From: Khiem Nguyen <[email protected]>
The new PMIC BD9574MWF inherits features from BD9571MWV.
Add the support of new PMIC to existing bd9571mwv driver.
Signed-off-by: Khiem Nguyen <[email protected]>
Co-developed-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Yoshihiro Shimoda <[email protected]>
---
drivers/mfd/bd9571mwv.c | 83 +++++++++++++++++++++++++++++++++++++++++--
include/linux/mfd/bd9571mwv.h | 17 +++++++--
2 files changed, 95 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
index c905ab4..ab753a9 100644
--- a/drivers/mfd/bd9571mwv.c
+++ b/drivers/mfd/bd9571mwv.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * ROHM BD9571MWV-M MFD driver
+ * ROHM BD9571MWV-M and BD9574MVF-M core driver
*
* Copyright (C) 2017 Marek Vasut <[email protected]>
* Copyright (C) 2020 Renesas Electronics Corporation
@@ -11,6 +11,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-generic.h>
#include <linux/module.h>
#include <linux/mfd/bd9571mwv.h>
@@ -118,6 +119,79 @@ static const struct bd957x_ddata bd9571mwv_ddata = {
.num_cells = ARRAY_SIZE(bd9571mwv_cells),
};
+static const struct mfd_cell bd9574mwf_cells[] = {
+ { .name = "bd9574mwf-regulator", },
+ { .name = "bd9574mwf-gpio", },
+};
+
+static const struct regmap_range bd9574mwf_readable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION),
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
+ regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_SETVMAX),
+ regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_MONIVDAC),
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9574mwf_readable_table = {
+ .yes_ranges = bd9574mwf_readable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9574mwf_readable_yes_ranges),
+};
+
+static const struct regmap_range bd9574mwf_writable_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_BKUP_MODE_CNT, BD9571MWV_BKUP_MODE_CNT),
+ regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID),
+ regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT),
+ regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK),
+};
+
+static const struct regmap_access_table bd9574mwf_writable_table = {
+ .yes_ranges = bd9574mwf_writable_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9574mwf_writable_yes_ranges),
+};
+
+static const struct regmap_range bd9574mwf_volatile_yes_ranges[] = {
+ regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC),
+ regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
+ regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
+ regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
+};
+
+static const struct regmap_access_table bd9574mwf_volatile_table = {
+ .yes_ranges = bd9574mwf_volatile_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9574mwf_volatile_yes_ranges),
+};
+
+static const struct regmap_config bd9574mwf_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &bd9574mwf_readable_table,
+ .wr_table = &bd9574mwf_writable_table,
+ .volatile_table = &bd9574mwf_volatile_table,
+ .max_register = 0xff,
+};
+
+static struct regmap_irq_chip bd9574mwf_irq_chip = {
+ .name = "bd9574mwf",
+ .status_base = BD9571MWV_INT_INTREQ,
+ .mask_base = BD9571MWV_INT_INTMASK,
+ .ack_base = BD9571MWV_INT_INTREQ,
+ .init_ack_masked = true,
+ .num_regs = 1,
+ .irqs = bd9571mwv_irqs,
+ .num_irqs = ARRAY_SIZE(bd9571mwv_irqs),
+};
+
+static const struct bd957x_ddata bd9574mwf_ddata = {
+ .regmap_config = &bd9574mwf_regmap_config,
+ .irq_chip = &bd9574mwf_irq_chip,
+ .cells = bd9574mwf_cells,
+ .num_cells = ARRAY_SIZE(bd9574mwf_cells),
+};
+
static int bd957x_identify(struct device *dev, struct regmap *regmap)
{
unsigned int value;
@@ -171,6 +245,9 @@ static int bd9571mwv_probe(struct i2c_client *client,
case BD9571MWV_PRODUCT_CODE_BD9571MWV:
ddata = &bd9571mwv_ddata;
break;
+ case BD9571MWV_PRODUCT_CODE_BD9574MWF:
+ ddata = &bd9574mwf_ddata;
+ break;
default:
dev_err(dev, "Unsupported device 0x%x\n", ret);
return -ENODEV;
@@ -200,12 +277,14 @@ static int bd9571mwv_probe(struct i2c_client *client,
static const struct of_device_id bd9571mwv_of_match_table[] = {
{ .compatible = "rohm,bd9571mwv", },
+ { .compatible = "rohm,bd9574mwf", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
static const struct i2c_device_id bd9571mwv_id_table[] = {
- { "bd9571mwv", 0 },
+ { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
+ { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table);
diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h
index e1716ec..8efd99d 100644
--- a/include/linux/mfd/bd9571mwv.h
+++ b/include/linux/mfd/bd9571mwv.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * ROHM BD9571MWV-M driver
+ * ROHM BD9571MWV-M and BD9574MWF-M driver
*
* Copyright (C) 2017 Marek Vasut <[email protected]>
* Copyright (C) 2020 Renesas Electronics Corporation
@@ -14,11 +14,12 @@
#include <linux/device.h>
#include <linux/regmap.h>
-/* List of registers for BD9571MWV */
+/* List of registers for BD9571MWV and BD9574MWF */
#define BD9571MWV_VENDOR_CODE 0x00
#define BD9571MWV_VENDOR_CODE_VAL 0xdb
#define BD9571MWV_PRODUCT_CODE 0x01
#define BD9571MWV_PRODUCT_CODE_BD9571MWV 0x60
+#define BD9571MWV_PRODUCT_CODE_BD9574MWF 0x74
#define BD9571MWV_PRODUCT_REVISION 0x02
#define BD9571MWV_I2C_FUSA_MODE 0x10
@@ -48,6 +49,7 @@
#define BD9571MWV_VD33_VID 0x44
#define BD9571MWV_DVFS_VINIT 0x50
+#define BD9574MWF_VD09_VINIT 0x51
#define BD9571MWV_DVFS_SETVMAX 0x52
#define BD9571MWV_DVFS_BOOSTVID 0x53
#define BD9571MWV_DVFS_SETVID 0x54
@@ -61,6 +63,7 @@
#define BD9571MWV_GPIO_INT_SET 0x64
#define BD9571MWV_GPIO_INT 0x65
#define BD9571MWV_GPIO_INTMASK 0x66
+#define BD9574MWF_GPIO_MUX 0x67
#define BD9571MWV_REG_KEEP(n) (0x70 + (n))
@@ -70,6 +73,8 @@
#define BD9571MWV_PROT_ERROR_STATUS2 0x83
#define BD9571MWV_PROT_ERROR_STATUS3 0x84
#define BD9571MWV_PROT_ERROR_STATUS4 0x85
+#define BD9574MWF_PROT_ERROR_STATUS5 0x86
+#define BD9574MWF_SYSTEM_ERROR_STATUS 0x87
#define BD9571MWV_INT_INTREQ 0x90
#define BD9571MWV_INT_INTREQ_MD1_INT BIT(0)
@@ -82,6 +87,12 @@
#define BD9571MWV_INT_INTREQ_BKUP_TRG_INT BIT(7)
#define BD9571MWV_INT_INTMASK 0x91
+#define BD9574MWF_SSCG_CNT 0xA0
+#define BD9574MWF_POFFB_MRB 0xA1
+#define BD9574MWF_SMRB_WR_PROT 0xA2
+#define BD9574MWF_SMRB_ASSERT 0xA3
+#define BD9574MWF_SMRB_STATUS 0xA4
+
#define BD9571MWV_ACCESS_KEY 0xff
/* Define the BD9571MWV IRQ numbers */
@@ -91,7 +102,7 @@ enum bd9571mwv_irqs {
BD9571MWV_IRQ_MD2_E2,
BD9571MWV_IRQ_PROT_ERR,
BD9571MWV_IRQ_GP,
- BD9571MWV_IRQ_128H_OF,
+ BD9571MWV_IRQ_128H_OF, /* BKUP_HOLD on BD9574MWF */
BD9571MWV_IRQ_WDT_OF,
BD9571MWV_IRQ_BKUP_TRG,
};
--
2.7.4
Hi Shimoda-san,
On Mon, Dec 21, 2020 at 3:56 AM Yoshihiro Shimoda
<[email protected]> wrote:
> From: Khiem Nguyen <[email protected]>
>
> The new PMIC BD9574MWF inherits features from BD9571MWV.
> Add the support of new PMIC to existing bd9571mwv driver.
>
> Signed-off-by: Khiem Nguyen <[email protected]>
> Co-developed-by: Yoshihiro Shimoda <[email protected]>
> Signed-off-by: Yoshihiro Shimoda <[email protected]>
Thanks for your patch!
> --- a/drivers/mfd/bd9571mwv.c
> +++ b/drivers/mfd/bd9571mwv.c
> @@ -200,12 +277,14 @@ static int bd9571mwv_probe(struct i2c_client *client,
>
> static const struct of_device_id bd9571mwv_of_match_table[] = {
> { .compatible = "rohm,bd9571mwv", },
> + { .compatible = "rohm,bd9574mwf", },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
>
> static const struct i2c_device_id bd9571mwv_id_table[] = {
> - { "bd9571mwv", 0 },
> + { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
> + { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
Why add the chip types? These are unused, and the driver uses
autodetection of the chip variant anyway.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert-san,
Thank you for your review!
> From: Geert Uytterhoeven, Sent: Tuesday, December 22, 2020 5:53 PM
> On Mon, Dec 21, 2020 at 3:56 AM Yoshihiro Shimoda
> <[email protected]> wrote:
<snip>
> > --- a/drivers/mfd/bd9571mwv.c
> > +++ b/drivers/mfd/bd9571mwv.c
>
> > @@ -200,12 +277,14 @@ static int bd9571mwv_probe(struct i2c_client *client,
> >
> > static const struct of_device_id bd9571mwv_of_match_table[] = {
> > { .compatible = "rohm,bd9571mwv", },
> > + { .compatible = "rohm,bd9574mwf", },
> > { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
> >
> > static const struct i2c_device_id bd9571mwv_id_table[] = {
> > - { "bd9571mwv", 0 },
> > + { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
> > + { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
>
> Why add the chip types? These are unused, and the driver uses
> autodetection of the chip variant anyway.
I just added the chip types in the future use. As you said,
these are unused and we should not add a future use in general.
So, I'll remove this change.
Also, I think I should remove the following patch.
[PATCH v4 08/12] gpio: bd9571mwv: Add BD9574MWF support
Best regards,
Yoshihiro Shimoda
Hi Shimoda-san,
On Tue, Dec 22, 2020 at 10:23 AM Yoshihiro Shimoda
<[email protected]> wrote:
> > From: Geert Uytterhoeven, Sent: Tuesday, December 22, 2020 5:53 PM
> > On Mon, Dec 21, 2020 at 3:56 AM Yoshihiro Shimoda
> > <[email protected]> wrote:
> <snip>
> > > --- a/drivers/mfd/bd9571mwv.c
> > > +++ b/drivers/mfd/bd9571mwv.c
> >
> > > @@ -200,12 +277,14 @@ static int bd9571mwv_probe(struct i2c_client *client,
> > >
> > > static const struct of_device_id bd9571mwv_of_match_table[] = {
> > > { .compatible = "rohm,bd9571mwv", },
> > > + { .compatible = "rohm,bd9574mwf", },
> > > { /* sentinel */ }
> > > };
> > > MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
> > >
> > > static const struct i2c_device_id bd9571mwv_id_table[] = {
> > > - { "bd9571mwv", 0 },
> > > + { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
> > > + { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
> >
> > Why add the chip types? These are unused, and the driver uses
> > autodetection of the chip variant anyway.
>
> I just added the chip types in the future use. As you said,
> these are unused and we should not add a future use in general.
> So, I'll remove this change.
OK.
> Also, I think I should remove the following patch.
>
> [PATCH v4 08/12] gpio: bd9571mwv: Add BD9574MWF support
You mean removing the chip types from bd9571mwv_gpio_id_table[]?
You still need the "bd9574mwf-gpio" entry, don't you?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Tue, 2020-12-22 at 09:23 +0000, Yoshihiro Shimoda wrote:
> Hi Geert-san,
>
> Thank you for your review!
>
> > From: Geert Uytterhoeven, Sent: Tuesday, December 22, 2020 5:53 PM
> > On Mon, Dec 21, 2020 at 3:56 AM Yoshihiro Shimoda
> > <[email protected]> wrote:
> <snip>
> > > --- a/drivers/mfd/bd9571mwv.c
> > > +++ b/drivers/mfd/bd9571mwv.c
> > > @@ -200,12 +277,14 @@ static int bd9571mwv_probe(struct
> > > i2c_client *client,
> > >
> > > static const struct of_device_id bd9571mwv_of_match_table[] = {
> > > { .compatible = "rohm,bd9571mwv", },
> > > + { .compatible = "rohm,bd9574mwf", },
> > > { /* sentinel */ }
> > > };
> > > MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table);
> > >
> > > static const struct i2c_device_id bd9571mwv_id_table[] = {
> > > - { "bd9571mwv", 0 },
> > > + { "bd9571mwv", ROHM_CHIP_TYPE_BD9571 },
> > > + { "bd9574mwf", ROHM_CHIP_TYPE_BD9574 },
> >
> > Why add the chip types? These are unused, and the driver uses
> > autodetection of the chip variant anyway.
>
> I just added the chip types in the future use. As you said,
> these are unused and we should not add a future use in general.
> So, I'll remove this change.
>
> Also, I think I should remove the following patch.
>
> [PATCH v4 08/12] gpio: bd9571mwv: Add BD9574MWF support
I think this depends on whether you wish to add support for the
> "RECOV_GPOUT", "FREQSEL" and "RTC_IN",
which you mention in GPIO commit message. If you plan on adding the
support, then you need to differentiate the ICs on GPIO driver, right?
Best Regards
Matti Vaittinen
Hi Geert-san,
> From: Geert Uytterhoeven, Sent: Tuesday, December 22, 2020 6:32 PM
<snip>
> > Also, I think I should remove the following patch.
> >
> > [PATCH v4 08/12] gpio: bd9571mwv: Add BD9574MWF support
>
> You mean removing the chip types from bd9571mwv_gpio_id_table[]?
> You still need the "bd9574mwf-gpio" entry, don't you?
You're correct. The MFD driver uses "bd9574mwf-gpio". And,
"bd9574mwf-gpio" with 0 is not good. So, I'll keep this patch.
Thank you for the point it out.
Best regards,
Yoshihiro Shimoda
Hi Matti-san,
> From: Vaittinen, Matti, Sent: Tuesday, December 22, 2020 6:39 PM
<snip>
> > Also, I think I should remove the following patch.
> >
> > [PATCH v4 08/12] gpio: bd9571mwv: Add BD9574MWF support
>
> I think this depends on whether you wish to add support for the
>
> > "RECOV_GPOUT", "FREQSEL" and "RTC_IN",
>
> which you mention in GPIO commit message. If you plan on adding the
> support, then you need to differentiate the ICs on GPIO driver, right?
Thank you for the reply.
As I replied to Geert-san, at least this MFD driver uses "bd9574mwf-gpio"
for probing. So, I'll keep that patch as-is.
Best regards,
Yoshihiro Shimoda