> -----Original Message-----
> From: Limonciello, Mario <[email protected]>
> Sent: Tuesday, December 15, 2020 3:30 AM
> To: Jeff Kirsher; Tony Nguyen; [email protected]
> Cc: [email protected]; Netdev; Alexander Duyck; Jakub Kicinski;
> Sasha Netfin; Aaron Brown; Stefan Assmann; David Miller;
> [email protected]; Shen, Yijun; Yuan, Perry;
> [email protected]; Hans de Goede; Limonciello, Mario
> Subject: [PATCH v5 4/4] e1000e: Export S0ix flags to ethtool
>
> This flag can be used by an end user to disable S0ix flows on a buggy system
> or by an OEM for development purposes.
>
> If you need this flag to be persisted across reboots, it's suggested to use a
> udev rule to call adjust it until the kernel could have your configuration in a
> disallow list.
>
> Signed-off-by: Mario Limonciello <[email protected]>
Verified this series patches with Dell Systems.
Tested-By: Yijun Shen <[email protected]>
> ---
> drivers/net/ethernet/intel/e1000e/e1000.h | 1 +
> drivers/net/ethernet/intel/e1000e/ethtool.c | 46 +++++++++++++++++++++
> drivers/net/ethernet/intel/e1000e/netdev.c | 9 ++--
> 3 files changed, 52 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h
> b/drivers/net/ethernet/intel/e1000e/e1000.h
> index ba7a0f8f6937..5b2143f4b1f8 100644
> --- a/drivers/net/ethernet/intel/e1000e/e1000.h
> +++ b/drivers/net/ethernet/intel/e1000e/e1000.h
> @@ -436,6 +436,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter
> *adapter, u32 *timinca);
> #define FLAG2_DFLT_CRC_STRIPPING BIT(12)
> #define FLAG2_CHECK_RX_HWTSTAMP BIT(13)
> #define FLAG2_CHECK_SYSTIM_OVERFLOW BIT(14)
> +#define FLAG2_ENABLE_S0IX_FLOWS BIT(15)
>
> #define E1000_RX_DESC_PS(R, i) \
> (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git
> a/drivers/net/ethernet/intel/e1000e/ethtool.c
> b/drivers/net/ethernet/intel/e1000e/ethtool.c
> index 03215b0aee4b..06442e6bef73 100644
> --- a/drivers/net/ethernet/intel/e1000e/ethtool.c
> +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
> @@ -23,6 +23,13 @@ struct e1000_stats {
> int stat_offset;
> };
>
> +static const char e1000e_priv_flags_strings[][ETH_GSTRING_LEN] = {
> +#define E1000E_PRIV_FLAGS_S0IX_ENABLED BIT(0)
> + "s0ix-enabled",
> +};
> +
> +#define E1000E_PRIV_FLAGS_STR_LEN
> ARRAY_SIZE(e1000e_priv_flags_strings)
> +
> #define E1000_STAT(str, m) { \
> .stat_string = str, \
> .type = E1000_STATS, \
> @@ -1776,6 +1783,8 @@ static int e1000e_get_sset_count(struct net_device
> __always_unused *netdev,
> return E1000_TEST_LEN;
> case ETH_SS_STATS:
> return E1000_STATS_LEN;
> + case ETH_SS_PRIV_FLAGS:
> + return E1000E_PRIV_FLAGS_STR_LEN;
> default:
> return -EOPNOTSUPP;
> }
> @@ -2097,6 +2106,10 @@ static void e1000_get_strings(struct net_device
> __always_unused *netdev,
> p += ETH_GSTRING_LEN;
> }
> break;
> + case ETH_SS_PRIV_FLAGS:
> + memcpy(data, e1000e_priv_flags_strings,
> + E1000E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
> + break;
> }
> }
>
> @@ -2305,6 +2318,37 @@ static int e1000e_get_ts_info(struct net_device
> *netdev,
> return 0;
> }
>
> +static u32 e1000e_get_priv_flags(struct net_device *netdev) {
> + struct e1000_adapter *adapter = netdev_priv(netdev);
> + u32 priv_flags = 0;
> +
> + if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
> + priv_flags |= E1000E_PRIV_FLAGS_S0IX_ENABLED;
> +
> + return priv_flags;
> +}
> +
> +static int e1000e_set_priv_flags(struct net_device *netdev, u32
> +priv_flags) {
> + struct e1000_adapter *adapter = netdev_priv(netdev);
> + unsigned int flags2 = adapter->flags2;
> +
> + flags2 &= ~FLAG2_ENABLE_S0IX_FLOWS;
> + if (priv_flags & E1000E_PRIV_FLAGS_S0IX_ENABLED) {
> + struct e1000_hw *hw = &adapter->hw;
> +
> + if (hw->mac.type < e1000_pch_cnp)
> + return -EINVAL;
> + flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
> + }
> +
> + if (flags2 != adapter->flags2)
> + adapter->flags2 = flags2;
> +
> + return 0;
> +}
> +
> static const struct ethtool_ops e1000_ethtool_ops = {
> .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
> .get_drvinfo = e1000_get_drvinfo,
> @@ -2336,6 +2380,8 @@ static const struct ethtool_ops e1000_ethtool_ops
> = {
> .set_eee = e1000e_set_eee,
> .get_link_ksettings = e1000_get_link_ksettings,
> .set_link_ksettings = e1000_set_link_ksettings,
> + .get_priv_flags = e1000e_get_priv_flags,
> + .set_priv_flags = e1000e_set_priv_flags,
> };
>
> void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git
> a/drivers/net/ethernet/intel/e1000e/netdev.c
> b/drivers/net/ethernet/intel/e1000e/netdev.c
> index b9800ba2006c..e9b82c209c2d 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -6923,7 +6923,6 @@ static __maybe_unused int
> e1000e_pm_suspend(struct device *dev)
> struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
> struct e1000_adapter *adapter = netdev_priv(netdev);
> struct pci_dev *pdev = to_pci_dev(dev);
> - struct e1000_hw *hw = &adapter->hw;
> int rc;
>
> e1000e_flush_lpic(pdev);
> @@ -6935,7 +6934,7 @@ static __maybe_unused int
> e1000e_pm_suspend(struct device *dev)
> e1000e_pm_thaw(dev);
> } else {
> /* Introduce S0ix implementation */
> - if (hw->mac.type >= e1000_pch_cnp)
> + if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
> e1000e_s0ix_entry_flow(adapter);
> }
>
> @@ -6947,11 +6946,10 @@ static __maybe_unused int
> e1000e_pm_resume(struct device *dev)
> struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
> struct e1000_adapter *adapter = netdev_priv(netdev);
> struct pci_dev *pdev = to_pci_dev(dev);
> - struct e1000_hw *hw = &adapter->hw;
> int rc;
>
> /* Introduce S0ix implementation */
> - if (hw->mac.type >= e1000_pch_cnp)
> + if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
> e1000e_s0ix_exit_flow(adapter);
>
> rc = __e1000_resume(pdev);
> @@ -7615,6 +7613,9 @@ static int e1000_probe(struct pci_dev *pdev, const
> struct pci_device_id *ent)
> if (!(adapter->flags & FLAG_HAS_AMT))
> e1000e_get_hw_control(adapter);
>
> + if (hw->mac.type >= e1000_pch_cnp)
> + adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
> +
> strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
> err = register_netdev(netdev);
> if (err)
> --
> 2.25.1