Update the UFS PHY nodes to match the new binding.
Signed-off-by: Johan Hovold <[email protected]>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 49 +++++++++-----------------
1 file changed, 17 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index e0d0fb6994b5..1b309fa93484 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -896,7 +896,7 @@ ufs_mem_hc: ufs@1d84000 {
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x3000>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -937,27 +937,20 @@ ufs_mem_hc: ufs@1d84000 {
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sc8280xp-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c8>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
+ reg = <0 0x01d87000 0 0x1000>;
+
clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clock-names = "ref", "ref_aux";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
- #phy-cells = <0>;
- };
+ #phy-cells = <0>;
+
+ status = "disabled";
};
ufs_card_hc: ufs@1da4000 {
@@ -965,7 +958,7 @@ ufs_card_hc: ufs@1da4000 {
"jedec,ufs-2.0";
reg = <0 0x01da4000 0 0x3000>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_card_phy_lanes>;
+ phys = <&ufs_card_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -1005,28 +998,20 @@ ufs_card_hc: ufs@1da4000 {
ufs_card_phy: phy@1da7000 {
compatible = "qcom,sc8280xp-qmp-ufs-phy";
- reg = <0 0x01da7000 0 0x1c8>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clock-names = "ref",
- "ref_aux";
+ reg = <0 0x01da7000 0 0x1000>;
+
clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
<&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+ clock-names = "ref", "ref_aux";
+
+ power-domains = <&gcc UFS_CARD_GDSC>;
resets = <&ufs_card_hc 0>;
reset-names = "ufsphy";
- status = "disabled";
+ #phy-cells = <0>;
- ufs_card_phy_lanes: phy@1da7400 {
- reg = <0 0x01da7400 0 0x108>,
- <0 0x01da7600 0 0x1e0>,
- <0 0x01da7c00 0 0x1dc>,
- <0 0x01da7800 0 0x108>,
- <0 0x01da7a00 0 0x1e0>;
- #phy-cells = <0>;
- };
+ status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
--
2.37.3
On 04/11/2022 10:20, Johan Hovold wrote:
> Update the UFS PHY nodes to match the new binding.
>
> Signed-off-by: Johan Hovold <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 49 +++++++++-----------------
> 1 file changed, 17 insertions(+), 32 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index e0d0fb6994b5..1b309fa93484 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -896,7 +896,7 @@ ufs_mem_hc: ufs@1d84000 {
> "jedec,ufs-2.0";
> reg = <0 0x01d84000 0 0x3000>;
> interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> + phys = <&ufs_mem_phy>;
> phy-names = "ufsphy";
> lanes-per-direction = <2>;
> #reset-cells = <1>;
> @@ -937,27 +937,20 @@ ufs_mem_hc: ufs@1d84000 {
>
> ufs_mem_phy: phy@1d87000 {
> compatible = "qcom,sc8280xp-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c8>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> + reg = <0 0x01d87000 0 0x1000>;
> +
> clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
> <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> + clock-names = "ref", "ref_aux";
> +
> + power-domains = <&gcc UFS_PHY_GDSC>;
>
> resets = <&ufs_mem_hc 0>;
> reset-names = "ufsphy";
> - status = "disabled";
>
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x108>,
> - <0 0x01d87600 0 0x1e0>,
> - <0 0x01d87c00 0 0x1dc>,
> - <0 0x01d87800 0 0x108>,
> - <0 0x01d87a00 0 0x1e0>;
> - #phy-cells = <0>;
> - };
> + #phy-cells = <0>;
> +
> + status = "disabled";
> };
>
> ufs_card_hc: ufs@1da4000 {
> @@ -965,7 +958,7 @@ ufs_card_hc: ufs@1da4000 {
> "jedec,ufs-2.0";
> reg = <0 0x01da4000 0 0x3000>;
> interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_card_phy_lanes>;
> + phys = <&ufs_card_phy>;
> phy-names = "ufsphy";
> lanes-per-direction = <2>;
> #reset-cells = <1>;
> @@ -1005,28 +998,20 @@ ufs_card_hc: ufs@1da4000 {
>
> ufs_card_phy: phy@1da7000 {
> compatible = "qcom,sc8280xp-qmp-ufs-phy";
> - reg = <0 0x01da7000 0 0x1c8>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> + reg = <0 0x01da7000 0 0x1000>;
> +
> clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
> <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
> + clock-names = "ref", "ref_aux";
> +
> + power-domains = <&gcc UFS_CARD_GDSC>;
>
> resets = <&ufs_card_hc 0>;
> reset-names = "ufsphy";
>
> - status = "disabled";
> + #phy-cells = <0>;
>
> - ufs_card_phy_lanes: phy@1da7400 {
> - reg = <0 0x01da7400 0 0x108>,
> - <0 0x01da7600 0 0x1e0>,
> - <0 0x01da7c00 0 0x1dc>,
> - <0 0x01da7800 0 0x108>,
> - <0 0x01da7a00 0 0x1e0>;
> - #phy-cells = <0>;
> - };
> + status = "disabled";
> };
>
> tcsr_mutex: hwlock@1f40000 {
On Fri, Nov 04, 2022 at 10:20:45AM +0100, Johan Hovold wrote:
> Update the UFS PHY nodes to match the new binding.
>
> Signed-off-by: Johan Hovold <[email protected]>
This is needed in order to boot the sa8540p on linux-next-20221110.
Reviewed-by: Brian Masney <[email protected]>
On Mon, Nov 14, 2022 at 12:18:24PM -0500, Brian Masney wrote:
> On Fri, Nov 04, 2022 at 10:20:45AM +0100, Johan Hovold wrote:
> > Update the UFS PHY nodes to match the new binding.
> >
> > Signed-off-by: Johan Hovold <[email protected]>
>
> This is needed in order to boot the sa8540p on linux-next-20221110.
Actually, I take that back... This is not needed to boot on -next. There
was a separate problem on the latest -next that I describe at:
https://lore.kernel.org/linux-arm-msm/[email protected]/T/#u
My Reviewed-by still applies for the patch.
Brian