Use regulator_set/get_current_limit_regmap helpers to save some code.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/da9062-regulator.c | 125 +++++++--------------------
1 file changed, 32 insertions(+), 93 deletions(-)
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index b064d8a19d4c..ad0facb2be6a 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -53,16 +53,12 @@ enum {
/* Regulator capabilities and registers description */
struct da9062_regulator_info {
struct regulator_desc desc;
- /* Current limiting */
- unsigned int n_current_limits;
- const int *current_limits;
/* Main register fields */
struct reg_field mode;
struct reg_field suspend;
struct reg_field sleep;
struct reg_field suspend_sleep;
unsigned int suspend_vsel_reg;
- struct reg_field ilimit;
/* Event detection bit */
struct reg_field oc_event;
};
@@ -78,7 +74,6 @@ struct da9062_regulator {
struct regmap_field *suspend;
struct regmap_field *sleep;
struct regmap_field *suspend_sleep;
- struct regmap_field *ilimit;
};
/* Encapsulates all information for the regulators driver */
@@ -104,7 +99,7 @@ enum {
* - DA9062_ID_[BUCK1|BUCK2|BUCK4]
* Entry indexes corresponds to register values.
*/
-static const int da9062_buck_a_limits[] = {
+static const unsigned int da9062_buck_a_limits[] = {
500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000,
1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
};
@@ -114,44 +109,11 @@ static const int da9062_buck_a_limits[] = {
* - DA9062_ID_BUCK3
* Entry indexes corresponds to register values.
*/
-static const int da9062_buck_b_limits[] = {
+static const unsigned int da9062_buck_b_limits[] = {
1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
};
-static int da9062_set_current_limit(struct regulator_dev *rdev,
- int min_ua, int max_ua)
-{
- struct da9062_regulator *regl = rdev_get_drvdata(rdev);
- const struct da9062_regulator_info *rinfo = regl->info;
- int n, tval;
-
- for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
- tval = rinfo->current_limits[n];
- if (tval >= min_ua && tval <= max_ua)
- return regmap_field_write(regl->ilimit, n);
- }
-
- return -EINVAL;
-}
-
-static int da9062_get_current_limit(struct regulator_dev *rdev)
-{
- struct da9062_regulator *regl = rdev_get_drvdata(rdev);
- const struct da9062_regulator_info *rinfo = regl->info;
- unsigned int sel;
- int ret;
-
- ret = regmap_field_read(regl->ilimit, &sel);
- if (ret < 0)
- return ret;
-
- if (sel >= rinfo->n_current_limits)
- sel = rinfo->n_current_limits - 1;
-
- return rinfo->current_limits[sel];
-}
-
static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
{
struct da9062_regulator *regl = rdev_get_drvdata(rdev);
@@ -395,8 +357,8 @@ static const struct regulator_ops da9062_buck_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = da9062_set_current_limit,
- .get_current_limit = da9062_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
.set_mode = da9062_buck_set_mode,
.get_mode = da9062_buck_get_mode,
.get_status = da9062_buck_get_status,
@@ -433,8 +395,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1570) - (300))/(10) + 1,
- .current_limits = da9062_buck_a_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.curr_table = da9062_buck_a_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_C,
+ .desc.csel_mask = DA9062AA_BUCK1_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK1_CONT,
.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK1_A,
@@ -457,10 +421,6 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
- __builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_BUCK2,
@@ -471,8 +431,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.min_uV = (800) * 1000,
.desc.uV_step = (20) * 1000,
.desc.n_voltages = ((3340) - (800))/(20) + 1,
- .current_limits = da9062_buck_b_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+ .desc.curr_table = da9062_buck_b_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_A,
+ .desc.csel_mask = DA9062AA_BUCK3_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK3_CONT,
.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK3_A,
@@ -495,10 +457,6 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
- __builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_BUCK3,
@@ -509,8 +467,10 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
.desc.min_uV = (530) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1800) - (530))/(10) + 1,
- .current_limits = da9062_buck_a_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.curr_table = da9062_buck_a_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_B,
+ .desc.csel_mask = DA9062AA_BUCK4_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK4_CONT,
.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK4_A,
@@ -533,10 +493,6 @@ static const struct da9062_regulator_info local_da9061_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
- __builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
},
{
.desc.id = DA9061_ID_LDO1,
@@ -679,8 +635,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1570) - (300))/(10) + 1,
- .current_limits = da9062_buck_a_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.curr_table = da9062_buck_a_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_C,
+ .desc.csel_mask = DA9062AA_BUCK1_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK1_CONT,
.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK1_A,
@@ -703,10 +661,6 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
- __builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
},
{
.desc.id = DA9062_ID_BUCK2,
@@ -717,8 +671,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.min_uV = (300) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1570) - (300))/(10) + 1,
- .current_limits = da9062_buck_a_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.curr_table = da9062_buck_a_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_C,
+ .desc.csel_mask = DA9062AA_BUCK2_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK2_CONT,
.desc.enable_mask = DA9062AA_BUCK2_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK2_A,
@@ -741,10 +697,6 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK2_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK2_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
- __builtin_ffs((int)DA9062AA_BUCK2_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK2_ILIM_MASK)) - 1),
},
{
.desc.id = DA9062_ID_BUCK3,
@@ -755,8 +707,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.min_uV = (800) * 1000,
.desc.uV_step = (20) * 1000,
.desc.n_voltages = ((3340) - (800))/(20) + 1,
- .current_limits = da9062_buck_b_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+ .desc.curr_table = da9062_buck_b_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_A,
+ .desc.csel_mask = DA9062AA_BUCK3_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK3_CONT,
.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK3_A,
@@ -779,10 +733,6 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
- __builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
},
{
.desc.id = DA9062_ID_BUCK4,
@@ -793,8 +743,10 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
.desc.min_uV = (530) * 1000,
.desc.uV_step = (10) * 1000,
.desc.n_voltages = ((1800) - (530))/(10) + 1,
- .current_limits = da9062_buck_a_limits,
- .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.curr_table = da9062_buck_a_limits,
+ .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+ .desc.csel_reg = DA9062AA_BUCK_ILIM_B,
+ .desc.csel_mask = DA9062AA_BUCK4_ILIM_MASK,
.desc.enable_reg = DA9062AA_BUCK4_CONT,
.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
.desc.vsel_reg = DA9062AA_VBUCK4_A,
@@ -817,10 +769,6 @@ static const struct da9062_regulator_info local_da9062_regulator_info[] = {
__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
sizeof(unsigned int) * 8 -
__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
- .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
- __builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
- sizeof(unsigned int) * 8 -
- __builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
},
{
.desc.id = DA9062_ID_LDO1,
@@ -1063,15 +1011,6 @@ static int da9062_regulator_probe(struct platform_device *pdev)
return PTR_ERR(regl->suspend_sleep);
}
- if (regl->info->ilimit.reg) {
- regl->ilimit = devm_regmap_field_alloc(
- &pdev->dev,
- chip->regmap,
- regl->info->ilimit);
- if (IS_ERR(regl->ilimit))
- return PTR_ERR(regl->ilimit);
- }
-
/* Register regulator */
memset(&config, 0, sizeof(config));
config.dev = chip->dev;
--
2.17.1
Use regulator_set/get_current_limit_regmap helpers to save some code.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/da9063-regulator.c | 107 +++++++--------------------
1 file changed, 28 insertions(+), 79 deletions(-)
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 2b0c7a85306a..ceaaac602c6f 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -38,17 +38,12 @@
struct da9063_regulator_info {
struct regulator_desc desc;
- /* Current limiting */
- unsigned n_current_limits;
- const int *current_limits;
-
/* DA9063 main register fields */
struct reg_field mode; /* buck mode of operation */
struct reg_field suspend;
struct reg_field sleep;
struct reg_field suspend_sleep;
unsigned int suspend_vsel_reg;
- struct reg_field ilimit;
/* DA9063 event detection bit */
struct reg_field oc_event;
@@ -73,15 +68,18 @@ struct da9063_regulator_info {
.suspend_vsel_reg = DA9063_REG_V##regl_name##_B
/* Macros for voltage DC/DC converters (BUCKs) */
-#define DA9063_BUCK(chip, regl_name, min_mV, step_mV, max_mV, limits_array) \
+#define DA9063_BUCK(chip, regl_name, min_mV, step_mV, max_mV, limits_array, \
+ creg, cmask) \
.desc.id = chip##_ID_##regl_name, \
.desc.name = __stringify(chip##_##regl_name), \
.desc.ops = &da9063_buck_ops, \
.desc.min_uV = (min_mV) * 1000, \
.desc.uV_step = (step_mV) * 1000, \
.desc.n_voltages = ((max_mV) - (min_mV))/(step_mV) + 1, \
- .current_limits = limits_array, \
- .n_current_limits = ARRAY_SIZE(limits_array)
+ .desc.csel_reg = (creg), \
+ .desc.csel_mask = (cmask), \
+ .desc.curr_table = limits_array, \
+ .desc.n_current_limits = ARRAY_SIZE(limits_array)
#define DA9063_BUCK_COMMON_FIELDS(regl_name) \
.desc.enable_reg = DA9063_REG_##regl_name##_CONT, \
@@ -112,7 +110,6 @@ struct da9063_regulator {
struct regmap_field *suspend;
struct regmap_field *sleep;
struct regmap_field *suspend_sleep;
- struct regmap_field *ilimit;
};
/* Encapsulates all information for the regulators driver */
@@ -134,65 +131,32 @@ enum {
/* Current limits array (in uA) for BCORE1, BCORE2, BPRO.
Entry indexes corresponds to register values. */
-static const int da9063_buck_a_limits[] = {
+static const unsigned int da9063_buck_a_limits[] = {
500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000,
1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
};
/* Current limits array (in uA) for BMEM, BIO, BPERI.
Entry indexes corresponds to register values. */
-static const int da9063_buck_b_limits[] = {
+static const unsigned int da9063_buck_b_limits[] = {
1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
};
/* Current limits array (in uA) for merged BCORE1 and BCORE2.
Entry indexes corresponds to register values. */
-static const int da9063_bcores_merged_limits[] = {
+static const unsigned int da9063_bcores_merged_limits[] = {
1000000, 1200000, 1400000, 1600000, 1800000, 2000000, 2200000, 2400000,
2600000, 2800000, 3000000, 3200000, 3400000, 3600000, 3800000, 4000000
};
/* Current limits array (in uA) for merged BMEM and BIO.
Entry indexes corresponds to register values. */
-static const int da9063_bmem_bio_merged_limits[] = {
+static const unsigned int da9063_bmem_bio_merged_limits[] = {
3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
};
-static int da9063_set_current_limit(struct regulator_dev *rdev,
- int min_uA, int max_uA)
-{
- struct da9063_regulator *regl = rdev_get_drvdata(rdev);
- const struct da9063_regulator_info *rinfo = regl->info;
- int n, tval;
-
- for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
- tval = rinfo->current_limits[n];
- if (tval >= min_uA && tval <= max_uA)
- return regmap_field_write(regl->ilimit, n);
- }
-
- return -EINVAL;
-}
-
-static int da9063_get_current_limit(struct regulator_dev *rdev)
-{
- struct da9063_regulator *regl = rdev_get_drvdata(rdev);
- const struct da9063_regulator_info *rinfo = regl->info;
- unsigned int sel;
- int ret;
-
- ret = regmap_field_read(regl->ilimit, &sel);
- if (ret < 0)
- return ret;
-
- if (sel >= rinfo->n_current_limits)
- sel = rinfo->n_current_limits - 1;
-
- return rinfo->current_limits[sel];
-}
-
static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
{
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
@@ -434,8 +398,8 @@ static const struct regulator_ops da9063_buck_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = da9063_set_current_limit,
- .get_current_limit = da9063_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
.set_mode = da9063_buck_set_mode,
.get_mode = da9063_buck_get_mode,
.get_status = da9063_buck_get_status,
@@ -465,69 +429,61 @@ static const struct regulator_ops da9063_ldo_ops = {
static const struct da9063_regulator_info da9063_regulator_info[] = {
{
DA9063_BUCK(DA9063, BCORE1, 300, 10, 1570,
- da9063_buck_a_limits),
+ da9063_buck_a_limits,
+ DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BCORE1),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_C,
- DA9063_BCORE1_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BCORE2, 300, 10, 1570,
- da9063_buck_a_limits),
+ da9063_buck_a_limits,
+ DA9063_REG_BUCK_ILIM_C, DA9063_BCORE2_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BCORE2),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE2_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_C,
- DA9063_BCORE2_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BPRO, 530, 10, 1800,
- da9063_buck_a_limits),
+ da9063_buck_a_limits,
+ DA9063_REG_BUCK_ILIM_B, DA9063_BPRO_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BPRO),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPRO_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_B,
- DA9063_BPRO_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BMEM, 800, 20, 3340,
- da9063_buck_b_limits),
+ da9063_buck_b_limits,
+ DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BMEM),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_A,
- DA9063_BMEM_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BIO, 800, 20, 3340,
- da9063_buck_b_limits),
+ da9063_buck_b_limits,
+ DA9063_REG_BUCK_ILIM_A, DA9063_BIO_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BIO),
.suspend = BFIELD(DA9063_REG_DVC_2, DA9063_VBIO_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_A,
- DA9063_BIO_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BPERI, 800, 20, 3340,
- da9063_buck_b_limits),
+ da9063_buck_b_limits,
+ DA9063_REG_BUCK_ILIM_B, DA9063_BPERI_ILIM_MASK),
DA9063_BUCK_COMMON_FIELDS(BPERI),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPERI_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_B,
- DA9063_BPERI_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BCORES_MERGED, 300, 10, 1570,
- da9063_bcores_merged_limits),
+ da9063_bcores_merged_limits,
+ DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK),
/* BCORES_MERGED uses the same register fields as BCORE1 */
DA9063_BUCK_COMMON_FIELDS(BCORE1),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_C,
- DA9063_BCORE1_ILIM_MASK),
},
{
DA9063_BUCK(DA9063, BMEM_BIO_MERGED, 800, 20, 3340,
- da9063_bmem_bio_merged_limits),
+ da9063_bmem_bio_merged_limits,
+ DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK),
/* BMEM_BIO_MERGED uses the same register fields as BMEM */
DA9063_BUCK_COMMON_FIELDS(BMEM),
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL),
- .ilimit = BFIELD(DA9063_REG_BUCK_ILIM_A,
- DA9063_BMEM_ILIM_MASK),
},
{
DA9063_LDO(DA9063, LDO3, 900, 20, 3440),
@@ -861,13 +817,6 @@ static int da9063_regulator_probe(struct platform_device *pdev)
return PTR_ERR(regl->suspend_sleep);
}
- if (regl->info->ilimit.reg) {
- regl->ilimit = devm_regmap_field_alloc(&pdev->dev,
- da9063->regmap, regl->info->ilimit);
- if (IS_ERR(regl->ilimit))
- return PTR_ERR(regl->ilimit);
- }
-
/* Register regulator */
memset(&config, 0, sizeof(config));
config.dev = &pdev->dev;
--
2.17.1
Hi Axel,
On 04 March 2019 13:16, Axel Lin wrote:
> Subject: [PATCH 1/2] regulator: da9062: Convert to use
> regulator_set/get_current_limit_regmap
>
> Use regulator_set/get_current_limit_regmap helpers to save some code.
Thanks again,
Acked-by: Steve Twiss <[email protected]>
Regards,
Steve
ps.
This patch applies to next-20190305.
But doesn't cleanly apply cleanly to v5.0, I guess because there are several patches
queued up in linux-next, e.g. the reverse search of the limit array in the function
da9062_set_current_limit() ... etc, etc.
Hunk #4 FAILED at 109.
Hunk #20 FAILED at 1044
2 out of 20 hunks FAILED -- saving rejects to file drivers/regulator/da9062-regulator.c.rej
On 04 March 2019 13:16, Axel Lin wrote:
Hi Axel,
> To: Mark Brown <[email protected]>
> Subject: [PATCH 2/2] regulator: da9063: Convert to use
> regulator_set/get_current_limit_regmap
>
> Use regulator_set/get_current_limit_regmap helpers to save some code.
>
> Signed-off-by: Axel Lin <[email protected]>
> ---
> drivers/regulator/da9063-regulator.c | 107 +++++++--------------------
> 1 file changed, 28 insertions(+), 79 deletions(-)
Thanks again,
Acked-by: Steve Twiss <[email protected]>
Regards,
Steve
ps.
This patch applies to next-20190305.
But doesn't cleanly apply cleanly to v5.0, I guess because there are several patches
queued up in linux-next, in the same way as the da9062 patch has minor issues for v5.0.
Hunk #4 FAILED at 131.
Hunk #7 FAILED at 850
2 out of 7 hunks FAILED -- saving rejects to file drivers/regulator/da9063-regulator.c.rej