IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
staged access model in order to increase the address space.
This patch adds support for C45 MDIO read and write accesses, which are
used whenever the MII_ADDR_C45 flag in the regnum argument is set.
In case it is not set, C22 accesses are used as before.
Signed-off-by: Marco Hartmann <[email protected]>
---
Changes in v2:
- use bool variable is_c45
- add missing goto statements
---
---
drivers/net/ethernet/freescale/fec_main.c | 70 ++++++++++++++++++++++++++++---
1 file changed, 64 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c01d3ec3e9af..cb3ce27fb27a 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -208,8 +208,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
/* FEC MII MMFR bits definition */
#define FEC_MMFR_ST (1 << 30)
+#define FEC_MMFR_ST_C45 (0)
#define FEC_MMFR_OP_READ (2 << 28)
+#define FEC_MMFR_OP_READ_C45 (3 << 28)
#define FEC_MMFR_OP_WRITE (1 << 28)
+#define FEC_MMFR_OP_ADDR_WRITE (0)
#define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
#define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
#define FEC_MMFR_TA (2 << 16)
@@ -1767,7 +1770,8 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct fec_enet_private *fep = bus->priv;
struct device *dev = &fep->pdev->dev;
unsigned long time_left;
- int ret = 0;
+ int ret = 0, frame_start, frame_addr, frame_op;
+ bool is_c45 = !!(regnum & MII_ADDR_C45);
ret = pm_runtime_get_sync(dev);
if (ret < 0)
@@ -1775,9 +1779,37 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
reinit_completion(&fep->mdio_done);
+ if (is_c45) {
+ frame_start = FEC_MMFR_ST_C45;
+
+ /* write address */
+ frame_addr = (regnum >> 16);
+ writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+ FEC_MMFR_TA | (regnum & 0xFFFF),
+ fep->hwp + FEC_MII_DATA);
+
+ /* wait for end of transfer */
+ time_left = wait_for_completion_timeout(&fep->mdio_done,
+ usecs_to_jiffies(FEC_MII_TIMEOUT));
+ if (time_left == 0) {
+ netdev_err(fep->netdev, "MDIO address write timeout\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ frame_op = FEC_MMFR_OP_READ_C45;
+
+ } else {
+ /* C22 read */
+ frame_op = FEC_MMFR_OP_READ;
+ frame_start = FEC_MMFR_ST;
+ frame_addr = regnum;
+ }
+
/* start a read op */
- writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
- FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+ writel(frame_start | frame_op |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
/* wait for end of transfer */
@@ -1804,7 +1836,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
struct fec_enet_private *fep = bus->priv;
struct device *dev = &fep->pdev->dev;
unsigned long time_left;
- int ret;
+ int ret, frame_start, frame_addr;
+ bool is_c45 = !!(regnum & MII_ADDR_C45);
ret = pm_runtime_get_sync(dev);
if (ret < 0)
@@ -1814,9 +1847,33 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
reinit_completion(&fep->mdio_done);
+ if (is_c45) {
+ frame_start = FEC_MMFR_ST_C45;
+
+ /* write address */
+ frame_addr = (regnum >> 16);
+ writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+ FEC_MMFR_TA | (regnum & 0xFFFF),
+ fep->hwp + FEC_MII_DATA);
+
+ /* wait for end of transfer */
+ time_left = wait_for_completion_timeout(&fep->mdio_done,
+ usecs_to_jiffies(FEC_MII_TIMEOUT));
+ if (time_left == 0) {
+ netdev_err(fep->netdev, "MDIO address write timeout\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ } else {
+ /* C22 write */
+ frame_start = FEC_MMFR_ST;
+ frame_addr = regnum;
+ }
+
/* start a write op */
- writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
- FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+ writel(frame_start | FEC_MMFR_OP_WRITE |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
FEC_MMFR_TA | FEC_MMFR_DATA(value),
fep->hwp + FEC_MII_DATA);
@@ -1828,6 +1885,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
ret = -ETIMEDOUT;
}
+out:
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
--
2.7.4
From: Marco Hartman Sent: Wednesday, August 21, 2019 7:44 PM
> IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
> staged access model in order to increase the address space.
>
> This patch adds support for C45 MDIO read and write accesses, which are
> used whenever the MII_ADDR_C45 flag in the regnum argument is set.
> In case it is not set, C22 accesses are used as before.
>
> Signed-off-by: Marco Hartmann <[email protected]>
Acked-by: Fugang Duan <[email protected]>
> ---
> Changes in v2:
> - use bool variable is_c45
> - add missing goto statements
> ---
> ---
> drivers/net/ethernet/freescale/fec_main.c | 70
> ++++++++++++++++++++++++++++---
> 1 file changed, 64 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index c01d3ec3e9af..cb3ce27fb27a 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -208,8 +208,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet
> MAC address");
>
> /* FEC MII MMFR bits definition */
> #define FEC_MMFR_ST (1 << 30)
> +#define FEC_MMFR_ST_C45 (0)
> #define FEC_MMFR_OP_READ (2 << 28)
> +#define FEC_MMFR_OP_READ_C45 (3 << 28)
> #define FEC_MMFR_OP_WRITE (1 << 28)
> +#define FEC_MMFR_OP_ADDR_WRITE (0)
> #define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
> #define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
> #define FEC_MMFR_TA (2 << 16)
> @@ -1767,7 +1770,8 @@ static int fec_enet_mdio_read(struct mii_bus *bus,
> int mii_id, int regnum)
> struct fec_enet_private *fep = bus->priv;
> struct device *dev = &fep->pdev->dev;
> unsigned long time_left;
> - int ret = 0;
> + int ret = 0, frame_start, frame_addr, frame_op;
> + bool is_c45 = !!(regnum & MII_ADDR_C45);
>
> ret = pm_runtime_get_sync(dev);
> if (ret < 0)
> @@ -1775,9 +1779,37 @@ static int fec_enet_mdio_read(struct mii_bus
> *bus, int mii_id, int regnum)
>
> reinit_completion(&fep->mdio_done);
>
> + if (is_c45) {
> + frame_start = FEC_MMFR_ST_C45;
> +
> + /* write address */
> + frame_addr = (regnum >> 16);
> + writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> + FEC_MMFR_TA | (regnum & 0xFFFF),
> + fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + time_left = wait_for_completion_timeout(&fep->mdio_done,
> + usecs_to_jiffies(FEC_MII_TIMEOUT));
> + if (time_left == 0) {
> + netdev_err(fep->netdev, "MDIO address write timeout\n");
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> +
> + frame_op = FEC_MMFR_OP_READ_C45;
> +
> + } else {
> + /* C22 read */
> + frame_op = FEC_MMFR_OP_READ;
> + frame_start = FEC_MMFR_ST;
> + frame_addr = regnum;
> + }
> +
> /* start a read op */
> - writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
> - FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + writel(frame_start | frame_op |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
>
> /* wait for end of transfer */
> @@ -1804,7 +1836,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus,
> int mii_id, int regnum,
> struct fec_enet_private *fep = bus->priv;
> struct device *dev = &fep->pdev->dev;
> unsigned long time_left;
> - int ret;
> + int ret, frame_start, frame_addr;
> + bool is_c45 = !!(regnum & MII_ADDR_C45);
>
> ret = pm_runtime_get_sync(dev);
> if (ret < 0)
> @@ -1814,9 +1847,33 @@ static int fec_enet_mdio_write(struct mii_bus
> *bus, int mii_id, int regnum,
>
> reinit_completion(&fep->mdio_done);
>
> + if (is_c45) {
> + frame_start = FEC_MMFR_ST_C45;
> +
> + /* write address */
> + frame_addr = (regnum >> 16);
> + writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> + FEC_MMFR_TA | (regnum & 0xFFFF),
> + fep->hwp + FEC_MII_DATA);
> +
> + /* wait for end of transfer */
> + time_left = wait_for_completion_timeout(&fep->mdio_done,
> + usecs_to_jiffies(FEC_MII_TIMEOUT));
> + if (time_left == 0) {
> + netdev_err(fep->netdev, "MDIO address write timeout\n");
> + ret = -ETIMEDOUT;
> + goto out;
> + }
> + } else {
> + /* C22 write */
> + frame_start = FEC_MMFR_ST;
> + frame_addr = regnum;
> + }
> +
> /* start a write op */
> - writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
> - FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
> + writel(frame_start | FEC_MMFR_OP_WRITE |
> + FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> FEC_MMFR_TA | FEC_MMFR_DATA(value),
> fep->hwp + FEC_MII_DATA);
>
> @@ -1828,6 +1885,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus,
> int mii_id, int regnum,
> ret = -ETIMEDOUT;
> }
>
> +out:
> pm_runtime_mark_last_busy(dev);
> pm_runtime_put_autosuspend(dev);
>
> --
> 2.7.4
From: Marco Hartmann <[email protected]>
Date: Wed, 21 Aug 2019 11:43:49 +0000
> IEEE 802.3ae clause 45 defines a modified MDIO protocol that uses a two
> staged access model in order to increase the address space.
>
> This patch adds support for C45 MDIO read and write accesses, which are
> used whenever the MII_ADDR_C45 flag in the regnum argument is set.
> In case it is not set, C22 accesses are used as before.
>
> Signed-off-by: Marco Hartmann <[email protected]>
> ---
> Changes in v2:
> - use bool variable is_c45
> - add missing goto statements
Applied, thank you.