This adds LTE skus for villager device tree files.
Signed-off-by: Jimmy Chen <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 2 ++
.../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
.../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
.../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
.../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
8 files changed, 48 insertions(+), 11 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index bb9f4eb3e65a0..6d81ff12f5af2 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index cfe2741456a1a..25f31c81b2b74 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -83,17 +83,6 @@ spi_flash: flash@0 {
};
};
-/* Modem setup is different on Chrome setups than typical Qualcomm setup */
-&remoteproc_mpss {
- status = "okay";
- compatible = "qcom,sc7280-mss-pil";
- iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
- interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
- memory-region = <&mba_mem>, <&mpss_mem>;
- firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
- "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
-};
-
&remoteproc_wpss {
status = "okay";
firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index e9ca6c5d24a16..921eccfec39ae 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -9,6 +9,7 @@
#include "sc7280-herobrine.dtsi"
#include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index c1647a85a371a..c1a6719687252 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
/ {
model = "Google Herobrine (rev1+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
new file mode 100644
index 0000000000000..a4809dd2f4e8a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for LTE SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+&remoteproc_mpss {
+ status = "okay";
+ compatible = "qcom,sc7280-mss-pil";
+ iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+ memory-region = <&mba_mem>, <&mpss_mem>;
+ firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
+ "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
new file mode 100644
index 0000000000000..672cb78e3088f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine-villager-r0.dts"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+ model = "Google Villager (rev0) with LTE";
+ compatible = "google,villager-rev0-sku0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
new file mode 100644
index 0000000000000..2f05a19cc388e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine-villager-r1.dts"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+ model = "Google Villager (rev1+) with LTE";
+ compatible = "google,villager-sku0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 6d3ff80582ae9..fba7e938ce35a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
#include "sc7280-idp.dtsi"
#include "pmr735a.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
--
2.25.1
On 5.07.2022 04:22, Jimmy Chen wrote:
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <[email protected]>
> ---
>
> arch/arm64/boot/dts/qcom/Makefile | 2 ++
> .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
> 8 files changed, 48 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index bb9f4eb3e65a0..6d81ff12f5af2 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index cfe2741456a1a..25f31c81b2b74 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -83,17 +83,6 @@ spi_flash: flash@0 {
> };
> };
>
> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> -&remoteproc_mpss {
> - status = "okay";
> - compatible = "qcom,sc7280-mss-pil";
> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
> - memory-region = <&mba_mem>, <&mpss_mem>;
> - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> -};
> -
> &remoteproc_wpss {
> status = "okay";
> firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index e9ca6c5d24a16..921eccfec39ae 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -9,6 +9,7 @@
>
> #include "sc7280-herobrine.dtsi"
> #include "sc7280-herobrine-audio-wcd9385.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> index c1647a85a371a..c1a6719687252 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Google Herobrine (rev1+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> new file mode 100644
> index 0000000000000..a4809dd2f4e8a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Herobrine dts fragment for LTE SKUs
> + *
> + * Copyright 2022 Google LLC.
> + */
> +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> +&remoteproc_mpss {
Hi, just a minor nit.
It was recently agreed upon that the status property should go last to
make things consistent with other DTs (qcom is - as usual - a special
snowflake :D). Could you please fix that up? The rest looks good.
Konrad
> + status = "okay";
> + compatible = "qcom,sc7280-mss-pil";
> + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> + memory-region = <&mba_mem>, <&mpss_mem>;
> + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> new file mode 100644
> index 0000000000000..672cb78e3088f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev0) with LTE";
> + compatible = "google,villager-rev0-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> new file mode 100644
> index 0000000000000..2f05a19cc388e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r1.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev1+) with LTE";
> + compatible = "google,villager-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 6d3ff80582ae9..fba7e938ce35a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -10,6 +10,7 @@
> #include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
> #include "sc7280-idp.dtsi"
> #include "pmr735a.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
Hi,
On Wed, Jul 6, 2022 at 5:31 AM Konrad Dybcio
<[email protected]> wrote:
>
>
>
> On 5.07.2022 04:22, Jimmy Chen wrote:
> > This adds LTE skus for villager device tree files.
> >
> > Signed-off-by: Jimmy Chen <[email protected]>
> > ---
> >
> > arch/arm64/boot/dts/qcom/Makefile | 2 ++
> > .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
> > arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> > .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
> > .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
> > .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> > .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> > arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
> > 8 files changed, 48 insertions(+), 11 deletions(-)
> > create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> > create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> > create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> >
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index bb9f4eb3e65a0..6d81ff12f5af2 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> > index cfe2741456a1a..25f31c81b2b74 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> > @@ -83,17 +83,6 @@ spi_flash: flash@0 {
> > };
> > };
> >
> > -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> > -&remoteproc_mpss {
> > - status = "okay";
> > - compatible = "qcom,sc7280-mss-pil";
> > - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> > - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
> > - memory-region = <&mba_mem>, <&mpss_mem>;
> > - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> > - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> > -};
> > -
> > &remoteproc_wpss {
> > status = "okay";
> > firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> > index e9ca6c5d24a16..921eccfec39ae 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> > @@ -9,6 +9,7 @@
> >
> > #include "sc7280-herobrine.dtsi"
> > #include "sc7280-herobrine-audio-wcd9385.dtsi"
> > +#include "sc7280-herobrine-lte-sku.dtsi"
> >
> > / {
> > model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> > index c1647a85a371a..c1a6719687252 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> > @@ -8,6 +8,7 @@
> > /dts-v1/;
> >
> > #include "sc7280-herobrine.dtsi"
> > +#include "sc7280-herobrine-lte-sku.dtsi"
> >
> > / {
> > model = "Google Herobrine (rev1+)";
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> > new file mode 100644
> > index 0000000000000..a4809dd2f4e8a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> > @@ -0,0 +1,15 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Google Herobrine dts fragment for LTE SKUs
> > + *
> > + * Copyright 2022 Google LLC.
> > + */
> > +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> > +&remoteproc_mpss {
> Hi, just a minor nit.
>
> It was recently agreed upon that the status property should go last to
> make things consistent with other DTs (qcom is - as usual - a special
> snowflake :D). Could you please fix that up? The rest looks good.
>
> Konrad
I'm not aware of this new convention. Can you please provide a link?
-Doug
Hi,
On Mon, Jul 4, 2022 at 7:22 PM Jimmy Chen <[email protected]> wrote:
>
> This adds LTE skus for villager device tree files.
>
> Signed-off-by: Jimmy Chen <[email protected]>
> ---
>
> arch/arm64/boot/dts/qcom/Makefile | 2 ++
> .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
> .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
> .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
> 8 files changed, 48 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
High level comment: your threading is very strange here. Can you use
"git send-email" to send your patches? It's definitely hard to follow
things. Patch #2 in the series should be "In-Reply-To" patch #1.
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index bb9f4eb3e65a0..6d81ff12f5af2 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> index cfe2741456a1a..25f31c81b2b74 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
> @@ -83,17 +83,6 @@ spi_flash: flash@0 {
> };
> };
>
> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> -&remoteproc_mpss {
> - status = "okay";
> - compatible = "qcom,sc7280-mss-pil";
> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
> - memory-region = <&mba_mem>, <&mpss_mem>;
> - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> -};
> -
> &remoteproc_wpss {
> status = "okay";
> firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index e9ca6c5d24a16..921eccfec39ae 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -9,6 +9,7 @@
>
> #include "sc7280-herobrine.dtsi"
> #include "sc7280-herobrine-audio-wcd9385.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> index c1647a85a371a..c1a6719687252 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
>
> #include "sc7280-herobrine.dtsi"
> +#include "sc7280-herobrine-lte-sku.dtsi"
>
> / {
> model = "Google Herobrine (rev1+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> new file mode 100644
> index 0000000000000..a4809dd2f4e8a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Herobrine dts fragment for LTE SKUs
> + *
> + * Copyright 2022 Google LLC.
> + */
Blank line here please.
> +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
> +&remoteproc_mpss {
> + status = "okay";
> + compatible = "qcom,sc7280-mss-pil";
> + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
> + memory-region = <&mba_mem>, <&mpss_mem>;
> + firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
> + "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> new file mode 100644
> index 0000000000000..672cb78e3088f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r0.dts"
> +#include "sc7280-herobrine-lte-sku.dtsi"
> +
> +/ {
> + model = "Google Villager (rev0) with LTE";
> + compatible = "google,villager-rev0-sku0", "qcom,sc7280";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> new file mode 100644
> index 0000000000000..2f05a19cc388e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Villager board device tree source
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +#include "sc7280-herobrine-villager-r1.dts"
You can't include this file because it doesn't exist upstream. It
wouldn't be hard for you to post a patch adding it, though. You could
make a 3-patch series. Patch #1 is the bindings, patch #2 adds
villager-r1, and patch #3 adds the LTE bits.
On 7.07.2022 01:51, Doug Anderson wrote:
> Hi,
>
> On Wed, Jul 6, 2022 at 5:31 AM Konrad Dybcio
> <[email protected]> wrote:
>>
>>
>>
>> On 5.07.2022 04:22, Jimmy Chen wrote:
>>> This adds LTE skus for villager device tree files.
>>>
>>> Signed-off-by: Jimmy Chen <[email protected]>
>>> ---
>>>
>>> arch/arm64/boot/dts/qcom/Makefile | 2 ++
>>> .../arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 11 -----------
>>> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 1 +
>>> .../dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
>>> .../boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 15 +++++++++++++++
>>> .../dts/qcom/sc7280-herobrine-villager-r0-lte.dts | 14 ++++++++++++++
>>> .../dts/qcom/sc7280-herobrine-villager-r1-lte.dts | 14 ++++++++++++++
>>> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 1 +
>>> 8 files changed, 48 insertions(+), 11 deletions(-)
>>> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0-lte.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index bb9f4eb3e65a0..6d81ff12f5af2 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0-lte.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>> index cfe2741456a1a..25f31c81b2b74 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
>>> @@ -83,17 +83,6 @@ spi_flash: flash@0 {
>>> };
>>> };
>>>
>>> -/* Modem setup is different on Chrome setups than typical Qualcomm setup */
>>> -&remoteproc_mpss {
>>> - status = "okay";
>>> - compatible = "qcom,sc7280-mss-pil";
>>> - iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
>>> - interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
>>> - memory-region = <&mba_mem>, <&mpss_mem>;
>>> - firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
>>> - "qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
>>> -};
>>> -
>>> &remoteproc_wpss {
>>> status = "okay";
>>> firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>>> index e9ca6c5d24a16..921eccfec39ae 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
>>> @@ -9,6 +9,7 @@
>>>
>>> #include "sc7280-herobrine.dtsi"
>>> #include "sc7280-herobrine-audio-wcd9385.dtsi"
>>> +#include "sc7280-herobrine-lte-sku.dtsi"
>>>
>>> / {
>>> model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
>>> index c1647a85a371a..c1a6719687252 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
>>> @@ -8,6 +8,7 @@
>>> /dts-v1/;
>>>
>>> #include "sc7280-herobrine.dtsi"
>>> +#include "sc7280-herobrine-lte-sku.dtsi"
>>>
>>> / {
>>> model = "Google Herobrine (rev1+)";
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> new file mode 100644
>>> index 0000000000000..a4809dd2f4e8a
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> @@ -0,0 +1,15 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Google Herobrine dts fragment for LTE SKUs
>>> + *
>>> + * Copyright 2022 Google LLC.
>>> + */
>>> +/* Modem setup is different on Chrome setups than typical Qualcomm setup */
>>> +&remoteproc_mpss {
>> Hi, just a minor nit.
>>
>> It was recently agreed upon that the status property should go last to
>> make things consistent with other DTs (qcom is - as usual - a special
>> snowflake :D). Could you please fix that up? The rest looks good.
>>
>> Konrad
>
> I'm not aware of this new convention. Can you please provide a link?
We've discussed it here [1], plus seemingly all other DTs (though I
did not in fact check *all* other DTs, just a few from different vendors'
subdirectories) seem to put it last, so I think we concluded that not
standing out makes sense.. The DT spec itself does not specify where
it should go, but this could possibly be a good addition to it..
Konrad
[1] https://www.spinics.net/lists/linux-arm-msm/msg115444.html
>
> -Doug