3 days ago I noticed the following:
May 22 00:29:25 pervalidus kernel: eth0: Too much work at interrupt, IntrStatus=0x0001.
May 22 00:30:00 pervalidus last message repeated 17 times
May 22 00:30:13 pervalidus last message repeated 5 times
May 22 00:30:24 pervalidus kernel: eth0: Too much work at interrupt, IntrStatus=0x0001.
May 22 00:30:33 pervalidus last message repeated 2 times
May 22 00:30:34 pervalidus last message repeated 2 times
May 22 00:35:21 pervalidus kernel: EXT3-fs error (device ide0(3,7)): ext3_new_b lock: Allocating block in system zone - block = 1573066
May 22 00:38:51 pervalidus kernel: EXT3-fs error (device ide0(3,7)): ext3_new_inode: reserved inode or inode > inodes count - block_group = 0,inode=1
May 22 00:38:51 pervalidus kernel: EXT3-fs error (device ide0(3,7)) in ext3_new_inode: IO failure
I was disconnected from the Internet and most commands stopped
working with "Cannot execute binary file.".
>From /var/log/syslog:
May 22 00:30:39 pervalidus modprobe: modprobe: Can't locate module binfmt-0804
May 22 00:31:14 pervalidus last message repeated 26 times
May 22 00:32:19 pervalidus last message repeated 52 times
May 22 00:33:24 pervalidus last message repeated 52 times
May 22 00:34:25 pervalidus last message repeated 52 times
May 22 00:35:30 pervalidus last message repeated 52 times
May 22 00:36:35 pervalidus last message repeated 52 times
May 22 00:37:40 pervalidus last message repeated 52 times
May 22 00:38:41 pervalidus last message repeated 54 times
May 22 00:39:46 pervalidus last message repeated 54 times
May 22 00:40:51 pervalidus last message repeated 54 times
May 22 00:42:24 pervalidus last message repeated 8 times
On reboot:
May 22 01:01:52 pervalidus kernel: EXT3-fs error (device ide0(3,7)): ext3_new_inode: reserved inode or inode > inodes count - block_group = 0,inode=2
May 22 01:01:52 pervalidus kernel: EXT3-fs error (device ide0(3,7)) in ext3_new_inode: IO failure
I manually ran fsck and it "fixed" (there were some messages
about duplicate/bad blocks) everything, leaving 3 files I
recovered in /lost+found, but this undeletable:
br-s--xr-x 1 28260 28532 0, 0 Sep 22 2014 #1570049
#1570049: setuid block special (0/0)
smartmontools doesn't report any errors besides the high
Hardware_ECC_Recovered, which increased after I ran all
read-only Maxtor's Powermax tests (from 3 to almost 5 million),
but the latter didn't find anything wrong either.
Should I replace it ? There was also a crash today on Windows,
and after using reset the hard drive restarted
(Start_Stop_Count increased by 1), what it only does when you
power on or use sleep / wake up.
--
0@pervalidus.{tk, dyndns.org}