On 16/10/2022 10:32, [email protected] wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> This is a note to let you know that I've just added the patch titled
>
> riscv: topology: fix default topology reporting
>
> to the 6.0-stable tree which can be found at:
> http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
>
> The filename of the patch is:
> riscv-topology-fix-default-topology-reporting.patch
> and it can be found in the queue-6.0 subdirectory.
>
> If you, or anyone else, feels it should not be added to the stable tree,
> please let <[email protected]> know about it.
Hey Greg,
This breaks the build on 6.0 (and I can only assume on the other
stable queues too).
I put:
> CC: [email protected] # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
in the patch itself, did I specify the dependency incorrectly?
Thanks,
Conor.
>
>
> From fbd92809997a391f28075f1c8b5ee314c225557c Mon Sep 17 00:00:00 2001
> From: Conor Dooley <[email protected]>
> Date: Fri, 15 Jul 2022 18:51:56 +0100
> Subject: riscv: topology: fix default topology reporting
>
> From: Conor Dooley <[email protected]>
>
> commit fbd92809997a391f28075f1c8b5ee314c225557c upstream.
>
> RISC-V has no sane defaults to fall back on where there is no cpu-map
> in the devicetree.
> Without sane defaults, the package, core and thread IDs are all set to
> -1. This causes user-visible inaccuracies for tools like hwloc/lstopo
> which rely on the sysfs cpu topology files to detect a system's
> topology.
>
> On a PolarFire SoC, which should have 4 harts with a thread each,
> lstopo currently reports:
>
> Machine (793MB total)
> Package L#0
> NUMANode L#0 (P#0 793MB)
> Core L#0
> L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
> L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
> L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
> L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
>
> Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
> results in the correct topolgy being reported:
>
> Machine (793MB total)
> Package L#0
> NUMANode L#0 (P#0 793MB)
> L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
> L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
> L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
> L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
>
> CC: [email protected] # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
> Fixes: 03f11f03dbfe ("RISC-V: Parse cpu topology during boot.")
> Reported-by: Brice Goglin <[email protected]>
> Link: https://github.com/open-mpi/hwloc/issues/536
> Reviewed-by: Sudeep Holla <[email protected]>
> Reviewed-by: Atish Patra <[email protected]>
> Signed-off-by: Conor Dooley <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> arch/riscv/Kconfig | 2 +-
> arch/riscv/kernel/smpboot.c | 3 ++-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -52,7 +52,7 @@ config RISCV
> select COMMON_CLK
> select CPU_PM if CPU_IDLE
> select EDAC_SUPPORT
> - select GENERIC_ARCH_TOPOLOGY if SMP
> + select GENERIC_ARCH_TOPOLOGY
> select GENERIC_ATOMIC64 if !64BIT
> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
> select GENERIC_EARLY_IOREMAP
> --- a/arch/riscv/kernel/smpboot.c
> +++ b/arch/riscv/kernel/smpboot.c
> @@ -49,6 +49,7 @@ void __init smp_prepare_cpus(unsigned in
> unsigned int curr_cpuid;
>
> curr_cpuid = smp_processor_id();
> + store_cpu_topology(curr_cpuid);
> numa_store_cpu_info(curr_cpuid);
> numa_add_cpu(curr_cpuid);
>
> @@ -162,9 +163,9 @@ asmlinkage __visible void smp_callin(voi
> mmgrab(mm);
> current->active_mm = mm;
>
> + store_cpu_topology(curr_cpuid);
> notify_cpu_starting(curr_cpuid);
> numa_add_cpu(curr_cpuid);
> - update_siblings_masks(curr_cpuid);
> set_cpu_online(curr_cpuid, 1);
>
> /*
>
>
> Patches currently in stable-queue which might be from [email protected] are
>
> queue-6.0/riscv-always-honor-the-config_cmdline_force-when-parsing-dtb.patch
> queue-6.0/riscv-pass-mno-relax-only-on-lld-15.0.0.patch
> queue-6.0/riscv-topology-fix-default-topology-reporting.patch
> queue-6.0/risc-v-re-enable-counter-access-from-userspace.patch
On Sun, Oct 16, 2022 at 09:58:10AM +0000, [email protected] wrote:
> On 16/10/2022 10:32, [email protected] wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > This is a note to let you know that I've just added the patch titled
> >
> > riscv: topology: fix default topology reporting
> >
> > to the 6.0-stable tree which can be found at:
> > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
> >
> > The filename of the patch is:
> > riscv-topology-fix-default-topology-reporting.patch
> > and it can be found in the queue-6.0 subdirectory.
> >
> > If you, or anyone else, feels it should not be added to the stable tree,
> > please let <[email protected]> know about it.
>
> Hey Greg,
> This breaks the build on 6.0 (and I can only assume on the other
> stable queues too).
>
> I put:
> > CC: [email protected] # 456797da792f: arm64: topology: move store_cpu_topology() to shared code
> in the patch itself, did I specify the dependency incorrectly?
No, that's my fault, you specified this wonderfully, I just missed it :(
Now fixed up, thanks!
greg k-h