ROM driver Revision: 3.20
[ 22.603390] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 27.297276] eth1: no IPv6 routers present
[ 501.352293] kjournald starting. Commit interval 5 seconds
[ 501.361158] EXT3 FS on hdb1, internal journal
[ 501.361158] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.424539] kjournald starting. Commit interval 5 seconds
[ 501.430189] EXT3 FS on hdc1, internal journal
[ 501.430192] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.454377] kjournald starting. Commit interval 5 seconds
[ 501.464902] EXT3 FS on hdd1, internal journal
[ 501.464902] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.481409] kjournald starting. Commit interval 5 seconds
[ 494.053258] EXT3 FS on sda1, internal journal
[ 494.053258] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.536644] kjournald starting. Commit interval 5 seconds
[ 494.095922] EXT3 FS on sdb1, internal journal
[ 494.095922] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.585943] kjournald starting. Commit interval 5 seconds
[ 494.142663] EXT3 FS on sdb2, internal journal
[ 494.142663] EXT3-fs: mounted filesystem with ordered data mode.
[ 501.636607] kjournald starting. Commit interval 5 seconds
[ 501.646948] EXT3 FS on sdc1, internal journal
[ 501.646948] EXT3-fs: mounted filesystem with ordered data mode.
[ 503.240222] No dock devices found.
[ 503.269482] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 495.995849] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 503.681952] powernow-k8: MP systems not supported by PSB BIOS structure
[ 495.995863] powernow-k8: MP systems not supported by PSB BIOS structure
[ 499.375089] ppdev: user-space parallel port driver
[ 501.143613] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 501.143620] apm: disabled - APM is not SMP safe.
[ 527.097926] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 527.097934] vboxdrv: Successfully done.
[ 515.705964] vboxdrv: Successfully loaded version 1.5.4 (interface 0x00050002).
[ 527.784486] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
On Sat, 9 Feb 2008, Chris Holvenstot wrote:
> Thomas -
>
> Attached is the output I believe you requested (standard boot - ommiting
> the NOHPET directive)
>
> Unless you want to try something else i will run in this configuration
> today to try and verify that the problem is still with us.
>
> Thanks for th good wishes - it is going to be a while - I had an open
> heart procedure about two weeks ago and they are not subtle when they
> split your chest open.
>
> This is why I said that I would be more than happy to do the bisect
> thing if it comes to that - since I can't go out and chase the ladies I
> might as well do something useful.
That'd be cool.
> However, as previously stated I would need a little instruction on how
> to accoomplish this.
Linus gave instructions here:
http://marc.info/?l=linux-kernel&m=118408208816556&w=2
If you have further questions, I'm happy to help.
> [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
....
> [ 0.004000] HPET not available
Ok. That confirms, that we never even try to touch hpet at all. So the
mystery why "nohpet" on the kernel command line makes your problem go
away is yet more mysterious.
Thanks,
tglx
Chris,
On Sat, 9 Feb 2008, Thomas Gleixner wrote:
> On Sat, 9 Feb 2008, Chris Holvenstot wrote:
> > [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
> ....
> > [ 0.004000] HPET not available
>
> Ok. That confirms, that we never even try to touch hpet at all. So the
> mystery why "nohpet" on the kernel command line makes your problem go
> away is yet more mysterious.
Have we any update on this ? Does the problem persist with 2.6.25-rc7 ?
Thanks,
tglx
Thomas -
I have not see the problem with "repeating keys" for a while now - since
it was a "soft" failure I can not specify exactly which build was the
last I saw it on.
I am currently running 2.6.25-rc7-git2
If you have questions abount the configuration of my kernel my config
file is attached.
Thank you for your efforts on this issue.
Chris
On Fri, 2008-03-28 at 11:15 +0100, Thomas Gleixner wrote:
> Chris,
>
> On Sat, 9 Feb 2008, Thomas Gleixner wrote:
> > On Sat, 9 Feb 2008, Chris Holvenstot wrote:
> > > [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash
> > ....
> > > [ 0.004000] HPET not available
> >
> > Ok. That confirms, that we never even try to touch hpet at all. So the
> > mystery why "nohpet" on the kernel command line makes your problem go
> > away is yet more mysterious.
>
> Have we any update on this ? Does the problem persist with 2.6.25-rc7 ?
>
> Thanks,
>
> tglx
On Fri, 28 Mar 2008, Chris Holvenstot wrote:
> I have not see the problem with "repeating keys" for a while now - since
> it was a "soft" failure I can not specify exactly which build was the
> last I saw it on.
> I am currently running 2.6.25-rc7-git2
> If you have questions abount the configuration of my kernel my config
> file is attached.
Hi,
I think that this was one of the issues that were caused by
CONFIG_GROUP_SCHED, which were fixed a few weeks ago.
Still, the real issue is in Xorg, that their autorepeat code is very
unhappy when X process doesn't get scheduled often enough.
Thanks,
--
Jiri Kosina
SUSE Labs
Juri -
I think that you are correct - and have one - small - piece of subtle
evidence to support that position.
While it has been a while since I have seen the repeating key issue,
from time to time I have noted that there is a lag of a few seconds
between the keyboard and the screen.
There is no way an old man lke myself is out-typeing his hardware. This
is on a lightly loaded, dual core system with a few gig of memory.
Thanks
Chris
On Fri, 2008-03-28 at 12:24 +0100, Jiri Kosina wrote:
> On Fri, 28 Mar 2008, Chris Holvenstot wrote:
>
> > I have not see the problem with "repeating keys" for a while now - since
> > it was a "soft" failure I can not specify exactly which build was the
> > last I saw it on.
> > I am currently running 2.6.25-rc7-git2
> > If you have questions abount the configuration of my kernel my config
> > file is attached.
>
> Hi,
>
> I think that this was one of the issues that were caused by
> CONFIG_GROUP_SCHED, which were fixed a few weeks ago.
>
> Still, the real issue is in Xorg, that their autorepeat code is very
> unhappy when X process doesn't get scheduled often enough.
>
> Thanks,
>