From: Neil Armstrong <[email protected]>
Also check the hardware write pointer to check if ES Parser has stalled.
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
drivers/staging/media/meson/vdec/esparser.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/meson/vdec/esparser.c b/drivers/staging/media/meson/vdec/esparser.c
index df5956c6141d..41b705f999b2 100644
--- a/drivers/staging/media/meson/vdec/esparser.c
+++ b/drivers/staging/media/meson/vdec/esparser.c
@@ -300,6 +300,7 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
u32 num_dst_bufs = 0;
u32 offset;
u32 pad_size;
+ u32 wp, wp2;
/*
* When max ref frame is held by VP9, this should be -= 3 to prevent a
@@ -354,15 +355,21 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
}
pad_size = esparser_pad_start_code(core, vb, payload_size);
+ wp = amvdec_read_parser(core, PARSER_VIDEO_WP);
ret = esparser_write_data(core, phy, payload_size + pad_size);
+ wp2 = amvdec_read_parser(core, PARSER_VIDEO_WP);
if (ret <= 0) {
- dev_warn(core->dev, "esparser: input parsing error\n");
- amvdec_remove_ts(sess, vb->timestamp);
- v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
amvdec_write_parser(core, PARSER_FETCH_CMD, 0);
- return 0;
+ if (ret < 0 || wp2 == wp) {
+ dev_err(core->dev, "esparser: input parsing error ret %d (%x <=> %x)\n",
+ ret, wp, wp2);
+ amvdec_remove_ts(sess, vb->timestamp);
+ v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
+
+ return 0;
+ }
}
atomic_inc(&sess->esparser_queued_bufs);
--
2.34.1
On 23/01/2023 10:43, Christian Hewitt wrote:
> From: Neil Armstrong <[email protected]>
>
> Also check the hardware write pointer to check if ES Parser has stalled.
>
> Signed-off-by: Neil Armstrong <[email protected]>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> drivers/staging/media/meson/vdec/esparser.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/media/meson/vdec/esparser.c b/drivers/staging/media/meson/vdec/esparser.c
> index df5956c6141d..41b705f999b2 100644
> --- a/drivers/staging/media/meson/vdec/esparser.c
> +++ b/drivers/staging/media/meson/vdec/esparser.c
> @@ -300,6 +300,7 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
> u32 num_dst_bufs = 0;
> u32 offset;
> u32 pad_size;
> + u32 wp, wp2;
>
> /*
> * When max ref frame is held by VP9, this should be -= 3 to prevent a
> @@ -354,15 +355,21 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
> }
>
> pad_size = esparser_pad_start_code(core, vb, payload_size);
> + wp = amvdec_read_parser(core, PARSER_VIDEO_WP);
> ret = esparser_write_data(core, phy, payload_size + pad_size);
> + wp2 = amvdec_read_parser(core, PARSER_VIDEO_WP);
>
> if (ret <= 0) {
> - dev_warn(core->dev, "esparser: input parsing error\n");
> - amvdec_remove_ts(sess, vb->timestamp);
> - v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> amvdec_write_parser(core, PARSER_FETCH_CMD, 0);
>
> - return 0;
> + if (ret < 0 || wp2 == wp) {
> + dev_err(core->dev, "esparser: input parsing error ret %d (%x <=> %x)\n",
> + ret, wp, wp2);
> + amvdec_remove_ts(sess, vb->timestamp);
> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> +
> + return 0;
> + }
> }
>
> atomic_inc(&sess->esparser_queued_bufs);
It's weird, but:
Acked-by: Neil Armstrong <[email protected]>
Thanks Christian for handling those changes
Neil
On Mon, Jan 23, 2023 at 09:43:00AM +0000, Christian Hewitt wrote:
> From: Neil Armstrong <[email protected]>
>
> Also check the hardware write pointer to check if ES Parser has stalled.
>
Presumably this is something which has happens in real life? Say a user
has this hardware and is wondering if this patch fixes their bug, what
does this bug look like to them?
Please add a Fixes tag.
> Signed-off-by: Neil Armstrong <[email protected]>
> Signed-off-by: Christian Hewitt <[email protected]>
> ---
> drivers/staging/media/meson/vdec/esparser.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/media/meson/vdec/esparser.c b/drivers/staging/media/meson/vdec/esparser.c
> index df5956c6141d..41b705f999b2 100644
> --- a/drivers/staging/media/meson/vdec/esparser.c
> +++ b/drivers/staging/media/meson/vdec/esparser.c
> @@ -300,6 +300,7 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
> u32 num_dst_bufs = 0;
> u32 offset;
> u32 pad_size;
> + u32 wp, wp2;
>
> /*
> * When max ref frame is held by VP9, this should be -= 3 to prevent a
> @@ -354,15 +355,21 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
> }
>
> pad_size = esparser_pad_start_code(core, vb, payload_size);
> + wp = amvdec_read_parser(core, PARSER_VIDEO_WP);
> ret = esparser_write_data(core, phy, payload_size + pad_size);
> + wp2 = amvdec_read_parser(core, PARSER_VIDEO_WP);
>
Why is check not done inside the esparser_write_data() function? It
really feels like doing a write where nothing happens should be a bug
for both callers...
The esparser_write_data() function returns > 0 on success, 0 on timeout
(I guess timeout is an error-ish) and negative if the user presses
CTR-C. There are no comments to explain the unusual returns. Could we
clean this up so it just returns negatives on error and zero on success
or if not then let's add a comment explaining what's going on?
> if (ret <= 0) {
> - dev_warn(core->dev, "esparser: input parsing error\n");
> - amvdec_remove_ts(sess, vb->timestamp);
> - v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> amvdec_write_parser(core, PARSER_FETCH_CMD, 0);
>
> - return 0;
> + if (ret < 0 || wp2 == wp) {
So in this patch if there is a timeout but something was written then
that's kind of a success path?
regards,
dan carpenter
> + dev_err(core->dev, "esparser: input parsing error ret %d (%x <=> %x)\n",
> + ret, wp, wp2);
> + amvdec_remove_ts(sess, vb->timestamp);
> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> +
> + return 0;
> + }
> }
>
> atomic_inc(&sess->esparser_queued_bufs);
Hi Christian,
On 23/01/2023 13:04, Dan Carpenter wrote:
> On Mon, Jan 23, 2023 at 09:43:00AM +0000, Christian Hewitt wrote:
>> From: Neil Armstrong <[email protected]>
>>
>> Also check the hardware write pointer to check if ES Parser has stalled.
>>
>
> Presumably this is something which has happens in real life? Say a user
> has this hardware and is wondering if this patch fixes their bug, what
> does this bug look like to them?
>
> Please add a Fixes tag.
I'm marking this as Changes Requested in patchwork.
Dan has good comments, and in general, if something is 'weird', then
it needs to be commented carefully.
Regards,
Hans
>
>> Signed-off-by: Neil Armstrong <[email protected]>
>> Signed-off-by: Christian Hewitt <[email protected]>
>> ---
>> drivers/staging/media/meson/vdec/esparser.c | 15 +++++++++++----
>> 1 file changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/staging/media/meson/vdec/esparser.c b/drivers/staging/media/meson/vdec/esparser.c
>> index df5956c6141d..41b705f999b2 100644
>> --- a/drivers/staging/media/meson/vdec/esparser.c
>> +++ b/drivers/staging/media/meson/vdec/esparser.c
>> @@ -300,6 +300,7 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
>> u32 num_dst_bufs = 0;
>> u32 offset;
>> u32 pad_size;
>> + u32 wp, wp2;
>>
>> /*
>> * When max ref frame is held by VP9, this should be -= 3 to prevent a
>> @@ -354,15 +355,21 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
>> }
>>
>> pad_size = esparser_pad_start_code(core, vb, payload_size);
>> + wp = amvdec_read_parser(core, PARSER_VIDEO_WP);
>> ret = esparser_write_data(core, phy, payload_size + pad_size);
>> + wp2 = amvdec_read_parser(core, PARSER_VIDEO_WP);
>>
>
> Why is check not done inside the esparser_write_data() function? It
> really feels like doing a write where nothing happens should be a bug
> for both callers...
>
> The esparser_write_data() function returns > 0 on success, 0 on timeout
> (I guess timeout is an error-ish) and negative if the user presses
> CTR-C. There are no comments to explain the unusual returns. Could we
> clean this up so it just returns negatives on error and zero on success
> or if not then let's add a comment explaining what's going on?
>
>> if (ret <= 0) {
>> - dev_warn(core->dev, "esparser: input parsing error\n");
>> - amvdec_remove_ts(sess, vb->timestamp);
>> - v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
>> amvdec_write_parser(core, PARSER_FETCH_CMD, 0);
>>
>> - return 0;
>> + if (ret < 0 || wp2 == wp) {
>
> So in this patch if there is a timeout but something was written then
> that's kind of a success path?
>
> regards,
> dan carpenter
>
>> + dev_err(core->dev, "esparser: input parsing error ret %d (%x <=> %x)\n",
>> + ret, wp, wp2);
>> + amvdec_remove_ts(sess, vb->timestamp);
>> + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
>> +
>> + return 0;
>> + }
>> }
>>
>> atomic_inc(&sess->esparser_queued_bufs);
>