On 1/30/2020 10:45 PM, Andr? Draszik wrote:
> At the moment, enabling this driver without the SNVS RTC driver
> being active will hang the kernel as soon as the power button
> is pressed.
>
> The reason is that in that case the SNVS isn't enabled, and
> any attempt to read the SNVS registers will simply hang forever.
>
> Ensure the clock is enabled (during the interrupt handler) to
> make this driver work.
>
> Also see commit 7f8993995410 ("drivers/rtc/rtc-snvs: add clock support")
> and commit edb190cb1734
> ("rtc: snvs: make sure clock is enabled for interrupt handle")
> for similar updates to the snvs rtc driver.
>
> Signed-off-by: Andr? Draszik <[email protected]>
> Cc: Anson Huang <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: "Horia Geant?" <[email protected]>
> Cc: Aymen Sghaier <[email protected]>
> Cc: Herbert Xu <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> ---
> drivers/input/keyboard/snvs_pwrkey.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
> index 2f5e3ab5ed63..c29711d8735c 100644
> --- a/drivers/input/keyboard/snvs_pwrkey.c
> +++ b/drivers/input/keyboard/snvs_pwrkey.c
> @@ -16,6 +16,7 @@
> #include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/pm_wakeirq.h>
> +#include <linux/clk.h>
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
>
> @@ -38,6 +39,7 @@ struct pwrkey_drv_data {
> int wakeup;
> struct timer_list check_timer;
> struct input_dev *input;
> + struct clk *clk;
> u8 minor_rev;
> };
>
> @@ -72,6 +74,9 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
> struct input_dev *input = pdata->input;
> u32 lp_status;
>
> + if (pdata->clk)
> + clk_enable(pdata->clk);
> +
clk framework handles NULL pointers internally, the check is redundant.
> pm_wakeup_event(input->dev.parent, 0);
>
> regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> @@ -96,6 +101,9 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
> /* clear SPO status */
> regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
>
> + if (pdata->clk)
> + clk_disable(pdata->clk);
> +
> return IRQ_HANDLED;
> }
>
> @@ -140,6 +148,25 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
> if (pdata->irq < 0)
> return -EINVAL;
>
> + pdata->clk = devm_clk_get(&pdev->dev, "snvs-pwrkey");
> + if (IS_ERR(pdata->clk)) {
> + pdata->clk = NULL;
Using devm_clk_get_optional() would simplify error handling.
> + } else {
> + error = clk_prepare_enable(pdata->clk);
> + if (error) {
> + dev_err(&pdev->dev,
> + "Could not prepare or enable the snvs clock\n");
> + return error;
> + }
> + error = devm_add_action_or_reset(&pdev->dev,
> + (void(*)(void *))clk_disable_unprepare,
> + pdata->clk);
> + if (error) {
> + dev_err(&pdev->dev, "failed to add reset action on 'snvs-pwrkey'");
> + return error;
> + }
> + }
> +
> regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
> pdata->minor_rev = vid & 0xff;
>
>