It seems the hardcoded 0x800 isn't necessary, but removing it brings a
small vdso.so and aligns with other architectures.
Signed-off-by: Jisheng Zhang <[email protected]>
---
arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
index 150b1a572e61..7be7e618d59c 100644
--- a/arch/riscv/kernel/vdso/vdso.lds.S
+++ b/arch/riscv/kernel/vdso/vdso.lds.S
@@ -31,13 +31,7 @@ SECTIONS
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
- /*
- * This linker script is used both with -r and with -shared.
- * For the layouts to match, we need to skip more than enough
- * space for the dynamic symbol table, etc. If this amount is
- * insufficient, ld -shared will error; simply increase it here.
- */
- . = 0x800;
+ . = ALIGN(4);
.text : { *(.text .text.*) } :text
.data : {
--
2.37.2
On Thu, Nov 24, 2022 at 12:18:05AM +0800, Jisheng Zhang wrote:
> It seems the hardcoded 0x800 isn't necessary, but removing it brings a
s/, but/and/
> small vdso.so and aligns with other architectures.
This commit message didn't really satisfy my desire to understand why
the comment and '. = 0x800' were there in the first place and if its safe
to remove now, so I tried to do some of my own digging. I found
commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds")
commit f6b46ebf904f ("x86 vDSO: new layout")
which removes the comment and hard coding for x86 by changing the vdso
Makefile. Then looking at
commit 9031fefde6f2 ("arm64: VDSO support")
we see that it starts with the new Makefile approach and doesn't bother
with the hard coding from the start. As riscv also started with the new
Makefile approach it also could have dropped the hard coding from the
start (I guess).
>
> Signed-off-by: Jisheng Zhang <[email protected]>
> ---
> arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
> 1 file changed, 1 insertion(+), 7 deletions(-)
>
> diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
> index 150b1a572e61..7be7e618d59c 100644
> --- a/arch/riscv/kernel/vdso/vdso.lds.S
> +++ b/arch/riscv/kernel/vdso/vdso.lds.S
> @@ -31,13 +31,7 @@ SECTIONS
>
> .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
>
> - /*
> - * This linker script is used both with -r and with -shared.
> - * For the layouts to match, we need to skip more than enough
> - * space for the dynamic symbol table, etc. If this amount is
> - * insufficient, ld -shared will error; simply increase it here.
> - */
> - . = 0x800;
> + . = ALIGN(4);
I realize 4 is used here now because I questioned the 16, but after doing
my digging I think a larger alignment may be better. Loading the text may
be done with 8 byte or larger reads, so having the section aligned to a
larger size would be better reading it. We might as well use 16, like
arm64 does, and like you had before?
Also, having enough separation between data and text seems to be
important for cache reasons, based on the comment in
./arch/x86/entry/vdso/vdso-layout.lds.S and other vdso history.
Maybe we should move .note, .eh_frame_hdr, and .eh_frame below
.rodata like x86 has it?
Thanks,
drew
> .text : { *(.text .text.*) } :text
>
> .data : {
> --
> 2.37.2
>
On Thu, Nov 24, 2022 at 11:32:55AM +0100, Andrew Jones wrote:
> On Thu, Nov 24, 2022 at 12:18:05AM +0800, Jisheng Zhang wrote:
> > It seems the hardcoded 0x800 isn't necessary, but removing it brings a
>
> s/, but/and/
>
> > small vdso.so and aligns with other architectures.
>
> This commit message didn't really satisfy my desire to understand why
> the comment and '. = 0x800' were there in the first place and if its safe
> to remove now, so I tried to do some of my own digging. I found
>
> commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds")
> commit f6b46ebf904f ("x86 vDSO: new layout")
>
> which removes the comment and hard coding for x86 by changing the vdso
> Makefile. Then looking at
>
> commit 9031fefde6f2 ("arm64: VDSO support")
>
> we see that it starts with the new Makefile approach and doesn't bother
> with the hard coding from the start. As riscv also started with the new
> Makefile approach it also could have dropped the hard coding from the
> start (I guess).
>
> >
> > Signed-off-by: Jisheng Zhang <[email protected]>
> > ---
> > arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
> > 1 file changed, 1 insertion(+), 7 deletions(-)
> >
> > diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
> > index 150b1a572e61..7be7e618d59c 100644
> > --- a/arch/riscv/kernel/vdso/vdso.lds.S
> > +++ b/arch/riscv/kernel/vdso/vdso.lds.S
> > @@ -31,13 +31,7 @@ SECTIONS
> >
> > .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
> >
> > - /*
> > - * This linker script is used both with -r and with -shared.
> > - * For the layouts to match, we need to skip more than enough
> > - * space for the dynamic symbol table, etc. If this amount is
> > - * insufficient, ld -shared will error; simply increase it here.
> > - */
> > - . = 0x800;
> > + . = ALIGN(4);
>
> I realize 4 is used here now because I questioned the 16, but after doing
> my digging I think a larger alignment may be better. Loading the text may
> be done with 8 byte or larger reads, so having the section aligned to a
> larger size would be better reading it. We might as well use 16, like
> arm64 does, and like you had before?
>
> Also, having enough separation between data and text seems to be
> important for cache reasons, based on the comment in
> ./arch/x86/entry/vdso/vdso-layout.lds.S and other vdso history.
> Maybe we should move .note, .eh_frame_hdr, and .eh_frame below
> .rodata like x86 has it?
>
Thank you so much for pointing out the two commits and above
separation, new version will be sent out soon.
On Fri, Nov 25, 2022 at 12:11:09AM +0800, Jisheng Zhang wrote:
> On Thu, Nov 24, 2022 at 11:32:55AM +0100, Andrew Jones wrote:
> > On Thu, Nov 24, 2022 at 12:18:05AM +0800, Jisheng Zhang wrote:
> > > It seems the hardcoded 0x800 isn't necessary, but removing it brings a
> >
> > s/, but/and/
> >
> > > small vdso.so and aligns with other architectures.
> >
> > This commit message didn't really satisfy my desire to understand why
> > the comment and '. = 0x800' were there in the first place and if its safe
> > to remove now, so I tried to do some of my own digging. I found
> >
> > commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds")
> > commit f6b46ebf904f ("x86 vDSO: new layout")
> >
> > which removes the comment and hard coding for x86 by changing the vdso
> > Makefile. Then looking at
> >
> > commit 9031fefde6f2 ("arm64: VDSO support")
> >
> > we see that it starts with the new Makefile approach and doesn't bother
> > with the hard coding from the start. As riscv also started with the new
> > Makefile approach it also could have dropped the hard coding from the
> > start (I guess).
> >
> > >
> > > Signed-off-by: Jisheng Zhang <[email protected]>
> > > ---
> > > arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
> > > 1 file changed, 1 insertion(+), 7 deletions(-)
> > >
> > > diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
> > > index 150b1a572e61..7be7e618d59c 100644
> > > --- a/arch/riscv/kernel/vdso/vdso.lds.S
> > > +++ b/arch/riscv/kernel/vdso/vdso.lds.S
> > > @@ -31,13 +31,7 @@ SECTIONS
> > >
> > > .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
> > >
> > > - /*
> > > - * This linker script is used both with -r and with -shared.
> > > - * For the layouts to match, we need to skip more than enough
> > > - * space for the dynamic symbol table, etc. If this amount is
> > > - * insufficient, ld -shared will error; simply increase it here.
> > > - */
> > > - . = 0x800;
> > > + . = ALIGN(4);
> >
> > I realize 4 is used here now because I questioned the 16, but after doing
> > my digging I think a larger alignment may be better. Loading the text may
> > be done with 8 byte or larger reads, so having the section aligned to a
> > larger size would be better reading it. We might as well use 16, like
> > arm64 does, and like you had before?
> >
> > Also, having enough separation between data and text seems to be
> > important for cache reasons, based on the comment in
> > ./arch/x86/entry/vdso/vdso-layout.lds.S and other vdso history.
> > Maybe we should move .note, .eh_frame_hdr, and .eh_frame below
> > .rodata like x86 has it?
> >
>
> Thank you so much for pointing out the two commits and above
> separation, new version will be sent out soon.
After looking at the git history, besides your wonderful suggestion,
I think we can do something more to clean up and make riscv vdso
better, for example, Is the .data section read only, so could be
merged with .rodata? or we can discard it as arm64 does? I need some
time to dump the section then check and do some test.
On Thu, 24 Nov 2022 08:11:05 PST (-0800), [email protected] wrote:
> On Thu, Nov 24, 2022 at 11:32:55AM +0100, Andrew Jones wrote:
>> On Thu, Nov 24, 2022 at 12:18:05AM +0800, Jisheng Zhang wrote:
>> > It seems the hardcoded 0x800 isn't necessary, but removing it brings a
>>
>> s/, but/and/
>>
>> > small vdso.so and aligns with other architectures.
>>
>> This commit message didn't really satisfy my desire to understand why
>> the comment and '. = 0x800' were there in the first place and if its safe
>> to remove now, so I tried to do some of my own digging. I found
>>
>> commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds")
>> commit f6b46ebf904f ("x86 vDSO: new layout")
>>
>> which removes the comment and hard coding for x86 by changing the vdso
>> Makefile. Then looking at
>>
>> commit 9031fefde6f2 ("arm64: VDSO support")
>>
>> we see that it starts with the new Makefile approach and doesn't bother
>> with the hard coding from the start. As riscv also started with the new
>> Makefile approach it also could have dropped the hard coding from the
>> start (I guess).
>>
>> >
>> > Signed-off-by: Jisheng Zhang <[email protected]>
>> > ---
>> > arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
>> > 1 file changed, 1 insertion(+), 7 deletions(-)
>> >
>> > diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
>> > index 150b1a572e61..7be7e618d59c 100644
>> > --- a/arch/riscv/kernel/vdso/vdso.lds.S
>> > +++ b/arch/riscv/kernel/vdso/vdso.lds.S
>> > @@ -31,13 +31,7 @@ SECTIONS
>> >
>> > .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
>> >
>> > - /*
>> > - * This linker script is used both with -r and with -shared.
>> > - * For the layouts to match, we need to skip more than enough
>> > - * space for the dynamic symbol table, etc. If this amount is
>> > - * insufficient, ld -shared will error; simply increase it here.
>> > - */
>> > - . = 0x800;
>> > + . = ALIGN(4);
>>
>> I realize 4 is used here now because I questioned the 16, but after doing
>> my digging I think a larger alignment may be better. Loading the text may
>> be done with 8 byte or larger reads, so having the section aligned to a
>> larger size would be better reading it. We might as well use 16, like
>> arm64 does, and like you had before?
>>
>> Also, having enough separation between data and text seems to be
>> important for cache reasons, based on the comment in
>> ./arch/x86/entry/vdso/vdso-layout.lds.S and other vdso history.
>> Maybe we should move .note, .eh_frame_hdr, and .eh_frame below
>> .rodata like x86 has it?
>>
>
> Thank you so much for pointing out the two commits and above
> separation, new version will be sent out soon.
Not sure if I missed the v2? I can't find one.
On Fri, Dec 09, 2022 at 11:02:18AM -0800, Palmer Dabbelt wrote:
> On Thu, 24 Nov 2022 08:11:05 PST (-0800), [email protected] wrote:
> > On Thu, Nov 24, 2022 at 11:32:55AM +0100, Andrew Jones wrote:
> > > On Thu, Nov 24, 2022 at 12:18:05AM +0800, Jisheng Zhang wrote:
> > > > It seems the hardcoded 0x800 isn't necessary, but removing it brings a
> > >
> > > s/, but/and/
> > >
> > > > small vdso.so and aligns with other architectures.
> > >
> > > This commit message didn't really satisfy my desire to understand why
> > > the comment and '. = 0x800' were there in the first place and if its safe
> > > to remove now, so I tried to do some of my own digging. I found
> > >
> > > commit 5b9304933730 ("x86 vDSO: generate vdso-syms.lds")
> > > commit f6b46ebf904f ("x86 vDSO: new layout")
> > >
> > > which removes the comment and hard coding for x86 by changing the vdso
> > > Makefile. Then looking at
> > >
> > > commit 9031fefde6f2 ("arm64: VDSO support")
> > >
> > > we see that it starts with the new Makefile approach and doesn't bother
> > > with the hard coding from the start. As riscv also started with the new
> > > Makefile approach it also could have dropped the hard coding from the
> > > start (I guess).
> > >
> > > >
> > > > Signed-off-by: Jisheng Zhang <[email protected]>
> > > > ---
> > > > arch/riscv/kernel/vdso/vdso.lds.S | 8 +-------
> > > > 1 file changed, 1 insertion(+), 7 deletions(-)
> > > >
> > > > diff --git a/arch/riscv/kernel/vdso/vdso.lds.S b/arch/riscv/kernel/vdso/vdso.lds.S
> > > > index 150b1a572e61..7be7e618d59c 100644
> > > > --- a/arch/riscv/kernel/vdso/vdso.lds.S
> > > > +++ b/arch/riscv/kernel/vdso/vdso.lds.S
> > > > @@ -31,13 +31,7 @@ SECTIONS
> > > >
> > > > .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
> > > >
> > > > - /*
> > > > - * This linker script is used both with -r and with -shared.
> > > > - * For the layouts to match, we need to skip more than enough
> > > > - * space for the dynamic symbol table, etc. If this amount is
> > > > - * insufficient, ld -shared will error; simply increase it here.
> > > > - */
> > > > - . = 0x800;
> > > > + . = ALIGN(4);
> > >
> > > I realize 4 is used here now because I questioned the 16, but after doing
> > > my digging I think a larger alignment may be better. Loading the text may
> > > be done with 8 byte or larger reads, so having the section aligned to a
> > > larger size would be better reading it. We might as well use 16, like
> > > arm64 does, and like you had before?
> > >
> > > Also, having enough separation between data and text seems to be
> > > important for cache reasons, based on the comment in
> > > ./arch/x86/entry/vdso/vdso-layout.lds.S and other vdso history.
> > > Maybe we should move .note, .eh_frame_hdr, and .eh_frame below
> > > .rodata like x86 has it?
> > >
> >
> > Thank you so much for pointing out the two commits and above
> > separation, new version will be sent out soon.
>
> Not sure if I missed the v2? I can't find one.
When I want to sent a v2, I just knew that patches after rc7 won't
be merged for next rc1. Sorry for not being earlier. Will send out
v2 once new developement window is reopen.
Thanks