This is the start of the stable review cycle for the 5.4.96 release.
There are 32 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.96-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.96-rc1
Peter Zijlstra <[email protected]>
workqueue: Restrict affinity change to rescuer
Peter Zijlstra <[email protected]>
kthread: Extract KTHREAD_IS_PER_CPU
Josh Poimboeuf <[email protected]>
objtool: Don't fail on missing symbol table
Bing Guo <[email protected]>
drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
Jake Wang <[email protected]>
drm/amd/display: Update dram_clock_change_latency for DCN2.1
Michael Ellerman <[email protected]>
selftests/powerpc: Only test lwm/stmw on big endian
Revanth Rajashekar <[email protected]>
nvme: check the PRINFO bit before deciding the host buffer length
lianzhi chang <[email protected]>
udf: fix the problem that the disc content is not displayed
Kai-Chuan Hsieh <[email protected]>
ALSA: hda: Add Cometlake-R PCI ID
Brian King <[email protected]>
scsi: ibmvfc: Set default timeout to avoid crash during migration
Felix Fietkau <[email protected]>
mac80211: fix fast-rx encryption check
Kai-Heng Feng <[email protected]>
ASoC: SOF: Intel: hda: Resume codec to do jack detection
Dinghao Liu <[email protected]>
scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
Javed Hasan <[email protected]>
scsi: libfc: Avoid invoking response handler twice if ep is already completed
Martin Wilck <[email protected]>
scsi: scsi_transport_srp: Don't block target in failfast state
Peter Zijlstra <[email protected]>
x86: __always_inline __{rd,wr}msr()
Arnold Gozum <[email protected]>
platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
Hans de Goede <[email protected]>
platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
Tony Lindgren <[email protected]>
phy: cpcap-usb: Fix warning for missing regulator_disable
Eric Dumazet <[email protected]>
net_sched: gen_estimator: support large ewma log
ethanwu <[email protected]>
btrfs: backref, use correct count to resolve normal data refs
ethanwu <[email protected]>
btrfs: backref, only search backref entries from leaves of the same root
ethanwu <[email protected]>
btrfs: backref, don't add refs from shared block when resolving normal backref
ethanwu <[email protected]>
btrfs: backref, only collect file extent items matching backref offset
Enke Chen <[email protected]>
tcp: make TCP_USER_TIMEOUT accurate for zero window probes
Catalin Marinas <[email protected]>
arm64: Do not pass tagged addresses to __is_lm_address()
Vincenzo Frascino <[email protected]>
arm64: Fix kernel address detection of __is_lm_address()
Rafael J. Wysocki <[email protected]>
ACPI: thermal: Do not call acpi_thermal_check() directly
Greg Kroah-Hartman <[email protected]>
Revert "Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT""
Lijun Pan <[email protected]>
ibmvnic: Ensure that CRQ entry read are correctly ordered
Rasmus Villemoes <[email protected]>
net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
Pan Bian <[email protected]>
net: dsa: bcm_sf2: put device node before return
-------------
Diffstat:
Makefile | 4 +-
arch/arm64/include/asm/memory.h | 10 +-
arch/arm64/mm/physaddr.c | 2 +-
arch/x86/include/asm/msr.h | 4 +-
block/blk-core.c | 11 +-
drivers/acpi/thermal.c | 55 +++++---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +
.../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
drivers/net/dsa/bcm_sf2.c | 8 +-
drivers/net/ethernet/ibm/ibmvnic.c | 6 +
drivers/nvme/host/core.c | 17 ++-
drivers/phy/motorola/phy-cpcap-usb.c | 19 ++-
drivers/platform/x86/intel-vbtn.c | 6 +
drivers/platform/x86/touchscreen_dmi.c | 18 +++
drivers/scsi/fnic/vnic_dev.c | 8 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 4 +-
drivers/scsi/libfc/fc_exch.c | 16 ++-
drivers/scsi/scsi_transport_srp.c | 9 +-
fs/btrfs/backref.c | 157 +++++++++++++--------
fs/udf/super.c | 7 +-
include/linux/kthread.h | 3 +
include/net/tcp.h | 1 +
kernel/kthread.c | 27 +++-
kernel/smpboot.c | 1 +
kernel/workqueue.c | 9 +-
net/core/gen_estimator.c | 11 +-
net/ipv4/tcp_input.c | 1 +
net/ipv4/tcp_output.c | 2 +
net/ipv4/tcp_timer.c | 18 +++
net/mac80211/rx.c | 2 +
net/switchdev/switchdev.c | 23 +--
sound/pci/hda/hda_intel.c | 3 +
sound/soc/sof/intel/hda-codec.c | 3 +-
tools/objtool/elf.c | 7 +-
.../powerpc/alignment/alignment_handler.c | 5 +-
35 files changed, 348 insertions(+), 134 deletions(-)
From: ethanwu <[email protected]>
commit b25b0b871f206936d5bca02b80d38c05623e27da upstream.
With the following patches:
- btrfs: backref, only collect file extent items matching backref offset
- btrfs: backref, not adding refs from shared block when resolving normal backref
- btrfs: backref, only search backref entries from leaves of the same root
we only collect the normal data refs we want, so the imprecise upper
bound total_refs of that EXTENT_ITEM could now be changed to the count
of the normal backref entry we want to search.
Background and how the patches fit together:
Btrfs has two types of data backref.
For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the
exact block number. Therefore, we need to call resolve_indirect_refs.
It uses btrfs_search_slot to locate the leaf block. Then
we need to walk through the leaves to search for the EXTENT_DATA items
that have disk bytenr matching the extent item (add_all_parents).
When resolving indirect refs, we could take entries that don't
belong to the backref entry we are searching for right now.
For that reason when searching backref entry, we always use total
refs of that EXTENT_ITEM rather than individual count.
For example:
item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize
extent refs 24 gen 7302 flags DATA
shared data backref parent 394985472 count 10 #1
extent data backref root 257 objectid 260 offset 1048576 count 3 #2
extent data backref root 256 objectid 260 offset 65536 count 6 #3
extent data backref root 257 objectid 260 offset 65536 count 5 #4
For example, when searching backref entry #4, we'll use total_refs
24, a very loose loop ending condition, instead of total_refs = 5.
But using total_refs = 24 is not accurate. Sometimes, we'll never find
all the refs from specific root. As a result, the loop keeps on going
until we reach the end of that inode.
The first 3 patches, handle 3 different types refs we might encounter.
These refs do not belong to the normal backref we are searching, and
hence need to be skipped.
This patch changes the total_refs to correct number so that we could
end loop as soon as we find all the refs we want.
btrfs send uses backref to find possible clone sources, the following
is a simple test to compare the results with and without this patch:
$ btrfs subvolume create /sub1
$ for i in `seq 1 163840`; do
dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct
done
$ btrfs subvolume snapshot /sub1 /sub2
$ for i in `seq 1 163840`; do
dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct
done
$ btrfs subvolume snapshot -r /sub1 /snap1
$ time btrfs send /snap1 | btrfs receive /volume2
Without this patch:
real 69m48.124s
user 0m50.199s
sys 70m15.600s
With this patch:
real 1m59.683s
user 0m35.421s
sys 2m42.684s
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
[ add patchset cover letter with background and numbers ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/backref.c | 29 +++++++++++------------------
1 file changed, 11 insertions(+), 18 deletions(-)
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -415,7 +415,7 @@ static int add_all_parents(struct btrfs_
struct ulist *parents,
struct preftrees *preftrees, struct prelim_ref *ref,
int level, u64 time_seq, const u64 *extent_item_pos,
- u64 total_refs, bool ignore_offset)
+ bool ignore_offset)
{
int ret = 0;
int slot;
@@ -457,7 +457,7 @@ static int add_all_parents(struct btrfs_
ret = btrfs_next_old_leaf(root, path, time_seq);
}
- while (!ret && count < total_refs) {
+ while (!ret && count < ref->count) {
eb = path->nodes[0];
slot = path->slots[0];
@@ -534,8 +534,7 @@ static int resolve_indirect_ref(struct b
struct btrfs_path *path, u64 time_seq,
struct preftrees *preftrees,
struct prelim_ref *ref, struct ulist *parents,
- const u64 *extent_item_pos, u64 total_refs,
- bool ignore_offset)
+ const u64 *extent_item_pos, bool ignore_offset)
{
struct btrfs_root *root;
struct btrfs_key root_key;
@@ -627,7 +626,7 @@ static int resolve_indirect_ref(struct b
}
ret = add_all_parents(root, path, parents, preftrees, ref, level,
- time_seq, extent_item_pos, total_refs, ignore_offset);
+ time_seq, extent_item_pos, ignore_offset);
out:
path->lowest_level = 0;
btrfs_release_path(path);
@@ -661,7 +660,7 @@ unode_aux_to_inode_list(struct ulist_nod
static int resolve_indirect_refs(struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 time_seq,
struct preftrees *preftrees,
- const u64 *extent_item_pos, u64 total_refs,
+ const u64 *extent_item_pos,
struct share_check *sc, bool ignore_offset)
{
int err;
@@ -707,7 +706,7 @@ static int resolve_indirect_refs(struct
}
err = resolve_indirect_ref(fs_info, path, time_seq, preftrees,
ref, parents, extent_item_pos,
- total_refs, ignore_offset);
+ ignore_offset);
/*
* we can only tolerate ENOENT,otherwise,we should catch error
* and return directly.
@@ -810,8 +809,7 @@ static int add_missing_keys(struct btrfs
*/
static int add_delayed_refs(const struct btrfs_fs_info *fs_info,
struct btrfs_delayed_ref_head *head, u64 seq,
- struct preftrees *preftrees, u64 *total_refs,
- struct share_check *sc)
+ struct preftrees *preftrees, struct share_check *sc)
{
struct btrfs_delayed_ref_node *node;
struct btrfs_delayed_extent_op *extent_op = head->extent_op;
@@ -845,7 +843,6 @@ static int add_delayed_refs(const struct
default:
BUG();
}
- *total_refs += count;
switch (node->type) {
case BTRFS_TREE_BLOCK_REF_KEY: {
/* NORMAL INDIRECT METADATA backref */
@@ -928,7 +925,7 @@ out:
static int add_inline_refs(const struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 bytenr,
int *info_level, struct preftrees *preftrees,
- u64 *total_refs, struct share_check *sc)
+ struct share_check *sc)
{
int ret = 0;
int slot;
@@ -952,7 +949,6 @@ static int add_inline_refs(const struct
ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item);
flags = btrfs_extent_flags(leaf, ei);
- *total_refs += btrfs_extent_refs(leaf, ei);
btrfs_item_key_to_cpu(leaf, &found_key, slot);
ptr = (unsigned long)(ei + 1);
@@ -1177,8 +1173,6 @@ static int find_parent_nodes(struct btrf
struct prelim_ref *ref;
struct rb_node *node;
struct extent_inode_elem *eie = NULL;
- /* total of both direct AND indirect refs! */
- u64 total_refs = 0;
struct preftrees preftrees = {
.direct = PREFTREE_INIT,
.indirect = PREFTREE_INIT,
@@ -1247,7 +1241,7 @@ again:
}
spin_unlock(&delayed_refs->lock);
ret = add_delayed_refs(fs_info, head, time_seq,
- &preftrees, &total_refs, sc);
+ &preftrees, sc);
mutex_unlock(&head->mutex);
if (ret)
goto out;
@@ -1268,8 +1262,7 @@ again:
(key.type == BTRFS_EXTENT_ITEM_KEY ||
key.type == BTRFS_METADATA_ITEM_KEY)) {
ret = add_inline_refs(fs_info, path, bytenr,
- &info_level, &preftrees,
- &total_refs, sc);
+ &info_level, &preftrees, sc);
if (ret)
goto out;
ret = add_keyed_refs(fs_info, path, bytenr, info_level,
@@ -1288,7 +1281,7 @@ again:
WARN_ON(!RB_EMPTY_ROOT(&preftrees.indirect_missing_keys.root.rb_root));
ret = resolve_indirect_refs(fs_info, path, time_seq, &preftrees,
- extent_item_pos, total_refs, sc, ignore_offset);
+ extent_item_pos, sc, ignore_offset);
if (ret)
goto out;
From: ethanwu <[email protected]>
commit ed58f2e66e849c34826083e5a6c1b506ee8a4d8e upstream.
All references from the block of SHARED_DATA_REF belong to that shared
block backref.
For example:
item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95
extent refs 24 gen 7302 flags DATA
extent data backref root 257 objectid 260 offset 65536 count 5
extent data backref root 258 objectid 265 offset 0 count 9
shared data backref parent 394985472 count 10
Block 394985472 might be leaf from root 257, and the item obejctid and
(file_pos - file_extent_item::offset) in that leaf just happens to be
260 and 65536 which is equal to the first extent data backref entry.
Before this patch, when we resolve backref:
root 257 objectid 260 offset 65536
we will add those refs in block 394985472 and wrongly treat those as the
refs we want.
Fix this by checking if the leaf we are processing is shared data
backref, if so, just skip this leaf.
Shared data refs added into preftrees.direct have all entry value = 0
(root_id = 0, key = NULL, level = 0) except parent entry.
Other refs from indirect tree will have key value and root id != 0, and
these values won't be changed when their parent is resolved and added to
preftrees.direct. Therefore, we could reuse the preftrees.direct and
search ref with all values = 0 except parent is set to avoid getting
those resolved refs block.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/backref.c | 61 +++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 52 insertions(+), 9 deletions(-)
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -386,8 +386,34 @@ static int add_indirect_ref(const struct
wanted_disk_byte, count, sc, gfp_mask);
}
+static int is_shared_data_backref(struct preftrees *preftrees, u64 bytenr)
+{
+ struct rb_node **p = &preftrees->direct.root.rb_root.rb_node;
+ struct rb_node *parent = NULL;
+ struct prelim_ref *ref = NULL;
+ struct prelim_ref target = {0};
+ int result;
+
+ target.parent = bytenr;
+
+ while (*p) {
+ parent = *p;
+ ref = rb_entry(parent, struct prelim_ref, rbnode);
+ result = prelim_ref_compare(ref, &target);
+
+ if (result < 0)
+ p = &(*p)->rb_left;
+ else if (result > 0)
+ p = &(*p)->rb_right;
+ else
+ return 1;
+ }
+ return 0;
+}
+
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
- struct ulist *parents, struct prelim_ref *ref,
+ struct ulist *parents,
+ struct preftrees *preftrees, struct prelim_ref *ref,
int level, u64 time_seq, const u64 *extent_item_pos,
u64 total_refs, bool ignore_offset)
{
@@ -412,11 +438,16 @@ static int add_all_parents(struct btrfs_
}
/*
- * We normally enter this function with the path already pointing to
- * the first item to check. But sometimes, we may enter it with
- * slot==nritems. In that case, go to the next leaf before we continue.
+ * 1. We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot == nritems.
+ * 2. We are searching for normal backref but bytenr of this leaf
+ * matches shared data backref
+ * For these cases, go to the next leaf before we continue.
*/
- if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
+ eb = path->nodes[0];
+ if (path->slots[0] >= btrfs_header_nritems(eb) ||
+ is_shared_data_backref(preftrees, eb->start)) {
if (time_seq == SEQ_LAST)
ret = btrfs_next_leaf(root, path);
else
@@ -433,6 +464,17 @@ static int add_all_parents(struct btrfs_
key.type != BTRFS_EXTENT_DATA_KEY)
break;
+ /*
+ * We are searching for normal backref but bytenr of this leaf
+ * matches shared data backref.
+ */
+ if (slot == 0 && is_shared_data_backref(preftrees, eb->start)) {
+ if (time_seq == SEQ_LAST)
+ ret = btrfs_next_leaf(root, path);
+ else
+ ret = btrfs_next_old_leaf(root, path, time_seq);
+ continue;
+ }
fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
data_offset = btrfs_file_extent_offset(eb, fi);
@@ -484,6 +526,7 @@ next:
*/
static int resolve_indirect_ref(struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 time_seq,
+ struct preftrees *preftrees,
struct prelim_ref *ref, struct ulist *parents,
const u64 *extent_item_pos, u64 total_refs,
bool ignore_offset)
@@ -577,8 +620,8 @@ static int resolve_indirect_ref(struct b
eb = path->nodes[level];
}
- ret = add_all_parents(root, path, parents, ref, level, time_seq,
- extent_item_pos, total_refs, ignore_offset);
+ ret = add_all_parents(root, path, parents, preftrees, ref, level,
+ time_seq, extent_item_pos, total_refs, ignore_offset);
out:
path->lowest_level = 0;
btrfs_release_path(path);
@@ -656,8 +699,8 @@ static int resolve_indirect_refs(struct
ret = BACKREF_FOUND_SHARED;
goto out;
}
- err = resolve_indirect_ref(fs_info, path, time_seq, ref,
- parents, extent_item_pos,
+ err = resolve_indirect_ref(fs_info, path, time_seq, preftrees,
+ ref, parents, extent_item_pos,
total_refs, ignore_offset);
/*
* we can only tolerate ENOENT,otherwise,we should catch error
From: Hans de Goede <[email protected]>
[ Upstream commit 46c54cf2706122c37497896d56d67b0c0aca2ede ]
The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen,
with the X and Y coordinates swapped compared to the LCD panel.
Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y"
device-property to the i2c-client instantiated for this device before
the driver binds.
This is the first entry of a Goodix touchscreen to touchscreen_dmi.c,
so far DMI quirks for Goodix touchscreen's have been added directly
to drivers/input/touchscreen/goodix.c. Currently there are 3
DMI tables in goodix.c:
1. rotated_screen[] for devices where the touchscreen is rotated
180 degrees vs the LCD panel
2. inverted_x_screen[] for devices where the X axis is inverted
3. nine_bytes_report[] for devices which use a non standard touch
report size
Arguably only 3. really needs to be inside the driver and the other
2 cases are better handled through the generic touchscreen DMI quirk
mechanism from touchscreen_dmi.c, which allows adding device-props to
any i2c-client. Esp. now that goodix.c is using the generic
touchscreen_properties code.
Alternative to the approach from this patch we could add a 4th
dmi_system_id table for devices with swapped-x-y axis to goodix.c,
but that seems undesirable.
Cc: Bastien Nocera <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 1e072dbba30d6..7ed1189a7200c 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -231,6 +231,16 @@ static const struct ts_dmi_data digma_citi_e200_data = {
.properties = digma_citi_e200_props,
};
+static const struct property_entry estar_beauty_hd_props[] = {
+ PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+ { }
+};
+
+static const struct ts_dmi_data estar_beauty_hd_data = {
+ .acpi_name = "GDIX1001:00",
+ .properties = estar_beauty_hd_props,
+};
+
static const struct property_entry gp_electronic_t701_props[] = {
PROPERTY_ENTRY_U32("touchscreen-size-x", 960),
PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
@@ -747,6 +757,14 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
},
},
+ {
+ /* Estar Beauty HD (MID 7316R) */
+ .driver_data = (void *)&estar_beauty_hd_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+ },
+ },
{
/* GP-electronic T701 */
.driver_data = (void *)&gp_electronic_t701_data,
--
2.27.0
From: Javed Hasan <[email protected]>
[ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ]
A race condition exists between the response handler getting called because
of exchange_mgr_reset() (which clears out all the active XIDs) and the
response we get via an interrupt.
Sequence of events:
rport ba0200: Port timeout, state PLOGI
rport ba0200: Port entered PLOGI state from PLOGI state
xid 1052: Exchange timer armed : 20000 msecs xid timer armed here
rport ba0200: Received LOGO request while in state PLOGI
rport ba0200: Delete port
rport ba0200: work event 3
rport ba0200: lld callback ev 3
bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200
bnx2fc: ba0200 - rport not created Yet!!
/* Here we reset any outstanding exchanges before
freeing rport using the exch_mgr_reset() */
xid 1052: Exchange timer canceled
/* Here we got two responses for one xid */
xid 1052: invoking resp(), esb 20000000 state 3
xid 1052: invoking resp(), esb 20000000 state 3
xid 1052: fc_rport_plogi_resp() : ep->resp_active 2
xid 1052: fc_rport_plogi_resp() : ep->resp_active 2
Skip the response if the exchange is already completed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libfc/fc_exch.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 52e8666598531..e5b18e5d46dac 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1619,8 +1619,13 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
rc = fc_exch_done_locked(ep);
WARN_ON(fc_seq_exch(sp) != ep);
spin_unlock_bh(&ep->ex_lock);
- if (!rc)
+ if (!rc) {
fc_exch_delete(ep);
+ } else {
+ FC_EXCH_DBG(ep, "ep is completed already,"
+ "hence skip calling the resp\n");
+ goto skip_resp;
+ }
}
/*
@@ -1639,6 +1644,7 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
if (!fc_invoke_resp(ep, sp, fp))
fc_frame_free(fp);
+skip_resp:
fc_exch_release(ep);
return;
rel:
@@ -1895,10 +1901,16 @@ static void fc_exch_reset(struct fc_exch *ep)
fc_exch_hold(ep);
- if (!rc)
+ if (!rc) {
fc_exch_delete(ep);
+ } else {
+ FC_EXCH_DBG(ep, "ep is completed already,"
+ "hence skip calling the resp\n");
+ goto skip_resp;
+ }
fc_invoke_resp(ep, sp, ERR_PTR(-FC_EX_CLOSED));
+skip_resp:
fc_seq_set_resp(sp, NULL, ep->arg);
fc_exch_release(ep);
}
--
2.27.0
From: ethanwu <[email protected]>
commit 7ac8b88ee668a5b4743ebf3e9888fabac85c334a upstream.
When resolving one backref of type EXTENT_DATA_REF, we collect all
references that simply reference the EXTENT_ITEM even though their
(file_pos - file_extent_item::offset) are not the same as the
btrfs_extent_data_ref::offset we are searching for.
This patch adds additional check so that we only collect references whose
(file_pos - file_extent_item::offset) == btrfs_extent_data_ref::offset.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/backref.c | 63 +++++++++++++++++++++++++++--------------------------
1 file changed, 33 insertions(+), 30 deletions(-)
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -347,33 +347,10 @@ static int add_prelim_ref(const struct b
return -ENOMEM;
ref->root_id = root_id;
- if (key) {
+ if (key)
ref->key_for_search = *key;
- /*
- * We can often find data backrefs with an offset that is too
- * large (>= LLONG_MAX, maximum allowed file offset) due to
- * underflows when subtracting a file's offset with the data
- * offset of its corresponding extent data item. This can
- * happen for example in the clone ioctl.
- * So if we detect such case we set the search key's offset to
- * zero to make sure we will find the matching file extent item
- * at add_all_parents(), otherwise we will miss it because the
- * offset taken form the backref is much larger then the offset
- * of the file extent item. This can make us scan a very large
- * number of file extent items, but at least it will not make
- * us miss any.
- * This is an ugly workaround for a behaviour that should have
- * never existed, but it does and a fix for the clone ioctl
- * would touch a lot of places, cause backwards incompatibility
- * and would not fix the problem for extents cloned with older
- * kernels.
- */
- if (ref->key_for_search.type == BTRFS_EXTENT_DATA_KEY &&
- ref->key_for_search.offset >= LLONG_MAX)
- ref->key_for_search.offset = 0;
- } else {
+ else
memset(&ref->key_for_search, 0, sizeof(ref->key_for_search));
- }
ref->inode_list = NULL;
ref->level = level;
@@ -424,6 +401,7 @@ static int add_all_parents(struct btrfs_
u64 disk_byte;
u64 wanted_disk_byte = ref->wanted_disk_byte;
u64 count = 0;
+ u64 data_offset;
if (level != 0) {
eb = path->nodes[level];
@@ -457,11 +435,15 @@ static int add_all_parents(struct btrfs_
fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+ data_offset = btrfs_file_extent_offset(eb, fi);
if (disk_byte == wanted_disk_byte) {
eie = NULL;
old = NULL;
- count++;
+ if (ref->key_for_search.offset == key.offset - data_offset)
+ count++;
+ else
+ goto next;
if (extent_item_pos) {
ret = check_extent_in_eb(&key, eb, fi,
*extent_item_pos,
@@ -513,6 +495,7 @@ static int resolve_indirect_ref(struct b
int root_level;
int level = ref->level;
int index;
+ struct btrfs_key search_key = ref->key_for_search;
root_key.objectid = ref->root_id;
root_key.type = BTRFS_ROOT_ITEM_KEY;
@@ -545,13 +528,33 @@ static int resolve_indirect_ref(struct b
goto out;
}
+ /*
+ * We can often find data backrefs with an offset that is too large
+ * (>= LLONG_MAX, maximum allowed file offset) due to underflows when
+ * subtracting a file's offset with the data offset of its
+ * corresponding extent data item. This can happen for example in the
+ * clone ioctl.
+ *
+ * So if we detect such case we set the search key's offset to zero to
+ * make sure we will find the matching file extent item at
+ * add_all_parents(), otherwise we will miss it because the offset
+ * taken form the backref is much larger then the offset of the file
+ * extent item. This can make us scan a very large number of file
+ * extent items, but at least it will not make us miss any.
+ *
+ * This is an ugly workaround for a behaviour that should have never
+ * existed, but it does and a fix for the clone ioctl would touch a lot
+ * of places, cause backwards incompatibility and would not fix the
+ * problem for extents cloned with older kernels.
+ */
+ if (search_key.type == BTRFS_EXTENT_DATA_KEY &&
+ search_key.offset >= LLONG_MAX)
+ search_key.offset = 0;
path->lowest_level = level;
if (time_seq == SEQ_LAST)
- ret = btrfs_search_slot(NULL, root, &ref->key_for_search, path,
- 0, 0);
+ ret = btrfs_search_slot(NULL, root, &search_key, path, 0, 0);
else
- ret = btrfs_search_old_slot(root, &ref->key_for_search, path,
- time_seq);
+ ret = btrfs_search_old_slot(root, &search_key, path, time_seq);
/* root node has been locked, we can release @subvol_srcu safely here */
srcu_read_unlock(&fs_info->subvol_srcu, index);
From: Bing Guo <[email protected]>
[ Upstream commit 4716a7c50c5c66d6ddc42401e1e0ba13b492e105 ]
Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.
How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Bing Guo <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Anson Jacob <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 959eb075d11ed..c18f39271b034 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1914,6 +1914,9 @@ static bool decide_dp_link_settings(struct dc_link *link, struct dc_link_setting
initial_link_setting;
uint32_t link_bw;
+ if (req_bw > dc_link_bandwidth_kbps(link, &link->verified_link_cap))
+ return false;
+
/* search for the minimum link setting that:
* 1. is supported according to the link training result
* 2. could support the b/w requested by the timing
--
2.27.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit ac687e6e8c26181a33270efd1a2e2241377924b0 ]
There is a need to distinguish geniune per-cpu kthreads from kthreads
that happen to have a single CPU affinity.
Geniune per-cpu kthreads are kthreads that are CPU affine for
correctness, these will obviously have PF_KTHREAD set, but must also
have PF_NO_SETAFFINITY set, lest userspace modify their affinity and
ruins things.
However, these two things are not sufficient, PF_NO_SETAFFINITY is
also set on other tasks that have their affinities controlled through
other means, like for instance workqueues.
Therefore another bit is needed; it turns out kthread_create_per_cpu()
already has such a bit: KTHREAD_IS_PER_CPU, which is used to make
kthread_park()/kthread_unpark() work correctly.
Expose this flag and remove the implicit setting of it from
kthread_create_on_cpu(); the io_uring usage of it seems dubious at
best.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/kthread.h | 3 +++
kernel/kthread.c | 27 ++++++++++++++++++++++++++-
kernel/smpboot.c | 1 +
3 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 0f9da966934e2..c7108ce5a051c 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -31,6 +31,9 @@ struct task_struct *kthread_create_on_cpu(int (*threadfn)(void *data),
unsigned int cpu,
const char *namefmt);
+void kthread_set_per_cpu(struct task_struct *k, int cpu);
+bool kthread_is_per_cpu(struct task_struct *k);
+
/**
* kthread_run - create and wake a thread.
* @threadfn: the function to run until signal_pending(current).
diff --git a/kernel/kthread.c b/kernel/kthread.c
index e51f0006057df..1d4c98a19043f 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -469,11 +469,36 @@ struct task_struct *kthread_create_on_cpu(int (*threadfn)(void *data),
return p;
kthread_bind(p, cpu);
/* CPU hotplug need to bind once again when unparking the thread. */
- set_bit(KTHREAD_IS_PER_CPU, &to_kthread(p)->flags);
to_kthread(p)->cpu = cpu;
return p;
}
+void kthread_set_per_cpu(struct task_struct *k, int cpu)
+{
+ struct kthread *kthread = to_kthread(k);
+ if (!kthread)
+ return;
+
+ WARN_ON_ONCE(!(k->flags & PF_NO_SETAFFINITY));
+
+ if (cpu < 0) {
+ clear_bit(KTHREAD_IS_PER_CPU, &kthread->flags);
+ return;
+ }
+
+ kthread->cpu = cpu;
+ set_bit(KTHREAD_IS_PER_CPU, &kthread->flags);
+}
+
+bool kthread_is_per_cpu(struct task_struct *k)
+{
+ struct kthread *kthread = to_kthread(k);
+ if (!kthread)
+ return false;
+
+ return test_bit(KTHREAD_IS_PER_CPU, &kthread->flags);
+}
+
/**
* kthread_unpark - unpark a thread created by kthread_create().
* @k: thread created by kthread_create().
diff --git a/kernel/smpboot.c b/kernel/smpboot.c
index 2efe1e206167c..f25208e8df836 100644
--- a/kernel/smpboot.c
+++ b/kernel/smpboot.c
@@ -188,6 +188,7 @@ __smpboot_create_thread(struct smp_hotplug_thread *ht, unsigned int cpu)
kfree(td);
return PTR_ERR(tsk);
}
+ kthread_set_per_cpu(tsk, cpu);
/*
* Park the thread so that it could start right on the CPU
* when it is available.
--
2.27.0
From: Enke Chen <[email protected]>
commit 344db93ae3ee69fc137bd6ed89a8ff1bf5b0db08 upstream.
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.
In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.
This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e431d ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").
Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <[email protected]>
Reviewed-by: Neal Cardwell <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 1 +
net/ipv4/tcp_input.c | 1 +
net/ipv4/tcp_output.c | 2 ++
net/ipv4/tcp_timer.c | 18 ++++++++++++++++++
4 files changed, 22 insertions(+)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -619,6 +619,7 @@ static inline void tcp_clear_xmit_timers
unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu);
unsigned int tcp_current_mss(struct sock *sk);
+u32 tcp_clamp_probe0_to_user_timeout(const struct sock *sk, u32 when);
/* Bound MSS / TSO packet size with the half of the window */
static inline int tcp_bound_to_half_wnd(struct tcp_sock *tp, int pktsize)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3295,6 +3295,7 @@ static void tcp_ack_probe(struct sock *s
} else {
unsigned long when = tcp_probe0_when(sk, TCP_RTO_MAX);
+ when = tcp_clamp_probe0_to_user_timeout(sk, when);
tcp_reset_xmit_timer(sk, ICSK_TIME_PROBE0,
when, TCP_RTO_MAX, NULL);
}
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3850,6 +3850,8 @@ void tcp_send_probe0(struct sock *sk)
*/
timeout = TCP_RESOURCE_PROBE_INTERVAL;
}
+
+ timeout = tcp_clamp_probe0_to_user_timeout(sk, timeout);
tcp_reset_xmit_timer(sk, ICSK_TIME_PROBE0, timeout, TCP_RTO_MAX, NULL);
}
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -40,6 +40,24 @@ static u32 tcp_clamp_rto_to_user_timeout
return min_t(u32, icsk->icsk_rto, msecs_to_jiffies(remaining));
}
+u32 tcp_clamp_probe0_to_user_timeout(const struct sock *sk, u32 when)
+{
+ struct inet_connection_sock *icsk = inet_csk(sk);
+ u32 remaining;
+ s32 elapsed;
+
+ if (!icsk->icsk_user_timeout || !icsk->icsk_probes_tstamp)
+ return when;
+
+ elapsed = tcp_jiffies32 - icsk->icsk_probes_tstamp;
+ if (unlikely(elapsed < 0))
+ elapsed = 0;
+ remaining = msecs_to_jiffies(icsk->icsk_user_timeout) - elapsed;
+ remaining = max_t(u32, remaining, TCP_TIMEOUT_MIN);
+
+ return min_t(u32, remaining, when);
+}
+
/**
* tcp_write_err() - close socket and save error info
* @sk: The socket the error has appeared on.
From: Peter Zijlstra <[email protected]>
[ Upstream commit 640f17c82460e9724fd256f0a1f5d99e7ff0bda4 ]
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Tested-by: Valentin Schneider <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/workqueue.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 28e52657e0930..29c36c0290623 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1847,12 +1847,6 @@ static void worker_attach_to_pool(struct worker *worker,
{
mutex_lock(&wq_pool_attach_mutex);
- /*
- * set_cpus_allowed_ptr() will fail if the cpumask doesn't have any
- * online CPUs. It'll be re-applied when any of the CPUs come up.
- */
- set_cpus_allowed_ptr(worker->task, pool->attrs->cpumask);
-
/*
* The wq_pool_attach_mutex ensures %POOL_DISASSOCIATED remains
* stable across this function. See the comments above the flag
@@ -1861,6 +1855,9 @@ static void worker_attach_to_pool(struct worker *worker,
if (pool->flags & POOL_DISASSOCIATED)
worker->flags |= WORKER_UNBOUND;
+ if (worker->rescue_wq)
+ set_cpus_allowed_ptr(worker->task, pool->attrs->cpumask);
+
list_add_tail(&worker->node, &pool->workers);
worker->pool = pool;
--
2.27.0
From: Lijun Pan <[email protected]>
commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream.
Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -4752,6 +4752,12 @@ static void ibmvnic_tasklet(void *data)
while (!done) {
/* Pull all the valid messages off the CRQ */
while ((crq = ibmvnic_next_crq(adapter)) != NULL) {
+ /* This barrier makes sure ibmvnic_next_crq()'s
+ * crq->generic.first & IBMVNIC_CRQ_CMD_RSP is loaded
+ * before ibmvnic_handle_crq()'s
+ * switch(gen_crq->first) and switch(gen_crq->cmd).
+ */
+ dma_rmb();
ibmvnic_handle_crq(crq, adapter);
crq->generic.first = 0;
}
From: Kai-Heng Feng <[email protected]>
[ Upstream commit bcd7059abc19e6ec5b2260dff6a008fb99c4eef9 ]
Instead of queueing jackpoll_work, runtime resume the codec to let it
use different jack detection methods based on jackpoll_interval.
This partially matches SOF driver's behavior with commit a6e7d0a4bdb0
("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the
difference is SOF unconditionally resumes the codec.
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-codec.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index 9e8233c10d860..df38616c431a6 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -68,8 +68,7 @@ void hda_codec_jack_check(struct snd_sof_dev *sdev)
* has been recorded in STATESTS
*/
if (codec->jacktbl.used)
- schedule_delayed_work(&codec->jackpoll_work,
- codec->jackpoll_interval);
+ pm_request_resume(&codec->core.dev);
}
#else
void hda_codec_jack_wake_enable(struct snd_sof_dev *sdev) {}
--
2.27.0
From: Arnold Gozum <[email protected]>
[ Upstream commit fcd38f178b785623c0325958225744f0d8a075c0 ]
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook".
Add this model to the dmi_switches_allow_list.
Signed-off-by: Arnold Gozum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/intel-vbtn.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 37035dca469cf..d4fc2cbf78703 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -203,6 +203,12 @@ static const struct dmi_system_id dmi_switches_allow_list[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"),
+ },
+ },
{} /* Array terminator */
};
--
2.27.0
From: Felix Fietkau <[email protected]>
[ Upstream commit 622d3b4e39381262da7b18ca1ed1311df227de86 ]
When using WEP, the default unicast key needs to be selected, instead of
the STA PTK.
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 3ab85e1e38d82..1a15e7bae106a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4080,6 +4080,8 @@ void ieee80211_check_fast_rx(struct sta_info *sta)
rcu_read_lock();
key = rcu_dereference(sta->ptk[sta->ptk_idx]);
+ if (!key)
+ key = rcu_dereference(sdata->default_unicast_key);
if (key) {
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_TKIP:
--
2.27.0
From: Jake Wang <[email protected]>
[ Upstream commit 901c1ec05ef277ce9d43cb806a225b28b3efe89a ]
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index bb7add5ea2273..a6d5beada6634 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -257,7 +257,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
.num_banks = 8,
.num_chans = 4,
.vmm_page_size_bytes = 4096,
- .dram_clock_change_latency_us = 23.84,
+ .dram_clock_change_latency_us = 11.72,
.return_bus_width_bytes = 64,
.dispclk_dppclk_vco_speed_mhz = 3600,
.xfc_bus_transport_time_us = 4,
--
2.27.0
On Fri, Feb 05, 2021 at 03:07:15PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.96 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.96-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my system(x86_64).
No dmesg regressions so far.
Tested-by: Igor Matheus Andrade Torrente <[email protected]>
Best regards
---
Igor Matheus Andrade Torrente
> -------------
> Pseudo-Shortlog of commits:
>
> Greg Kroah-Hartman <[email protected]>
> Linux 5.4.96-rc1
>
> Peter Zijlstra <[email protected]>
> workqueue: Restrict affinity change to rescuer
>
> Peter Zijlstra <[email protected]>
> kthread: Extract KTHREAD_IS_PER_CPU
>
> Josh Poimboeuf <[email protected]>
> objtool: Don't fail on missing symbol table
>
> Bing Guo <[email protected]>
> drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
>
> Jake Wang <[email protected]>
> drm/amd/display: Update dram_clock_change_latency for DCN2.1
>
> Michael Ellerman <[email protected]>
> selftests/powerpc: Only test lwm/stmw on big endian
>
> Revanth Rajashekar <[email protected]>
> nvme: check the PRINFO bit before deciding the host buffer length
>
> lianzhi chang <[email protected]>
> udf: fix the problem that the disc content is not displayed
>
> Kai-Chuan Hsieh <[email protected]>
> ALSA: hda: Add Cometlake-R PCI ID
>
> Brian King <[email protected]>
> scsi: ibmvfc: Set default timeout to avoid crash during migration
>
> Felix Fietkau <[email protected]>
> mac80211: fix fast-rx encryption check
>
> Kai-Heng Feng <[email protected]>
> ASoC: SOF: Intel: hda: Resume codec to do jack detection
>
> Dinghao Liu <[email protected]>
> scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
>
> Javed Hasan <[email protected]>
> scsi: libfc: Avoid invoking response handler twice if ep is already completed
>
> Martin Wilck <[email protected]>
> scsi: scsi_transport_srp: Don't block target in failfast state
>
> Peter Zijlstra <[email protected]>
> x86: __always_inline __{rd,wr}msr()
>
> Arnold Gozum <[email protected]>
> platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
>
> Hans de Goede <[email protected]>
> platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
>
> Tony Lindgren <[email protected]>
> phy: cpcap-usb: Fix warning for missing regulator_disable
>
> Eric Dumazet <[email protected]>
> net_sched: gen_estimator: support large ewma log
>
> ethanwu <[email protected]>
> btrfs: backref, use correct count to resolve normal data refs
>
> ethanwu <[email protected]>
> btrfs: backref, only search backref entries from leaves of the same root
>
> ethanwu <[email protected]>
> btrfs: backref, don't add refs from shared block when resolving normal backref
>
> ethanwu <[email protected]>
> btrfs: backref, only collect file extent items matching backref offset
>
> Enke Chen <[email protected]>
> tcp: make TCP_USER_TIMEOUT accurate for zero window probes
>
> Catalin Marinas <[email protected]>
> arm64: Do not pass tagged addresses to __is_lm_address()
>
> Vincenzo Frascino <[email protected]>
> arm64: Fix kernel address detection of __is_lm_address()
>
> Rafael J. Wysocki <[email protected]>
> ACPI: thermal: Do not call acpi_thermal_check() directly
>
> Greg Kroah-Hartman <[email protected]>
> Revert "Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT""
>
> Lijun Pan <[email protected]>
> ibmvnic: Ensure that CRQ entry read are correctly ordered
>
> Rasmus Villemoes <[email protected]>
> net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
>
> Pan Bian <[email protected]>
> net: dsa: bcm_sf2: put device node before return
>
>
> -------------
>
> Diffstat:
>
> Makefile | 4 +-
> arch/arm64/include/asm/memory.h | 10 +-
> arch/arm64/mm/physaddr.c | 2 +-
> arch/x86/include/asm/msr.h | 4 +-
> block/blk-core.c | 11 +-
> drivers/acpi/thermal.c | 55 +++++---
> drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +
> .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
> drivers/net/dsa/bcm_sf2.c | 8 +-
> drivers/net/ethernet/ibm/ibmvnic.c | 6 +
> drivers/nvme/host/core.c | 17 ++-
> drivers/phy/motorola/phy-cpcap-usb.c | 19 ++-
> drivers/platform/x86/intel-vbtn.c | 6 +
> drivers/platform/x86/touchscreen_dmi.c | 18 +++
> drivers/scsi/fnic/vnic_dev.c | 8 +-
> drivers/scsi/ibmvscsi/ibmvfc.c | 4 +-
> drivers/scsi/libfc/fc_exch.c | 16 ++-
> drivers/scsi/scsi_transport_srp.c | 9 +-
> fs/btrfs/backref.c | 157 +++++++++++++--------
> fs/udf/super.c | 7 +-
> include/linux/kthread.h | 3 +
> include/net/tcp.h | 1 +
> kernel/kthread.c | 27 +++-
> kernel/smpboot.c | 1 +
> kernel/workqueue.c | 9 +-
> net/core/gen_estimator.c | 11 +-
> net/ipv4/tcp_input.c | 1 +
> net/ipv4/tcp_output.c | 2 +
> net/ipv4/tcp_timer.c | 18 +++
> net/mac80211/rx.c | 2 +
> net/switchdev/switchdev.c | 23 +--
> sound/pci/hda/hda_intel.c | 3 +
> sound/soc/sof/intel/hda-codec.c | 3 +-
> tools/objtool/elf.c | 7 +-
> .../powerpc/alignment/alignment_handler.c | 5 +-
> 35 files changed, 348 insertions(+), 134 deletions(-)
>
>
On 2/5/21 6:07 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.96 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.96-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Tested-by: Florian Fainelli <[email protected]>
On ARCH_BRCMSTB with both ARM 32-bit and ARM 64-bit configurations, no
regressions observed.
--
Florian
From: Martin Wilck <[email protected]>
[ Upstream commit 72eeb7c7151302ef007f1acd018cbf6f30e50321 ]
If the port is in SRP_RPORT_FAIL_FAST state when srp_reconnect_rport() is
entered, a transition to SDEV_BLOCK would be illegal, and a kernel WARNING
would be triggered. Skip scsi_target_block() in this case.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_transport_srp.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index d4d1104fac991..8cd0a87764dfd 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -541,7 +541,14 @@ int srp_reconnect_rport(struct srp_rport *rport)
res = mutex_lock_interruptible(&rport->mutex);
if (res)
goto out;
- scsi_target_block(&shost->shost_gendev);
+ if (rport->state != SRP_RPORT_FAIL_FAST)
+ /*
+ * sdev state must be SDEV_TRANSPORT_OFFLINE, transition
+ * to SDEV_BLOCK is illegal. Calling scsi_target_unblock()
+ * later is ok though, scsi_internal_device_unblock_nowait()
+ * treats SDEV_TRANSPORT_OFFLINE like SDEV_BLOCK.
+ */
+ scsi_target_block(&shost->shost_gendev);
res = rport->state != SRP_RPORT_LOST ? i->f->reconnect(rport) : -ENODEV;
pr_debug("%s (state %d): transport.reconnect() returned %d\n",
dev_name(&shost->shost_gendev), rport->state, res);
--
2.27.0
From: Rafael J. Wysocki <[email protected]>
commit 81b704d3e4674e09781d331df73d76675d5ad8cb upstream.
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782e4
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <[email protected]>
Diagnosed-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Stephen Berman <[email protected]>
Cc: All applicable <[email protected]>
[bigeasy: Backported to v5.4.y]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/thermal.c | 55 +++++++++++++++++++++++++++++++++----------------
1 file changed, 38 insertions(+), 17 deletions(-)
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -174,6 +174,8 @@ struct acpi_thermal {
int tz_enabled;
int kelvin_offset;
struct work_struct thermal_check_work;
+ struct mutex thermal_check_lock;
+ refcount_t thermal_check_count;
};
/* --------------------------------------------------------------------------
@@ -494,17 +496,6 @@ static int acpi_thermal_get_trip_points(
return 0;
}
-static void acpi_thermal_check(void *data)
-{
- struct acpi_thermal *tz = data;
-
- if (!tz->tz_enabled)
- return;
-
- thermal_zone_device_update(tz->thermal_zone,
- THERMAL_EVENT_UNSPECIFIED);
-}
-
/* sys I/F for generic thermal sysfs support */
static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
@@ -538,6 +529,8 @@ static int thermal_get_mode(struct therm
return 0;
}
+static void acpi_thermal_check_fn(struct work_struct *work);
+
static int thermal_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
@@ -563,7 +556,7 @@ static int thermal_set_mode(struct therm
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"%s kernel ACPI thermal control\n",
tz->tz_enabled ? "Enable" : "Disable"));
- acpi_thermal_check(tz);
+ acpi_thermal_check_fn(&tz->thermal_check_work);
}
return 0;
}
@@ -932,6 +925,12 @@ static void acpi_thermal_unregister_ther
Driver Interface
-------------------------------------------------------------------------- */
+static void acpi_queue_thermal_check(struct acpi_thermal *tz)
+{
+ if (!work_pending(&tz->thermal_check_work))
+ queue_work(acpi_thermal_pm_queue, &tz->thermal_check_work);
+}
+
static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
struct acpi_thermal *tz = acpi_driver_data(device);
@@ -942,17 +941,17 @@ static void acpi_thermal_notify(struct a
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
- acpi_thermal_check(tz);
+ acpi_queue_thermal_check(tz);
break;
case ACPI_THERMAL_NOTIFY_THRESHOLDS:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
- acpi_thermal_check(tz);
+ acpi_queue_thermal_check(tz);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
- acpi_thermal_check(tz);
+ acpi_queue_thermal_check(tz);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
@@ -1052,7 +1051,27 @@ static void acpi_thermal_check_fn(struct
{
struct acpi_thermal *tz = container_of(work, struct acpi_thermal,
thermal_check_work);
- acpi_thermal_check(tz);
+
+ if (!tz->tz_enabled)
+ return;
+ /*
+ * In general, it is not sufficient to check the pending bit, because
+ * subsequent instances of this function may be queued after one of them
+ * has started running (e.g. if _TMP sleeps). Avoid bailing out if just
+ * one of them is running, though, because it may have done the actual
+ * check some time ago, so allow at least one of them to block on the
+ * mutex while another one is running the update.
+ */
+ if (!refcount_dec_not_one(&tz->thermal_check_count))
+ return;
+
+ mutex_lock(&tz->thermal_check_lock);
+
+ thermal_zone_device_update(tz->thermal_zone, THERMAL_EVENT_UNSPECIFIED);
+
+ refcount_inc(&tz->thermal_check_count);
+
+ mutex_unlock(&tz->thermal_check_lock);
}
static int acpi_thermal_add(struct acpi_device *device)
@@ -1084,6 +1103,8 @@ static int acpi_thermal_add(struct acpi_
if (result)
goto free_memory;
+ refcount_set(&tz->thermal_check_count, 3);
+ mutex_init(&tz->thermal_check_lock);
INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
@@ -1149,7 +1170,7 @@ static int acpi_thermal_resume(struct de
tz->state.active |= tz->trips.active[i].flags.enabled;
}
- queue_work(acpi_thermal_pm_queue, &tz->thermal_check_work);
+ acpi_queue_thermal_check(tz);
return AE_OK;
}
From: Peter Zijlstra <[email protected]>
[ Upstream commit 66a425011c61e71560c234492d204e83cfb73d1d ]
When the compiler choses to not inline the trivial MSR helpers:
vmlinux.o: warning: objtool: __sev_es_nmi_complete()+0xce: call to __wrmsr.constprop.14() leaves .noinstr.text section
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Randy Dunlap <[email protected]> # build-tested
Link: https://lore.kernel.org/r/X/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/msr.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 86f20d520a079..b40d0295d8129 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -88,7 +88,7 @@ static inline void do_trace_rdpmc(unsigned int msr, u64 val, int failed) {}
* think of extending them - you will be slapped with a stinking trout or a frozen
* shark will reach you, wherever you are! You've been warned.
*/
-static inline unsigned long long notrace __rdmsr(unsigned int msr)
+static __always_inline unsigned long long __rdmsr(unsigned int msr)
{
DECLARE_ARGS(val, low, high);
@@ -100,7 +100,7 @@ static inline unsigned long long notrace __rdmsr(unsigned int msr)
return EAX_EDX_VAL(val, low, high);
}
-static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
+static __always_inline void __wrmsr(unsigned int msr, u32 low, u32 high)
{
asm volatile("1: wrmsr\n"
"2:\n"
--
2.27.0
From: Eric Dumazet <[email protected]>
commit dd5e073381f2ada3630f36be42833c6e9c78b75e upstream
syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.
tc qdisc replace dev xxx root est 1sec 131072sec ...
While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.
UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
expire_timers kernel/time/timer.c:1462 [inline]
__run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
__run_timers kernel/time/timer.c:1712 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
__do_softirq+0x2bc/0xa77 kernel/softirq.c:343
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:226 [inline]
__irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/gen_estimator.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -80,11 +80,11 @@ static void est_timer(struct timer_list
u64 rate, brate;
est_fetch_counters(est, &b);
- brate = (b.bytes - est->last_bytes) << (10 - est->ewma_log - est->intvl_log);
- brate -= (est->avbps >> est->ewma_log);
+ brate = (b.bytes - est->last_bytes) << (10 - est->intvl_log);
+ brate = (brate >> est->ewma_log) - (est->avbps >> est->ewma_log);
- rate = (u64)(b.packets - est->last_packets) << (10 - est->ewma_log - est->intvl_log);
- rate -= (est->avpps >> est->ewma_log);
+ rate = (u64)(b.packets - est->last_packets) << (10 - est->intvl_log);
+ rate = (rate >> est->ewma_log) - (est->avpps >> est->ewma_log);
write_seqcount_begin(&est->seq);
est->avbps += brate;
@@ -143,6 +143,9 @@ int gen_new_estimator(struct gnet_stats_
if (parm->interval < -2 || parm->interval > 3)
return -EINVAL;
+ if (parm->ewma_log == 0 || parm->ewma_log >= 31)
+ return -EINVAL;
+
est = kzalloc(sizeof(*est), GFP_KERNEL);
if (!est)
return -ENOBUFS;
From: Rasmus Villemoes <[email protected]>
commit 20776b465c0c249f5e5b5b4fe077cd24ef1cda86 upstream.
It's not true that switchdev_port_obj_notify() only inspects the
->handled field of "struct switchdev_notifier_port_obj_info" if
call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON()
triggering for a non-zero return combined with ->handled not being
true. But the real problem here is that -EOPNOTSUPP is not being
properly handled.
The wrapper functions switchdev_handle_port_obj_add() et al change a
return value of -EOPNOTSUPP to 0, and the treatment of ->handled in
switchdev_port_obj_notify() seems to be designed to change that back
to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e.,
everybody returned -EOPNOTSUPP).
Currently, as soon as some device down the stack passes the check_cb()
check, ->handled gets set to true, which means that
switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP.
This, for example, means that the detection of hardware offload
support in the MRP code is broken: switchdev_port_obj_add() used by
br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP
code thinks the generation of MRP test frames has been offloaded, no
such frames are actually put on the wire. Similarly,
br_mrp_switchdev_set_ring_role() also always returns 0, causing
mrp->ring_role_offloaded to be set to 1.
To fix this, continue to set ->handled true if any callback returns
success or any error distinct from -EOPNOTSUPP. But if all the
callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so
the logic in switchdev_port_obj_notify() can propagate that
information.
Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices")
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/switchdev/switchdev.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/net/switchdev/switchdev.c
+++ b/net/switchdev/switchdev.c
@@ -461,10 +461,11 @@ static int __switchdev_handle_port_obj_a
extack = switchdev_notifier_info_to_extack(&port_obj_info->info);
if (check_cb(dev)) {
- /* This flag is only checked if the return value is success. */
- port_obj_info->handled = true;
- return add_cb(dev, port_obj_info->obj, port_obj_info->trans,
- extack);
+ err = add_cb(dev, port_obj_info->obj, port_obj_info->trans,
+ extack);
+ if (err != -EOPNOTSUPP)
+ port_obj_info->handled = true;
+ return err;
}
/* Switch ports might be stacked under e.g. a LAG. Ignore the
@@ -513,9 +514,10 @@ static int __switchdev_handle_port_obj_d
int err = -EOPNOTSUPP;
if (check_cb(dev)) {
- /* This flag is only checked if the return value is success. */
- port_obj_info->handled = true;
- return del_cb(dev, port_obj_info->obj);
+ err = del_cb(dev, port_obj_info->obj);
+ if (err != -EOPNOTSUPP)
+ port_obj_info->handled = true;
+ return err;
}
/* Switch ports might be stacked under e.g. a LAG. Ignore the
@@ -563,9 +565,10 @@ static int __switchdev_handle_port_attr_
int err = -EOPNOTSUPP;
if (check_cb(dev)) {
- port_attr_info->handled = true;
- return set_cb(dev, port_attr_info->attr,
- port_attr_info->trans);
+ err = set_cb(dev, port_attr_info->attr, port_attr_info->trans);
+ if (err != -EOPNOTSUPP)
+ port_attr_info->handled = true;
+ return err;
}
/* Switch ports might be stacked under e.g. a LAG. Ignore the
From: lianzhi chang <[email protected]>
[ Upstream commit 5cdc4a6950a883594e9640b1decb3fcf6222a594 ]
When the capacity of the disc is too large (assuming the 4.7G
specification), the disc (UDF file system) will be burned
multiple times in the windows (Multisession Usage). When the
remaining capacity of the CD is less than 300M (estimated
value, for reference only), open the CD in the Linux system,
the content of the CD is displayed as blank (the kernel will
say "No VRS found"). Windows can display the contents of the
CD normally.
Through analysis, in the "fs/udf/super.c": udf_check_vsd
function, the actual value of VSD_MAX_SECTOR_OFFSET may
be much larger than 0x800000. According to the current code
logic, it is found that the type of sbi->s_session is "__s32",
when the remaining capacity of the disc is less than 300M
(take a set of test values: sector=3154903040,
sbi->s_session=1540464, sb->s_blocksize_bits=11 ), the
calculation result of "sbi->s_session << sb->s_blocksize_bits"
will overflow. Therefore, it is necessary to convert the
type of s_session to "loff_t" (when udf_check_vsd starts,
assign a value to _sector, which is also converted in this
way), so that the result will not overflow, and then the
content of the disc can be displayed normally.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: lianzhi chang <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/super.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 4aba4878ed967..8bb001c7927f0 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -705,6 +705,7 @@ static int udf_check_vsd(struct super_block *sb)
struct buffer_head *bh = NULL;
int nsr = 0;
struct udf_sb_info *sbi;
+ loff_t session_offset;
sbi = UDF_SB(sb);
if (sb->s_blocksize < sizeof(struct volStructDesc))
@@ -712,7 +713,8 @@ static int udf_check_vsd(struct super_block *sb)
else
sectorsize = sb->s_blocksize;
- sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits);
+ session_offset = (loff_t)sbi->s_session << sb->s_blocksize_bits;
+ sector += session_offset;
udf_debug("Starting at sector %u (%lu byte sectors)\n",
(unsigned int)(sector >> sb->s_blocksize_bits),
@@ -757,8 +759,7 @@ static int udf_check_vsd(struct super_block *sb)
if (nsr > 0)
return 1;
- else if (!bh && sector - (sbi->s_session << sb->s_blocksize_bits) ==
- VSD_FIRST_SECTOR_OFFSET)
+ else if (!bh && sector - session_offset == VSD_FIRST_SECTOR_OFFSET)
return -1;
else
return 0;
--
2.27.0
From: Kai-Chuan Hsieh <[email protected]>
[ Upstream commit f84d3a1ec375e46a55cc3ba85c04272b24bd3921 ]
Add HD Audio Device PCI ID for the Intel Cometlake-R platform
Reviewed-by: Kai Vehmanen <[email protected]>
Signed-off-by: Kai-Chuan Hsieh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 5f515a29668c8..b3667a5efdc1f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2450,6 +2450,9 @@ static const struct pci_device_id azx_ids[] = {
/* CometLake-S */
{ PCI_DEVICE(0x8086, 0xa3f0),
.driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
+ /* CometLake-R */
+ { PCI_DEVICE(0x8086, 0xf0c8),
+ .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
/* Icelake */
{ PCI_DEVICE(0x8086, 0x34c8),
.driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
--
2.27.0
From: Revanth Rajashekar <[email protected]>
[ Upstream commit 4d6b1c95b974761c01cbad92321b82232b66d2a2 ]
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and
the metadata size play a vital role in deteriming the host buffer size.
If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer,
instead the controller adds it.
Signed-off-by: Revanth Rajashekar <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 7a964271959d8..c2cabd77884bf 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1295,8 +1295,21 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
}
length = (io.nblocks + 1) << ns->lba_shift;
- meta_len = (io.nblocks + 1) * ns->ms;
- metadata = nvme_to_user_ptr(io.metadata);
+
+ if ((io.control & NVME_RW_PRINFO_PRACT) &&
+ ns->ms == sizeof(struct t10_pi_tuple)) {
+ /*
+ * Protection information is stripped/inserted by the
+ * controller.
+ */
+ if (nvme_to_user_ptr(io.metadata))
+ return -EINVAL;
+ meta_len = 0;
+ metadata = NULL;
+ } else {
+ meta_len = (io.nblocks + 1) * ns->ms;
+ metadata = nvme_to_user_ptr(io.metadata);
+ }
if (ns->ext) {
length += meta_len;
--
2.27.0
From: Tony Lindgren <[email protected]>
[ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ]
On deferred probe, we will get the following splat:
cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517
WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78
...
(regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc)
(release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0)
(really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4)
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/motorola/phy-cpcap-usb.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 5baf64dfb24de..1bebad36bf2e5 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -625,35 +625,42 @@ static int cpcap_usb_phy_probe(struct platform_device *pdev)
generic_phy = devm_phy_create(ddata->dev, NULL, &ops);
if (IS_ERR(generic_phy)) {
error = PTR_ERR(generic_phy);
- return PTR_ERR(generic_phy);
+ goto out_reg_disable;
}
phy_set_drvdata(generic_phy, ddata);
phy_provider = devm_of_phy_provider_register(ddata->dev,
of_phy_simple_xlate);
- if (IS_ERR(phy_provider))
- return PTR_ERR(phy_provider);
+ if (IS_ERR(phy_provider)) {
+ error = PTR_ERR(phy_provider);
+ goto out_reg_disable;
+ }
error = cpcap_usb_init_optional_pins(ddata);
if (error)
- return error;
+ goto out_reg_disable;
cpcap_usb_init_optional_gpios(ddata);
error = cpcap_usb_init_iio(ddata);
if (error)
- return error;
+ goto out_reg_disable;
error = cpcap_usb_init_interrupts(pdev, ddata);
if (error)
- return error;
+ goto out_reg_disable;
usb_add_phy_dev(&ddata->phy);
atomic_set(&ddata->active, 1);
schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
return 0;
+
+out_reg_disable:
+ regulator_disable(ddata->vusb);
+
+ return error;
}
static int cpcap_usb_phy_remove(struct platform_device *pdev)
--
2.27.0
From: Greg Kroah-Hartman <[email protected]>
This reverts commit bba91cdba612fbce4f8575c5d94d2b146fb83ea3 which is
commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e upstream.
It breaks things in 5.4.y, so let's drop it.
Reported-by: Andres Freund <[email protected]>
Cc: Bijan Mottahedeh <[email protected]>
CC: Jens Axboe <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -886,11 +886,14 @@ generic_make_request_checks(struct bio *
}
/*
- * For a REQ_NOWAIT based request, return -EOPNOTSUPP
- * if queue is not a request based queue.
+ * Non-mq queues do not honor REQ_NOWAIT, so complete a bio
+ * with BLK_STS_AGAIN status in order to catch -EAGAIN and
+ * to give a chance to the caller to repeat request gracefully.
*/
- if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q))
- goto not_supported;
+ if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q)) {
+ status = BLK_STS_AGAIN;
+ goto end_io;
+ }
if (should_fail_bio(bio))
goto end_io;
From: Catalin Marinas <[email protected]>
commit 91cb2c8b072e00632adf463b78b44f123d46a0fa upstream.
Commit 519ea6f1c82f ("arm64: Fix kernel address detection of
__is_lm_address()") fixed the incorrect validation of addresses below
PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed
to virt_addr_valid().
Fix this by explicitly resetting the pointer tag prior to invoking
__is_lm_address(). This is consistent with the __lm_to_phys() macro.
Fixes: 519ea6f1c82f ("arm64: Fix kernel address detection of __is_lm_address()")
Signed-off-by: Catalin Marinas <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Cc: <[email protected]> # 5.4.x
Cc: Will Deacon <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/memory.h | 2 +-
arch/arm64/mm/physaddr.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -332,7 +332,7 @@ static inline void *phys_to_virt(phys_ad
#endif /* !CONFIG_SPARSEMEM_VMEMMAP || CONFIG_DEBUG_VIRTUAL */
#define virt_addr_valid(addr) ({ \
- __typeof__(addr) __addr = addr; \
+ __typeof__(addr) __addr = __tag_reset(addr); \
__is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr)); \
})
--- a/arch/arm64/mm/physaddr.c
+++ b/arch/arm64/mm/physaddr.c
@@ -9,7 +9,7 @@
phys_addr_t __virt_to_phys(unsigned long x)
{
- WARN(!__is_lm_address(x),
+ WARN(!__is_lm_address(__tag_reset(x)),
"virt_to_phys used for non-linear address: %pK (%pS)\n",
(void *)x,
(void *)x);
From: Pan Bian <[email protected]>
commit cf3c46631e1637582f517a574c77cd6c05793817 upstream.
Put the device node dn before return error code on failure path.
Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Pan Bian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/dsa/bcm_sf2.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -421,15 +421,19 @@ static int bcm_sf2_mdio_register(struct
/* Find our integrated MDIO bus node */
dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio");
priv->master_mii_bus = of_mdio_find_bus(dn);
- if (!priv->master_mii_bus)
+ if (!priv->master_mii_bus) {
+ of_node_put(dn);
return -EPROBE_DEFER;
+ }
get_device(&priv->master_mii_bus->dev);
priv->master_mii_dn = dn;
priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
- if (!priv->slave_mii_bus)
+ if (!priv->slave_mii_bus) {
+ of_node_put(dn);
return -ENOMEM;
+ }
priv->slave_mii_bus->priv = priv;
priv->slave_mii_bus->name = "sf2 slave mii";
From: Josh Poimboeuf <[email protected]>
[ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ]
Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.
We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.
Just ignore it and move on.
Reported-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/elf.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index edba4745f25a9..693d740107a8b 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -214,8 +214,11 @@ static int read_symbols(struct elf *elf)
symtab = find_section_by_name(elf, ".symtab");
if (!symtab) {
- WARN("missing symbol table");
- return -1;
+ /*
+ * A missing symbol table is actually possible if it's an empty
+ * .o file. This can happen for thunk_64.o.
+ */
+ return 0;
}
symbols_nr = symtab->sh.sh_size / symtab->sh.sh_entsize;
--
2.27.0
From: Vincenzo Frascino <[email protected]>
commit 519ea6f1c82fcdc9842908155ae379de47818778 upstream.
Currently, the __is_lm_address() check just masks out the top 12 bits
of the address, but if they are 0, it still yields a true result.
This has as a side effect that virt_addr_valid() returns true even for
invalid virtual addresses (e.g. 0x0).
Fix the detection checking that it's actually a kernel address starting
at PAGE_OFFSET.
Fixes: 68dd8ef32162 ("arm64: memory: Fix virt_addr_valid() using __is_lm_address()")
Cc: <[email protected]> # 5.4.x
Cc: Will Deacon <[email protected]>
Suggested-by: Catalin Marinas <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Vincenzo Frascino <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/memory.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -247,11 +247,11 @@ static inline const void *__tag_set(cons
/*
- * The linear kernel range starts at the bottom of the virtual address
- * space. Testing the top bit for the start of the region is a
- * sufficient check and avoids having to worry about the tag.
+ * Check whether an arbitrary address is within the linear map, which
+ * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
+ * kernel's TTBR1 address range.
*/
-#define __is_lm_address(addr) (!(((u64)addr) & BIT(vabits_actual - 1)))
+#define __is_lm_address(addr) (((u64)(addr) ^ PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
#define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
#define __kimg_to_phys(addr) ((addr) - kimage_voffset)
From: Brian King <[email protected]>
[ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ]
While testing live partition mobility, we have observed occasional crashes
of the Linux partition. What we've seen is that during the live migration,
for specific configurations with large amounts of memory, slow network
links, and workloads that are changing memory a lot, the partition can end
up being suspended for 30 seconds or longer. This resulted in the following
scenario:
CPU 0 CPU 1
------------------------------- ----------------------------------
scsi_queue_rq migration_store
-> blk_mq_start_request -> rtas_ibm_suspend_me
-> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me
_______________________________________V
|
V
-> IPI from CPU 1
-> rtas_percpu_suspend_me
-> __rtas_suspend_last_cpu
-- Linux partition suspended for > 30 seconds --
-> for_each_online_cpu(cpu)
plpar_hcall_norets(H_PROD
-> scsi_dispatch_cmd
-> scsi_times_out
-> scsi_abort_command
-> queue_delayed_work
-> ibmvfc_queuecommand_lck
-> ibmvfc_send_event
-> ibmvfc_send_crq
- returns H_CLOSED
<- returns SCSI_MLQUEUE_HOST_BUSY
-> __blk_mq_requeue_request
-> scmd_eh_abort_handler
-> scsi_try_to_abort_cmd
- returns SUCCESS
-> scsi_queue_insert
Normally, the SCMD_STATE_COMPLETE bit would protect against the command
completion and the timeout, but that doesn't work here, since we don't
check that at all in the SCSI_MLQUEUE_HOST_BUSY path.
In this case we end up calling scsi_queue_insert on a request that has
already been queued, or possibly even freed, and we crash.
The patch below simply increases the default I/O timeout to avoid this race
condition. This is also the timeout value that nearly all IBM SAN storage
recommends setting as the default value.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Brian King <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 8a76284b59b08..523809a8a2323 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2881,8 +2881,10 @@ static int ibmvfc_slave_configure(struct scsi_device *sdev)
unsigned long flags = 0;
spin_lock_irqsave(shost->host_lock, flags);
- if (sdev->type == TYPE_DISK)
+ if (sdev->type == TYPE_DISK) {
sdev->allow_restart = 1;
+ blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
+ }
spin_unlock_irqrestore(shost->host_lock, flags);
return 0;
}
--
2.27.0
From: ethanwu <[email protected]>
commit cfc0eed0ec89db7c4a8d461174cabfaa4a0912c7 upstream.
We could have some nodes/leaves in subvolume whose owner are not the
that subvolume. In this way, when we resolve normal backrefs of that
subvolume, we should avoid collecting those references from these blocks.
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: ethanwu <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/backref.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -443,11 +443,14 @@ static int add_all_parents(struct btrfs_
* slot == nritems.
* 2. We are searching for normal backref but bytenr of this leaf
* matches shared data backref
+ * 3. The leaf owner is not equal to the root we are searching
+ *
* For these cases, go to the next leaf before we continue.
*/
eb = path->nodes[0];
if (path->slots[0] >= btrfs_header_nritems(eb) ||
- is_shared_data_backref(preftrees, eb->start)) {
+ is_shared_data_backref(preftrees, eb->start) ||
+ ref->root_id != btrfs_header_owner(eb)) {
if (time_seq == SEQ_LAST)
ret = btrfs_next_leaf(root, path);
else
@@ -466,9 +469,12 @@ static int add_all_parents(struct btrfs_
/*
* We are searching for normal backref but bytenr of this leaf
- * matches shared data backref.
+ * matches shared data backref, OR
+ * the leaf owner is not equal to the root we are searching for
*/
- if (slot == 0 && is_shared_data_backref(preftrees, eb->start)) {
+ if (slot == 0 &&
+ (is_shared_data_backref(preftrees, eb->start) ||
+ ref->root_id != btrfs_header_owner(eb))) {
if (time_seq == SEQ_LAST)
ret = btrfs_next_leaf(root, path);
else
From: Dinghao Liu <[email protected]>
[ Upstream commit d6e3ae76728ccde49271d9f5acfebbea0c5625a3 ]
When ioread32() returns 0xFFFFFFFF, we should execute cleanup functions
like other error handling paths before returning.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Karan Tilak Kumar <[email protected]>
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/fnic/vnic_dev.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
index 522636e946282..c8bf8c7ada6a7 100644
--- a/drivers/scsi/fnic/vnic_dev.c
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -444,7 +444,8 @@ int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
fetch_index = ioread32(&vdev->devcmd2->wq.ctrl->fetch_index);
if (fetch_index == 0xFFFFFFFF) { /* check for hardware gone */
pr_err("error in devcmd2 init");
- return -ENODEV;
+ err = -ENODEV;
+ goto err_free_wq;
}
/*
@@ -460,7 +461,7 @@ int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
err = vnic_dev_alloc_desc_ring(vdev, &vdev->devcmd2->results_ring,
DEVCMD2_RING_SIZE, DEVCMD2_DESC_SIZE);
if (err)
- goto err_free_wq;
+ goto err_disable_wq;
vdev->devcmd2->result =
(struct devcmd2_result *) vdev->devcmd2->results_ring.descs;
@@ -481,8 +482,9 @@ int vnic_dev_init_devcmd2(struct vnic_dev *vdev)
err_free_desc_ring:
vnic_dev_free_desc_ring(vdev, &vdev->devcmd2->results_ring);
-err_free_wq:
+err_disable_wq:
vnic_wq_disable(&vdev->devcmd2->wq);
+err_free_wq:
vnic_wq_free(&vdev->devcmd2->wq);
err_free_devcmd2:
kfree(vdev->devcmd2);
--
2.27.0
On Fri, 5 Feb 2021 at 19:43, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.96 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.96-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 5.4.96-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: da7c9d56bab5c4eb00d9d1545fcdc390ce75e001
git describe: v5.4.95-33-gda7c9d56bab5
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.95-33-gda7c9d56bab5
No regressions (compared to build v5.4.95)
No fixes (compared to build v5.4.95)
Ran 45285 total tests in the following environments and test suites.
Environments
--------------
- arc
- arm
- arm64
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- mips
- parisc
- powerpc
- qemu-arm-clang
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu-x86_64-kcsan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- riscv
- s390
- sh
- sparc
- x15
- x86
- x86-kasan
- x86_64
Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* perf
* fwts
* ltp-sched-tests
* network-basic-tests
* v4l2-compliance
* kselftest-kexec
* kselftest-x86
* kvm-unit-tests
* ltp-open-posix-tests
* rcutorture
* kselftest-
* kselftest-vm
* ssuite
--
Linaro LKFT
https://lkft.linaro.org
On Fri, Feb 05, 2021 at 03:07:15PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.96 release.
> There are 32 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 428 pass: 428 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hi!
> From: Pan Bian <[email protected]>
>
> commit cf3c46631e1637582f517a574c77cd6c05793817 upstream.
>
> Put the device node dn before return error code on failure path.
This fixes one resource leak, but exposes next one: get_device() is
not undone in the second error path and in the end of function.
Best regards,
Pavel
> +++ b/drivers/net/dsa/bcm_sf2.c
> @@ -421,15 +421,19 @@ static int bcm_sf2_mdio_register(struct
> /* Find our integrated MDIO bus node */
> dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio");
> priv->master_mii_bus = of_mdio_find_bus(dn);
> - if (!priv->master_mii_bus)
> + if (!priv->master_mii_bus) {
> + of_node_put(dn);
> return -EPROBE_DEFER;
> + }
>
> get_device(&priv->master_mii_bus->dev);
> priv->master_mii_dn = dn;
>
> priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
> - if (!priv->slave_mii_bus)
> + if (!priv->slave_mii_bus) {
> + of_node_put(dn);
> return -ENOMEM;
> + }
>
> priv->slave_mii_bus->priv = priv;
> priv->slave_mii_bus->name = "sf2 slave mii";
>
--
http://www.livejournal.com/~pavelmachek
On Fri, Feb 05, 2021 at 01:16:29PM -0800, Florian Fainelli wrote:
> On 2/5/21 6:07 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.96 release.
> > There are 32 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun, 07 Feb 2021 14:06:42 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.96-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Tested-by: Florian Fainelli <[email protected]>
>
> On ARCH_BRCMSTB with both ARM 32-bit and ARM 64-bit configurations, no
> regressions observed.
Thanks for testing this kernel and letting me know.
greg k-h