Hi Masaki,
The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm after
system suspend (S3).
Commit "HID: i2c-hid: Don't reset device upon system resume” which solves
the same issue for other vendors, cause the issue on Alps touchpad.
So I’d like to know the correct command Alps touchpad expects after system
resume.
Also Cc Mario because this could relate to BIOS.
Kai-Heng
Hi, Kai-Heng,
Sorry, I'm not in charge of Linux task now.
Hi, XiaoJian,
Please check the following mail.
If you have any question, please ask Kai-Heng.
Best Regards,
Masaki Ota
-----Original Message-----
From: Kai-Heng Feng <[email protected]>
Sent: Wednesday, August 28, 2019 3:22 PM
To: 太田 真喜 Masaki Ota <[email protected]>
Cc: Mario Limonciello <[email protected]>; open list:HID CORE LAYER <[email protected]>; Linux Kernel Mailing List <[email protected]>
Subject: Alps touchpad generates IRQ storm after S3
Hi Masaki,
The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm after system suspend (S3).
Commit "HID: i2c-hid: Don't reset device upon system resume” which solves the same issue for other vendors, cause the issue on Alps touchpad.
So I’d like to know the correct command Alps touchpad expects after system resume.
Also Cc Mario because this could relate to BIOS.
Kai-Heng
Hi Ota-san,
OK, we will look into it.
Hi Kai-Heng,
We will try to reproduce this issue first, could you please tell me the target Ubuntu version?
Best regards,
Jason
-----Original Message-----
From: 太田 真喜 Masaki Ota <[email protected]>
Sent: Wednesday, August 28, 2019 2:35 PM
To: 曹 曉建 Xiaojian Cao <[email protected]>; Kai-Heng Feng <[email protected]>
Cc: Mario Limonciello <[email protected]>; open list:HID CORE LAYER <[email protected]>; Linux Kernel Mailing List <[email protected]>; 斉藤 直樹 Naoki Saito <[email protected]>
Subject: RE: Alps touchpad generates IRQ storm after S3
Hi, Kai-Heng,
Sorry, I'm not in charge of Linux task now.
Hi, XiaoJian,
Please check the following mail.
If you have any question, please ask Kai-Heng.
Best Regards,
Masaki Ota
-----Original Message-----
From: Kai-Heng Feng <[email protected]>
Sent: Wednesday, August 28, 2019 3:22 PM
To: 太田 真喜 Masaki Ota <[email protected]>
Cc: Mario Limonciello <[email protected]>; open list:HID CORE LAYER <[email protected]>; Linux Kernel Mailing List <[email protected]>
Subject: Alps touchpad generates IRQ storm after S3
Hi Masaki,
The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm after system suspend (S3).
Commit "HID: i2c-hid: Don't reset device upon system resume” which solves the same issue for other vendors, cause the issue on Alps touchpad.
So I’d like to know the correct command Alps touchpad expects after system resume.
Also Cc Mario because this could relate to BIOS.
Kai-Heng
Hi Xiaojian,
at 14:51, Xiaojian Cao <[email protected]> wrote:
> Hi Ota-san,
>
> OK, we will look into it.
>
>
> Hi Kai-Heng,
>
> We will try to reproduce this issue first, could you please tell me the
> target Ubuntu version?
It’s distro-agnostic, any distro with mainline Linux can reproduce the issue.
Kai-Heng
>
> Best regards,
> Jason
>
> -----Original Message-----
> From: 太田 真喜 Masaki Ota <[email protected]>
> Sent: Wednesday, August 28, 2019 2:35 PM
> To: 曹 曉建 Xiaojian Cao <[email protected]>; Kai-Heng Feng
> <[email protected]>
> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
> LAYER <[email protected]>; Linux Kernel Mailing List
> <[email protected]>; 斉藤 直樹 Naoki Saito
> <[email protected]>
> Subject: RE: Alps touchpad generates IRQ storm after S3
>
> Hi, Kai-Heng,
>
> Sorry, I'm not in charge of Linux task now.
>
> Hi, XiaoJian,
>
> Please check the following mail.
> If you have any question, please ask Kai-Heng.
>
> Best Regards,
> Masaki Ota
> -----Original Message-----
> From: Kai-Heng Feng <[email protected]>
> Sent: Wednesday, August 28, 2019 3:22 PM
> To: 太田 真喜 Masaki Ota <[email protected]>
> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
> LAYER <[email protected]>; Linux Kernel Mailing List
> <[email protected]>
> Subject: Alps touchpad generates IRQ storm after S3
>
> Hi Masaki,
>
> The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm
> after system suspend (S3).
> Commit "HID: i2c-hid: Don't reset device upon system resume” which solves
> the same issue for other vendors, cause the issue on Alps touchpad.
> So I’d like to know the correct command Alps touchpad expects after
> system resume.
>
> Also Cc Mario because this could relate to BIOS.
>
> Kai-Heng
KH,
Just make sure I understand details.
> Commit "HID: i2c-hid: Don't reset device upon system resume
If you revert this it's fixed on this system?
In that commit you had mentioned if this causes problems it might be worth
quirking just Raydium but commit afbb1169ed5b58cfca017e368b53e019cf285853
confirmed that it helped several other systems too.
If the conclusion from this investigation this is only fixable via touchpad FW update
it might be worth quirking this touchpad/touchpad FW/system combination.
> Also Cc Mario because this could relate to BIOS.
Also I assume this is on current stable BIOS/EC release, right?
Thanks,
> -----Original Message-----
> From: Kai-Heng Feng <[email protected]>
> Sent: Wednesday, August 28, 2019 1:58 AM
> To: Xiaojian Cao
> Cc: Masaki Ota; Limonciello, Mario; open list:HID CORE LAYER; Linux Kernel
> Mailing List; Naoki Saito
> Subject: Re: Alps touchpad generates IRQ storm after S3
>
>
> [EXTERNAL EMAIL]
>
> Hi Xiaojian,
>
> at 14:51, Xiaojian Cao <[email protected]> wrote:
>
> > Hi Ota-san,
> >
> > OK, we will look into it.
> >
> >
> > Hi Kai-Heng,
> >
> > We will try to reproduce this issue first, could you please tell me the
> > target Ubuntu version?
>
> It’s distro-agnostic, any distro with mainline Linux can reproduce the issue.
>
> Kai-Heng
>
> >
> > Best regards,
> > Jason
> >
> > -----Original Message-----
> > From: 太田 真喜 Masaki Ota <[email protected]>
> > Sent: Wednesday, August 28, 2019 2:35 PM
> > To: 曹 曉建 Xiaojian Cao <[email protected]>; Kai-Heng Feng
> > <[email protected]>
> > Cc: Mario Limonciello <[email protected]>; open list:HID CORE
> > LAYER <[email protected]>; Linux Kernel Mailing List
> > <[email protected]>; 斉藤 直樹 Naoki Saito
> > <[email protected]>
> > Subject: RE: Alps touchpad generates IRQ storm after S3
> >
> > Hi, Kai-Heng,
> >
> > Sorry, I'm not in charge of Linux task now.
> >
> > Hi, XiaoJian,
> >
> > Please check the following mail.
> > If you have any question, please ask Kai-Heng.
> >
> > Best Regards,
> > Masaki Ota
> > -----Original Message-----
> > From: Kai-Heng Feng <[email protected]>
> > Sent: Wednesday, August 28, 2019 3:22 PM
> > To: 太田 真喜 Masaki Ota <[email protected]>
> > Cc: Mario Limonciello <[email protected]>; open list:HID CORE
> > LAYER <[email protected]>; Linux Kernel Mailing List
> > <[email protected]>
> > Subject: Alps touchpad generates IRQ storm after S3
> >
> > Hi Masaki,
> >
> > The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm
> > after system suspend (S3).
> > Commit "HID: i2c-hid: Don't reset device upon system resume” which solves
> > the same issue for other vendors, cause the issue on Alps touchpad.
> > So I’d like to know the correct command Alps touchpad expects after
> > system resume.
> >
> > Also Cc Mario because this could relate to BIOS.
> >
> > Kai-Heng
>
Hi Mario,
at 21:25, <[email protected]> <[email protected]> wrote:
> KH,
>
> Just make sure I understand details.
>
>> Commit "HID: i2c-hid: Don't reset device upon system resume
>
> If you revert this it's fixed on this system?
Yes. Once reset is used instead of the issue is gone.
>
> In that commit you had mentioned if this causes problems it might be worth
> quirking just Raydium but commit afbb1169ed5b58cfca017e368b53e019cf285853
> confirmed that it helped several other systems too.
>
> If the conclusion from this investigation this is only fixable via
> touchpad FW update
> it might be worth quirking this touchpad/touchpad FW/system combination.
Hopefully there’s a better solution from ALPS :)
>
>> Also Cc Mario because this could relate to BIOS.
>
> Also I assume this is on current stable BIOS/EC release, right?
Yes. The BIOS version is 1.10.1.
The IRQ storm stops as soon as the touchpad gets touched.
Kai-Heng
>
> Thanks,
>
>> -----Original Message-----
>> From: Kai-Heng Feng <[email protected]>
>> Sent: Wednesday, August 28, 2019 1:58 AM
>> To: Xiaojian Cao
>> Cc: Masaki Ota; Limonciello, Mario; open list:HID CORE LAYER; Linux Kernel
>> Mailing List; Naoki Saito
>> Subject: Re: Alps touchpad generates IRQ storm after S3
>>
>>
>> [EXTERNAL EMAIL]
>>
>> Hi Xiaojian,
>>
>> at 14:51, Xiaojian Cao <[email protected]> wrote:
>>
>>> Hi Ota-san,
>>>
>>> OK, we will look into it.
>>>
>>>
>>> Hi Kai-Heng,
>>>
>>> We will try to reproduce this issue first, could you please tell me the
>>> target Ubuntu version?
>>
>> It’s distro-agnostic, any distro with mainline Linux can reproduce the
>> issue.
>>
>> Kai-Heng
>>
>>> Best regards,
>>> Jason
>>>
>>> -----Original Message-----
>>> From: 太田 真喜 Masaki Ota <[email protected]>
>>> Sent: Wednesday, August 28, 2019 2:35 PM
>>> To: 曹 曉建 Xiaojian Cao <[email protected]>; Kai-Heng Feng
>>> <[email protected]>
>>> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
>>> LAYER <[email protected]>; Linux Kernel Mailing List
>>> <[email protected]>; 斉藤 直樹 Naoki Saito
>>> <[email protected]>
>>> Subject: RE: Alps touchpad generates IRQ storm after S3
>>>
>>> Hi, Kai-Heng,
>>>
>>> Sorry, I'm not in charge of Linux task now.
>>>
>>> Hi, XiaoJian,
>>>
>>> Please check the following mail.
>>> If you have any question, please ask Kai-Heng.
>>>
>>> Best Regards,
>>> Masaki Ota
>>> -----Original Message-----
>>> From: Kai-Heng Feng <[email protected]>
>>> Sent: Wednesday, August 28, 2019 3:22 PM
>>> To: 太田 真喜 Masaki Ota <[email protected]>
>>> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
>>> LAYER <[email protected]>; Linux Kernel Mailing List
>>> <[email protected]>
>>> Subject: Alps touchpad generates IRQ storm after S3
>>>
>>> Hi Masaki,
>>>
>>> The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm
>>> after system suspend (S3).
>>> Commit "HID: i2c-hid: Don't reset device upon system resume” which solves
>>> the same issue for other vendors, cause the issue on Alps touchpad.
>>> So I’d like to know the correct command Alps touchpad expects after
>>> system resume.
>>>
>>> Also Cc Mario because this could relate to BIOS.
>>>
>>> Kai-Heng
Hi Xiaojian,
> On Aug 28, 2019, at 22:43, Kai-Heng Feng <[email protected]> wrote:
>
> Hi Mario,
>
> at 21:25, <[email protected]> <[email protected]> wrote:
>
>> KH,
>>
>> Just make sure I understand details.
>>
>>> Commit "HID: i2c-hid: Don't reset device upon system resume
>>
>> If you revert this it's fixed on this system?
>
> Yes. Once reset is used instead of the issue is gone.
Do you figure out the correct command to use here?
Kai-Heng
>
>>
>> In that commit you had mentioned if this causes problems it might be worth
>> quirking just Raydium but commit afbb1169ed5b58cfca017e368b53e019cf285853
>> confirmed that it helped several other systems too.
>>
>> If the conclusion from this investigation this is only fixable via touchpad FW update
>> it might be worth quirking this touchpad/touchpad FW/system combination.
>
> Hopefully there’s a better solution from ALPS :)
>
>>
>>> Also Cc Mario because this could relate to BIOS.
>>
>> Also I assume this is on current stable BIOS/EC release, right?
>
> Yes. The BIOS version is 1.10.1.
>
> The IRQ storm stops as soon as the touchpad gets touched.
>
> Kai-Heng
>
>>
>> Thanks,
>>
>>> -----Original Message-----
>>> From: Kai-Heng Feng <[email protected]>
>>> Sent: Wednesday, August 28, 2019 1:58 AM
>>> To: Xiaojian Cao
>>> Cc: Masaki Ota; Limonciello, Mario; open list:HID CORE LAYER; Linux Kernel
>>> Mailing List; Naoki Saito
>>> Subject: Re: Alps touchpad generates IRQ storm after S3
>>>
>>>
>>> [EXTERNAL EMAIL]
>>>
>>> Hi Xiaojian,
>>>
>>> at 14:51, Xiaojian Cao <[email protected]> wrote:
>>>
>>>> Hi Ota-san,
>>>>
>>>> OK, we will look into it.
>>>>
>>>>
>>>> Hi Kai-Heng,
>>>>
>>>> We will try to reproduce this issue first, could you please tell me the
>>>> target Ubuntu version?
>>>
>>> It’s distro-agnostic, any distro with mainline Linux can reproduce the issue.
>>>
>>> Kai-Heng
>>>
>>>> Best regards,
>>>> Jason
>>>>
>>>> -----Original Message-----
>>>> From: 太田 真喜 Masaki Ota <[email protected]>
>>>> Sent: Wednesday, August 28, 2019 2:35 PM
>>>> To: 曹 曉建 Xiaojian Cao <[email protected]>; Kai-Heng Feng
>>>> <[email protected]>
>>>> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
>>>> LAYER <[email protected]>; Linux Kernel Mailing List
>>>> <[email protected]>; 斉藤 直樹 Naoki Saito
>>>> <[email protected]>
>>>> Subject: RE: Alps touchpad generates IRQ storm after S3
>>>>
>>>> Hi, Kai-Heng,
>>>>
>>>> Sorry, I'm not in charge of Linux task now.
>>>>
>>>> Hi, XiaoJian,
>>>>
>>>> Please check the following mail.
>>>> If you have any question, please ask Kai-Heng.
>>>>
>>>> Best Regards,
>>>> Masaki Ota
>>>> -----Original Message-----
>>>> From: Kai-Heng Feng <[email protected]>
>>>> Sent: Wednesday, August 28, 2019 3:22 PM
>>>> To: 太田 真喜 Masaki Ota <[email protected]>
>>>> Cc: Mario Limonciello <[email protected]>; open list:HID CORE
>>>> LAYER <[email protected]>; Linux Kernel Mailing List
>>>> <[email protected]>
>>>> Subject: Alps touchpad generates IRQ storm after S3
>>>>
>>>> Hi Masaki,
>>>>
>>>> The Alps touchpad (044E:1220) on Dell Precision 7530 causes IRQ storm
>>>> after system suspend (S3).
>>>> Commit "HID: i2c-hid: Don't reset device upon system resume” which solves
>>>> the same issue for other vendors, cause the issue on Alps touchpad.
>>>> So I’d like to know the correct command Alps touchpad expects after
>>>> system resume.
>>>>
>>>> Also Cc Mario because this could relate to BIOS.
>>>>
>>>> Kai-Heng
>
>