1. check for errors returned from clk_get()
2. fix "Unbalanced enable for IRQ 160"
3. fix transmit descriptor handling in panning
4. clean frame buffer on blank - useful for OLED displays
5. formatting clean up
Signed-off-by: Guennadi Liakhovetski <[email protected]>
---
Andrew, please, re-apply. This is the same version as originally has been
sent, it had correct indentation, so, I didn't have to redo it. Only had
to update after the clkdev patch from Sascha.
drivers/video/mx3fb.c | 56 +++++++++++++++++++++++++++---------------------
1 files changed, 31 insertions(+), 25 deletions(-)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 3e84635..02014d2 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -400,12 +400,12 @@ static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
int16_t x_pos, int16_t y_pos)
{
- x_pos += mx3fb->h_start_width;
- y_pos += mx3fb->v_start_width;
-
if (channel != IDMAC_SDC_0)
return -EINVAL;
+ x_pos += mx3fb->h_start_width;
+ y_pos += mx3fb->v_start_width;
+
mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
return 0;
}
@@ -491,11 +491,13 @@ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
* 2^4 to get fractional part, as long as we stay under ~250MHz and on
* i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
*/
- dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
-
ipu_clk = clk_get(mx3fb->dev, NULL);
- div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
- clk_put(ipu_clk);
+ if (!IS_ERR(ipu_clk)) {
+ div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+ clk_put(ipu_clk);
+ } else {
+ div = 0;
+ }
if (div < 0x40) { /* Divider less than 4 */
dev_dbg(mx3fb->dev,
@@ -503,6 +505,9 @@ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
div = 0x40;
}
+ dev_dbg(mx3fb->dev, "pixel clk = %u, divider %u.%u\n",
+ pixel_clk, div >> 4, (div & 7) * 125);
+
spin_lock_irqsave(&mx3fb->lock, lock_flags);
/*
@@ -515,16 +520,16 @@ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
/* DI settings */
old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
- sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
- sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+ sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+ sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
- sig.clk_pol << DI_D3_CLK_POL_SHIFT |
- sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
- sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
- sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+ sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+ sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+ sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+ sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
switch (pixel_fmt) {
@@ -721,7 +726,6 @@ static int mx3fb_set_par(struct fb_info *fbi)
struct idmac_channel *ichan = mx3_fbi->idmac_channel;
struct idmac_video_param *video = &ichan->params.video;
struct scatterlist *sg = mx3_fbi->sg;
- size_t screen_size;
dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
@@ -745,12 +749,10 @@ static int mx3fb_set_par(struct fb_info *fbi)
}
}
- screen_size = fbi->fix.line_length * fbi->var.yres;
-
sg_init_table(&sg[0], 1);
sg_init_table(&sg[1], 1);
- sg_dma_address(&sg[0]) = fbi->fix.smem_start;
+ sg_dma_address(&sg[0]) = fbi->fix.smem_start;
sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
fbi->fix.smem_len,
offset_in_page(fbi->screen_base));
@@ -927,7 +929,7 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
u32 val;
int ret = 1;
- dev_dbg(fbi->device, "%s\n", __func__);
+ dev_dbg(fbi->device, "%s, regno = %u\n", __func__, regno);
mutex_lock(&mx3_fbi->mutex);
/*
@@ -973,9 +975,8 @@ static int mx3fb_blank(int blank, struct fb_info *fbi)
struct mx3fb_info *mx3_fbi = fbi->par;
struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- dev_dbg(fbi->device, "%s\n", __func__);
-
- dev_dbg(fbi->device, "blank = %d\n", blank);
+ dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
+ blank, fbi->screen_base, fbi->fix.smem_len);
if (mx3_fbi->blank == blank)
return 0;
@@ -988,8 +989,11 @@ static int mx3fb_blank(int blank, struct fb_info *fbi)
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_NORMAL:
- sdc_disable_channel(mx3_fbi);
sdc_set_brightness(mx3fb, 0);
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+ /* Give LCD time to update - enough for 50 and 60 Hz */
+ msleep(25);
+ sdc_disable_channel(mx3_fbi);
break;
case FB_BLANK_UNBLANK:
sdc_enable_channel(mx3_fbi);
@@ -1063,6 +1067,7 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
mutex_unlock(&mx3_fbi->mutex);
dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
"user interrupt" : "timeout");
+ disable_irq(mx3_fbi->idmac_channel->eof_irq);
return ret ? : -ETIMEDOUT;
}
@@ -1073,6 +1078,9 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
offset_in_page(fbi->screen_base + offset));
+ if (mx3_fbi->txd)
+ async_tx_ack(mx3_fbi->txd);
+
txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
if (!txd) {
@@ -1099,8 +1107,6 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
return -EIO;
}
- if (mx3_fbi->txd)
- async_tx_ack(mx3_fbi->txd);
mx3_fbi->txd = txd;
fbi->var.xoffset = var->xoffset;
@@ -1506,7 +1512,7 @@ static struct platform_driver mx3fb_driver = {
* example:
* video=mx3fb:bpp=16
*/
-static int mx3fb_setup(void)
+static int __init mx3fb_setup(void)
{
#ifndef MODULE
char *opt, *options = NULL;
--
1.5.4