2005-09-25 18:24:44

by David Ronis

[permalink] [raw]
Subject: problem with 2.6.13.[0-2]


I recently tried upgrading from 2.6.12.6 to 2.6.13.[0-2] on an HP
pavilion zv5000 (a P4 with hyper-threading) running slackware-current.
The configuration and build went fine and the new kernel boots;
however, things run very very slowly. As far as I can tell, what is
slow are process involving any disk IO. For example, the part of the
boot where ldconfig is run seems to take 2-3 times as long as do
things like remaking the X font caches, loading programs etc.

This vaguely reminds me of my initial experience with this laptop,
where I hadn't turned on CONFIG_BLK_DEV_ATIIXP, although it is now
(see below). If I reboot with the old kernel, things run as before.

Finally, I don't subscribe to this list and would appreciate a CC of
any reply.

Thanks

David

Here is my .config file.


#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13.2
# Sat Sep 24 22:28:33 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
CONFIG_I82092=m
# CONFIG_TCIC is not set
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_CONNMARK=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
CONFIG_I2C_SENSOR=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_KEYSPAN_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y


2005-09-27 02:35:12

by David Ronis

[permalink] [raw]
Subject: RE: problem with 2.6.13.[0-2]

Hi
Thanks for the reply.


DMA is on in both 2.6.12.6 and in 2.6.13.2. Here's what hdparm
/dev/hda gives:

in 2.6.12.6:

/dev/hda:
multcount = 16 (on)
IO_support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 195371568, start = 0

in 2.6.13.2 it's the same, except for

multcount = 0 (off)

Could this be the problem, and if so, would setting multcount to on
fix it? (I take it hdparm -m 16 /dev/hda would do it)

David

>>>>> "Parag" == Parag Warudkar <[email protected]> writes:

Parag> Is DMA enabled on the disk when you boot the kernel which
Parag> has problems? What does hdparm /dev/hdX say? Do things get
Parag> better if you do hdparm -d1 /dev/hdX?

Parag> Parag

Parag> -----Original Message-----
Parag> From: [email protected]
Parag> [mailto:[email protected]] On Behalf Of David Ronis
Parag> Sent: Sunday, September 25, 2005 2:25 PM
Parag> To: [email protected]
Parag> Subject: problem with 2.6.13.[0-2]


Parag> I recently tried upgrading from 2.6.12.6 to 2.6.13.[0-2] on an HP
Parag> pavilion zv5000 (a P4 with hyper-threading) running slackware-current.
Parag> The configuration and build went fine and the new kernel boots; however,
Parag> things run very very slowly. As far as I can tell, what is slow are
Parag> process involving any disk IO. For example, the part of the boot where
Parag> ldconfig is run seems to take 2-3 times as long as do things like
Parag> remaking the X font caches, loading programs etc.

Parag> This vaguely reminds me of my initial experience with this laptop, where
Parag> I hadn't turned on CONFIG_BLK_DEV_ATIIXP, although it is now (see
Parag> below). If I reboot with the old kernel, things run as before.

Parag> Finally, I don't subscribe to this list and would appreciate a CC of any
Parag> reply.

Parag> Thanks

Parag> David

Parag> Here is my .config file.


Parag> #
Parag> # Automatically generated make config: don't edit # Linux kernel
Parag> version: 2.6.13.2 # Sat Sep 24 22:28:33 2005 # CONFIG_X86=y CONFIG_MMU=y
Parag> CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y

Parag> #
Parag> # Code maturity level options
Parag> #
Parag> CONFIG_EXPERIMENTAL=y
Parag> CONFIG_CLEAN_COMPILE=y
Parag> CONFIG_LOCK_KERNEL=y
Parag> CONFIG_INIT_ENV_ARG_LIMIT=32

Parag> #
Parag> # General setup
Parag> #
Parag> CONFIG_LOCALVERSION=""
Parag> CONFIG_SWAP=y
Parag> CONFIG_SYSVIPC=y
Parag> # CONFIG_POSIX_MQUEUE is not set
Parag> # CONFIG_BSD_PROCESS_ACCT is not set
Parag> CONFIG_SYSCTL=y
Parag> # CONFIG_AUDIT is not set
Parag> CONFIG_HOTPLUG=y
Parag> CONFIG_KOBJECT_UEVENT=y
Parag> # CONFIG_IKCONFIG is not set
Parag> # CONFIG_CPUSETS is not set
Parag> # CONFIG_EMBEDDED is not set
Parag> CONFIG_KALLSYMS=y
Parag> # CONFIG_KALLSYMS_ALL is not set
Parag> # CONFIG_KALLSYMS_EXTRA_PASS is not set
Parag> CONFIG_PRINTK=y
Parag> CONFIG_BUG=y
Parag> CONFIG_BASE_FULL=y
Parag> CONFIG_FUTEX=y
Parag> CONFIG_EPOLL=y
Parag> CONFIG_SHMEM=y
Parag> CONFIG_CC_ALIGN_FUNCTIONS=0
Parag> CONFIG_CC_ALIGN_LABELS=0
Parag> CONFIG_CC_ALIGN_LOOPS=0
Parag> CONFIG_CC_ALIGN_JUMPS=0
Parag> # CONFIG_TINY_SHMEM is not set
Parag> CONFIG_BASE_SMALL=0

Parag> #
Parag> # Loadable module support
Parag> #
Parag> CONFIG_MODULES=y
Parag> CONFIG_MODULE_UNLOAD=y
Parag> # CONFIG_MODULE_FORCE_UNLOAD is not set
Parag> CONFIG_OBSOLETE_MODPARM=y
Parag> CONFIG_MODVERSIONS=y
Parag> # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y
Parag> CONFIG_STOP_MACHINE=y

Parag> #
Parag> # Processor type and features
Parag> #
Parag> CONFIG_X86_PC=y
Parag> # CONFIG_X86_ELAN is not set
Parag> # CONFIG_X86_VOYAGER is not set
Parag> # CONFIG_X86_NUMAQ is not set
Parag> # CONFIG_X86_SUMMIT is not set
Parag> # CONFIG_X86_BIGSMP is not set
Parag> # CONFIG_X86_VISWS is not set
Parag> # CONFIG_X86_GENERICARCH is not set
Parag> # CONFIG_X86_ES7000 is not set
Parag> # CONFIG_M386 is not set
Parag> # CONFIG_M486 is not set
Parag> # CONFIG_M586 is not set
Parag> # CONFIG_M586TSC is not set
Parag> # CONFIG_M586MMX is not set
Parag> # CONFIG_M686 is not set
Parag> # CONFIG_MPENTIUMII is not set
Parag> # CONFIG_MPENTIUMIII is not set
Parag> # CONFIG_MPENTIUMM is not set
Parag> CONFIG_MPENTIUM4=y
Parag> # CONFIG_MK6 is not set
Parag> # CONFIG_MK7 is not set
Parag> # CONFIG_MK8 is not set
Parag> # CONFIG_MCRUSOE is not set
Parag> # CONFIG_MEFFICEON is not set
Parag> # CONFIG_MWINCHIPC6 is not set
Parag> # CONFIG_MWINCHIP2 is not set
Parag> # CONFIG_MWINCHIP3D is not set
Parag> # CONFIG_MGEODEGX1 is not set
Parag> # CONFIG_MCYRIXIII is not set
Parag> # CONFIG_MVIAC3_2 is not set
Parag> # CONFIG_X86_GENERIC is not set
Parag> CONFIG_X86_CMPXCHG=y
Parag> CONFIG_X86_XADD=y
Parag> CONFIG_X86_L1_CACHE_SHIFT=7
Parag> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
Parag> CONFIG_GENERIC_CALIBRATE_DELAY=y
Parag> CONFIG_X86_WP_WORKS_OK=y
Parag> CONFIG_X86_INVLPG=y
Parag> CONFIG_X86_BSWAP=y
Parag> CONFIG_X86_POPAD_OK=y
Parag> CONFIG_X86_GOOD_APIC=y
Parag> CONFIG_X86_INTEL_USERCOPY=y
Parag> CONFIG_X86_USE_PPRO_CHECKSUM=y
Parag> CONFIG_HPET_TIMER=y
Parag> CONFIG_HPET_EMULATE_RTC=y
Parag> CONFIG_SMP=y
Parag> CONFIG_NR_CPUS=2
Parag> CONFIG_SCHED_SMT=y
Parag> # CONFIG_PREEMPT_NONE is not set
Parag> # CONFIG_PREEMPT_VOLUNTARY is not set
Parag> CONFIG_PREEMPT=y
Parag> CONFIG_PREEMPT_BKL=y
Parag> CONFIG_X86_LOCAL_APIC=y
Parag> CONFIG_X86_IO_APIC=y
Parag> CONFIG_X86_TSC=y
Parag> CONFIG_X86_MCE=y
Parag> CONFIG_X86_MCE_NONFATAL=y
Parag> CONFIG_X86_MCE_P4THERMAL=y
Parag> # CONFIG_TOSHIBA is not set
Parag> # CONFIG_I8K is not set
Parag> # CONFIG_X86_REBOOTFIXUPS is not set
Parag> # CONFIG_MICROCODE is not set
Parag> # CONFIG_X86_MSR is not set
Parag> CONFIG_X86_CPUID=m

Parag> #
Parag> # Firmware Drivers
Parag> #
Parag> # CONFIG_EDD is not set
Parag> CONFIG_NOHIGHMEM=y
Parag> # CONFIG_HIGHMEM4G is not set
Parag> # CONFIG_HIGHMEM64G is not set
Parag> CONFIG_SELECT_MEMORY_MODEL=y
Parag> CONFIG_FLATMEM_MANUAL=y
Parag> # CONFIG_DISCONTIGMEM_MANUAL is not set
Parag> # CONFIG_SPARSEMEM_MANUAL is not set
Parag> CONFIG_FLATMEM=y
Parag> CONFIG_FLAT_NODE_MEM_MAP=y
Parag> # CONFIG_MATH_EMULATION is not set
Parag> CONFIG_MTRR=y
Parag> # CONFIG_EFI is not set
Parag> # CONFIG_IRQBALANCE is not set
Parag> CONFIG_HAVE_DEC_LOCK=y
Parag> # CONFIG_REGPARM is not set
Parag> CONFIG_SECCOMP=y
Parag> # CONFIG_HZ_100 is not set
Parag> # CONFIG_HZ_250 is not set
Parag> CONFIG_HZ_1000=y
Parag> CONFIG_HZ=1000
Parag> CONFIG_PHYSICAL_START=0x100000
Parag> # CONFIG_KEXEC is not set

Parag> #
Parag> # Power management options (ACPI, APM)
Parag> #
Parag> CONFIG_PM=y
Parag> # CONFIG_PM_DEBUG is not set
Parag> # CONFIG_SOFTWARE_SUSPEND is not set

Parag> #
Parag> # ACPI (Advanced Configuration and Power Interface) Support #
Parag> CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y
Parag> CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y
Parag> CONFIG_ACPI_VIDEO=m # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y
Parag> CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not
Parag> set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set
Parag> CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set
Parag> CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y
Parag> CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is
Parag> not set

Parag> #
Parag> # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set

Parag> #
Parag> # CPU Frequency scaling
Parag> #
Parag> CONFIG_CPU_FREQ=y
Parag> CONFIG_CPU_FREQ_TABLE=y
Parag> # CONFIG_CPU_FREQ_DEBUG is not set
Parag> CONFIG_CPU_FREQ_STAT=y
Parag> CONFIG_CPU_FREQ_STAT_DETAILS=y
Parag> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
Parag> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
Parag> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not
Parag> set CONFIG_CPU_FREQ_GOV_USERSPACE=m # CONFIG_CPU_FREQ_GOV_ONDEMAND is
Parag> not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

Parag> #
Parag> # CPUFreq processor drivers
Parag> #
Parag> # CONFIG_X86_ACPI_CPUFREQ is not set
Parag> # CONFIG_X86_POWERNOW_K6 is not set
Parag> # CONFIG_X86_POWERNOW_K7 is not set
Parag> # CONFIG_X86_POWERNOW_K8 is not set
Parag> # CONFIG_X86_GX_SUSPMOD is not set
Parag> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_SPEEDSTEP_ICH=m #
Parag> CONFIG_X86_SPEEDSTEP_SMI is not set CONFIG_X86_P4_CLOCKMOD=m #
Parag> CONFIG_X86_CPUFREQ_NFORCE2 is not set # CONFIG_X86_LONGRUN is not set #
Parag> CONFIG_X86_LONGHAUL is not set

Parag> #
Parag> # shared options
Parag> #
Parag> CONFIG_X86_SPEEDSTEP_LIB=m
Parag> # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

Parag> #
Parag> # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y #
Parag> CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set #
Parag> CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y
Parag> CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not
Parag> set # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y
Parag> CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y #
Parag> CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set
Parag> # CONFIG_HOTPLUG_CPU is not set

Parag> #
Parag> # PCCARD (PCMCIA/CardBus) support
Parag> #
Parag> CONFIG_PCCARD=m
Parag> # CONFIG_PCMCIA_DEBUG is not set
Parag> CONFIG_PCMCIA=m
Parag> CONFIG_PCMCIA_LOAD_CIS=y
Parag> CONFIG_PCMCIA_IOCTL=y
Parag> CONFIG_CARDBUS=y

Parag> #
Parag> # PC-card bridges
Parag> #
Parag> CONFIG_YENTA=m
Parag> # CONFIG_PD6729 is not set
Parag> CONFIG_I82092=m
Parag> # CONFIG_TCIC is not set
Parag> CONFIG_PCCARD_NONSTATIC=m

Parag> #
Parag> # PCI Hotplug Support
Parag> #
Parag> # CONFIG_HOTPLUG_PCI is not set

Parag> #
Parag> # Executable file formats
Parag> #
Parag> CONFIG_BINFMT_ELF=y
Parag> CONFIG_BINFMT_AOUT=m
Parag> CONFIG_BINFMT_MISC=m

Parag> #
Parag> # Networking
Parag> #
Parag> CONFIG_NET=y

Parag> #
Parag> # Networking options
Parag> #
Parag> CONFIG_PACKET=m
Parag> # CONFIG_PACKET_MMAP is not set
Parag> CONFIG_UNIX=y
Parag> CONFIG_XFRM=y
Parag> CONFIG_XFRM_USER=m
Parag> CONFIG_NET_KEY=y
Parag> CONFIG_INET=y
Parag> CONFIG_IP_MULTICAST=y
Parag> CONFIG_IP_ADVANCED_ROUTER=y
Parag> CONFIG_ASK_IP_FIB_HASH=y
Parag> # CONFIG_IP_FIB_TRIE is not set
Parag> CONFIG_IP_FIB_HASH=y
Parag> # CONFIG_IP_MULTIPLE_TABLES is not set
Parag> CONFIG_IP_ROUTE_MULTIPATH=y
Parag> # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y
Parag> # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m #
Parag> CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set #
Parag> CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=m
Parag> CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_TUNNEL=m
Parag> CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set #
Parag> CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y

Parag> #
Parag> # IP: Virtual Server Configuration
Parag> #
Parag> # CONFIG_IP_VS is not set
Parag> CONFIG_IPV6=m
Parag> CONFIG_IPV6_PRIVACY=y
Parag> CONFIG_INET6_AH=m
Parag> CONFIG_INET6_ESP=m
Parag> CONFIG_INET6_IPCOMP=m
Parag> CONFIG_INET6_TUNNEL=m
Parag> CONFIG_IPV6_TUNNEL=m
Parag> CONFIG_NETFILTER=y
Parag> # CONFIG_NETFILTER_DEBUG is not set

Parag> #
Parag> # IP: Netfilter Configuration
Parag> #
Parag> CONFIG_IP_NF_CONNTRACK=m
Parag> CONFIG_IP_NF_CT_ACCT=y
Parag> CONFIG_IP_NF_CONNTRACK_MARK=y
Parag> CONFIG_IP_NF_CT_PROTO_SCTP=m
Parag> CONFIG_IP_NF_FTP=m
Parag> CONFIG_IP_NF_IRC=m
Parag> CONFIG_IP_NF_TFTP=m
Parag> # CONFIG_IP_NF_AMANDA is not set
Parag> # CONFIG_IP_NF_QUEUE is not set
Parag> CONFIG_IP_NF_IPTABLES=m
Parag> CONFIG_IP_NF_MATCH_LIMIT=m
Parag> CONFIG_IP_NF_MATCH_IPRANGE=m
Parag> CONFIG_IP_NF_MATCH_MAC=m
Parag> CONFIG_IP_NF_MATCH_PKTTYPE=m
Parag> CONFIG_IP_NF_MATCH_MARK=m
Parag> CONFIG_IP_NF_MATCH_MULTIPORT=m
Parag> CONFIG_IP_NF_MATCH_TOS=m
Parag> CONFIG_IP_NF_MATCH_RECENT=m
Parag> CONFIG_IP_NF_MATCH_ECN=m
Parag> CONFIG_IP_NF_MATCH_DSCP=m
Parag> CONFIG_IP_NF_MATCH_AH_ESP=m
Parag> CONFIG_IP_NF_MATCH_LENGTH=m
Parag> CONFIG_IP_NF_MATCH_TTL=m
Parag> CONFIG_IP_NF_MATCH_TCPMSS=m
Parag> CONFIG_IP_NF_MATCH_HELPER=m
Parag> CONFIG_IP_NF_MATCH_STATE=m
Parag> CONFIG_IP_NF_MATCH_CONNTRACK=m
Parag> CONFIG_IP_NF_MATCH_OWNER=m
Parag> CONFIG_IP_NF_MATCH_ADDRTYPE=m
Parag> CONFIG_IP_NF_MATCH_REALM=m
Parag> CONFIG_IP_NF_MATCH_SCTP=m
Parag> CONFIG_IP_NF_MATCH_COMMENT=m
Parag> CONFIG_IP_NF_MATCH_CONNMARK=m
Parag> CONFIG_IP_NF_MATCH_HASHLIMIT=m
Parag> CONFIG_IP_NF_FILTER=m
Parag> CONFIG_IP_NF_TARGET_REJECT=m
Parag> CONFIG_IP_NF_TARGET_LOG=m
Parag> CONFIG_IP_NF_TARGET_ULOG=m
Parag> CONFIG_IP_NF_TARGET_TCPMSS=m
Parag> CONFIG_IP_NF_NAT=m
Parag> CONFIG_IP_NF_NAT_NEEDED=y
Parag> CONFIG_IP_NF_TARGET_MASQUERADE=m
Parag> CONFIG_IP_NF_TARGET_REDIRECT=m
Parag> CONFIG_IP_NF_TARGET_NETMAP=m
Parag> CONFIG_IP_NF_TARGET_SAME=m
Parag> # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_IRC=m
Parag> CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_MANGLE=m
Parag> CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m
Parag> CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m
Parag> CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_TARGET_CONNMARK=m #
Parag> CONFIG_IP_NF_TARGET_CLUSTERIP is not set # CONFIG_IP_NF_RAW is not set
Parag> CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m
Parag> CONFIG_IP_NF_ARP_MANGLE=m

Parag> #
Parag> # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_IP6_NF_QUEUE
Parag> is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m
Parag> CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m
Parag> CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m
Parag> CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_MULTIPORT=m
Parag> CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_MARK=m
Parag> CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_AHESP=m
Parag> CONFIG_IP6_NF_MATCH_LENGTH=m CONFIG_IP6_NF_MATCH_EUI64=m
Parag> CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m
Parag> CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_RAW=m

Parag> #
Parag> # SCTP Configuration (EXPERIMENTAL)
Parag> #
Parag> # CONFIG_IP_SCTP is not set
Parag> # CONFIG_ATM is not set
Parag> # CONFIG_BRIDGE is not set
Parag> # CONFIG_VLAN_8021Q is not set
Parag> # CONFIG_DECNET is not set
Parag> CONFIG_LLC=m
Parag> # CONFIG_LLC2 is not set
Parag> CONFIG_IPX=m
Parag> CONFIG_IPX_INTERN=y
Parag> # CONFIG_ATALK is not set
Parag> # CONFIG_X25 is not set
Parag> # CONFIG_LAPB is not set
Parag> # CONFIG_NET_DIVERT is not set
Parag> # CONFIG_ECONET is not set
Parag> # CONFIG_WAN_ROUTER is not set
Parag> # CONFIG_NET_SCHED is not set
Parag> CONFIG_NET_CLS_ROUTE=y

Parag> #
Parag> # Network testing
Parag> #
Parag> # CONFIG_NET_PKTGEN is not set
Parag> # CONFIG_HAMRADIO is not set
Parag> # CONFIG_IRDA is not set
Parag> CONFIG_BT=m
Parag> # CONFIG_BT_L2CAP is not set
Parag> # CONFIG_BT_SCO is not set

Parag> #
Parag> # Bluetooth device drivers
Parag> #
Parag> # CONFIG_BT_HCIUSB is not set
Parag> # CONFIG_BT_HCIUART is not set
Parag> # CONFIG_BT_HCIBCM203X is not set
Parag> # CONFIG_BT_HCIBPA10X is not set
Parag> # CONFIG_BT_HCIBFUSB is not set
Parag> # CONFIG_BT_HCIDTL1 is not set
Parag> # CONFIG_BT_HCIBT3C is not set
Parag> # CONFIG_BT_HCIBLUECARD is not set
Parag> # CONFIG_BT_HCIBTUART is not set
Parag> # CONFIG_BT_HCIVHCI is not set

Parag> #
Parag> # Device Drivers
Parag> #

Parag> #
Parag> # Generic Driver Options
Parag> #
Parag> CONFIG_STANDALONE=y
Parag> CONFIG_PREVENT_FIRMWARE_BUILD=y
Parag> CONFIG_FW_LOADER=m
Parag> # CONFIG_DEBUG_DRIVER is not set

Parag> #
Parag> # Memory Technology Devices (MTD)
Parag> #
Parag> # CONFIG_MTD is not set

Parag> #
Parag> # Parallel port support
Parag> #
Parag> CONFIG_PARPORT=m
Parag> CONFIG_PARPORT_PC=m
Parag> # CONFIG_PARPORT_SERIAL is not set
Parag> # CONFIG_PARPORT_PC_FIFO is not set
Parag> # CONFIG_PARPORT_PC_SUPERIO is not set
Parag> # CONFIG_PARPORT_PC_PCMCIA is not set
Parag> # CONFIG_PARPORT_GSC is not set
Parag> # CONFIG_PARPORT_1284 is not set

Parag> #
Parag> # Plug and Play support
Parag> #
Parag> # CONFIG_PNP is not set

Parag> #
Parag> # Block devices
Parag> #
Parag> # CONFIG_BLK_DEV_FD is not set
Parag> # CONFIG_PARIDE is not set
Parag> # CONFIG_BLK_CPQ_DA is not set
Parag> # CONFIG_BLK_CPQ_CISS_DA is not set
Parag> # CONFIG_BLK_DEV_DAC960 is not set
Parag> # CONFIG_BLK_DEV_UMEM is not set
Parag> # CONFIG_BLK_DEV_COW_COMMON is not set
Parag> CONFIG_BLK_DEV_LOOP=m
Parag> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
Parag> CONFIG_BLK_DEV_NBD=m
Parag> # CONFIG_BLK_DEV_SX8 is not set
Parag> # CONFIG_BLK_DEV_UB is not set
Parag> # CONFIG_BLK_DEV_RAM is not set
Parag> CONFIG_BLK_DEV_RAM_COUNT=16
Parag> CONFIG_INITRAMFS_SOURCE=""
Parag> # CONFIG_LBD is not set
Parag> # CONFIG_CDROM_PKTCDVD is not set

Parag> #
Parag> # IO Schedulers
Parag> #
Parag> CONFIG_IOSCHED_NOOP=y
Parag> CONFIG_IOSCHED_AS=y
Parag> CONFIG_IOSCHED_DEADLINE=y
Parag> CONFIG_IOSCHED_CFQ=y
Parag> # CONFIG_ATA_OVER_ETH is not set

Parag> #
Parag> # ATA/ATAPI/MFM/RLL support
Parag> #
Parag> CONFIG_IDE=y
Parag> CONFIG_BLK_DEV_IDE=y

Parag> #
Parag> # Please see Documentation/ide.txt for help/info on IDE drives # #
Parag> CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set
Parag> CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set #
Parag> CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m #
Parag> CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set
Parag> CONFIG_BLK_DEV_IDESCSI=m # CONFIG_IDE_TASK_IOCTL is not set

Parag> #
Parag> # IDE chipset support/bugfixes
Parag> #
Parag> CONFIG_IDE_GENERIC=y
Parag> CONFIG_BLK_DEV_CMD640=y
Parag> CONFIG_BLK_DEV_CMD640_ENHANCED=y
Parag> CONFIG_BLK_DEV_IDEPCI=y
Parag> CONFIG_IDEPCI_SHARE_IRQ=y
Parag> # CONFIG_BLK_DEV_OFFBOARD is not set
Parag> CONFIG_BLK_DEV_GENERIC=y
Parag> # CONFIG_BLK_DEV_OPTI621 is not set
Parag> CONFIG_BLK_DEV_RZ1000=y
Parag> CONFIG_BLK_DEV_IDEDMA_PCI=y
Parag> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y #
Parag> CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=y #
Parag> CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set
Parag> CONFIG_BLK_DEV_ATIIXP=y # CONFIG_BLK_DEV_CMD64X is not set #
Parag> CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set #
Parag> CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set #
Parag> CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set #
Parag> CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y #
Parag> CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set #
Parag> CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is
Parag> not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is
Parag> not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is
Parag> not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is
Parag> not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y #
Parag> CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is
Parag> not set

Parag> #
Parag> # SCSI device support
Parag> #
Parag> CONFIG_SCSI=m
Parag> CONFIG_SCSI_PROC_FS=y

Parag> #
Parag> # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m
Parag> CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m
Parag> CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is
Parag> not set

Parag> #
Parag> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # #
Parag> CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set #
Parag> CONFIG_SCSI_LOGGING is not set

Parag> #
Parag> # SCSI Transport Attributes
Parag> #
Parag> # CONFIG_SCSI_SPI_ATTRS is not set
Parag> # CONFIG_SCSI_FC_ATTRS is not set
Parag> # CONFIG_SCSI_ISCSI_ATTRS is not set

Parag> #
Parag> # SCSI low-level drivers
Parag> #
Parag> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not
Parag> set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set #
Parag> CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set #
Parag> CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set #
Parag> CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set #
Parag> CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set #
Parag> CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set #
Parag> CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set #
Parag> CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set #
Parag> CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set #
Parag> CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set #
Parag> CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set #
Parag> CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m #
Parag> CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set #
Parag> CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set #
Parag> CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA24XX is not set #
Parag> CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set #
Parag> CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set #
Parag> CONFIG_SCSI_DEBUG is not set

Parag> #
Parag> # PCMCIA SCSI adapter support
Parag> #
Parag> # CONFIG_PCMCIA_AHA152X is not set
Parag> # CONFIG_PCMCIA_FDOMAIN is not set
Parag> # CONFIG_PCMCIA_NINJA_SCSI is not set
Parag> # CONFIG_PCMCIA_QLOGIC is not set
Parag> # CONFIG_PCMCIA_SYM53C500 is not set

Parag> #
Parag> # Multi-device support (RAID and LVM)
Parag> #
Parag> # CONFIG_MD is not set

Parag> #
Parag> # Fusion MPT device support
Parag> #
Parag> # CONFIG_FUSION is not set
Parag> # CONFIG_FUSION_SPI is not set
Parag> # CONFIG_FUSION_FC is not set

Parag> #
Parag> # IEEE 1394 (FireWire) support
Parag> #
Parag> CONFIG_IEEE1394=m

Parag> #
Parag> # Subsystem Options
Parag> #
Parag> # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is
Parag> not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
Parag> CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
Parag> # CONFIG_IEEE1394_EXPORT_FULL_API is not set

Parag> #
Parag> # Device Drivers
Parag> #
Parag> CONFIG_IEEE1394_PCILYNX=m
Parag> CONFIG_IEEE1394_OHCI1394=m

Parag> #
Parag> # Protocol Drivers
Parag> #
Parag> CONFIG_IEEE1394_VIDEO1394=m
Parag> CONFIG_IEEE1394_SBP2=m
Parag> # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m
Parag> CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m
Parag> CONFIG_IEEE1394_AMDTP=m

Parag> #
Parag> # I2O device support
Parag> #
Parag> CONFIG_I2O=m
Parag> CONFIG_I2O_EXT_ADAPTEC=y
Parag> CONFIG_I2O_CONFIG=m
Parag> CONFIG_I2O_CONFIG_OLD_IOCTL=y
Parag> CONFIG_I2O_BUS=m
Parag> CONFIG_I2O_BLOCK=m
Parag> CONFIG_I2O_SCSI=m
Parag> CONFIG_I2O_PROC=m

Parag> #
Parag> # Network device support
Parag> #
Parag> CONFIG_NETDEVICES=y
Parag> CONFIG_DUMMY=m
Parag> # CONFIG_BONDING is not set
Parag> # CONFIG_EQUALIZER is not set
Parag> CONFIG_TUN=m

Parag> #
Parag> # ARCnet devices
Parag> #
Parag> # CONFIG_ARCNET is not set

Parag> #
Parag> # Ethernet (10 or 100Mbit)
Parag> #
Parag> CONFIG_NET_ETHERNET=y
Parag> CONFIG_MII=m
Parag> # CONFIG_HAPPYMEAL is not set
Parag> # CONFIG_SUNGEM is not set
Parag> # CONFIG_NET_VENDOR_3COM is not set

Parag> #
Parag> # Tulip family network device support
Parag> #
Parag> # CONFIG_NET_TULIP is not set
Parag> # CONFIG_HP100 is not set
Parag> CONFIG_NET_PCI=y
Parag> # CONFIG_PCNET32 is not set
Parag> # CONFIG_AMD8111_ETH is not set
Parag> # CONFIG_ADAPTEC_STARFIRE is not set
Parag> # CONFIG_B44 is not set
Parag> # CONFIG_FORCEDETH is not set
Parag> # CONFIG_DGRS is not set
Parag> # CONFIG_EEPRO100 is not set
Parag> # CONFIG_E100 is not set
Parag> # CONFIG_FEALNX is not set
Parag> # CONFIG_NATSEMI is not set
Parag> # CONFIG_NE2K_PCI is not set
Parag> CONFIG_8139CP=m
Parag> CONFIG_8139TOO=m
Parag> CONFIG_8139TOO_PIO=y
Parag> # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not
Parag> set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set #
Parag> CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is
Parag> not set # CONFIG_VIA_RHINE is not set

Parag> #
Parag> # Ethernet (1000 Mbit)
Parag> #
Parag> # CONFIG_ACENIC is not set
Parag> # CONFIG_DL2K is not set
Parag> # CONFIG_E1000 is not set
Parag> # CONFIG_NS83820 is not set
Parag> # CONFIG_HAMACHI is not set
Parag> # CONFIG_YELLOWFIN is not set
Parag> # CONFIG_R8169 is not set
Parag> # CONFIG_SKGE is not set
Parag> # CONFIG_SK98LIN is not set
Parag> # CONFIG_VIA_VELOCITY is not set
Parag> # CONFIG_TIGON3 is not set
Parag> # CONFIG_BNX2 is not set

Parag> #
Parag> # Ethernet (10000 Mbit)
Parag> #
Parag> # CONFIG_IXGB is not set
Parag> # CONFIG_S2IO is not set

Parag> #
Parag> # Token Ring devices
Parag> #
Parag> # CONFIG_TR is not set

Parag> #
Parag> # Wireless LAN (non-hamradio)
Parag> #
Parag> CONFIG_NET_RADIO=y

Parag> #
Parag> # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not
Parag> set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_PCMCIA_NETWAVE is not
Parag> set

Parag> #
Parag> # Wireless 802.11 Frequency Hopping cards support # #
Parag> CONFIG_PCMCIA_RAYCS is not set

Parag> #
Parag> # Wireless 802.11b ISA/PCI cards support # # CONFIG_HERMES is not set #
Parag> CONFIG_ATMEL is not set

Parag> #
Parag> # Wireless 802.11b Pcmcia/Cardbus cards support # # CONFIG_AIRO_CS is
Parag> not set # CONFIG_PCMCIA_WL3501 is not set

Parag> #
Parag> # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54
Parag> is not set CONFIG_NET_WIRELESS=y

Parag> #
Parag> # PCMCIA network device support
Parag> #
Parag> # CONFIG_NET_PCMCIA is not set

Parag> #
Parag> # Wan interfaces
Parag> #
Parag> # CONFIG_WAN is not set
Parag> # CONFIG_FDDI is not set
Parag> # CONFIG_HIPPI is not set
Parag> # CONFIG_PLIP is not set
Parag> CONFIG_PPP=m
Parag> # CONFIG_PPP_MULTILINK is not set
Parag> CONFIG_PPP_FILTER=y
Parag> CONFIG_PPP_ASYNC=m
Parag> CONFIG_PPP_SYNC_TTY=m
Parag> CONFIG_PPP_DEFLATE=m
Parag> CONFIG_PPP_BSDCOMP=m
Parag> CONFIG_PPPOE=m
Parag> # CONFIG_SLIP is not set
Parag> # CONFIG_NET_FC is not set
Parag> # CONFIG_SHAPER is not set
Parag> # CONFIG_NETCONSOLE is not set
Parag> # CONFIG_NETPOLL is not set
Parag> # CONFIG_NET_POLL_CONTROLLER is not set

Parag> #
Parag> # ISDN subsystem
Parag> #
Parag> # CONFIG_ISDN is not set

Parag> #
Parag> # Telephony Support
Parag> #
Parag> # CONFIG_PHONE is not set

Parag> #
Parag> # Input device support
Parag> #
Parag> CONFIG_INPUT=y

Parag> #
Parag> # Userland interfaces
Parag> #
Parag> CONFIG_INPUT_MOUSEDEV=y
Parag> CONFIG_INPUT_MOUSEDEV_PSAUX=y
Parag> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
Parag> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
Parag> # CONFIG_INPUT_JOYDEV is not set
Parag> # CONFIG_INPUT_TSDEV is not set
Parag> CONFIG_INPUT_EVDEV=m
Parag> # CONFIG_INPUT_EVBUG is not set

Parag> #
Parag> # Input Device Drivers
Parag> #
Parag> CONFIG_INPUT_KEYBOARD=y
Parag> CONFIG_KEYBOARD_ATKBD=y
Parag> # CONFIG_KEYBOARD_SUNKBD is not set
Parag> # CONFIG_KEYBOARD_LKKBD is not set
Parag> # CONFIG_KEYBOARD_XTKBD is not set
Parag> # CONFIG_KEYBOARD_NEWTON is not set
Parag> CONFIG_INPUT_MOUSE=y
Parag> CONFIG_MOUSE_PS2=y
Parag> # CONFIG_MOUSE_SERIAL is not set
Parag> # CONFIG_MOUSE_VSXXXAA is not set
Parag> # CONFIG_INPUT_JOYSTICK is not set
Parag> # CONFIG_INPUT_TOUCHSCREEN is not set
Parag> CONFIG_INPUT_MISC=y
Parag> CONFIG_INPUT_PCSPKR=y
Parag> # CONFIG_INPUT_UINPUT is not set

Parag> #
Parag> # Hardware I/O ports
Parag> #
Parag> CONFIG_SERIO=y
Parag> CONFIG_SERIO_I8042=y
Parag> CONFIG_SERIO_SERPORT=m
Parag> # CONFIG_SERIO_CT82C710 is not set
Parag> # CONFIG_SERIO_PARKBD is not set
Parag> # CONFIG_SERIO_PCIPS2 is not set
Parag> CONFIG_SERIO_LIBPS2=y
Parag> # CONFIG_SERIO_RAW is not set
Parag> # CONFIG_GAMEPORT is not set

Parag> #
Parag> # Character devices
Parag> #
Parag> CONFIG_VT=y
Parag> CONFIG_VT_CONSOLE=y
Parag> CONFIG_HW_CONSOLE=y
Parag> # CONFIG_SERIAL_NONSTANDARD is not set

Parag> #
Parag> # Serial drivers
Parag> #
Parag> CONFIG_SERIAL_8250=m
Parag> CONFIG_SERIAL_8250_CS=m
Parag> # CONFIG_SERIAL_8250_ACPI is not set
Parag> CONFIG_SERIAL_8250_NR_UARTS=4
Parag> # CONFIG_SERIAL_8250_EXTENDED is not set

Parag> #
Parag> # Non-8250 serial port support
Parag> #
Parag> CONFIG_SERIAL_CORE=m
Parag> # CONFIG_SERIAL_JSM is not set
Parag> CONFIG_UNIX98_PTYS=y
Parag> CONFIG_LEGACY_PTYS=y
Parag> CONFIG_LEGACY_PTY_COUNT=256
Parag> CONFIG_PRINTER=m
Parag> # CONFIG_LP_CONSOLE is not set
Parag> # CONFIG_PPDEV is not set
Parag> # CONFIG_TIPAR is not set

Parag> #
Parag> # IPMI
Parag> #
Parag> # CONFIG_IPMI_HANDLER is not set

Parag> #
Parag> # Watchdog Cards
Parag> #
Parag> # CONFIG_WATCHDOG is not set
Parag> # CONFIG_HW_RANDOM is not set
Parag> # CONFIG_NVRAM is not set
Parag> CONFIG_RTC=y
Parag> # CONFIG_DTLK is not set
Parag> # CONFIG_R3964 is not set
Parag> # CONFIG_APPLICOM is not set
Parag> # CONFIG_SONYPI is not set

Parag> #
Parag> # Ftape, the floppy tape device driver
Parag> #
Parag> CONFIG_AGP=m
Parag> # CONFIG_AGP_ALI is not set
Parag> CONFIG_AGP_ATI=m
Parag> # CONFIG_AGP_AMD is not set
Parag> # CONFIG_AGP_AMD64 is not set
Parag> # CONFIG_AGP_INTEL is not set
Parag> # CONFIG_AGP_NVIDIA is not set
Parag> # CONFIG_AGP_SIS is not set
Parag> # CONFIG_AGP_SWORKS is not set
Parag> # CONFIG_AGP_VIA is not set
Parag> # CONFIG_AGP_EFFICEON is not set
Parag> CONFIG_DRM=m
Parag> # CONFIG_DRM_TDFX is not set
Parag> # CONFIG_DRM_R128 is not set
Parag> CONFIG_DRM_RADEON=m
Parag> # CONFIG_DRM_MGA is not set
Parag> # CONFIG_DRM_SIS is not set
Parag> # CONFIG_DRM_VIA is not set

Parag> #
Parag> # PCMCIA character devices
Parag> #
Parag> # CONFIG_SYNCLINK_CS is not set
Parag> # CONFIG_MWAVE is not set
Parag> # CONFIG_RAW_DRIVER is not set
Parag> # CONFIG_HPET is not set
Parag> # CONFIG_HANGCHECK_TIMER is not set

Parag> #
Parag> # TPM devices
Parag> #
Parag> # CONFIG_TCG_TPM is not set

Parag> #
Parag> # I2C support
Parag> #
Parag> CONFIG_I2C=m
Parag> CONFIG_I2C_CHARDEV=m

Parag> #
Parag> # I2C Algorithms
Parag> #
Parag> CONFIG_I2C_ALGOBIT=m
Parag> CONFIG_I2C_ALGOPCF=m
Parag> CONFIG_I2C_ALGOPCA=m

Parag> #
Parag> # I2C Hardware Bus support
Parag> #
Parag> CONFIG_I2C_ALI1535=m
Parag> CONFIG_I2C_ALI1563=m
Parag> CONFIG_I2C_ALI15X3=m
Parag> CONFIG_I2C_AMD756=m
Parag> # CONFIG_I2C_AMD756_S4882 is not set
Parag> CONFIG_I2C_AMD8111=m
Parag> CONFIG_I2C_I801=m
Parag> CONFIG_I2C_I810=m
Parag> CONFIG_I2C_PIIX4=m
Parag> CONFIG_I2C_ISA=m
Parag> CONFIG_I2C_NFORCE2=m
Parag> CONFIG_I2C_PARPORT=m
Parag> CONFIG_I2C_PARPORT_LIGHT=m
Parag> CONFIG_I2C_PROSAVAGE=m
Parag> CONFIG_I2C_SAVAGE4=m
Parag> CONFIG_SCx200_ACB=m
Parag> CONFIG_I2C_SIS5595=m
Parag> CONFIG_I2C_SIS630=m
Parag> CONFIG_I2C_SIS96X=m
Parag> # CONFIG_I2C_STUB is not set
Parag> CONFIG_I2C_VIA=m
Parag> CONFIG_I2C_VIAPRO=m
Parag> # CONFIG_I2C_VOODOO3 is not set
Parag> # CONFIG_I2C_PCA_ISA is not set
Parag> CONFIG_I2C_SENSOR=m

Parag> #
Parag> # Miscellaneous I2C Chip support
Parag> #
Parag> # CONFIG_SENSORS_DS1337 is not set
Parag> # CONFIG_SENSORS_DS1374 is not set
Parag> CONFIG_SENSORS_EEPROM=m
Parag> # CONFIG_SENSORS_PCF8574 is not set
Parag> # CONFIG_SENSORS_PCA9539 is not set
Parag> # CONFIG_SENSORS_PCF8591 is not set
Parag> # CONFIG_SENSORS_RTC8564 is not set
Parag> # CONFIG_SENSORS_MAX6875 is not set
Parag> # CONFIG_I2C_DEBUG_CORE is not set
Parag> # CONFIG_I2C_DEBUG_ALGO is not set
Parag> # CONFIG_I2C_DEBUG_BUS is not set
Parag> # CONFIG_I2C_DEBUG_CHIP is not set

Parag> #
Parag> # Dallas's 1-wire bus
Parag> #
Parag> # CONFIG_W1 is not set

Parag> #
Parag> # Hardware Monitoring support
Parag> #
Parag> CONFIG_HWMON=y
Parag> CONFIG_SENSORS_ADM1021=m
Parag> CONFIG_SENSORS_ADM1025=m
Parag> CONFIG_SENSORS_ADM1026=m
Parag> CONFIG_SENSORS_ADM1031=m
Parag> # CONFIG_SENSORS_ADM9240 is not set
Parag> CONFIG_SENSORS_ASB100=m
Parag> # CONFIG_SENSORS_ATXP1 is not set
Parag> CONFIG_SENSORS_DS1621=m
Parag> CONFIG_SENSORS_FSCHER=m
Parag> CONFIG_SENSORS_FSCPOS=m
Parag> CONFIG_SENSORS_GL518SM=m
Parag> CONFIG_SENSORS_GL520SM=m
Parag> CONFIG_SENSORS_IT87=m
Parag> CONFIG_SENSORS_LM63=m
Parag> CONFIG_SENSORS_LM75=m
Parag> CONFIG_SENSORS_LM77=m
Parag> CONFIG_SENSORS_LM78=m
Parag> CONFIG_SENSORS_LM80=m
Parag> CONFIG_SENSORS_LM83=m
Parag> CONFIG_SENSORS_LM85=m
Parag> CONFIG_SENSORS_LM87=m
Parag> CONFIG_SENSORS_LM90=m
Parag> CONFIG_SENSORS_LM92=m
Parag> CONFIG_SENSORS_MAX1619=m
Parag> CONFIG_SENSORS_PC87360=m
Parag> CONFIG_SENSORS_SIS5595=m
Parag> CONFIG_SENSORS_SMSC47M1=m
Parag> CONFIG_SENSORS_SMSC47B397=m
Parag> CONFIG_SENSORS_VIA686A=m
Parag> CONFIG_SENSORS_W83781D=m
Parag> CONFIG_SENSORS_W83L785TS=m
Parag> CONFIG_SENSORS_W83627HF=m
Parag> # CONFIG_SENSORS_W83627EHF is not set
Parag> # CONFIG_HWMON_DEBUG_CHIP is not set

Parag> #
Parag> # Misc devices
Parag> #
Parag> # CONFIG_IBM_ASM is not set

Parag> #
Parag> # Multimedia devices
Parag> #
Parag> CONFIG_VIDEO_DEV=m

Parag> #
Parag> # Video For Linux
Parag> #

Parag> #
Parag> # Video Adapters
Parag> #
Parag> CONFIG_VIDEO_BT848=m
Parag> CONFIG_VIDEO_BWQCAM=m
Parag> CONFIG_VIDEO_CQCAM=m
Parag> CONFIG_VIDEO_CPIA=m
Parag> CONFIG_VIDEO_CPIA_USB=m
Parag> # CONFIG_VIDEO_SAA5246A is not set
Parag> # CONFIG_VIDEO_SAA5249 is not set
Parag> # CONFIG_TUNER_3036 is not set
Parag> # CONFIG_VIDEO_STRADIS is not set
Parag> # CONFIG_VIDEO_ZORAN is not set
Parag> # CONFIG_VIDEO_SAA7134 is not set
Parag> # CONFIG_VIDEO_MXB is not set
Parag> # CONFIG_VIDEO_DPC is not set
Parag> # CONFIG_VIDEO_HEXIUM_ORION is not set
Parag> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
Parag> # CONFIG_VIDEO_CX88 is not set
Parag> # CONFIG_VIDEO_OVCAMCHIP is not set

Parag> #
Parag> # Radio Adapters
Parag> #
Parag> # CONFIG_RADIO_GEMTEK_PCI is not set
Parag> # CONFIG_RADIO_MAXIRADIO is not set
Parag> # CONFIG_RADIO_MAESTRO is not set

Parag> #
Parag> # Digital Video Broadcasting Devices
Parag> #
Parag> # CONFIG_DVB is not set
Parag> CONFIG_VIDEO_TUNER=m
Parag> CONFIG_VIDEO_BUF=m
Parag> CONFIG_VIDEO_BTCX=m
Parag> CONFIG_VIDEO_IR=m
Parag> CONFIG_VIDEO_TVEEPROM=m

Parag> #
Parag> # Graphics support
Parag> #
Parag> CONFIG_FB=y
Parag> CONFIG_FB_CFB_FILLRECT=y
Parag> CONFIG_FB_CFB_COPYAREA=y
Parag> CONFIG_FB_CFB_IMAGEBLIT=y
Parag> CONFIG_FB_SOFT_CURSOR=y
Parag> # CONFIG_FB_MACMODES is not set
Parag> CONFIG_FB_MODE_HELPERS=y
Parag> CONFIG_FB_TILEBLITTING=y
Parag> # CONFIG_FB_CIRRUS is not set
Parag> # CONFIG_FB_PM2 is not set
Parag> # CONFIG_FB_CYBER2000 is not set
Parag> # CONFIG_FB_ARC is not set
Parag> # CONFIG_FB_ASILIANT is not set
Parag> # CONFIG_FB_IMSTT is not set
Parag> CONFIG_FB_VGA16=m
Parag> CONFIG_FB_VESA=y
Parag> CONFIG_VIDEO_SELECT=y
Parag> # CONFIG_FB_HGA is not set
Parag> # CONFIG_FB_NVIDIA is not set
Parag> # CONFIG_FB_RIVA is not set
Parag> # CONFIG_FB_I810 is not set
Parag> # CONFIG_FB_INTEL is not set
Parag> # CONFIG_FB_MATROX is not set
Parag> # CONFIG_FB_RADEON_OLD is not set
Parag> CONFIG_FB_RADEON=m
Parag> CONFIG_FB_RADEON_I2C=y
Parag> # CONFIG_FB_RADEON_DEBUG is not set
Parag> # CONFIG_FB_ATY128 is not set
Parag> # CONFIG_FB_ATY is not set
Parag> # CONFIG_FB_SAVAGE is not set
Parag> # CONFIG_FB_SIS is not set
Parag> # CONFIG_FB_NEOMAGIC is not set
Parag> # CONFIG_FB_KYRO is not set
Parag> # CONFIG_FB_3DFX is not set
Parag> # CONFIG_FB_VOODOO1 is not set
Parag> # CONFIG_FB_TRIDENT is not set
Parag> # CONFIG_FB_GEODE is not set
Parag> # CONFIG_FB_S1D13XXX is not set
Parag> # CONFIG_FB_VIRTUAL is not set

Parag> #
Parag> # Console display driver support
Parag> #
Parag> CONFIG_VGA_CONSOLE=y
Parag> CONFIG_DUMMY_CONSOLE=y
Parag> CONFIG_FRAMEBUFFER_CONSOLE=m
Parag> # CONFIG_FONTS is not set
Parag> CONFIG_FONT_8x8=y
Parag> CONFIG_FONT_8x16=y

Parag> #
Parag> # Logo configuration
Parag> #
Parag> CONFIG_LOGO=y
Parag> CONFIG_LOGO_LINUX_MONO=y
Parag> CONFIG_LOGO_LINUX_VGA16=y
Parag> CONFIG_LOGO_LINUX_CLUT224=y
Parag> CONFIG_BACKLIGHT_LCD_SUPPORT=y
Parag> CONFIG_BACKLIGHT_CLASS_DEVICE=m
Parag> CONFIG_BACKLIGHT_DEVICE=y
Parag> CONFIG_LCD_CLASS_DEVICE=m
Parag> CONFIG_LCD_DEVICE=y

Parag> #
Parag> # Sound
Parag> #
Parag> CONFIG_SOUND=y

Parag> #
Parag> # Advanced Linux Sound Architecture
Parag> #
Parag> CONFIG_SND=m
Parag> CONFIG_SND_TIMER=m
Parag> CONFIG_SND_PCM=m
Parag> CONFIG_SND_RAWMIDI=m
Parag> CONFIG_SND_SEQUENCER=m
Parag> CONFIG_SND_SEQ_DUMMY=m
Parag> CONFIG_SND_OSSEMUL=y
Parag> CONFIG_SND_MIXER_OSS=m
Parag> CONFIG_SND_PCM_OSS=m
Parag> CONFIG_SND_SEQUENCER_OSS=y
Parag> CONFIG_SND_RTCTIMER=m
Parag> # CONFIG_SND_VERBOSE_PRINTK is not set
Parag> # CONFIG_SND_DEBUG is not set

Parag> #
Parag> # Generic devices
Parag> #
Parag> CONFIG_SND_MPU401_UART=m
Parag> CONFIG_SND_DUMMY=m
Parag> CONFIG_SND_VIRMIDI=m
Parag> CONFIG_SND_MTPAV=m
Parag> CONFIG_SND_SERIAL_U16550=m
Parag> CONFIG_SND_MPU401=m

Parag> #
Parag> # PCI devices
Parag> #
Parag> CONFIG_SND_AC97_CODEC=m
Parag> # CONFIG_SND_ALI5451 is not set
Parag> CONFIG_SND_ATIIXP=m
Parag> CONFIG_SND_ATIIXP_MODEM=m
Parag> # CONFIG_SND_AU8810 is not set
Parag> # CONFIG_SND_AU8820 is not set
Parag> # CONFIG_SND_AU8830 is not set
Parag> # CONFIG_SND_AZT3328 is not set
Parag> # CONFIG_SND_BT87X is not set
Parag> # CONFIG_SND_CS46XX is not set
Parag> # CONFIG_SND_CS4281 is not set
Parag> # CONFIG_SND_EMU10K1 is not set
Parag> # CONFIG_SND_EMU10K1X is not set
Parag> # CONFIG_SND_CA0106 is not set
Parag> # CONFIG_SND_KORG1212 is not set
Parag> # CONFIG_SND_MIXART is not set
Parag> # CONFIG_SND_NM256 is not set
Parag> # CONFIG_SND_RME32 is not set
Parag> # CONFIG_SND_RME96 is not set
Parag> # CONFIG_SND_RME9652 is not set
Parag> # CONFIG_SND_HDSP is not set
Parag> # CONFIG_SND_HDSPM is not set
Parag> # CONFIG_SND_TRIDENT is not set
Parag> # CONFIG_SND_YMFPCI is not set
Parag> # CONFIG_SND_ALS4000 is not set
Parag> # CONFIG_SND_CMIPCI is not set
Parag> # CONFIG_SND_ENS1370 is not set
Parag> # CONFIG_SND_ENS1371 is not set
Parag> # CONFIG_SND_ES1938 is not set
Parag> # CONFIG_SND_ES1968 is not set
Parag> # CONFIG_SND_MAESTRO3 is not set
Parag> # CONFIG_SND_FM801 is not set
Parag> # CONFIG_SND_ICE1712 is not set
Parag> # CONFIG_SND_ICE1724 is not set
Parag> # CONFIG_SND_INTEL8X0 is not set
Parag> # CONFIG_SND_INTEL8X0M is not set
Parag> # CONFIG_SND_SONICVIBES is not set
Parag> # CONFIG_SND_VIA82XX is not set
Parag> # CONFIG_SND_VIA82XX_MODEM is not set
Parag> # CONFIG_SND_VX222 is not set
Parag> # CONFIG_SND_HDA_INTEL is not set

Parag> #
Parag> # USB devices
Parag> #
Parag> # CONFIG_SND_USB_AUDIO is not set
Parag> # CONFIG_SND_USB_USX2Y is not set

Parag> #
Parag> # PCMCIA devices
Parag> #

Parag> #
Parag> # Open Sound System
Parag> #
Parag> # CONFIG_SOUND_PRIME is not set

Parag> #
Parag> # USB support
Parag> #
Parag> CONFIG_USB_ARCH_HAS_HCD=y
Parag> CONFIG_USB_ARCH_HAS_OHCI=y
Parag> CONFIG_USB=m
Parag> # CONFIG_USB_DEBUG is not set

Parag> #
Parag> # Miscellaneous USB options
Parag> #
Parag> CONFIG_USB_DEVICEFS=y
Parag> # CONFIG_USB_BANDWIDTH is not set
Parag> # CONFIG_USB_DYNAMIC_MINORS is not set
Parag> # CONFIG_USB_SUSPEND is not set
Parag> # CONFIG_USB_OTG is not set

Parag> #
Parag> # USB Host Controller Drivers
Parag> #
Parag> CONFIG_USB_EHCI_HCD=m
Parag> CONFIG_USB_EHCI_SPLIT_ISO=y
Parag> CONFIG_USB_EHCI_ROOT_HUB_TT=y
Parag> # CONFIG_USB_ISP116X_HCD is not set
Parag> CONFIG_USB_OHCI_HCD=m
Parag> # CONFIG_USB_OHCI_BIG_ENDIAN is not set
Parag> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
Parag> CONFIG_USB_UHCI_HCD=m
Parag> # CONFIG_USB_SL811_HCD is not set

Parag> #
Parag> # USB Device Class drivers
Parag> #
Parag> # CONFIG_USB_AUDIO is not set

Parag> #
Parag> # USB Bluetooth TTY can only be used with disabled Bluetooth subsystem #
Parag> # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set #
Parag> CONFIG_USB_PRINTER is not set

Parag> #
Parag> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
Parag> needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m
Parag> # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is
Parag> not set # CONFIG_USB_STORAGE_FREECOM is not set #
Parag> CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not
Parag> set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is
Parag> not set # CONFIG_USB_STORAGE_SDDR55 is not set #
Parag> CONFIG_USB_STORAGE_JUMPSHOT is not set

Parag> #
Parag> # USB Input Devices
Parag> #
Parag> CONFIG_USB_HID=m
Parag> CONFIG_USB_HIDINPUT=y
Parag> # CONFIG_HID_FF is not set
Parag> # CONFIG_USB_HIDDEV is not set

Parag> #
Parag> # USB HID Boot Protocol drivers
Parag> #
Parag> # CONFIG_USB_KBD is not set
Parag> # CONFIG_USB_MOUSE is not set
Parag> # CONFIG_USB_AIPTEK is not set
Parag> # CONFIG_USB_WACOM is not set
Parag> # CONFIG_USB_ACECAD is not set
Parag> # CONFIG_USB_KBTAB is not set
Parag> # CONFIG_USB_POWERMATE is not set
Parag> # CONFIG_USB_MTOUCH is not set
Parag> # CONFIG_USB_ITMTOUCH is not set
Parag> # CONFIG_USB_EGALAX is not set
Parag> # CONFIG_USB_XPAD is not set
Parag> CONFIG_USB_ATI_REMOTE=m
Parag> # CONFIG_USB_KEYSPAN_REMOTE is not set

Parag> #
Parag> # USB Imaging devices
Parag> #
Parag> # CONFIG_USB_MDC800 is not set
Parag> # CONFIG_USB_MICROTEK is not set

Parag> #
Parag> # USB Multimedia devices
Parag> #
Parag> # CONFIG_USB_DABUSB is not set
Parag> # CONFIG_USB_VICAM is not set
Parag> # CONFIG_USB_DSBR is not set
Parag> # CONFIG_USB_IBMCAM is not set
Parag> # CONFIG_USB_KONICAWC is not set
Parag> # CONFIG_USB_OV511 is not set
Parag> # CONFIG_USB_SE401 is not set
Parag> # CONFIG_USB_SN9C102 is not set
Parag> # CONFIG_USB_STV680 is not set
Parag> # CONFIG_USB_PWC is not set

Parag> #
Parag> # USB Network Adapters
Parag> #
Parag> # CONFIG_USB_CATC is not set
Parag> # CONFIG_USB_KAWETH is not set
Parag> # CONFIG_USB_PEGASUS is not set
Parag> # CONFIG_USB_RTL8150 is not set
Parag> # CONFIG_USB_USBNET is not set
Parag> # CONFIG_USB_ZD1201 is not set
Parag> CONFIG_USB_MON=y

Parag> #
Parag> # USB port drivers
Parag> #
Parag> # CONFIG_USB_USS720 is not set

Parag> #
Parag> # USB Serial Converter support
Parag> #
Parag> # CONFIG_USB_SERIAL is not set

Parag> #
Parag> # USB Miscellaneous drivers
Parag> #
Parag> # CONFIG_USB_EMI62 is not set
Parag> # CONFIG_USB_EMI26 is not set
Parag> # CONFIG_USB_AUERSWALD is not set
Parag> # CONFIG_USB_RIO500 is not set
Parag> # CONFIG_USB_LEGOTOWER is not set
Parag> # CONFIG_USB_LCD is not set
Parag> # CONFIG_USB_LED is not set
Parag> # CONFIG_USB_CYTHERM is not set
Parag> # CONFIG_USB_PHIDGETKIT is not set
Parag> # CONFIG_USB_PHIDGETSERVO is not set
Parag> # CONFIG_USB_IDMOUSE is not set
Parag> # CONFIG_USB_SISUSBVGA is not set
Parag> # CONFIG_USB_LD is not set
Parag> # CONFIG_USB_TEST is not set

Parag> #
Parag> # USB DSL modem support
Parag> #

Parag> #
Parag> # USB Gadget Support
Parag> #
Parag> # CONFIG_USB_GADGET is not set

Parag> #
Parag> # MMC/SD Card support
Parag> #
Parag> # CONFIG_MMC is not set

Parag> #
Parag> # InfiniBand support
Parag> #
Parag> # CONFIG_INFINIBAND is not set

Parag> #
Parag> # SN Devices
Parag> #

Parag> #
Parag> # File systems
Parag> #
Parag> CONFIG_EXT2_FS=y
Parag> # CONFIG_EXT2_FS_XATTR is not set
Parag> # CONFIG_EXT2_FS_XIP is not set
Parag> CONFIG_EXT3_FS=y
Parag> CONFIG_EXT3_FS_XATTR=y
Parag> # CONFIG_EXT3_FS_POSIX_ACL is not set
Parag> # CONFIG_EXT3_FS_SECURITY is not set
Parag> CONFIG_JBD=y
Parag> # CONFIG_JBD_DEBUG is not set
Parag> CONFIG_FS_MBCACHE=y
Parag> CONFIG_REISERFS_FS=m
Parag> # CONFIG_REISERFS_CHECK is not set
Parag> # CONFIG_REISERFS_PROC_INFO is not set
Parag> # CONFIG_REISERFS_FS_XATTR is not set
Parag> # CONFIG_JFS_FS is not set
Parag> CONFIG_FS_POSIX_ACL=y

Parag> #
Parag> # XFS support
Parag> #
Parag> # CONFIG_XFS_FS is not set
Parag> # CONFIG_MINIX_FS is not set
Parag> # CONFIG_ROMFS_FS is not set
Parag> CONFIG_INOTIFY=y
Parag> # CONFIG_QUOTA is not set
Parag> CONFIG_DNOTIFY=y
Parag> CONFIG_AUTOFS_FS=m
Parag> CONFIG_AUTOFS4_FS=m

Parag> #
Parag> # CD-ROM/DVD Filesystems
Parag> #
Parag> CONFIG_ISO9660_FS=m
Parag> CONFIG_JOLIET=y
Parag> CONFIG_ZISOFS=y
Parag> CONFIG_ZISOFS_FS=m
Parag> CONFIG_UDF_FS=m
Parag> CONFIG_UDF_NLS=y

Parag> #
Parag> # DOS/FAT/NT Filesystems
Parag> #
Parag> CONFIG_FAT_FS=m
Parag> CONFIG_MSDOS_FS=m
Parag> CONFIG_VFAT_FS=m
Parag> CONFIG_FAT_DEFAULT_CODEPAGE=437
Parag> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
Parag> CONFIG_NTFS_FS=m
Parag> # CONFIG_NTFS_DEBUG is not set
Parag> CONFIG_NTFS_RW=y

Parag> #
Parag> # Pseudo filesystems
Parag> #
Parag> CONFIG_PROC_FS=y
Parag> CONFIG_PROC_KCORE=y
Parag> CONFIG_SYSFS=y
Parag> # CONFIG_DEVPTS_FS_XATTR is not set
Parag> CONFIG_TMPFS=y
Parag> # CONFIG_TMPFS_XATTR is not set
Parag> # CONFIG_HUGETLBFS is not set
Parag> # CONFIG_HUGETLB_PAGE is not set
Parag> CONFIG_RAMFS=y

Parag> #
Parag> # Miscellaneous filesystems
Parag> #
Parag> # CONFIG_ADFS_FS is not set
Parag> # CONFIG_AFFS_FS is not set
Parag> # CONFIG_HFS_FS is not set
Parag> # CONFIG_HFSPLUS_FS is not set
Parag> # CONFIG_BEFS_FS is not set
Parag> # CONFIG_BFS_FS is not set
Parag> # CONFIG_EFS_FS is not set
Parag> # CONFIG_CRAMFS is not set
Parag> # CONFIG_VXFS_FS is not set
Parag> # CONFIG_HPFS_FS is not set
Parag> # CONFIG_QNX4FS_FS is not set
Parag> # CONFIG_SYSV_FS is not set
Parag> # CONFIG_UFS_FS is not set

Parag> #
Parag> # Network File Systems
Parag> #
Parag> CONFIG_NFS_FS=m
Parag> CONFIG_NFS_V3=y
Parag> # CONFIG_NFS_V3_ACL is not set
Parag> CONFIG_NFS_V4=y
Parag> # CONFIG_NFS_DIRECTIO is not set
Parag> CONFIG_NFSD=m
Parag> CONFIG_NFSD_V3=y
Parag> # CONFIG_NFSD_V3_ACL is not set
Parag> CONFIG_NFSD_V4=y
Parag> CONFIG_NFSD_TCP=y
Parag> CONFIG_LOCKD=m
Parag> CONFIG_LOCKD_V4=y
Parag> CONFIG_EXPORTFS=m
Parag> CONFIG_NFS_COMMON=y
Parag> CONFIG_SUNRPC=m
Parag> CONFIG_SUNRPC_GSS=m
Parag> CONFIG_RPCSEC_GSS_KRB5=m
Parag> CONFIG_RPCSEC_GSS_SPKM3=m
Parag> # CONFIG_SMB_FS is not set
Parag> # CONFIG_CIFS is not set
Parag> CONFIG_NCP_FS=m
Parag> CONFIG_NCPFS_PACKET_SIGNING=y
Parag> CONFIG_NCPFS_IOCTL_LOCKING=y
Parag> CONFIG_NCPFS_STRONG=y
Parag> CONFIG_NCPFS_NFS_NS=y
Parag> CONFIG_NCPFS_OS2_NS=y
Parag> CONFIG_NCPFS_SMALLDOS=y
Parag> CONFIG_NCPFS_NLS=y
Parag> CONFIG_NCPFS_EXTRAS=y
Parag> # CONFIG_CODA_FS is not set
Parag> # CONFIG_AFS_FS is not set

Parag> #
Parag> # Partition Types
Parag> #
Parag> # CONFIG_PARTITION_ADVANCED is not set
Parag> CONFIG_MSDOS_PARTITION=y

Parag> #
Parag> # Native Language Support
Parag> #
Parag> CONFIG_NLS=y
Parag> CONFIG_NLS_DEFAULT="iso8859-1"
Parag> CONFIG_NLS_CODEPAGE_437=m
Parag> # CONFIG_NLS_CODEPAGE_737 is not set
Parag> # CONFIG_NLS_CODEPAGE_775 is not set
Parag> # CONFIG_NLS_CODEPAGE_850 is not set
Parag> # CONFIG_NLS_CODEPAGE_852 is not set
Parag> # CONFIG_NLS_CODEPAGE_855 is not set
Parag> # CONFIG_NLS_CODEPAGE_857 is not set
Parag> # CONFIG_NLS_CODEPAGE_860 is not set
Parag> # CONFIG_NLS_CODEPAGE_861 is not set
Parag> CONFIG_NLS_CODEPAGE_862=m
Parag> # CONFIG_NLS_CODEPAGE_863 is not set
Parag> # CONFIG_NLS_CODEPAGE_864 is not set
Parag> # CONFIG_NLS_CODEPAGE_865 is not set
Parag> # CONFIG_NLS_CODEPAGE_866 is not set
Parag> # CONFIG_NLS_CODEPAGE_869 is not set
Parag> # CONFIG_NLS_CODEPAGE_936 is not set
Parag> # CONFIG_NLS_CODEPAGE_950 is not set
Parag> # CONFIG_NLS_CODEPAGE_932 is not set
Parag> # CONFIG_NLS_CODEPAGE_949 is not set
Parag> # CONFIG_NLS_CODEPAGE_874 is not set
Parag> CONFIG_NLS_ISO8859_8=m
Parag> # CONFIG_NLS_CODEPAGE_1250 is not set
Parag> # CONFIG_NLS_CODEPAGE_1251 is not set
Parag> # CONFIG_NLS_ASCII is not set
Parag> CONFIG_NLS_ISO8859_1=m
Parag> # CONFIG_NLS_ISO8859_2 is not set
Parag> # CONFIG_NLS_ISO8859_3 is not set
Parag> # CONFIG_NLS_ISO8859_4 is not set
Parag> # CONFIG_NLS_ISO8859_5 is not set
Parag> # CONFIG_NLS_ISO8859_6 is not set
Parag> # CONFIG_NLS_ISO8859_7 is not set
Parag> # CONFIG_NLS_ISO8859_9 is not set
Parag> # CONFIG_NLS_ISO8859_13 is not set
Parag> # CONFIG_NLS_ISO8859_14 is not set
Parag> # CONFIG_NLS_ISO8859_15 is not set
Parag> # CONFIG_NLS_KOI8_R is not set
Parag> # CONFIG_NLS_KOI8_U is not set
Parag> # CONFIG_NLS_UTF8 is not set

Parag> #
Parag> # Profiling support
Parag> #
Parag> # CONFIG_PROFILING is not set

Parag> #
Parag> # Kernel hacking
Parag> #
Parag> # CONFIG_PRINTK_TIME is not set
Parag> CONFIG_DEBUG_KERNEL=y
Parag> CONFIG_MAGIC_SYSRQ=y
Parag> CONFIG_LOG_BUF_SHIFT=15
Parag> # CONFIG_SCHEDSTATS is not set
Parag> # CONFIG_DEBUG_SLAB is not set
Parag> # CONFIG_DEBUG_PREEMPT is not set
Parag> # CONFIG_DEBUG_SPINLOCK is not set
Parag> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not
Parag> set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set #
Parag> CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set
Parag> CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set #
Parag> CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set #
Parag> CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_4KSTACKS is not set
Parag> CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y

Parag> #
Parag> # Security options
Parag> #
Parag> # CONFIG_KEYS is not set
Parag> # CONFIG_SECURITY is not set

Parag> #
Parag> # Cryptographic options
Parag> #
Parag> CONFIG_CRYPTO=y
Parag> CONFIG_CRYPTO_HMAC=y
Parag> CONFIG_CRYPTO_NULL=m
Parag> CONFIG_CRYPTO_MD4=m
Parag> CONFIG_CRYPTO_MD5=y
Parag> CONFIG_CRYPTO_SHA1=m
Parag> CONFIG_CRYPTO_SHA256=m
Parag> CONFIG_CRYPTO_SHA512=m
Parag> CONFIG_CRYPTO_WP512=m
Parag> CONFIG_CRYPTO_TGR192=m
Parag> CONFIG_CRYPTO_DES=m
Parag> CONFIG_CRYPTO_BLOWFISH=m
Parag> CONFIG_CRYPTO_TWOFISH=m
Parag> CONFIG_CRYPTO_SERPENT=m
Parag> CONFIG_CRYPTO_AES_586=m
Parag> CONFIG_CRYPTO_CAST5=m
Parag> CONFIG_CRYPTO_CAST6=m
Parag> CONFIG_CRYPTO_TEA=m
Parag> CONFIG_CRYPTO_ARC4=m
Parag> CONFIG_CRYPTO_KHAZAD=m
Parag> CONFIG_CRYPTO_ANUBIS=m
Parag> CONFIG_CRYPTO_DEFLATE=m
Parag> CONFIG_CRYPTO_MICHAEL_MIC=m
Parag> CONFIG_CRYPTO_CRC32C=m
Parag> # CONFIG_CRYPTO_TEST is not set

Parag> #
Parag> # Hardware crypto devices
Parag> #
Parag> # CONFIG_CRYPTO_DEV_PADLOCK is not set

Parag> #
Parag> # Library routines
Parag> #
Parag> CONFIG_CRC_CCITT=m
Parag> CONFIG_CRC32=m
Parag> CONFIG_LIBCRC32C=m
Parag> CONFIG_ZLIB_INFLATE=m
Parag> CONFIG_ZLIB_DEFLATE=m
Parag> CONFIG_GENERIC_HARDIRQS=y
Parag> CONFIG_GENERIC_IRQ_PROBE=y
Parag> CONFIG_X86_SMP=y
Parag> CONFIG_X86_HT=y
Parag> CONFIG_X86_BIOS_REBOOT=y
Parag> CONFIG_X86_TRAMPOLINE=y
Parag> CONFIG_PC=y

Parag> -
Parag> To unsubscribe from this list: send the line "unsubscribe linux-kernel"
Parag> in the body of a message to [email protected] More majordomo
Parag> info at http://vger.kernel.org/majordomo-info.html
Parag> Please read the FAQ at http://www.tux.org/lkml/



2005-09-28 02:56:17

by Parag Warudkar

[permalink] [raw]
Subject: RE: problem with 2.6.13.[0-2]



> DMA is on in both 2.6.12.6 and in 2.6.13.2. Here's what hdparm
> /dev/hda gives:
>
> in 2.6.12.6:
>
> /dev/hda:
> multcount = 16 (on)
> IO_support = 0 (default 16-bit)
> unmaskirq = 0 (off)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> readonly = 0 (off)
> readahead = 256 (on)
> geometry = 65535/16/63, sectors = 195371568, start = 0
>
> in 2.6.13.2 it's the same, except for
>
> multcount = 0 (off)
>
> Could this be the problem, and if so, would setting multcount to on
> fix it? (I take it hdparm -m 16 /dev/hda would do it)

I doubt if multcount will make a difference, but you can try.
Probably next best thing to do is profile the slow kernel to find where it
is spending time. (pass profile=2 on kernel command line and use
readprofile or use oprofile).

Did you try hdparm -tT /dev/hda? It's going to be slow, thats for sure
from what you described but try that and then post dmesg (for both
kernels) and profile results - may be someone will get a clue from that.

Parag

2005-09-29 01:37:38

by David Ronis

[permalink] [raw]
Subject: RE: problem with 2.6.13.[0-2]

On Tue, 2005-09-27 at 22:55 -0400, Parag Warudkar wrote:
>
> > DMA is on in both 2.6.12.6 and in 2.6.13.2. Here's what hdparm
> > /dev/hda gives:
> >
> > in 2.6.12.6:
> >
> > /dev/hda:
> > multcount = 16 (on)
> > IO_support = 0 (default 16-bit)
> > unmaskirq = 0 (off)
> > using_dma = 1 (on)
> > keepsettings = 0 (off)
> > readonly = 0 (off)
> > readahead = 256 (on)
> > geometry = 65535/16/63, sectors = 195371568, start = 0
> >
> > in 2.6.13.2 it's the same, except for
> >
> > multcount = 0 (off)
> >
> > Could this be the problem, and if so, would setting multcount to on
> > fix it? (I take it hdparm -m 16 /dev/hda would do it)
>
> I doubt if multcount will make a difference, but you can try.
> Probably next best thing to do is profile the slow kernel to find where it
> is spending time. (pass profile=2 on kernel command line and use
> readprofile or use oprofile).
>
> Did you try hdparm -tT /dev/hda? It's going to be slow, thats for sure
> from what you described but try that and then post dmesg (for both
> kernels) and profile results - may be someone will get a clue from that.
>
> Parag
>
>

Hi Parag,

Here's what I get:

In 2.6.12.6:

/dev/hda:
Timing cached reads: 1140 MB in 2.00 seconds = 569.80 MB/sec
Timing buffered disk reads: 102 MB in 3.02 seconds = 33.80 MB/sec

In 2.6.13.2:

/dev/hda:
Timing cached reads: 28 MB in 2.15 seconds = 13.03 MB/sec
Timing buffered disk reads: 14 MB in 3.30 seconds = 4.24 MB/sec

and after hdparm -m 16 /dev/hda (recall this is the default in 2.6.12.6)

/dev/hda:
Timing cached reads: 24 MB in 2.05 seconds = 11.73 MB/sec
Timing buffered disk reads: 36 MB in 3.11 seconds = 11.56 MB/sec

I ran thing a few times in each case and the results were close. There
was nothing in dmesg.

David


2005-09-29 04:13:25

by Parag Warudkar

[permalink] [raw]
Subject: RE: problem with 2.6.13.[0-2]

>
> In 2.6.13.2:
>
> /dev/hda:
> Timing cached reads: 28 MB in 2.15 seconds = 13.03 MB/sec
> Timing buffered disk reads: 14 MB in 3.30 seconds = 4.24 MB/sec
>
> and after hdparm -m 16 /dev/hda (recall this is the default in 2.6.12.6)
>
> /dev/hda:
> Timing cached reads: 24 MB in 2.05 seconds = 11.73 MB/sec
> Timing buffered disk reads: 36 MB in 3.11 seconds = 11.56 MB/sec
>
> I ran thing a few times in each case and the results were close. There
> was nothing in dmesg.
>
> David
>

Hey that 4.24 MB/sec hints at DMA being busted although it claims to be on. Can you post the complete dmesg output for both kernels please?

Parag



2005-09-29 06:20:50

by Jean Delvare

[permalink] [raw]
Subject: Re: problem with 2.6.13.[0-2]

Hi David,

[David Ronis]
> In 2.6.12.6:
>
> /dev/hda:
> Timing cached reads: 1140 MB in 2.00 seconds = 569.80 MB/sec
> Timing buffered disk reads: 102 MB in 3.02 seconds = 33.80 MB/sec
>
> In 2.6.13.2:
>
> /dev/hda:
> Timing cached reads: 28 MB in 2.15 seconds = 13.03 MB/sec
> Timing buffered disk reads: 14 MB in 3.30 seconds = 4.24 MB/sec
>
> and after hdparm -m 16 /dev/hda (recall this is the default in 2.6.12.6)
>
> /dev/hda:
> Timing cached reads: 24 MB in 2.05 seconds = 11.73 MB/sec
> Timing buffered disk reads: 36 MB in 3.11 seconds = 11.56 MB/sec
>
> I ran thing a few times in each case and the results were close. There
> was nothing in dmesg.

Try hdparm -i /dev/hda on both kernels, this will tell you the
controller/drive operation mode:

PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
* signifies the current active mode

I expect you to find that your IDE controller is in UDMA mode on
2.6.12.6 but not on 2.6.13.2. The figures you obtain for the latter
suggest mdma2 (those max throughput is 16 MB/sec IIRC) at best.

If I'm right, then you will have to find out which driver your IDE
controller uses, and why it decided that UDMA was no good for your
controller/driver combination. You may want to try the linux-ide list
for a more assistance, my own knowledge of that matter stops here ;)

--
Jean Delvare

Subject: Re: problem with 2.6.13.[0-2]

On 9/25/05, David Ronis <[email protected]> wrote:
>
> I recently tried upgrading from 2.6.12.6 to 2.6.13.[0-2] on an HP
> pavilion zv5000 (a P4 with hyper-threading) running slackware-current.
> The configuration and build went fine and the new kernel boots;
> however, things run very very slowly. As far as I can tell, what is
> slow are process involving any disk IO. For example, the part of the
> boot where ldconfig is run seems to take 2-3 times as long as do
> things like remaking the X font caches, loading programs etc.
>
> This vaguely reminds me of my initial experience with this laptop,
> where I hadn't turned on CONFIG_BLK_DEV_ATIIXP, although it is now
> (see below). If I reboot with the old kernel, things run as before.

According to this page http://web.purplefrog.com/~thoth/zv5000/
this laptop uses nForce3 chipset so you should turn on AMD/nForce
IDE driver (CONFIG_BLK_DEV_AMD74XX). Does it help?

Bartlomiej

2005-09-29 21:30:35

by David Ronis

[permalink] [raw]
Subject: Re: problem with 2.6.13.[0-2]

Hi Jean,

I'm sending this to the linux-ide list as suggested, so first a very
brief summary of the problem:

I'm running a hp pavillion ZV5240ca laptop. The kernel
has the ATIIXP driver installed, and this is what is
loaded for the hard-drive (according to lshw). On
upgrading from 2.6.12.6 to 2.6.13.[0-2] I noticed a huge
slowdown in disk performance (see below for timings) and
have been getting some help tracking the problem down on
the linux-kernel list. (I don't subscribe to either
list so please CC me).

Ok, bakc to Jean. I tried your suggestion; here's what I get running
hdparm -i /dev/hda

On 2.6.12.6:

/dev/hda:

Model=ST9100823A, FwRev=3.00, SerialNo=3LG0V6AP
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195371568
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

On 2.6.13.2:

/dev/hda:

Model=ST9100823A, FwRev=3.00, SerialNo=3LG0V6AP
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=195371568
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:

* signifies the current active mode

They are identical except for the MultSect field (which was already
apparent from the simple hdparm output). As I wrote earlier, I tried
changing it to 16 in 2.6.13.2, but it made a next to no change in the
timings.

I will post the full dmesg output next time I reboot, but greping for
hda or ide0 shows nothing out of the ordinary, at least to me.


David


On Thu, 2005-09-29 at 08:20 +0200, Jean Delvare wrote:
> Hi David,
>
> [David Ronis]
> > In 2.6.12.6:
> >
> > /dev/hda:
> > Timing cached reads: 1140 MB in 2.00 seconds = 569.80 MB/sec
> > Timing buffered disk reads: 102 MB in 3.02 seconds = 33.80 MB/sec
> >
> > In 2.6.13.2:
> >
> > /dev/hda:
> > Timing cached reads: 28 MB in 2.15 seconds = 13.03 MB/sec
> > Timing buffered disk reads: 14 MB in 3.30 seconds = 4.24 MB/sec
> >
> > and after hdparm -m 16 /dev/hda (recall this is the default in 2.6.12.6)
> >
> > /dev/hda:
> > Timing cached reads: 24 MB in 2.05 seconds = 11.73 MB/sec
> > Timing buffered disk reads: 36 MB in 3.11 seconds = 11.56 MB/sec
> >
> > I ran thing a few times in each case and the results were close. There
> > was nothing in dmesg.
>
> Try hdparm -i /dev/hda on both kernels, this will tell you the
> controller/drive operation mode:
>
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> * signifies the current active mode
>
> I expect you to find that your IDE controller is in UDMA mode on
> 2.6.12.6 but not on 2.6.13.2. The figures you obtain for the latter
> suggest mdma2 (those max throughput is 16 MB/sec IIRC) at best.
>
> If I'm right, then you will have to find out which driver your IDE
> controller uses, and why it decided that UDMA was no good for your
> controller/driver combination. You may want to try the linux-ide list
> for a more assistance, my own knowledge of that matter stops here ;)
>

2005-09-29 21:35:03

by David Ronis

[permalink] [raw]
Subject: Re: problem with 2.6.13.[0-2]

Thanks for the reply. lspci and lshw both show that it is not an
nvidia, rather the ATI chip. The 5000 is a series, so perhaps they
changed things mid-stream. My exact model is zv5240CA.

David

On Thu, 2005-09-29 at 12:29 +0200, Bartlomiej Zolnierkiewicz wrote:
> On 9/25/05, David Ronis <[email protected]> wrote:
> >
> > I recently tried upgrading from 2.6.12.6 to 2.6.13.[0-2] on an HP
> > pavilion zv5000 (a P4 with hyper-threading) running slackware-current.
> > The configuration and build went fine and the new kernel boots;
> > however, things run very very slowly. As far as I can tell, what is
> > slow are process involving any disk IO. For example, the part of the
> > boot where ldconfig is run seems to take 2-3 times as long as do
> > things like remaking the X font caches, loading programs etc.
> >
> > This vaguely reminds me of my initial experience with this laptop,
> > where I hadn't turned on CONFIG_BLK_DEV_ATIIXP, although it is now
> > (see below). If I reboot with the old kernel, things run as before.
>
> According to this page http://web.purplefrog.com/~thoth/zv5000/
> this laptop uses nForce3 chipset so you should turn on AMD/nForce
> IDE driver (CONFIG_BLK_DEV_AMD74XX). Does it help?
>
> Bartlomiej
>
>