Before SF support was introduced, the DMA device was equal to
mdev->device which was in essence equal to pdev->dev;
With SF introduction this is no longer true. It has already been
handled for vhost_vdpa since the reference to the dma device can from
within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
real dma device when initializing the device.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index bc33f2c523d3..a4ff158181e0 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -2046,7 +2046,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
if (err)
goto err_mtu;
- mvdev->vdev.dma_dev = mdev->device;
+ mvdev->vdev.dma_dev = &mdev->pdev->dev;
err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
if (err)
goto err_mtu;
--
2.31.1
?? 2021/6/3 ????7:22, Eli Cohen д??:
> Before SF support was introduced, the DMA device was equal to
> mdev->device which was in essence equal to pdev->dev;
> With SF introduction this is no longer true. It has already been
> handled for vhost_vdpa since the reference to the dma device can from
> within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
> real dma device when initializing the device.
>
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Note sure this is correct, according to the commit log it should be the
patch that introduces the SF or aux bus support for vDPA.
> Signed-off-by: Eli Cohen <[email protected]>
Patch looks correct.
Thanks
> ---
> drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index bc33f2c523d3..a4ff158181e0 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -2046,7 +2046,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
> if (err)
> goto err_mtu;
>
> - mvdev->vdev.dma_dev = mdev->device;
> + mvdev->vdev.dma_dev = &mdev->pdev->dev;
> err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> if (err)
> goto err_mtu;
On Fri, Jun 04, 2021 at 10:35:59AM +0800, Jason Wang wrote:
>
> 在 2021/6/3 下午7:22, Eli Cohen 写道:
> > Before SF support was introduced, the DMA device was equal to
> > mdev->device which was in essence equal to pdev->dev;
> > With SF introduction this is no longer true. It has already been
> > handled for vhost_vdpa since the reference to the dma device can from
> > within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
> > real dma device when initializing the device.
> >
> > Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
>
>
> Note sure this is correct, according to the commit log it should be the
> patch that introduces the SF or aux bus support for vDPA.
Where did you see that?
git log -p drivers/vdpa/mlx5/net/mlx5_vnet.c
...
+ mvdev->vdev.dma_dev = mdev->device;
+ err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
...
comes from commit 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Thanks
>
>
> > Signed-off-by: Eli Cohen <[email protected]>
>
>
> Patch looks correct.
>
> Thanks
>
>
> > ---
> > drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > index bc33f2c523d3..a4ff158181e0 100644
> > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > @@ -2046,7 +2046,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
> > if (err)
> > goto err_mtu;
> > - mvdev->vdev.dma_dev = mdev->device;
> > + mvdev->vdev.dma_dev = &mdev->pdev->dev;
> > err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> > if (err)
> > goto err_mtu;
>
> _______________________________________________
> Virtualization mailing list
> [email protected]
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization
在 2021/6/4 下午11:57, Leon Romanovsky 写道:
> On Fri, Jun 04, 2021 at 10:35:59AM +0800, Jason Wang wrote:
>> 在 2021/6/3 下午7:22, Eli Cohen 写道:
>>> Before SF support was introduced, the DMA device was equal to
>>> mdev->device which was in essence equal to pdev->dev;
>>> With SF introduction this is no longer true. It has already been
>>> handled for vhost_vdpa since the reference to the dma device can from
>>> within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
>>> real dma device when initializing the device.
>>>
>>> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
>>
>> Note sure this is correct, according to the commit log it should be the
>> patch that introduces the SF or aux bus support for vDPA.
> Where did you see that?
>
> git log -p drivers/vdpa/mlx5/net/mlx5_vnet.c
>
> ...
> + mvdev->vdev.dma_dev = mdev->device;
> + err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> ...
> comes from commit 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
If I read the commit log and code correctly:
"
With SF introduction this is no longer true.
"
It works before SF is introduced.
Thanks
>
> Thanks
>
>>
>>> Signed-off-by: Eli Cohen <[email protected]>
>>
>> Patch looks correct.
>>
>> Thanks
>>
>>
>>> ---
>>> drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
>>> index bc33f2c523d3..a4ff158181e0 100644
>>> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
>>> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
>>> @@ -2046,7 +2046,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
>>> if (err)
>>> goto err_mtu;
>>> - mvdev->vdev.dma_dev = mdev->device;
>>> + mvdev->vdev.dma_dev = &mdev->pdev->dev;
>>> err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
>>> if (err)
>>> goto err_mtu;
>> _______________________________________________
>> Virtualization mailing list
>> [email protected]
>> https://lists.linuxfoundation.org/mailman/listinfo/virtualization
On Mon, Jun 07, 2021 at 10:30:42AM +0800, Jason Wang wrote:
>
> 在 2021/6/4 下午11:57, Leon Romanovsky 写道:
> > On Fri, Jun 04, 2021 at 10:35:59AM +0800, Jason Wang wrote:
> > > 在 2021/6/3 下午7:22, Eli Cohen 写道:
> > > > Before SF support was introduced, the DMA device was equal to
> > > > mdev->device which was in essence equal to pdev->dev;
> > > > With SF introduction this is no longer true. It has already been
> > > > handled for vhost_vdpa since the reference to the dma device can from
> > > > within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
> > > > real dma device when initializing the device.
> > > >
> > > > Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> > >
> > > Note sure this is correct, according to the commit log it should be the
> > > patch that introduces the SF or aux bus support for vDPA.
> > Where did you see that?
> >
> > git log -p drivers/vdpa/mlx5/net/mlx5_vnet.c
> >
> > ...
> > + mvdev->vdev.dma_dev = mdev->device;
> > + err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> > ...
> > comes from commit 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
>
>
> If I read the commit log and code correctly:
>
> "
>
> With SF introduction this is no longer true.
>
> "
>
> It works before SF is introduced.
Yes, you are right, sorry for the noise.
>
> Thanks
>
>
> >
> > Thanks
> >
> > >
> > > > Signed-off-by: Eli Cohen <[email protected]>
> > >
> > > Patch looks correct.
> > >
> > > Thanks
> > >
> > >
> > > > ---
> > > > drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > index bc33f2c523d3..a4ff158181e0 100644
> > > > --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> > > > @@ -2046,7 +2046,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
> > > > if (err)
> > > > goto err_mtu;
> > > > - mvdev->vdev.dma_dev = mdev->device;
> > > > + mvdev->vdev.dma_dev = &mdev->pdev->dev;
> > > > err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> > > > if (err)
> > > > goto err_mtu;
> > > _______________________________________________
> > > Virtualization mailing list
> > > [email protected]
> > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
>