This is the start of the stable review cycle for the 5.12.11 release.
There are 173 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.12.11-rc1
Ming Lei <[email protected]>
scsi: core: Only put parent device if host state differs from SHOST_CREATED
Ming Lei <[email protected]>
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
Ming Lei <[email protected]>
scsi: core: Fix failure handling of scsi_add_host_with_dma()
Ming Lei <[email protected]>
scsi: core: Fix error handling of scsi_host_alloc()
Dai Ngo <[email protected]>
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
Trond Myklebust <[email protected]>
NFSv4: Fix second deadlock in nfs4_evict_inode()
Anna Schumaker <[email protected]>
NFS: Fix use-after-free in nfs4_init_client()
Paolo Bonzini <[email protected]>
kvm: fix previous commit for 32-bit builds
Leo Yan <[email protected]>
perf session: Correct buffer copying when peeking events
Bjorn Andersson <[email protected]>
pinctrl: qcom: Make it possible to select SC8180x TLMM
Trond Myklebust <[email protected]>
NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
Dan Carpenter <[email protected]>
NFS: Fix a potential NULL dereference in nfs_get_client()
Alaa Hleihel <[email protected]>
IB/mlx5: Fix initializing CQ fragments buffer
Sean Christopherson <[email protected]>
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
CodyYao-oc <[email protected]>
x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
Maximilian Luz <[email protected]>
platform/surface: aggregator: Fix event disable function
Dietmar Eggemann <[email protected]>
sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
Kai Vehmanen <[email protected]>
ASoC: SOF: reset enabled_cores state at suspend
Vincent Guittot <[email protected]>
sched/fair: Make sure to update tg contrib for blocked load
Vincent Guittot <[email protected]>
sched/fair: Keep load_avg and load_sum synced
Kyle Tso <[email protected]>
dt-bindings: connector: Replace BIT macro with generic bit ops
Marco Elver <[email protected]>
perf: Fix data race between pin_count increment/decrement
Kan Liang <[email protected]>
perf/x86/intel/uncore: Fix a kernel WARNING triggered by maxcpus=1
Manivannan Sadhasivam <[email protected]>
pinctrl: qcom: Fix duplication in gpio_groups
Srinivas Kandagatla <[email protected]>
gpio: wcd934x: Fix shift-out-of-bounds error
Yang Li <[email protected]>
phy: ti: Fix an error code in wiz_probe()
Jerome Brunet <[email protected]>
ASoC: meson: gx-card: fix sound-dai dt schema
Kefeng Wang <[email protected]>
ASoC: core: Fix Null-point-dereference in fmt_single_name()
Wang Wensheng <[email protected]>
phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
Zhen Lei <[email protected]>
tools/bootconfig: Fix error return code in apply_xbc()
Nathan Chancellor <[email protected]>
vmlinux.lds.h: Avoid orphan section with !SMP
Arnd Bergmann <[email protected]>
ARM: cpuidle: Avoid orphan section warning
Maor Gottlieb <[email protected]>
RDMA: Verify port when creating flow rule
Mark Bloch <[email protected]>
RDMA/mlx5: Block FDB rules when not in switchdev mode
Shay Drory <[email protected]>
RDMA/mlx4: Do not map the core_clock page to user space unless enabled
Mark Zhang <[email protected]>
RDMA/mlx5: Use different doorbell memory for different processes
Kamal Heib <[email protected]>
RDMA/ipoib: Fix warning caused by destroying non-initial netns
Robert Marko <[email protected]>
hwmon: (tps23861) correct shunt LSB values
Robert Marko <[email protected]>
hwmon: (tps23861) set current shunt value
Robert Marko <[email protected]>
hwmon: (tps23861) define regmap max register
Wilken Gottwalt <[email protected]>
hwmon: (corsair-psu) fix suspend behavior
Jonathan Marek <[email protected]>
drm/msm/a6xx: avoid shadow NULL reference in failure path
Jonathan Marek <[email protected]>
drm/msm/a6xx: update/fix CP_PROTECT initialization
Jonathan Marek <[email protected]>
drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
Linus Walleij <[email protected]>
drm/mcde: Fix off by 10^3 in calculation
Bjorn Andersson <[email protected]>
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
Kyle Tso <[email protected]>
usb: typec: tcpm: Fix misuses of AMS invocation
Kyle Tso <[email protected]>
usb: typec: tcpm: Correct the responses in SVDM Version 2.0 DFP
Wesley Cheng <[email protected]>
usb: dwc3: gadget: Disable gadget IRQ during pullup disable
Sanket Parmar <[email protected]>
usb: cdns3: Enable TDL_CHK only for OUT ep
Chen Li <[email protected]>
phy: usb: Fix misuse of IS_ENABLED
Axel Lin <[email protected]>
regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks
Axel Lin <[email protected]>
regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges
Axel Lin <[email protected]>
regulator: bd71828: Fix .n_voltages settings
Axel Lin <[email protected]>
regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting
Axel Lin <[email protected]>
regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails
Axel Lin <[email protected]>
regulator: fan53880: Fix missing n_voltages setting
Axel Lin <[email protected]>
regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode
Matti Vaittinen <[email protected]>
regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837
Dmitry Osipenko <[email protected]>
regulator: max77620: Use device_set_of_node_from_dev()
Dmitry Baryshkov <[email protected]>
regulator: core: resolve supply for boot-on/always-on regulators
Kyle Tso <[email protected]>
usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
Li Jun <[email protected]>
usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port
Li Jun <[email protected]>
usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port
Kyle Tso <[email protected]>
usb: typec: tcpm: Properly handle Alert and Status Messages
Maciej Żenczykowski <[email protected]>
usb: fix various gadget panics on 10gbps cabling
Maciej Żenczykowski <[email protected]>
usb: fix various gadgets null ptr deref on 10gbps cabling.
Linyu Yuan <[email protected]>
usb: gadget: eem: fix wrong eem header operation
Pawel Laszczak <[email protected]>
usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
Johan Hovold <[email protected]>
USB: serial: cp210x: fix CP2102N-A01 modem control
Stefan Agner <[email protected]>
USB: serial: cp210x: fix alternate function for CP2102N QFN20
Johan Hovold <[email protected]>
USB: serial: quatech2: fix control-request directions
Alexandre GRIVEAUX <[email protected]>
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
George McCollister <[email protected]>
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
Wesley Cheng <[email protected]>
usb: gadget: f_fs: Ensure io_completion_wq is idle during unbind
Andy Shevchenko <[email protected]>
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
Andy Shevchenko <[email protected]>
usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
Mayank Rana <[email protected]>
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
Andy Shevchenko <[email protected]>
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
Thomas Petazzoni <[email protected]>
usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handling
Mario Limonciello <[email protected]>
usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
Marian-Cristian Rotariu <[email protected]>
usb: dwc3: ep0: fix NULL pointer exception
Jack Pham <[email protected]>
usb: dwc3: debugfs: Add and remove endpoint dirs dynamically
Jack Pham <[email protected]>
usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL
Christophe JAILLET <[email protected]>
usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe
Neil Armstrong <[email protected]>
usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled
Kyle Tso <[email protected]>
usb: pd: Set PD_T_SINK_WAIT_CAP to 310ms
Maciej Żenczykowski <[email protected]>
usb: f_ncm: only first packet of aggregate needs to start timer
Maciej Żenczykowski <[email protected]>
USB: f_ncm: ncm_bitrate (speed) is unsigned
Geert Uytterhoeven <[email protected]>
mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+
Wolfram Sang <[email protected]>
mmc: renesas_sdhi: abort tuning when timeout detected
Masami Hiramatsu <[email protected]>
tools/bootconfig: Fix a build error accroding to undefined fallthrough
Liangyan <[email protected]>
tracing: Correct the length check which causes memory corruption
Steven Rostedt (VMware) <[email protected]>
ftrace: Do not blindly read the ip address in ftrace_bug()
Alexander Kuznetsov <[email protected]>
cgroup1: don't allow '\n' in renaming
Eric W. Biederman <[email protected]>
coredump: Limit what can interrupt coredumps
Nikolay Borisov <[email protected]>
btrfs: promote debugging asserts to full-fledged checks in validate_super
Ritesh Harjani <[email protected]>
btrfs: return value from btrfs_mark_extent_written() in case of error
Naohiro Aota <[email protected]>
btrfs: zoned: fix zone number to sector/physical calculation
Josef Bacik <[email protected]>
btrfs: do not write supers if we have an fs error
Xiao Ni <[email protected]>
async_xor: check src_offs is not NULL before updating it
Coly Li <[email protected]>
bcache: avoid oversized read request in cache missing code path
Coly Li <[email protected]>
bcache: remove bcache device self-defined readahead
Frederic Weisbecker <[email protected]>
tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
Wei Yongjun <[email protected]>
bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
Ricky Wu <[email protected]>
misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
Yang Yingliang <[email protected]>
usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
Wenli Looi <[email protected]>
staging: rtl8723bs: Fix uninitialized variables
Paolo Bonzini <[email protected]>
kvm: avoid speculation-based attacks from out-of-range memslot accesses
Lai Jiangshan <[email protected]>
KVM: X86: MMU: Use the correct inherited permissions to get shadow page
Lai Jiangshan <[email protected]>
KVM: x86: Unload MMU on guest TLB flush if TDP disabled to force MMU sync
Kan Liang <[email protected]>
perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
Tor Vic <[email protected]>
x86, lto: Pass -stack-alignment only on LLD < 13.0.0
Desmond Cheong Zhi Xi <[email protected]>
drm: Lock pointer access in drm_master_release()
Desmond Cheong Zhi Xi <[email protected]>
drm: Fix use-after-free read in drm_getunique()
Mika Westerberg <[email protected]>
ACPI: Pass the same capabilities to the _OSC regardless of the query flag
Zhang Rui <[email protected]>
Revert "ACPI: sleep: Put the FACS table after using it"
Lukas Wunner <[email protected]>
spi: bcm2835: Fix out-of-bounds access with more than 4 slaves
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8
Jeremy Szu <[email protected]>
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2
Hui Wang <[email protected]>
ALSA: hda/realtek: headphone and mic don't work on an Acer laptop
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()
Takashi Iwai <[email protected]>
ALSA: seq: Fix race of snd_seq_timer_open()
Chris Packham <[email protected]>
i2c: mpc: implement erratum A-004447 workaround
Chris Packham <[email protected]>
i2c: mpc: Make use of i2c_recover_bus()
Lukas Wunner <[email protected]>
spi: Cleanup on failure of initial setup
Saravana Kannan <[email protected]>
spi: Don't have controller clean up spi device before driver unbind
Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
Chris Packham <[email protected]>
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
Sagi Grimberg <[email protected]>
nvmet: fix false keep-alive timeout when a controller is torn down
Sagi Grimberg <[email protected]>
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
Jiapeng Chong <[email protected]>
bnx2x: Fix missing error code in bnx2x_iov_init_one()
John Keeping <[email protected]>
dm verity: fix require_signatures module_param permissions
Daniel Borkmann <[email protected]>
bpf, selftests: Adjust few selftest result_unpriv outcomes
Tiezhu Yang <[email protected]>
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
Hannes Reinecke <[email protected]>
nvme-fabrics: decode host pathing error for connect
Nick Desaulniers <[email protected]>
Makefile: LTO: have linker check -Wframe-larger-than
George McCollister <[email protected]>
net: dsa: microchip: enable phy errata workaround on 9567
Saubhik Mukherjee <[email protected]>
net: appletalk: cops: Fix data race in cops_probe1
Zong Li <[email protected]>
net: macb: ensure the device is available before accessing GEMGXL control registers
Dmitry Bogdanov <[email protected]>
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
Yang Yingliang <[email protected]>
scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
Matt Wang <[email protected]>
scsi: vmw_pvscsi: Set correct residual data length
Javed Hasan <[email protected]>
scsi: bnx2fc: Return failure if io_req is already in ABTS processing
Íñigo Huguet <[email protected]>
net:sfc: fix non-freed irq in legacy irq mode
Rao Shoaib <[email protected]>
RDS tcp loopback connection can hang
Zheyu Ma <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock
Sergey Senozhatsky <[email protected]>
wq: handle VM suspension in stall detection
Shakeel Butt <[email protected]>
cgroup: disable controllers at parse time
Dan Carpenter <[email protected]>
net: mdiobus: get rid of a BUG_ON()
Johannes Berg <[email protected]>
netlink: disable IRQs for netlink_lock_table()
Johannes Berg <[email protected]>
bonding: init notify_work earlier to avoid uninitialized use
Zheyu Ma <[email protected]>
isdn: mISDN: netjet: Fix crash in nj_probe:
Li Jun <[email protected]>
usb: chipidea: udc: assign interrupt number to USB gadget structure
Chunyan Zhang <[email protected]>
spi: sprd: Add missing MODULE_DEVICE_TABLE
Zou Wei <[email protected]>
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE
Eric Farman <[email protected]>
vfio-ccw: Serialize FSM IDLE state with I/O completion
Eric Farman <[email protected]>
vfio-ccw: Reset FSM state to IDLE inside FSM
Jiri Olsa <[email protected]>
bpf: Add deny list of btf ids check for tracing programs
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix 3-830 tablet
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Glavey TM800A550L tablet
Dinghao Liu <[email protected]>
usb: cdns3: Fix runtime PM imbalance on error
Jeimon <[email protected]>
net/nfc/rawsock.c: fix a permission check bug
Bixuan Cui <[email protected]>
ASoC: codecs: lpass-tx-macro: add missing MODULE_DEVICE_TABLE
Srinivas Kandagatla <[email protected]>
ASoC: codecs: lpass-rx-macro: add missing MODULE_DEVICE_TABLE
Jiri Olsa <[email protected]>
bpf: Forbid trampoline attach for functions with variable arguments
Karen Dombroski <[email protected]>
spi: spi-zynq-qspi: Fix stack violation bug
Saravana Kannan <[email protected]>
spi: Fix spi device unregister flow
Vijendar Mukunda <[email protected]>
ASoC: amd: fix for pcm_read() error
Marco Felsch <[email protected]>
ASoC: max98088: fix ni clock divider calculation
Kees Cook <[email protected]>
proc: Track /proc/$pid/attr/ opener mm_struct
-------------
Diffstat:
.../bindings/sound/amlogic,gx-sound-card.yaml | 4 +-
Documentation/virt/kvm/mmu.rst | 4 +-
Makefile | 9 +-
arch/arm/include/asm/cpuidle.h | 5 +-
arch/mips/lib/mips-atomic.c | 12 +-
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 +++
arch/x86/Makefile | 5 +-
arch/x86/events/intel/uncore_snbep.c | 9 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 4 +-
arch/x86/kvm/mmu/paging_tmpl.h | 14 +-
arch/x86/kvm/trace.h | 6 +-
arch/x86/kvm/x86.c | 13 ++
crypto/async_tx/async_xor.c | 3 +-
drivers/acpi/bus.c | 27 ++--
drivers/acpi/sleep.c | 4 +-
drivers/bus/mhi/pci_generic.c | 2 +-
drivers/gpio/gpio-wcd934x.c | 2 +-
drivers/gpu/drm/drm_auth.c | 3 +-
drivers/gpu/drm/drm_ioctl.c | 9 +-
drivers/gpu/drm/mcde/mcde_dsi.c | 2 +-
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 155 +++++++++++++++------
drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 2 +-
drivers/hwmon/corsair-psu.c | 14 ++
drivers/hwmon/tps23861.c | 17 ++-
drivers/i2c/busses/i2c-mpc.c | 95 ++++++++++++-
drivers/infiniband/core/uverbs_cmd.c | 5 +
drivers/infiniband/hw/mlx4/main.c | 8 +-
drivers/infiniband/hw/mlx5/cq.c | 9 +-
drivers/infiniband/hw/mlx5/doorbell.c | 7 +-
drivers/infiniband/hw/mlx5/fs.c | 11 +-
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 1 +
drivers/isdn/hardware/mISDN/netjet.c | 1 -
drivers/md/bcache/bcache.h | 1 -
drivers/md/bcache/request.c | 20 +--
drivers/md/bcache/stats.c | 14 --
drivers/md/bcache/stats.h | 1 -
drivers/md/bcache/sysfs.c | 4 -
drivers/md/dm-verity-verify-sig.c | 2 +-
drivers/misc/cardreader/rtl8411.c | 1 +
drivers/misc/cardreader/rts5209.c | 1 +
drivers/misc/cardreader/rts5227.c | 2 +
drivers/misc/cardreader/rts5228.c | 1 +
drivers/misc/cardreader/rts5229.c | 1 +
drivers/misc/cardreader/rts5249.c | 3 +
drivers/misc/cardreader/rts5260.c | 1 +
drivers/misc/cardreader/rts5261.c | 1 +
drivers/misc/cardreader/rtsx_pcr.c | 44 ++++--
drivers/mmc/host/renesas_sdhi_core.c | 9 +-
drivers/net/appletalk/cops.c | 4 +-
drivers/net/bonding/bond_main.c | 2 +-
drivers/net/dsa/microchip/ksz9477.c | 1 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +-
drivers/net/ethernet/cadence/macb_main.c | 3 +
drivers/net/ethernet/mellanox/mlx4/fw.c | 3 +
drivers/net/ethernet/mellanox/mlx4/fw.h | 1 +
drivers/net/ethernet/mellanox/mlx4/main.c | 6 +
drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
drivers/net/ethernet/sfc/nic.c | 1 +
drivers/net/phy/mdio_bus.c | 3 +-
drivers/nvme/host/Kconfig | 3 +-
drivers/nvme/host/fabrics.c | 5 +
drivers/nvme/target/core.c | 15 +-
drivers/nvme/target/nvmet.h | 2 +-
drivers/phy/broadcom/phy-brcm-usb-init.h | 4 +-
drivers/phy/cadence/phy-cadence-sierra.c | 1 +
drivers/phy/ti/phy-j721e-wiz.c | 1 +
drivers/pinctrl/qcom/Kconfig | 2 +-
drivers/pinctrl/qcom/pinctrl-sdx55.c | 18 +--
drivers/platform/surface/aggregator/controller.c | 2 +-
drivers/regulator/atc260x-regulator.c | 19 +--
drivers/regulator/bd718x7-regulator.c | 2 +-
drivers/regulator/core.c | 6 +
drivers/regulator/da9121-regulator.c | 10 +-
drivers/regulator/fan53880.c | 3 +
drivers/regulator/fixed.c | 7 +-
drivers/regulator/max77620-regulator.c | 7 +
drivers/regulator/rtmv20-regulator.c | 42 +++++-
drivers/regulator/scmi-regulator.c | 2 +-
drivers/s390/cio/vfio_ccw_drv.c | 12 +-
drivers/s390/cio/vfio_ccw_fsm.c | 1 +
drivers/s390/cio/vfio_ccw_ops.c | 2 -
drivers/scsi/bnx2fc/bnx2fc_io.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 +-
drivers/scsi/hosts.c | 47 ++++---
drivers/scsi/qla2xxx/qla_target.c | 2 +
drivers/scsi/vmw_pvscsi.c | 8 +-
drivers/spi/spi-bcm2835.c | 10 +-
drivers/spi/spi-bitbang.c | 18 ++-
drivers/spi/spi-fsl-spi.c | 4 +
drivers/spi/spi-omap-uwire.c | 9 +-
drivers/spi/spi-omap2-mcspi.c | 33 +++--
drivers/spi/spi-pxa2xx.c | 9 +-
drivers/spi/spi-sprd.c | 1 +
drivers/spi/spi-zynq-qspi.c | 7 +-
drivers/spi/spi.c | 20 ++-
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 2 +-
drivers/usb/cdns3/cdns3-gadget.c | 12 +-
drivers/usb/cdns3/cdnsp-ring.c | 7 +-
drivers/usb/chipidea/udc.c | 1 +
drivers/usb/dwc3/debug.h | 3 +
drivers/usb/dwc3/debugfs.c | 21 +--
drivers/usb/dwc3/dwc3-meson-g12a.c | 13 +-
drivers/usb/dwc3/ep0.c | 3 +
drivers/usb/dwc3/gadget.c | 18 ++-
drivers/usb/gadget/config.c | 8 ++
drivers/usb/gadget/function/f_ecm.c | 2 +-
drivers/usb/gadget/function/f_eem.c | 6 +-
drivers/usb/gadget/function/f_fs.c | 3 +
drivers/usb/gadget/function/f_hid.c | 3 +-
drivers/usb/gadget/function/f_loopback.c | 2 +-
drivers/usb/gadget/function/f_ncm.c | 10 +-
drivers/usb/gadget/function/f_printer.c | 3 +-
drivers/usb/gadget/function/f_rndis.c | 2 +-
drivers/usb/gadget/function/f_serial.c | 2 +-
drivers/usb/gadget/function/f_sourcesink.c | 3 +-
drivers/usb/gadget/function/f_subset.c | 2 +-
drivers/usb/gadget/function/f_tcm.c | 3 +-
drivers/usb/host/xhci-pci.c | 7 +-
drivers/usb/host/xhci.h | 1 +
drivers/usb/misc/brcmstb-usb-pinmap.c | 2 +
drivers/usb/musb/musb_core.c | 3 +-
drivers/usb/serial/cp210x.c | 84 ++++++++++-
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
drivers/usb/serial/omninet.c | 2 +
drivers/usb/serial/quatech2.c | 6 +-
drivers/usb/typec/mux.c | 2 +-
drivers/usb/typec/mux/intel_pmc_mux.c | 9 +-
drivers/usb/typec/tcpm/tcpm.c | 84 ++++++-----
drivers/usb/typec/tcpm/wcove.c | 2 +-
drivers/usb/typec/ucsi/ucsi.c | 1 +
fs/btrfs/disk-io.c | 26 ++--
fs/btrfs/file.c | 4 +-
fs/btrfs/tree-log.c | 16 +++
fs/btrfs/zoned.c | 23 ++-
fs/coredump.c | 2 +-
fs/nfs/client.c | 2 +-
fs/nfs/nfs4_fs.h | 1 +
fs/nfs/nfs4client.c | 2 +-
fs/nfs/nfs4proc.c | 29 +++-
fs/proc/base.c | 9 +-
include/asm-generic/vmlinux.lds.h | 1 +
include/dt-bindings/usb/pd.h | 20 +--
include/linux/entry-kvm.h | 3 +-
include/linux/kvm_host.h | 10 +-
include/linux/mfd/rohm-bd71828.h | 10 +-
include/linux/mlx4/device.h | 1 +
include/linux/rtsx_pci.h | 2 +
include/linux/sched.h | 8 ++
include/linux/tick.h | 7 +
include/linux/usb/pd.h | 2 +-
include/linux/usb/pd_ext_sdb.h | 4 -
kernel/bpf/btf.c | 12 ++
kernel/bpf/verifier.c | 14 ++
kernel/cgroup/cgroup-v1.c | 4 +
kernel/cgroup/cgroup.c | 13 +-
kernel/entry/common.c | 5 +-
kernel/events/core.c | 2 +
kernel/sched/debug.c | 3 +-
kernel/sched/fair.c | 18 +--
kernel/sched/pelt.h | 11 +-
kernel/time/tick-sched.c | 1 +
kernel/trace/ftrace.c | 8 +-
kernel/trace/trace.c | 2 +-
kernel/workqueue.c | 12 +-
net/netlink/af_netlink.c | 6 +-
net/nfc/rawsock.c | 2 +-
net/rds/connection.c | 23 ++-
net/rds/tcp.c | 4 +-
net/rds/tcp.h | 3 +-
net/rds/tcp_listen.c | 6 +
sound/core/seq/seq_timer.c | 10 +-
sound/firewire/amdtp-stream.c | 2 +-
sound/pci/hda/patch_realtek.c | 16 +++
sound/soc/amd/raven/acp3x-pcm-dma.c | 10 --
sound/soc/amd/raven/acp3x.h | 1 +
sound/soc/amd/raven/pci-acp3x.c | 15 ++
sound/soc/codecs/lpass-rx-macro.c | 1 +
sound/soc/codecs/lpass-tx-macro.c | 1 +
sound/soc/codecs/max98088.c | 13 +-
sound/soc/codecs/sti-sas.c | 1 +
sound/soc/intel/boards/bytcr_rt5640.c | 25 ++++
sound/soc/soc-core.c | 2 +
sound/soc/sof/pm.c | 1 +
tools/bootconfig/include/linux/bootconfig.h | 4 +
tools/bootconfig/main.c | 1 +
tools/perf/util/session.c | 1 +
tools/testing/selftests/bpf/verifier/stack_ptr.c | 2 -
.../selftests/bpf/verifier/value_ptr_arith.c | 8 --
190 files changed, 1249 insertions(+), 495 deletions(-)
From: Jeremy Szu <[email protected]>
commit 600dd2a7e8b62170d177381cc1303861f48f9780 upstream.
The HP ZBook Power G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8332,6 +8332,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x886d, "HP ZBook Fury 17.3 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8870, "HP ZBook Fury 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8873, "HP ZBook Studio 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
+ SND_PCI_QUIRK(0x103c, 0x888d, "HP ZBook Power 15.6 inch G8 Mobile Workstation PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
From: Lukas Wunner <[email protected]>
commit 13817d466eb8713a1ffd254f537402f091d48444 upstream.
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.
The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3: Slaves with a higher chipselect are
rejected by spi_add_device().
However the commit neglected that num_chipselect only limits the number
of *native* chipselects. If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].
As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves.
Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()")
Reported-by: Joe Burmeister <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v5.4+
Cc: Phil Elwell <[email protected]>
Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -68,7 +68,7 @@
#define BCM2835_SPI_FIFO_SIZE 64
#define BCM2835_SPI_FIFO_SIZE_3_4 48
#define BCM2835_SPI_DMA_MIN_LENGTH 96
-#define BCM2835_SPI_NUM_CS 4 /* raise as necessary */
+#define BCM2835_SPI_NUM_CS 24 /* raise as necessary */
#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
| SPI_NO_CS | SPI_3WIRE)
@@ -1195,6 +1195,12 @@ static int bcm2835_spi_setup(struct spi_
struct gpio_chip *chip;
u32 cs;
+ if (spi->chip_select >= BCM2835_SPI_NUM_CS) {
+ dev_err(&spi->dev, "only %d chip-selects supported\n",
+ BCM2835_SPI_NUM_CS - 1);
+ return -EINVAL;
+ }
+
/*
* Precalculate SPI slave's CS register value for ->prepare_message():
* The driver always uses software-controlled GPIO chip select, hence
@@ -1288,7 +1294,7 @@ static int bcm2835_spi_probe(struct plat
ctlr->use_gpio_descriptors = true;
ctlr->mode_bits = BCM2835_SPI_MODE_BITS;
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
- ctlr->num_chipselect = BCM2835_SPI_NUM_CS;
+ ctlr->num_chipselect = 3;
ctlr->setup = bcm2835_spi_setup;
ctlr->transfer_one = bcm2835_spi_transfer_one;
ctlr->handle_err = bcm2835_spi_handle_err;
From: Sagi Grimberg <[email protected]>
[ Upstream commit aaeadd7075dc9e184bc7876e9dd7b3bada771df2 ]
Controller teardown flow may take some time in case it has many I/O
queues, and the host may not send us keep-alive during this period.
Hence reset the traffic based keep-alive timer so we don't trigger
a controller teardown as a result of a keep-alive expiration.
Reported-by: Yi Zhang <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/core.c | 15 +++++++++++----
drivers/nvme/target/nvmet.h | 2 +-
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 7d16cb4cd8ac..83921dab8368 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -388,10 +388,10 @@ static void nvmet_keep_alive_timer(struct work_struct *work)
{
struct nvmet_ctrl *ctrl = container_of(to_delayed_work(work),
struct nvmet_ctrl, ka_work);
- bool cmd_seen = ctrl->cmd_seen;
+ bool reset_tbkas = ctrl->reset_tbkas;
- ctrl->cmd_seen = false;
- if (cmd_seen) {
+ ctrl->reset_tbkas = false;
+ if (reset_tbkas) {
pr_debug("ctrl %d reschedule traffic based keep-alive timer\n",
ctrl->cntlid);
schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
@@ -804,6 +804,13 @@ void nvmet_sq_destroy(struct nvmet_sq *sq)
percpu_ref_exit(&sq->ref);
if (ctrl) {
+ /*
+ * The teardown flow may take some time, and the host may not
+ * send us keep-alive during this period, hence reset the
+ * traffic based keep-alive timer so we don't trigger a
+ * controller teardown as a result of a keep-alive expiration.
+ */
+ ctrl->reset_tbkas = true;
nvmet_ctrl_put(ctrl);
sq->ctrl = NULL; /* allows reusing the queue later */
}
@@ -953,7 +960,7 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq,
}
if (sq->ctrl)
- sq->ctrl->cmd_seen = true;
+ sq->ctrl->reset_tbkas = true;
return true;
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 5aad34b106dc..43a668dc8bc4 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -166,7 +166,7 @@ struct nvmet_ctrl {
struct nvmet_subsys *subsys;
struct nvmet_sq **sqs;
- bool cmd_seen;
+ bool reset_tbkas;
struct mutex lock;
u64 cap;
--
2.30.2
From: Jeremy Szu <[email protected]>
commit 61d3e87468fad82dc8e8cb6de7db563ada64b532 upstream.
The HP EliteBook x360 1040 G8 using ALC285 codec which using 0x04 to control
mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8308,6 +8308,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO),
SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
+ SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8730, "HP ProBook 445 G7", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
From: Íñigo Huguet <[email protected]>
[ Upstream commit 8f03eeb6e0a0a0b8d617ee0a4bce729e47130036 ]
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1'
WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170
...trimmed...
Call Trace:
unregister_irq_proc+0xe3/0x100
free_desc+0x29/0x70
irq_free_descs+0x47/0x70
mp_unmap_irq+0x58/0x60
acpi_unregister_gsi_ioapic+0x2a/0x40
acpi_pci_irq_disable+0x78/0xb0
pci_disable_device+0xd1/0x100
efx_pci_remove+0xa1/0x1e0 [sfc]
pci_device_remove+0x38/0xa0
__device_release_driver+0x177/0x230
driver_detach+0xcb/0x110
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x2a/0xb0
efx_exit_module+0x24/0xf40 [sfc]
__do_sys_delete_module.constprop.0+0x171/0x280
? exit_to_user_mode_prepare+0x83/0x1d0
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9f9385800b
...trimmed...
Signed-off-by: Íñigo Huguet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/nic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c
index d1e908846f5d..22fbb0ae77fb 100644
--- a/drivers/net/ethernet/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
@@ -90,6 +90,7 @@ int efx_nic_init_interrupt(struct efx_nic *efx)
efx->pci_dev->irq);
goto fail1;
}
+ efx->irqs_hooked = true;
return 0;
}
--
2.30.2
From: Chris Packham <[email protected]>
[ Upstream commit drivers/i2c/busses/i2c-mpc.c ]
The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mpc.c | 79 +++++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 6a0d55e9e8e3..af349661fd76 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -23,6 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -49,6 +50,7 @@
#define CCR_MTX 0x10
#define CCR_TXAK 0x08
#define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
#define CSR_MCF 0x80
#define CSR_MAAS 0x40
@@ -70,6 +72,7 @@ struct mpc_i2c {
u8 fdr, dfsrr;
#endif
struct clk *clk_per;
+ bool has_errata_A004447;
};
struct mpc_i2c_divider {
@@ -176,6 +179,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+ void __iomem *addr = i2c->base + MPC_I2C_SR;
+ u8 val;
+
+ return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1. Set up the frequency divider and sampling rate.
+ * 2. I2CCR - a0h
+ * 3. Poll for I2CSR[MBB] to get set.
+ * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ * step 5. If MAL is not set, then go to step 13.
+ * 5. I2CCR - 00h
+ * 6. I2CCR - 22h
+ * 7. I2CCR - a2h
+ * 8. Poll for I2CSR[MBB] to get set.
+ * 9. Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+ int ret;
+ u32 val;
+
+ writeccr(i2c, CCR_MEN | CCR_MSTA);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+
+ val = readb(i2c->base + MPC_I2C_SR);
+
+ if (val & CSR_MAL) {
+ writeccr(i2c, 0x00);
+ writeccr(i2c, CCR_MSTA | CCR_RSVD);
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN | CCR_RSVD);
+ } else {
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN);
+ }
+}
+
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -641,7 +713,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
{
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
- mpc_i2c_fixup(i2c);
+ if (i2c->has_errata_A004447)
+ mpc_i2c_fixup_A004447(i2c);
+ else
+ mpc_i2c_fixup(i2c);
return 0;
}
@@ -745,6 +820,8 @@ static int fsl_i2c_probe(struct platform_device *op)
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
platform_set_drvdata(op, i2c);
+ if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+ i2c->has_errata_A004447 = true;
i2c->adap = mpc_ops;
of_address_to_resource(op->dev.of_node, 0, &res);
--
2.30.2
From: Lukas Wunner <[email protected]>
[ Upstream commit 2ec6f20b33eb4f62ab90bdcd620436c883ec3af6 ]
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the
SPI core's behavior if the ->setup() hook returns an error upon adding
an spi_device: Before, the ->cleanup() hook was invoked to free any
allocations that were made by ->setup(). With the commit, that's no
longer the case, so the ->setup() hook is expected to free the
allocations itself.
I've identified 5 drivers which depend on the old behavior and am fixing
them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c spi-pxa2xx.c
Importantly, ->setup() is not only invoked on spi_device *addition*:
It may subsequently be called to *change* SPI parameters. If changing
these SPI parameters fails, freeing memory allocations would be wrong.
That should only be done if the spi_device is finally destroyed.
I am therefore using a bool "initial_setup" in 4 of the affected drivers
to differentiate between the invocation on *adding* the spi_device and
any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c
spi-omap2-mcspi.c
In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device
addition, not any subsequent calls. It therefore doesn't need the bool.
It's worth noting that 5 other drivers already perform a cleanup if the
->setup() hook fails. Before c7299fea6769, they caused a double-free
if ->setup() failed on spi_device addition. Since the commit, they're
fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c
spi-st-ssc4.c spi-tegra114.c
(spi-pxa2xx.c also already performs a cleanup, but only in one of
several error paths.)
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: Saravana Kannan <[email protected]>
Acked-by: Andy Shevchenko <[email protected]> # pxa2xx
Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-bitbang.c | 18 ++++++++++++++----
drivers/spi/spi-fsl-spi.c | 4 ++++
drivers/spi/spi-omap-uwire.c | 9 ++++++++-
drivers/spi/spi-omap2-mcspi.c | 33 ++++++++++++++++++++-------------
drivers/spi/spi-pxa2xx.c | 9 ++++++++-
5 files changed, 54 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 1a7352abd878..3d8948a17095 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -181,6 +181,8 @@ int spi_bitbang_setup(struct spi_device *spi)
{
struct spi_bitbang_cs *cs = spi->controller_state;
struct spi_bitbang *bitbang;
+ bool initial_setup = false;
+ int retval;
bitbang = spi_master_get_devdata(spi->master);
@@ -189,22 +191,30 @@ int spi_bitbang_setup(struct spi_device *spi)
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
+ initial_setup = true;
}
/* per-word shift register access, in hardware or bitbanging */
cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
- if (!cs->txrx_word)
- return -EINVAL;
+ if (!cs->txrx_word) {
+ retval = -EINVAL;
+ goto err_free;
+ }
if (bitbang->setup_transfer) {
- int retval = bitbang->setup_transfer(spi, NULL);
+ retval = bitbang->setup_transfer(spi, NULL);
if (retval < 0)
- return retval;
+ goto err_free;
}
dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs);
return 0;
+
+err_free:
+ if (initial_setup)
+ kfree(cs);
+ return retval;
}
EXPORT_SYMBOL_GPL(spi_bitbang_setup);
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index d0e5aa18b7ba..bdf94cc7be1a 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -440,6 +440,7 @@ static int fsl_spi_setup(struct spi_device *spi)
{
struct mpc8xxx_spi *mpc8xxx_spi;
struct fsl_spi_reg __iomem *reg_base;
+ bool initial_setup = false;
int retval;
u32 hw_mode;
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
@@ -452,6 +453,7 @@ static int fsl_spi_setup(struct spi_device *spi)
if (!cs)
return -ENOMEM;
spi_set_ctldata(spi, cs);
+ initial_setup = true;
}
mpc8xxx_spi = spi_master_get_devdata(spi->master);
@@ -475,6 +477,8 @@ static int fsl_spi_setup(struct spi_device *spi)
retval = fsl_spi_setup_transfer(spi, NULL);
if (retval < 0) {
cs->hw_mode = hw_mode; /* Restore settings */
+ if (initial_setup)
+ kfree(cs);
return retval;
}
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 71402f71ddd8..df28c6664aba 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -424,15 +424,22 @@ done:
static int uwire_setup(struct spi_device *spi)
{
struct uwire_state *ust = spi->controller_state;
+ bool initial_setup = false;
+ int status;
if (ust == NULL) {
ust = kzalloc(sizeof(*ust), GFP_KERNEL);
if (ust == NULL)
return -ENOMEM;
spi->controller_state = ust;
+ initial_setup = true;
}
- return uwire_setup_transfer(spi, NULL);
+ status = uwire_setup_transfer(spi, NULL);
+ if (status && initial_setup)
+ kfree(ust);
+
+ return status;
}
static void uwire_cleanup(struct spi_device *spi)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index d4c9510af393..3596bbe4b776 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1032,8 +1032,22 @@ static void omap2_mcspi_release_dma(struct spi_master *master)
}
}
+static void omap2_mcspi_cleanup(struct spi_device *spi)
+{
+ struct omap2_mcspi_cs *cs;
+
+ if (spi->controller_state) {
+ /* Unlink controller state from context save list */
+ cs = spi->controller_state;
+ list_del(&cs->node);
+
+ kfree(cs);
+ }
+}
+
static int omap2_mcspi_setup(struct spi_device *spi)
{
+ bool initial_setup = false;
int ret;
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
@@ -1051,35 +1065,28 @@ static int omap2_mcspi_setup(struct spi_device *spi)
spi->controller_state = cs;
/* Link this to context save list */
list_add_tail(&cs->node, &ctx->cs);
+ initial_setup = true;
}
ret = pm_runtime_get_sync(mcspi->dev);
if (ret < 0) {
pm_runtime_put_noidle(mcspi->dev);
+ if (initial_setup)
+ omap2_mcspi_cleanup(spi);
return ret;
}
ret = omap2_mcspi_setup_transfer(spi, NULL);
+ if (ret && initial_setup)
+ omap2_mcspi_cleanup(spi);
+
pm_runtime_mark_last_busy(mcspi->dev);
pm_runtime_put_autosuspend(mcspi->dev);
return ret;
}
-static void omap2_mcspi_cleanup(struct spi_device *spi)
-{
- struct omap2_mcspi_cs *cs;
-
- if (spi->controller_state) {
- /* Unlink controller state from context save list */
- cs = spi->controller_state;
- list_del(&cs->node);
-
- kfree(cs);
- }
-}
-
static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
{
struct omap2_mcspi *mcspi = data;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 0cc767283674..825cc5b2ab2f 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1254,6 +1254,8 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
err = gpiod_direction_output(gpiod, !chip->gpio_cs_inverted);
+ if (err)
+ gpiod_put(chip->gpiod_cs);
}
return err;
@@ -1267,6 +1269,7 @@ static int setup(struct spi_device *spi)
struct driver_data *drv_data =
spi_controller_get_devdata(spi->controller);
uint tx_thres, tx_hi_thres, rx_thres;
+ int err;
switch (drv_data->ssp_type) {
case QUARK_X1000_SSP:
@@ -1413,7 +1416,11 @@ static int setup(struct spi_device *spi)
if (drv_data->ssp_type == CE4100_SSP)
return 0;
- return setup_cs(spi, chip, chip_info);
+ err = setup_cs(spi, chip, chip_info);
+ if (err)
+ kfree(chip);
+
+ return err;
}
static void cleanup(struct spi_device *spi)
--
2.30.2
From: Chris Packham <[email protected]>
[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ]
The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 1b4aafc1f6a2..9716a0484ecf 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -122,7 +122,15 @@
};
/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ fsl,i2c-erratum-a004447;
+ };
+
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
--
2.30.2
From: Ritesh Harjani <[email protected]>
commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream.
We always return 0 even in case of an error in btrfs_mark_extent_written().
Fix it to return proper error value in case of a failure. All callers
handle it.
CC: [email protected] # 4.4+
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/file.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1094,7 +1094,7 @@ int btrfs_mark_extent_written(struct btr
int del_nr = 0;
int del_slot = 0;
int recow;
- int ret;
+ int ret = 0;
u64 ino = btrfs_ino(inode);
path = btrfs_alloc_path();
@@ -1315,7 +1315,7 @@ again:
}
out:
btrfs_free_path(path);
- return 0;
+ return ret;
}
/*
From: Mika Westerberg <[email protected]>
commit 159d8c274fd92438ca6d7068d7a5eeda157227f4 upstream.
Commit 719e1f561afb ("ACPI: Execute platform _OSC also with query bit
clear") makes acpi_bus_osc_negotiate_platform_control() not only query
the platforms capabilities but it also commits the result back to the
firmware to report which capabilities are supported by the OS back to
the firmware
On certain systems the BIOS loads SSDT tables dynamically based on the
capabilities the OS claims to support. However, on these systems the
_OSC actually clears some of the bits (under certain conditions) so what
happens is that now when we call the _OSC twice the second time we pass
the cleared values and that results errors like below to appear on the
system log:
ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210105/psargs-330)
ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210105/psparse-529)
In addition the ACPI 6.4 spec says following [1]:
If the OS declares support of a feature in the Support Field in one
call to _OSC, then it must preserve the set state of that bit
(declaring support for that feature) in all subsequent calls.
Based on the above we can fix the issue by passing the same set of
capabilities to the platform wide _OSC in both calls regardless of the
query flag.
While there drop the context.ret.length checks which were wrong to begin
with (as the length is number of bytes not elements). This is already
checked in acpi_run_osc() that also returns an error in that case.
Includes fixes by Hans de Goede.
[1] https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#sequence-of-osc-calls
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213023
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1963717
Fixes: 719e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
Cc: 5.12+ <[email protected]> # 5.12+
Signed-off-by: Mika Westerberg <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/bus.c | 27 ++++++++-------------------
1 file changed, 8 insertions(+), 19 deletions(-)
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -330,32 +330,21 @@ static void acpi_bus_osc_negotiate_platf
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
- capbuf_ret = context.ret.pointer;
- if (context.ret.length <= OSC_SUPPORT_DWORD) {
- kfree(context.ret.pointer);
- return;
- }
+ kfree(context.ret.pointer);
- /*
- * Now run _OSC again with query flag clear and with the caps
- * supported by both the OS and the platform.
- */
+ /* Now run _OSC again with query flag clear */
capbuf[OSC_QUERY_DWORD] = 0;
- capbuf[OSC_SUPPORT_DWORD] = capbuf_ret[OSC_SUPPORT_DWORD];
- kfree(context.ret.pointer);
if (ACPI_FAILURE(acpi_run_osc(handle, &context)))
return;
capbuf_ret = context.ret.pointer;
- if (context.ret.length > OSC_SUPPORT_DWORD) {
- osc_sb_apei_support_acked =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
- osc_pc_lpi_support_confirmed =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
- osc_sb_native_usb4_support_confirmed =
- capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT;
- }
+ osc_sb_apei_support_acked =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT;
+ osc_pc_lpi_support_confirmed =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT;
+ osc_sb_native_usb4_support_confirmed =
+ capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT;
kfree(context.ret.pointer);
}
From: Desmond Cheong Zhi Xi <[email protected]>
commit b436acd1cf7fac0ba987abd22955d98025c80c2b upstream.
There is a time-of-check-to-time-of-use error in drm_getunique() due
to retrieving file_priv->master prior to locking the device's master
mutex.
An example can be seen in the crash report of the use-after-free error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the report, the master pointer was used after being freed. This is
because another process had acquired the device's master mutex in
drm_setmaster_ioctl(), then overwrote fpriv->master in
drm_new_set_master(). The old value of fpriv->master was subsequently
freed before the mutex was unlocked.
To fix this, we lock the device's master mutex before retrieving the
pointer from from fpriv->master. This patch passes the Syzbot
reproducer test.
Reported-by: [email protected]
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_ioctl.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -118,17 +118,18 @@ int drm_getunique(struct drm_device *dev
struct drm_file *file_priv)
{
struct drm_unique *u = data;
- struct drm_master *master = file_priv->master;
+ struct drm_master *master;
- mutex_lock(&master->dev->master_mutex);
+ mutex_lock(&dev->master_mutex);
+ master = file_priv->master;
if (u->unique_len >= master->unique_len) {
if (copy_to_user(u->unique, master->unique, master->unique_len)) {
- mutex_unlock(&master->dev->master_mutex);
+ mutex_unlock(&dev->master_mutex);
return -EFAULT;
}
}
u->unique_len = master->unique_len;
- mutex_unlock(&master->dev->master_mutex);
+ mutex_unlock(&dev->master_mutex);
return 0;
}
From: Zheyu Ma <[email protected]>
[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ]
When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
The KASAN's log reveals it:
[ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[ 3.238748 ] 2 locks held by swapper/0/1:
[ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[ 3.240873 ] Modules linked in:
[ 3.241187 ] irq event stamp: 460854
[ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[ 3.242245 ] Preemption disabled at:
[ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] Kernel panic - not syncing: scheduling while atomic
[ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[ 3.242245 ] Call Trace:
[ 3.242245 ] dump_stack+0xba/0xf5
[ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0
[ 3.242245 ] panic+0x15a/0x3f2
[ 3.242245 ] ? vprintk+0x76/0x150
[ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] __schedule_bug+0xae/0xe0
[ 3.242245 ] __schedule+0x72e/0xa00
[ 3.242245 ] schedule+0x43/0xf0
[ 3.242245 ] schedule_timeout+0x28b/0x500
[ 3.242245 ] ? del_timer_sync+0xf0/0xf0
[ 3.242245 ] ? msleep+0x2f/0x70
[ 3.242245 ] msleep+0x59/0x70
[ 3.242245 ] ql3xxx_probe+0x307/0xea0
[ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70
[ 3.242245 ] ? pci_device_remove+0x110/0x110
[ 3.242245 ] local_pci_probe+0x45/0xa0
[ 3.242245 ] pci_device_probe+0x12b/0x1d0
[ 3.242245 ] really_probe+0x2a9/0x610
[ 3.242245 ] driver_probe_device+0x90/0x1d0
[ 3.242245 ] ? mutex_lock_nested+0x1b/0x20
[ 3.242245 ] device_driver_attach+0x68/0x70
[ 3.242245 ] __driver_attach+0x124/0x1b0
[ 3.242245 ] ? device_driver_attach+0x70/0x70
[ 3.242245 ] bus_for_each_dev+0xbb/0x110
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] driver_attach+0x27/0x30
[ 3.242245 ] bus_add_driver+0x1eb/0x2a0
[ 3.242245 ] driver_register+0xa9/0x180
[ 3.242245 ] __pci_register_driver+0x82/0x90
[ 3.242245 ] ? yellowfin_init+0x25/0x25
[ 3.242245 ] ql3xxx_driver_init+0x23/0x25
[ 3.242245 ] do_one_initcall+0x7f/0x3d0
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.242245 ] kernel_init_freeable+0x2aa/0x301
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] kernel_init+0x18/0x190
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ret_from_fork+0x1f/0x30
[ 3.242245 ] Dumping ftrace buffer:
[ 3.242245 ] (ftrace buffer empty)
[ 3.242245 ] Kernel Offset: disabled
[ 3.242245 ] Rebooting in 1 seconds.
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 214e347097a7..2376b2729633 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -114,7 +114,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev,
value = readl(&port_regs->CommonRegs.semaphoreReg);
if ((value & (sem_mask >> 16)) == sem_bits)
return 0;
- ssleep(1);
+ mdelay(1000);
} while (--seconds);
return -1;
}
--
2.30.2
From: Coly Li <[email protected]>
commit 1616a4c2ab1a80893b6890ae93da40a2b1d0c691 upstream.
For read cache missing, bcache defines a readahead size for the read I/O
request to the backing device for the missing data. This readahead size
is initialized to 0, and almost no one uses it to avoid unnecessary read
amplifying onto backing device and write amplifying onto cache device.
Considering upper layer file system code has readahead logic allready
and works fine with readahead_cache_policy sysfile interface, we don't
have to keep bcache self-defined readahead anymore.
This patch removes the bcache self-defined readahead for cache missing
request for backing device, and the readahead sysfs file interfaces are
removed as well.
This is the preparation for next patch to fix potential kernel panic due
to oversized request in a simpler method.
Reported-by: Alexander Ullrich <[email protected]>
Reported-by: Diego Ercolani <[email protected]>
Reported-by: Jan Szubiak <[email protected]>
Reported-by: Marco Rebhan <[email protected]>
Reported-by: Matthias Ferdinand <[email protected]>
Reported-by: Victor Westerhuis <[email protected]>
Reported-by: Vojtech Pavlik <[email protected]>
Reported-and-tested-by: Rolf Fokkens <[email protected]>
Reported-and-tested-by: Thorsten Knabe <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: [email protected]
Cc: Kent Overstreet <[email protected]>
Cc: Nix <[email protected]>
Cc: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/bcache.h | 1 -
drivers/md/bcache/request.c | 13 +------------
drivers/md/bcache/stats.c | 14 --------------
drivers/md/bcache/stats.h | 1 -
drivers/md/bcache/sysfs.c | 4 ----
5 files changed, 1 insertion(+), 32 deletions(-)
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -364,7 +364,6 @@ struct cached_dev {
/* The rest of this all shows up in sysfs */
unsigned int sequential_cutoff;
- unsigned int readahead;
unsigned int io_disable:1;
unsigned int verify:1;
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -880,7 +880,6 @@ static int cached_dev_cache_miss(struct
struct bio *bio, unsigned int sectors)
{
int ret = MAP_CONTINUE;
- unsigned int reada = 0;
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
struct bio *miss, *cache_bio;
@@ -892,14 +891,7 @@ static int cached_dev_cache_miss(struct
goto out_submit;
}
- if (!(bio->bi_opf & REQ_RAHEAD) &&
- !(bio->bi_opf & (REQ_META|REQ_PRIO)) &&
- s->iop.c->gc_stats.in_use < CUTOFF_CACHE_READA)
- reada = min_t(sector_t, dc->readahead >> 9,
- get_capacity(bio->bi_bdev->bd_disk) -
- bio_end_sector(bio));
-
- s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada);
+ s->insert_bio_sectors = min(sectors, bio_sectors(bio));
s->iop.replace_key = KEY(s->iop.inode,
bio->bi_iter.bi_sector + s->insert_bio_sectors,
@@ -933,9 +925,6 @@ static int cached_dev_cache_miss(struct
if (bch_bio_alloc_pages(cache_bio, __GFP_NOWARN|GFP_NOIO))
goto out_put;
- if (reada)
- bch_mark_cache_readahead(s->iop.c, s->d);
-
s->cache_miss = miss;
s->iop.bio = cache_bio;
bio_get(cache_bio);
--- a/drivers/md/bcache/stats.c
+++ b/drivers/md/bcache/stats.c
@@ -46,7 +46,6 @@ read_attribute(cache_misses);
read_attribute(cache_bypass_hits);
read_attribute(cache_bypass_misses);
read_attribute(cache_hit_ratio);
-read_attribute(cache_readaheads);
read_attribute(cache_miss_collisions);
read_attribute(bypassed);
@@ -64,7 +63,6 @@ SHOW(bch_stats)
DIV_SAFE(var(cache_hits) * 100,
var(cache_hits) + var(cache_misses)));
- var_print(cache_readaheads);
var_print(cache_miss_collisions);
sysfs_hprint(bypassed, var(sectors_bypassed) << 9);
#undef var
@@ -86,7 +84,6 @@ static struct attribute *bch_stats_files
&sysfs_cache_bypass_hits,
&sysfs_cache_bypass_misses,
&sysfs_cache_hit_ratio,
- &sysfs_cache_readaheads,
&sysfs_cache_miss_collisions,
&sysfs_bypassed,
NULL
@@ -113,7 +110,6 @@ void bch_cache_accounting_clear(struct c
acc->total.cache_misses = 0;
acc->total.cache_bypass_hits = 0;
acc->total.cache_bypass_misses = 0;
- acc->total.cache_readaheads = 0;
acc->total.cache_miss_collisions = 0;
acc->total.sectors_bypassed = 0;
}
@@ -145,7 +141,6 @@ static void scale_stats(struct cache_sta
scale_stat(&stats->cache_misses);
scale_stat(&stats->cache_bypass_hits);
scale_stat(&stats->cache_bypass_misses);
- scale_stat(&stats->cache_readaheads);
scale_stat(&stats->cache_miss_collisions);
scale_stat(&stats->sectors_bypassed);
}
@@ -168,7 +163,6 @@ static void scale_accounting(struct time
move_stat(cache_misses);
move_stat(cache_bypass_hits);
move_stat(cache_bypass_misses);
- move_stat(cache_readaheads);
move_stat(cache_miss_collisions);
move_stat(sectors_bypassed);
@@ -209,14 +203,6 @@ void bch_mark_cache_accounting(struct ca
mark_cache_stats(&c->accounting.collector, hit, bypass);
}
-void bch_mark_cache_readahead(struct cache_set *c, struct bcache_device *d)
-{
- struct cached_dev *dc = container_of(d, struct cached_dev, disk);
-
- atomic_inc(&dc->accounting.collector.cache_readaheads);
- atomic_inc(&c->accounting.collector.cache_readaheads);
-}
-
void bch_mark_cache_miss_collision(struct cache_set *c, struct bcache_device *d)
{
struct cached_dev *dc = container_of(d, struct cached_dev, disk);
--- a/drivers/md/bcache/stats.h
+++ b/drivers/md/bcache/stats.h
@@ -7,7 +7,6 @@ struct cache_stat_collector {
atomic_t cache_misses;
atomic_t cache_bypass_hits;
atomic_t cache_bypass_misses;
- atomic_t cache_readaheads;
atomic_t cache_miss_collisions;
atomic_t sectors_bypassed;
};
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -137,7 +137,6 @@ rw_attribute(io_disable);
rw_attribute(discard);
rw_attribute(running);
rw_attribute(label);
-rw_attribute(readahead);
rw_attribute(errors);
rw_attribute(io_error_limit);
rw_attribute(io_error_halflife);
@@ -260,7 +259,6 @@ SHOW(__bch_cached_dev)
var_printf(partial_stripes_expensive, "%u");
var_hprint(sequential_cutoff);
- var_hprint(readahead);
sysfs_print(running, atomic_read(&dc->running));
sysfs_print(state, states[BDEV_STATE(&dc->sb)]);
@@ -365,7 +363,6 @@ STORE(__cached_dev)
sysfs_strtoul_clamp(sequential_cutoff,
dc->sequential_cutoff,
0, UINT_MAX);
- d_strtoi_h(readahead);
if (attr == &sysfs_clear_stats)
bch_cache_accounting_clear(&dc->accounting);
@@ -538,7 +535,6 @@ static struct attribute *bch_cached_dev_
&sysfs_running,
&sysfs_state,
&sysfs_label,
- &sysfs_readahead,
#ifdef CONFIG_BCACHE_DEBUG
&sysfs_verify,
&sysfs_bypass_torture_test,
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ]
Target de-configuration panics at high CPU load because TPGT and WWPN can
be removed on separate threads.
TPGT removal requests a reset HBA on a separate thread and waits for reset
complete (phase1). Due to high CPU load that HBA reset can be delayed for
some time.
WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has
already completed and thus tgt.tgt_ops is subsequently cleared. However,
tgt.tgt_ops is needed to process incoming traffic and therefore this will
cause one of the following panics:
NIP qlt_reset+0x7c/0x220 [qla2xxx]
LR qlt_reset+0x68/0x220 [qla2xxx]
Call Trace:
0xc000003ffff63a78 (unreliable)
qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx]
qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx]
qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx]
LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx]
Call Trace:
qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable)
qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx]
qla83xx_msix_atio_q+0x54/0x90 [qla2xxx]
or
NIP qlt_create_sess+0x90/0x4e0 [qla2xxx]
LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
Call Trace:
0xc0000000348fba30 (unreliable)
qla24xx_do_nack_work+0xa8/0x180 [qla2xxx]
qla2x00_do_work+0x674/0xbf0 [qla2xxx]
qla2x00_iocb_work_fn
The patch fixes the issue by serializing qlt_stop_phase1() and
qlt_stop_phase2() functions to make WWPN removal wait for phase1
completion.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Roman Bolshakov <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 480e7d2dcf3e..745d6d98c02e 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1558,10 +1558,12 @@ void qlt_stop_phase2(struct qla_tgt *tgt)
return;
}
+ mutex_lock(&tgt->ha->optrom_mutex);
mutex_lock(&vha->vha_tgt.tgt_mutex);
tgt->tgt_stop = 0;
tgt->tgt_stopped = 1;
mutex_unlock(&vha->vha_tgt.tgt_mutex);
+ mutex_unlock(&tgt->ha->optrom_mutex);
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished\n",
tgt);
--
2.30.2
From: Zhang Rui <[email protected]>
commit f1ffa9d4cccc8fdf6c03fb1b3429154d22037988 upstream.
Commit 95722237cb2a ("ACPI: sleep: Put the FACS table after using it")
puts the FACS table during initialization.
But the hardware signature bits in the FACS table need to be accessed,
after every hibernation, to compare with the original hardware
signature.
So there is no reason to release the FACS table mapping after
initialization.
This reverts commit 95722237cb2ae4f7b73471058cdb19e8f4057c93.
An alternative solution is to use acpi_gbl_FACS variable instead, which
is mapped by the ACPICA core and never released.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212277
Reported-by: Stephan Hohe <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Cc: 5.8+ <[email protected]> # 5.8+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/sleep.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -1009,10 +1009,8 @@ static void acpi_sleep_hibernate_setup(v
return;
acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
- if (facs) {
+ if (facs)
s4_hardware_signature = facs->hardware_signature;
- acpi_put_table((struct acpi_table_header *)facs);
- }
}
#else /* !CONFIG_HIBERNATION */
static inline void acpi_sleep_hibernate_setup(void) {}
From: Saubhik Mukherjee <[email protected]>
[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ]
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/appletalk/cops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index ba8e70a8e312..6b12ce822e51 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -327,6 +327,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
break;
}
+ dev->base_addr = ioaddr;
+
/* Reserve any actual interrupt. */
if (dev->irq) {
retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev);
@@ -334,8 +336,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr)
goto err_out;
}
- dev->base_addr = ioaddr;
-
lp = netdev_priv(dev);
spin_lock_init(&lp->lock);
--
2.30.2
From: Naohiro Aota <[email protected]>
commit 5b434df8778771d181bc19fb4593bca114d1c4eb upstream.
In btrfs_get_dev_zone_info(), we have "u32 sb_zone" and calculate "sector_t
sector" by shifting it. But, this "sector" is calculated in 32bit, leading
it to be 0 for the 2nd superblock copy.
Since zone number is u32, shifting it to sector (sector_t) or physical
address (u64) can easily trigger a missing cast bug like this.
This commit introduces helpers to convert zone number to sector/LBA, so we
won't fall into the same pitfall again.
Reported-by: Dmitry Fomichev <[email protected]>
Fixes: 12659251ca5d ("btrfs: implement log-structured superblock for ZONED mode")
CC: [email protected] # 5.11+
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Naohiro Aota <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/zoned.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -150,6 +150,18 @@ static inline u32 sb_zone_number(int shi
return (u32)zone;
}
+static inline sector_t zone_start_sector(u32 zone_number,
+ struct block_device *bdev)
+{
+ return (sector_t)zone_number << ilog2(bdev_zone_sectors(bdev));
+}
+
+static inline u64 zone_start_physical(u32 zone_number,
+ struct btrfs_zoned_device_info *zone_info)
+{
+ return (u64)zone_number << zone_info->zone_size_shift;
+}
+
/*
* Emulate blkdev_report_zones() for a non-zoned device. It slices up the block
* device into static sized chunks and fake a conventional zone on each of
@@ -405,8 +417,8 @@ int btrfs_get_dev_zone_info(struct btrfs
if (sb_zone + 1 >= zone_info->nr_zones)
continue;
- sector = sb_zone << (zone_info->zone_size_shift - SECTOR_SHIFT);
- ret = btrfs_get_dev_zones(device, sector << SECTOR_SHIFT,
+ ret = btrfs_get_dev_zones(device,
+ zone_start_physical(sb_zone, zone_info),
&zone_info->sb_zones[sb_pos],
&nr_zones);
if (ret)
@@ -721,7 +733,7 @@ int btrfs_sb_log_location_bdev(struct bl
if (sb_zone + 1 >= nr_zones)
return -ENOENT;
- ret = blkdev_report_zones(bdev, sb_zone << zone_sectors_shift,
+ ret = blkdev_report_zones(bdev, zone_start_sector(sb_zone, bdev),
BTRFS_NR_SB_LOG_ZONES, copy_zone_info_cb,
zones);
if (ret < 0)
@@ -826,7 +838,7 @@ int btrfs_reset_sb_log_zones(struct bloc
return -ENOENT;
return blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET,
- sb_zone << zone_sectors_shift,
+ zone_start_sector(sb_zone, bdev),
zone_sectors * BTRFS_NR_SB_LOG_ZONES, GFP_NOFS);
}
@@ -878,7 +890,8 @@ u64 btrfs_find_allocatable_zones(struct
if (!(end <= sb_zone ||
sb_zone + BTRFS_NR_SB_LOG_ZONES <= begin)) {
have_sb = true;
- pos = ((u64)sb_zone + BTRFS_NR_SB_LOG_ZONES) << shift;
+ pos = zone_start_physical(
+ sb_zone + BTRFS_NR_SB_LOG_ZONES, zinfo);
break;
}
From: Javed Hasan <[email protected]>
[ Upstream commit 122c81c563b0c1c6b15ff76a9159af5ee1f21563 ]
Return failure from bnx2fc_eh_abort() if io_req is already in ABTS
processing.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Javed Hasan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bnx2fc/bnx2fc_io.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 1a0dc18d6915..ed300a279a38 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1220,6 +1220,7 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd)
was a result from the ABTS request rather than the CLEANUP
request */
set_bit(BNX2FC_FLAG_IO_CLEANUP, &io_req->req_flags);
+ rc = FAILED;
goto done;
}
--
2.30.2
From: Josef Bacik <[email protected]>
commit 165ea85f14831f27fc6fe3b02b35e42e50b9ed94 upstream.
Error injection testing uncovered a pretty severe problem where we could
end up committing a super that pointed to the wrong tree roots,
resulting in transid mismatch errors.
The way we commit the transaction is we update the super copy with the
current generations and bytenrs of the important roots, and then copy
that into our super_for_commit. Then we allow transactions to continue
again, we write out the dirty pages for the transaction, and then we
write the super. If the write out fails we'll bail and skip writing the
supers.
However since we've allowed a new transaction to start, we can have a
log attempting to sync at this point, which would be blocked on
fs_info->tree_log_mutex. Once the commit fails we're allowed to do the
log tree commit, which uses super_for_commit, which now points at fs
tree's that were not written out.
Fix this by checking BTRFS_FS_STATE_ERROR once we acquire the
tree_log_mutex. This way if the transaction commit fails we're sure to
see this bit set and we can skip writing the super out. This patch
fixes this specific transid mismatch error I was seeing with this
particular error path.
CC: [email protected] # 5.12+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3302,6 +3302,22 @@ int btrfs_sync_log(struct btrfs_trans_ha
* begins and releases it only after writing its superblock.
*/
mutex_lock(&fs_info->tree_log_mutex);
+
+ /*
+ * The previous transaction writeout phase could have failed, and thus
+ * marked the fs in an error state. We must not commit here, as we
+ * could have updated our generation in the super_for_commit and
+ * writing the super here would result in transid mismatches. If there
+ * is an error here just bail.
+ */
+ if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
+ ret = -EIO;
+ btrfs_set_log_full_commit(trans);
+ btrfs_abort_transaction(trans, ret);
+ mutex_unlock(&fs_info->tree_log_mutex);
+ goto out_wake_log_root;
+ }
+
btrfs_set_super_log_root(fs_info->super_for_commit, log_root_start);
btrfs_set_super_log_root_level(fs_info->super_for_commit, log_root_level);
ret = write_all_supers(fs_info, 1);
From: Alexander Kuznetsov <[email protected]>
commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream.
cgroup_mkdir() have restriction on newline usage in names:
$ mkdir $'/sys/fs/cgroup/cpu/test\ntest2'
mkdir: cannot create directory
'/sys/fs/cgroup/cpu/test\ntest2': Invalid argument
But in cgroup1_rename() such check is missed.
This allows us to make /proc/<pid>/cgroup unparsable:
$ mkdir /sys/fs/cgroup/cpu/test
$ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2'
$ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2'
$ cat /proc/self/cgroup
11:pids:/
10:freezer:/
9:hugetlb:/
8:cpuset:/
7:blkio:/user.slice
6:memory:/user.slice
5:net_cls,net_prio:/
4:perf_event:/
3:devices:/user.slice
2:cpu,cpuacct:/test
test2
1:name=systemd:/
0::/
Signed-off-by: Alexander Kuznetsov <[email protected]>
Reported-by: Andrey Krasichkov <[email protected]>
Acked-by: Dmitry Yakunin <[email protected]>
Cc: [email protected]
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/cgroup/cgroup-v1.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -820,6 +820,10 @@ static int cgroup1_rename(struct kernfs_
struct cgroup *cgrp = kn->priv;
int ret;
+ /* do not accept '\n' to prevent making /proc/<pid>/cgroup unparsable */
+ if (strchr(new_name_str, '\n'))
+ return -EINVAL;
+
if (kernfs_type(kn) != KERNFS_DIR)
return -ENOTDIR;
if (kn->parent != new_parent)
From: Takashi Iwai <[email protected]>
commit 83e197a8414c0ba545e7e3916ce05f836f349273 upstream.
The timer instance per queue is exclusive, and snd_seq_timer_open()
should have managed the concurrent accesses. It looks as if it's
checking the already existing timer instance at the beginning, but
it's not right, because there is no protection, hence any later
concurrent call of snd_seq_timer_open() may override the timer
instance easily. This may result in UAF, as the leftover timer
instance can keep running while the queue itself gets closed, as
spotted by syzkaller recently.
For avoiding the race, add a proper check at the assignment of
tmr->timeri again, and return -EBUSY if it's been already registered.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_timer.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -297,8 +297,16 @@ int snd_seq_timer_open(struct snd_seq_qu
return err;
}
spin_lock_irq(&tmr->lock);
- tmr->timeri = t;
+ if (tmr->timeri)
+ err = -EBUSY;
+ else
+ tmr->timeri = t;
spin_unlock_irq(&tmr->lock);
+ if (err < 0) {
+ snd_timer_close(t);
+ snd_timer_instance_free(t);
+ return err;
+ }
return 0;
}
From: Eric W. Biederman <[email protected]>
commit 06af8679449d4ed282df13191fc52d5ba28ec536 upstream.
Olivier Langlois has been struggling with coredumps being incompletely written in
processes using io_uring.
Olivier Langlois <[email protected]> writes:
> io_uring is a big user of task_work and any event that io_uring made a
> task waiting for that occurs during the core dump generation will
> generate a TIF_NOTIFY_SIGNAL.
>
> Here are the detailed steps of the problem:
> 1. io_uring calls vfs_poll() to install a task to a file wait queue
> with io_async_wake() as the wakeup function cb from io_arm_poll_handler()
> 2. wakeup function ends up calling task_work_add() with TWA_SIGNAL
> 3. task_work_add() sets the TIF_NOTIFY_SIGNAL bit by calling
> set_notify_signal()
The coredump code deliberately supports being interrupted by SIGKILL,
and depends upon prepare_signal to filter out all other signals. Now
that signal_pending includes wake ups for TIF_NOTIFY_SIGNAL this hack
in dump_emitted by the coredump code no longer works.
Make the coredump code more robust by explicitly testing for all of
the wakeup conditions the coredump code supports. This prevents
new wakeup conditions from breaking the coredump code, as well
as fixing the current issue.
The filesystem code that the coredump code uses already limits
itself to only aborting on fatal_signal_pending. So it should
not develop surprising wake-up reasons either.
v2: Don't remove the now unnecessary code in prepare_signal.
Cc: [email protected]
Fixes: 12db8b690010 ("entry: Add support for TIF_NOTIFY_SIGNAL")
Reported-by: Olivier Langlois <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/coredump.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -519,7 +519,7 @@ static bool dump_interrupted(void)
* but then we need to teach dump_write() to restart and clear
* TIF_SIGPENDING.
*/
- return signal_pending(current);
+ return fatal_signal_pending(current) || freezing(current);
}
static void wait_for_dump_helpers(struct file *file)
From: Liangyan <[email protected]>
commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream.
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,
Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009] anon_vma_clone+0x5d/0x170
[1640542.567417] __split_vma+0x91/0x1a0
[1640542.567777] do_munmap+0x2c6/0x320
[1640542.568128] vm_munmap+0x54/0x70
[1640542.569990] __x64_sys_munmap+0x22/0x30
[1640542.572005] do_syscall_64+0x5b/0x1b0
[1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27
James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[ 86.780806] no_context+0xdf/0x3c0
[ 86.784327] __do_page_fault+0x252/0x470
[ 86.788367] do_page_fault+0x32/0x140
[ 86.792145] page_fault+0x1e/0x30
[ 86.795576] strncpy_from_unsafe+0x66/0xb0
[ 86.799789] fetch_memory_string+0x25/0x40
[ 86.804002] fetch_deref_string+0x51/0x60
[ 86.808134] kprobe_trace_func+0x32d/0x3a0
[ 86.812347] kprobe_dispatcher+0x45/0x50
[ 86.816385] kprobe_ftrace_handler+0x90/0xf0
[ 86.820779] ftrace_ops_assist_func+0xa1/0x140
[ 86.825340] 0xffffffffc00750bf
[ 86.828603] do_sys_open+0x5/0x1f0
[ 86.832124] do_syscall_64+0x5b/0x1b0
[ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9
commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Xunlei Pang <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer")
Reviewed-by: Xunlei Pang <[email protected]>
Reviewed-by: yinbinbin <[email protected]>
Reviewed-by: Wetp Zhang <[email protected]>
Tested-by: James Wang <[email protected]>
Signed-off-by: Liangyan <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2735,7 +2735,7 @@ trace_event_buffer_lock_reserve(struct t
(entry = this_cpu_read(trace_buffered_event))) {
/* Try to use the per cpu buffer first */
val = this_cpu_inc_return(trace_buffered_event_cnt);
- if ((len < (PAGE_SIZE - sizeof(*entry))) && val == 1) {
+ if ((len < (PAGE_SIZE - sizeof(*entry) - sizeof(entry->array[0]))) && val == 1) {
trace_event_setup(entry, type, trace_ctx);
entry->array[0] = len;
return entry;
From: Wolfram Sang <[email protected]>
commit 2c9017d0b5d3fbf17e69577a42d9e610ca122810 upstream.
We have to bring the eMMC from sending-data state back to transfer state
once we detected a CRC error (timeout) during tuning. So, send a stop
command via mmc_abort_tuning().
Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support")
Reported-by Yoshihiro Shimoda <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Tested-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/renesas_sdhi_core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -679,14 +679,19 @@ static int renesas_sdhi_execute_tuning(s
/* Issue CMD19 twice for each tap */
for (i = 0; i < 2 * priv->tap_num; i++) {
+ int cmd_error;
+
/* Set sampling clock position */
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);
- if (mmc_send_tuning(mmc, opcode, NULL) == 0)
+ if (mmc_send_tuning(mmc, opcode, &cmd_error) == 0)
set_bit(i, priv->taps);
if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) == 0)
set_bit(i, priv->smpcmp);
+
+ if (cmd_error)
+ mmc_abort_tuning(mmc, opcode);
}
ret = renesas_sdhi_select_tuning(host);
From: Matt Wang <[email protected]>
[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ]
Some commands (such as INQUIRY) may return less data than the initiator
requested. To avoid conducting useless information, set the right residual
count to make upper layer aware of this.
Before (INQUIRY PAGE 0xB0 with 128B buffer):
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good
Received 128 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
After:
$ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00
SCSI Status: Good
Received 64 bytes of data:
00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............
10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@....
20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... .....
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[mkp: clarified description]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matt Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/vmw_pvscsi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 8a79605d9652..b9969fce6b4d 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -585,7 +585,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
case BTSTAT_SUCCESS:
case BTSTAT_LINKED_COMMAND_COMPLETED:
case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG:
- /* If everything went fine, let's move on.. */
+ /*
+ * Commands like INQUIRY may transfer less data than
+ * requested by the initiator via bufflen. Set residual
+ * count to make upper layer aware of the actual amount
+ * of data returned.
+ */
+ scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
cmd->result = (DID_OK << 16);
break;
--
2.30.2
From: Desmond Cheong Zhi Xi <[email protected]>
commit c336a5ee984708db4826ef9e47d184e638e29717 upstream.
This patch eliminates the following smatch warning:
drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex'
The 'file_priv->master' field should be protected by the mutex lock to
'&dev->master_mutex'. This is because other processes can concurrently
modify this field and free the current 'file_priv->master'
pointer. This could result in a use-after-free error when 'master' is
dereferenced in subsequent function calls to
'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'.
An example of a scenario that would produce this error can be seen
from a similar bug in 'drm_getunique()' that was reported by Syzbot:
https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803
In the Syzbot report, another process concurrently acquired the
device's master mutex in 'drm_setmaster_ioctl()', then overwrote
'fpriv->master' in 'drm_new_set_master()'. The old value of
'fpriv->master' was subsequently freed before the mutex was unlocked.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Desmond Cheong Zhi Xi <[email protected]>
Cc: [email protected]
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_auth.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_auth.c
+++ b/drivers/gpu/drm/drm_auth.c
@@ -314,9 +314,10 @@ int drm_master_open(struct drm_file *fil
void drm_master_release(struct drm_file *file_priv)
{
struct drm_device *dev = file_priv->minor->dev;
- struct drm_master *master = file_priv->master;
+ struct drm_master *master;
mutex_lock(&dev->master_mutex);
+ master = file_priv->master;
if (file_priv->magic)
idr_remove(&file_priv->master->magic_map, file_priv->magic);
From: Lai Jiangshan <[email protected]>
commit b53e84eed08b88fd3ff59e5c2a7f1a69d4004e32 upstream.
When using shadow paging, unload the guest MMU when emulating a guest TLB
flush to ensure all roots are synchronized. From the guest's perspective,
flushing the TLB ensures any and all modifications to its PTEs will be
recognized by the CPU.
Note, unloading the MMU is overkill, but is done to mirror KVM's existing
handling of INVPCID(all) and ensure the bug is squashed. Future cleanup
can be done to more precisely synchronize roots when servicing a guest
TLB flush.
If TDP is enabled, synchronizing the MMU is unnecessary even if nested
TDP is in play, as a "legacy" TLB flush from L1 does not invalidate L1's
TDP mappings. For EPT, an explicit INVEPT is required to invalidate
guest-physical mappings; for NPT, guest mappings are always tagged with
an ASID and thus can only be invalidated via the VMCB's ASID control.
This bug has existed since the introduction of KVM_VCPU_FLUSH_TLB.
It was only recently exposed after Linux guests stopped flushing the
local CPU's TLB prior to flushing remote TLBs (see commit 4ce94eabac16,
"x86/mm/tlb: Flush remote and local TLBs concurrently"), but is also
visible in Windows 10 guests.
Tested-by: Maxim Levitsky <[email protected]>
Reviewed-by: Maxim Levitsky <[email protected]>
Fixes: f38a7b75267f ("KVM: X86: support paravirtualized help for TLB shootdowns")
Signed-off-by: Lai Jiangshan <[email protected]>
[sean: massaged comment and changelog]
Message-Id: <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2982,6 +2982,19 @@ static void kvm_vcpu_flush_tlb_all(struc
static void kvm_vcpu_flush_tlb_guest(struct kvm_vcpu *vcpu)
{
++vcpu->stat.tlb_flush;
+
+ if (!tdp_enabled) {
+ /*
+ * A TLB flush on behalf of the guest is equivalent to
+ * INVPCID(all), toggling CR4.PGE, etc., which requires
+ * a forced sync of the shadow page tables. Unload the
+ * entire MMU here and the subsequent load will sync the
+ * shadow page tables, and also flush the TLB.
+ */
+ kvm_mmu_unload(vcpu);
+ return;
+ }
+
static_call(kvm_x86_tlb_flush_guest)(vcpu);
}
From: Maciej Żenczykowski <[email protected]>
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <[email protected]>
Cc: Bryan O'Donoghue <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: Yauheni Kaliuta <[email protected]>
Cc: Linux USB Mailing List <[email protected]>
Acked-By: Lorenzo Colitti <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_ncm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -583,7 +583,7 @@ static void ncm_do_notify(struct f_ncm *
data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
data[1] = data[0];
- DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+ DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget));
ncm->notify_state = NCM_NOTIFY_CONNECT;
break;
}
From: Masami Hiramatsu <[email protected]>
commit 824afd55e95c3cb12c55d297a0ae408be1779cc8 upstream.
Since the "fallthrough" is defined only in the kernel, building
lib/bootconfig.c as a part of user-space tools causes a build
error.
Add a dummy fallthrough to avoid the build error.
Link: https://lkml.kernel.org/r/162087519356.442660.11385099982318160180.stgit@devnote2
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Fixes: 4c1ca831adb1 ("Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"")
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bootconfig/include/linux/bootconfig.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/bootconfig/include/linux/bootconfig.h b/tools/bootconfig/include/linux/bootconfig.h
index 078cbd2ba651..de7f30f99af3 100644
--- a/tools/bootconfig/include/linux/bootconfig.h
+++ b/tools/bootconfig/include/linux/bootconfig.h
@@ -4,4 +4,8 @@
#include "../../../../include/linux/bootconfig.h"
+#ifndef fallthrough
+# define fallthrough
+#endif
+
#endif
--
2.32.0
From: Kyle Tso <[email protected]>
commit 6490fa565534fa83593278267785a694fd378a2b upstream.
Current timer PD_T_SINK_WAIT_CAP is set to 240ms which will violate the
SinkWaitCapTimer (tTypeCSinkWaitCap 310 - 620 ms) defined in the PD
Spec if the port is faster enough when running the state machine. Set it
to the lower bound 310ms to ensure the timeout is in Spec.
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/usb/pd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -460,7 +460,7 @@ static inline unsigned int rdo_max_power
#define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */
#define PD_T_SOURCE_ACTIVITY 45
#define PD_T_SINK_ACTIVITY 135
-#define PD_T_SINK_WAIT_CAP 240
+#define PD_T_SINK_WAIT_CAP 310 /* 310 - 620 ms */
#define PD_T_PS_TRANSITION 500
#define PD_T_SRC_TRANSITION 35
#define PD_T_DRP_SNK 40
From: Christophe JAILLET <[email protected]>
commit 1d0d3d818eafe1963ec1eaf302175cd14938188e upstream.
If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.
Fix the error handling path of the probe accordingly.
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -775,13 +775,13 @@ static int dwc3_meson_g12a_probe(struct
ret = priv->drvdata->usb_init(priv);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;
}
/* Set PHY Power */
@@ -819,6 +819,10 @@ err_phys_exit:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);
+err_disable_regulator:
+ if (priv->vbus)
+ regulator_disable(priv->vbus);
+
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
From: Marian-Cristian Rotariu <[email protected]>
commit d00889080ab60051627dab1d85831cd9db750e2a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/ep0.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -292,6 +292,9 @@ static struct dwc3_ep *dwc3_wIndex_to_de
epnum |= 1;
dep = dwc->eps[epnum];
+ if (dep == NULL)
+ return NULL;
+
if (dep->flags & DWC3_EP_ENABLED)
return dep;
From: Lai Jiangshan <[email protected]>
commit b1bd5cba3306691c771d558e94baa73e8b0b96b7 upstream.
When computing the access permissions of a shadow page, use the effective
permissions of the walk up to that point, i.e. the logic AND of its parents'
permissions. Two guest PxE entries that point at the same table gfn need to
be shadowed with different shadow pages if their parents' permissions are
different. KVM currently uses the effective permissions of the last
non-leaf entry for all non-leaf entries. Because all non-leaf SPTEs have
full ("uwx") permissions, and the effective permissions are recorded only
in role.access and merged into the leaves, this can lead to incorrect
reuse of a shadow page and eventually to a missing guest protection page
fault.
For example, here is a shared pagetable:
pgd[] pud[] pmd[] virtual address pointers
/->pmd1(u--)->pte1(uw-)->page1 <- ptr1 (u--)
/->pud1(uw-)--->pmd2(uw-)->pte2(uw-)->page2 <- ptr2 (uw-)
pgd-| (shared pmd[] as above)
\->pud2(u--)--->pmd1(u--)->pte1(uw-)->page1 <- ptr3 (u--)
\->pmd2(uw-)->pte2(uw-)->page2 <- ptr4 (u--)
pud1 and pud2 point to the same pmd table, so:
- ptr1 and ptr3 points to the same page.
- ptr2 and ptr4 points to the same page.
(pud1 and pud2 here are pud entries, while pmd1 and pmd2 here are pmd entries)
- First, the guest reads from ptr1 first and KVM prepares a shadow
page table with role.access=u--, from ptr1's pud1 and ptr1's pmd1.
"u--" comes from the effective permissions of pgd, pud1 and
pmd1, which are stored in pt->access. "u--" is used also to get
the pagetable for pud1, instead of "uw-".
- Then the guest writes to ptr2 and KVM reuses pud1 which is present.
The hypervisor set up a shadow page for ptr2 with pt->access is "uw-"
even though the pud1 pmd (because of the incorrect argument to
kvm_mmu_get_page in the previous step) has role.access="u--".
- Then the guest reads from ptr3. The hypervisor reuses pud1's
shadow pmd for pud2, because both use "u--" for their permissions.
Thus, the shadow pmd already includes entries for both pmd1 and pmd2.
- At last, the guest writes to ptr4. This causes no vmexit or pagefault,
because pud1's shadow page structures included an "uw-" page even though
its role.access was "u--".
Any kind of shared pagetable might have the similar problem when in
virtual machine without TDP enabled if the permissions are different
from different ancestors.
In order to fix the problem, we change pt->access to be an array, and
any access in it will not include permissions ANDed from child ptes.
The test code is: https://lore.kernel.org/kvm/[email protected]/
Remember to test it with TDP disabled.
The problem had existed long before the commit 41074d07c78b ("KVM: MMU:
Fix inherited permissions for emulated guest pte updates"), and it
is hard to find which is the culprit. So there is no fixes tag here.
Signed-off-by: Lai Jiangshan <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Fixes: cea0f0e7ea54 ("[PATCH] KVM: MMU: Shadow page table caching")
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/virt/kvm/mmu.rst | 4 ++--
arch/x86/kvm/mmu/paging_tmpl.h | 14 +++++++++-----
2 files changed, 11 insertions(+), 7 deletions(-)
--- a/Documentation/virt/kvm/mmu.rst
+++ b/Documentation/virt/kvm/mmu.rst
@@ -171,8 +171,8 @@ Shadow pages contain the following infor
shadow pages) so role.quadrant takes values in the range 0..3. Each
quadrant maps 1GB virtual address space.
role.access:
- Inherited guest access permissions in the form uwx. Note execute
- permission is positive, not negative.
+ Inherited guest access permissions from the parent ptes in the form uwx.
+ Note execute permission is positive, not negative.
role.invalid:
The page is invalid and should not be used. It is a root page that is
currently pinned (by a cpu hardware register pointing to it); once it is
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -90,8 +90,8 @@ struct guest_walker {
gpa_t pte_gpa[PT_MAX_FULL_LEVELS];
pt_element_t __user *ptep_user[PT_MAX_FULL_LEVELS];
bool pte_writable[PT_MAX_FULL_LEVELS];
- unsigned pt_access;
- unsigned pte_access;
+ unsigned int pt_access[PT_MAX_FULL_LEVELS];
+ unsigned int pte_access;
gfn_t gfn;
struct x86_exception fault;
};
@@ -418,13 +418,15 @@ retry_walk:
}
walker->ptes[walker->level - 1] = pte;
+
+ /* Convert to ACC_*_MASK flags for struct guest_walker. */
+ walker->pt_access[walker->level - 1] = FNAME(gpte_access)(pt_access ^ walk_nx_mask);
} while (!is_last_gpte(mmu, walker->level, pte));
pte_pkey = FNAME(gpte_pkeys)(vcpu, pte);
accessed_dirty = have_ad ? pte_access & PT_GUEST_ACCESSED_MASK : 0;
/* Convert to ACC_*_MASK flags for struct guest_walker. */
- walker->pt_access = FNAME(gpte_access)(pt_access ^ walk_nx_mask);
walker->pte_access = FNAME(gpte_access)(pte_access ^ walk_nx_mask);
errcode = permission_fault(vcpu, mmu, walker->pte_access, pte_pkey, access);
if (unlikely(errcode))
@@ -463,7 +465,8 @@ retry_walk:
}
pgprintk("%s: pte %llx pte_access %x pt_access %x\n",
- __func__, (u64)pte, walker->pte_access, walker->pt_access);
+ __func__, (u64)pte, walker->pte_access,
+ walker->pt_access[walker->level - 1]);
return 1;
error:
@@ -642,7 +645,7 @@ static int FNAME(fetch)(struct kvm_vcpu
bool huge_page_disallowed = exec && nx_huge_page_workaround_enabled;
struct kvm_mmu_page *sp = NULL;
struct kvm_shadow_walk_iterator it;
- unsigned direct_access, access = gw->pt_access;
+ unsigned int direct_access, access;
int top_level, level, req_level, ret;
gfn_t base_gfn = gw->gfn;
@@ -674,6 +677,7 @@ static int FNAME(fetch)(struct kvm_vcpu
sp = NULL;
if (!is_shadow_present_pte(*it.sptep)) {
table_gfn = gw->table_gfn[it.level - 2];
+ access = gw->pt_access[it.level - 2];
sp = kvm_mmu_get_page(vcpu, table_gfn, addr, it.level-1,
false, access);
}
From: George McCollister <[email protected]>
[ Upstream commit 8c42a49738f16af0061f9ae5c2f5a955f268d9e3 ]
Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz9477.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 55e5d479acce..854e25f43fa7 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1530,6 +1530,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = {
.num_statics = 16,
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
+ .phy_errata_9477 = true,
},
};
--
2.30.2
From: Zong Li <[email protected]>
[ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ]
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cadence/macb_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 0f6a6cb7e98d..51b19172d63b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -2837,6 +2837,9 @@ static struct net_device_stats *gem_get_stats(struct macb *bp)
struct gem_stats *hwstat = &bp->hw_stats.gem;
struct net_device_stats *nstat = &bp->dev->stats;
+ if (!netif_running(bp->dev))
+ return nstat;
+
gem_update_stats(bp);
nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 7907a021e4bbfa29cccacd2ba2dade894d9a7d4c ]
irqs allocated with devm_request_irq() should not be freed using
free_irq(). Doing so causes a dangling pointer and a subsequent double
free.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Hulk Robot <[email protected]>
Acked-by: John Garry <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 4580e081e489..b21246b1ba99 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -4799,14 +4799,14 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)
{
int i;
- free_irq(pci_irq_vector(pdev, 1), hisi_hba);
- free_irq(pci_irq_vector(pdev, 2), hisi_hba);
- free_irq(pci_irq_vector(pdev, 11), hisi_hba);
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 1), hisi_hba);
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 2), hisi_hba);
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 11), hisi_hba);
for (i = 0; i < hisi_hba->cq_nvecs; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
int nr = hisi_sas_intr_conv ? 16 : 16 + i;
- free_irq(pci_irq_vector(pdev, nr), cq);
+ devm_free_irq(&pdev->dev, pci_irq_vector(pdev, nr), cq);
}
pci_free_irq_vectors(pdev);
}
--
2.30.2
From: Coly Li <[email protected]>
commit 41fe8d088e96472f63164e213de44ec77be69478 upstream.
In the cache missing code path of cached device, if a proper location
from the internal B+ tree is matched for a cache miss range, function
cached_dev_cache_miss() will be called in cache_lookup_fn() in the
following code block,
[code block 1]
526 unsigned int sectors = KEY_INODE(k) == s->iop.inode
527 ? min_t(uint64_t, INT_MAX,
528 KEY_START(k) - bio->bi_iter.bi_sector)
529 : INT_MAX;
530 int ret = s->d->cache_miss(b, s, bio, sectors);
Here s->d->cache_miss() is the call backfunction pointer initialized as
cached_dev_cache_miss(), the last parameter 'sectors' is an important
hint to calculate the size of read request to backing device of the
missing cache data.
Current calculation in above code block may generate oversized value of
'sectors', which consequently may trigger 2 different potential kernel
panics by BUG() or BUG_ON() as listed below,
1) BUG_ON() inside bch_btree_insert_key(),
[code block 2]
886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k));
2) BUG() inside biovec_slab(),
[code block 3]
51 default:
52 BUG();
53 return NULL;
All the above panics are original from cached_dev_cache_miss() by the
oversized parameter 'sectors'.
Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate
the size of data read from backing device for the cache missing. This
size is stored in s->insert_bio_sectors by the following lines of code,
[code block 4]
909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada);
Then the actual key inserting to the internal B+ tree is generated and
stored in s->iop.replace_key by the following lines of code,
[code block 5]
911 s->iop.replace_key = KEY(s->iop.inode,
912 bio->bi_iter.bi_sector + s->insert_bio_sectors,
913 s->insert_bio_sectors);
The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from
the above code block.
And the bio sending to backing device for the missing data is allocated
with hint from s->insert_bio_sectors by the following lines of code,
[code block 6]
926 cache_bio = bio_alloc_bioset(GFP_NOWAIT,
927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS),
928 &dc->disk.bio_split);
The oversized parameter 'sectors' may trigger panic 2) by BUG() from the
agove code block.
Now let me explain how the panics happen with the oversized 'sectors'.
In code block 5, replace_key is generated by macro KEY(). From the
definition of macro KEY(),
[code block 7]
71 #define KEY(inode, offset, size) \
72 ((struct bkey) { \
73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \
74 .low = (offset) \
75 })
Here 'size' is 16bits width embedded in 64bits member 'high' of struct
bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is
very probably to be larger than (1<<16) - 1, which makes the bkey size
calculation in code block 5 is overflowed. In one bug report the value
of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors'
results the overflowed s->insert_bio_sectors in code block 4, then makes
size field of s->iop.replace_key to be 0 in code block 5. Then the 0-
sized s->iop.replace_key is inserted into the internal B+ tree as cache
missing check key (a special key to detect and avoid a racing between
normal write request and cache missing read request) as,
[code block 8]
915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key);
Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey
size check BUG_ON() in code block 2, and causes the kernel panic 1).
Another kernel panic is from code block 6, is by the bvecs number
oversized value s->insert_bio_sectors from code block 4,
min(sectors, bio_sectors(bio) + reada)
There are two possibility for oversized reresult,
- bio_sectors(bio) is valid, but bio_sectors(bio) + reada is oversized.
- sectors < bio_sectors(bio) + reada, but sectors is oversized.
>From a bug report the result of "DIV_ROUND_UP(s->insert_bio_sectors,
PAGE_SECTORS)" from code block 6 can be 344, 282, 946, 342 and many
other values which larther than BIO_MAX_VECS (a.k.a 256). When calling
bio_alloc_bioset() with such larger-than-256 value as the 2nd parameter,
this value will eventually be sent to biovec_slab() as parameter
'nr_vecs' in following code path,
bio_alloc_bioset() ==> bvec_alloc() ==> biovec_slab()
Because parameter 'nr_vecs' is larger-than-256 value, the panic by BUG()
in code block 3 is triggered inside biovec_slab().
>From the above analysis, we know that the 4th parameter 'sector' sent
into cached_dev_cache_miss() may cause overflow in code block 5 and 6,
and finally cause kernel panic in code block 2 and 3. And if result of
bio_sectors(bio) + reada exceeds valid bvecs number, it may also trigger
kernel panic in code block 3 from code block 6.
Now the almost-useless readahead size for cache missing request back to
backing device is removed, this patch can fix the oversized issue with
more simpler method.
- add a local variable size_limit, set it by the minimum value from
the max bkey size and max bio bvecs number.
- set s->insert_bio_sectors by the minimum value from size_limit,
sectors, and the sectors size of bio.
- replace sectors by s->insert_bio_sectors to do bio_next_split.
By the above method with size_limit, s->insert_bio_sectors will never
result oversized replace_key size or bio bvecs number. And split bio
'miss' from bio_next_split() will always match the size of 'cache_bio',
that is the current maximum bio size we can sent to backing device for
fetching the cache missing data.
Current problmatic code can be partially found since Linux v3.13-rc1,
therefore all maintained stable kernels should try to apply this fix.
Reported-by: Alexander Ullrich <[email protected]>
Reported-by: Diego Ercolani <[email protected]>
Reported-by: Jan Szubiak <[email protected]>
Reported-by: Marco Rebhan <[email protected]>
Reported-by: Matthias Ferdinand <[email protected]>
Reported-by: Victor Westerhuis <[email protected]>
Reported-by: Vojtech Pavlik <[email protected]>
Reported-and-tested-by: Rolf Fokkens <[email protected]>
Reported-and-tested-by: Thorsten Knabe <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Cc: [email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Nix <[email protected]>
Cc: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/request.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -882,6 +882,7 @@ static int cached_dev_cache_miss(struct
int ret = MAP_CONTINUE;
struct cached_dev *dc = container_of(s->d, struct cached_dev, disk);
struct bio *miss, *cache_bio;
+ unsigned int size_limit;
s->cache_missed = 1;
@@ -891,7 +892,10 @@ static int cached_dev_cache_miss(struct
goto out_submit;
}
- s->insert_bio_sectors = min(sectors, bio_sectors(bio));
+ /* Limitation for valid replace key size and cache_bio bvecs number */
+ size_limit = min_t(unsigned int, BIO_MAX_VECS * PAGE_SECTORS,
+ (1 << KEY_SIZE_BITS) - 1);
+ s->insert_bio_sectors = min3(size_limit, sectors, bio_sectors(bio));
s->iop.replace_key = KEY(s->iop.inode,
bio->bi_iter.bi_sector + s->insert_bio_sectors,
@@ -903,7 +907,8 @@ static int cached_dev_cache_miss(struct
s->iop.replace = true;
- miss = bio_next_split(bio, sectors, GFP_NOIO, &s->d->bio_split);
+ miss = bio_next_split(bio, s->insert_bio_sectors, GFP_NOIO,
+ &s->d->bio_split);
/* btree_search_recurse()'s btree iterator is no good anymore */
ret = miss == bio ? MAP_DONE : -EINTR;
From: Thomas Petazzoni <[email protected]>
commit b65ba0c362be665192381cc59e3ac3ef6f0dd1e1 upstream.
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms
Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: [email protected]
Tested-by: Alexandre Belloni <[email protected]>
Tested-by: Drew Fustini <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Thomas Petazzoni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/musb_core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2009,9 +2009,8 @@ static void musb_pm_runtime_check_sessio
schedule_delayed_work(&musb->irq_work,
msecs_to_jiffies(1000));
musb->quirk_retries--;
- break;
}
- fallthrough;
+ break;
case MUSB_QUIRK_B_INVALID_VBUS_91:
if (musb->quirk_retries && !musb->flush_irq_work) {
musb_dbg(musb,
From: Kan Liang <[email protected]>
commit 848ff3768684701a4ce73a2ec0e5d438d4e2b0da upstream.
Perf tool errors out with the latest event list for the Ice Lake server.
event syntax error: 'unc_m2m_imc_reads.to_pmm'
\___ value too big for format, maximum is 255
The same as the Snow Ridge server, the M2M uncore unit in the Ice Lake
server has the unit mask extension field as well.
Fixes: 2b3b76b5ec67 ("perf/x86/intel/uncore: Add Ice Lake server uncore support")
Reported-by: Jin Yao <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -5103,9 +5103,10 @@ static struct intel_uncore_type icx_unco
.perf_ctr = SNR_M2M_PCI_PMON_CTR0,
.event_ctl = SNR_M2M_PCI_PMON_CTL0,
.event_mask = SNBEP_PMON_RAW_EVENT_MASK,
+ .event_mask_ext = SNR_M2M_PCI_PMON_UMASK_EXT,
.box_ctl = SNR_M2M_PCI_PMON_BOX_CTL,
.ops = &snr_m2m_uncore_pci_ops,
- .format_group = &skx_uncore_format_group,
+ .format_group = &snr_m2m_uncore_format_group,
};
static struct attribute *icx_upi_uncore_formats_attr[] = {
From: Mayank Rana <[email protected]>
commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.
If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful. Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.
Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: [email protected]
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Mayank Rana <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/ucsi/ucsi.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1253,6 +1253,7 @@ err_unregister:
}
err_reset:
+ memset(&ucsi->cap, 0, sizeof(ucsi->cap));
ucsi_reset_ppm(ucsi);
err:
return ret;
From: Nikolay Borisov <[email protected]>
commit aefd7f7065567a4666f42c0fc8cdb379d2e036bf upstream.
Syzbot managed to trigger this assert while performing its fuzzing.
Turns out it's better to have those asserts turned into full-fledged
checks so that in case buggy btrfs images are mounted the users gets
an error and mounting is stopped. Alternatively with CONFIG_BTRFS_ASSERT
disabled such image would have been erroneously allowed to be mounted.
Reported-by: [email protected]
CC: [email protected] # 5.4+
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ add uuids to the messages ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2558,6 +2558,24 @@ static int validate_super(struct btrfs_f
ret = -EINVAL;
}
+ if (memcmp(fs_info->fs_devices->fsid, fs_info->super_copy->fsid,
+ BTRFS_FSID_SIZE)) {
+ btrfs_err(fs_info,
+ "superblock fsid doesn't match fsid of fs_devices: %pU != %pU",
+ fs_info->super_copy->fsid, fs_info->fs_devices->fsid);
+ ret = -EINVAL;
+ }
+
+ if (btrfs_fs_incompat(fs_info, METADATA_UUID) &&
+ memcmp(fs_info->fs_devices->metadata_uuid,
+ fs_info->super_copy->metadata_uuid, BTRFS_FSID_SIZE)) {
+ btrfs_err(fs_info,
+"superblock metadata_uuid doesn't match metadata uuid of fs_devices: %pU != %pU",
+ fs_info->super_copy->metadata_uuid,
+ fs_info->fs_devices->metadata_uuid);
+ ret = -EINVAL;
+ }
+
if (memcmp(fs_info->fs_devices->metadata_uuid, sb->dev_item.fsid,
BTRFS_FSID_SIZE) != 0) {
btrfs_err(fs_info,
@@ -3185,14 +3203,6 @@ int __cold open_ctree(struct super_block
disk_super = fs_info->super_copy;
- ASSERT(!memcmp(fs_info->fs_devices->fsid, fs_info->super_copy->fsid,
- BTRFS_FSID_SIZE));
-
- if (btrfs_fs_incompat(fs_info, METADATA_UUID)) {
- ASSERT(!memcmp(fs_info->fs_devices->metadata_uuid,
- fs_info->super_copy->metadata_uuid,
- BTRFS_FSID_SIZE));
- }
features = btrfs_super_flags(disk_super);
if (features & BTRFS_SUPER_FLAG_CHANGING_FSID_V2) {
From: Ricky Wu <[email protected]>
commit 3df4fce739e2b263120f528c5e0fe6b2f8937b5b upstream.
aspm (Active State Power Management)
rtsx_comm_set_aspm: this function is for driver to make sure
not enter power saving when processing of init and card_detcct
ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250
Change back to use original way to control aspm
ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228
Keep the new way to control aspm
Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function")
Reported-by: Chris Chiu <[email protected]>
Tested-by: Gordon Lack <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Ricky Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/cardreader/rtl8411.c | 1
drivers/misc/cardreader/rts5209.c | 1
drivers/misc/cardreader/rts5227.c | 2 +
drivers/misc/cardreader/rts5228.c | 1
drivers/misc/cardreader/rts5229.c | 1
drivers/misc/cardreader/rts5249.c | 3 ++
drivers/misc/cardreader/rts5260.c | 1
drivers/misc/cardreader/rts5261.c | 1
drivers/misc/cardreader/rtsx_pcr.c | 44 ++++++++++++++++++++++++++-----------
include/linux/rtsx_pci.h | 2 +
10 files changed, 44 insertions(+), 13 deletions(-)
--- a/drivers/misc/cardreader/rtl8411.c
+++ b/drivers/misc/cardreader/rtl8411.c
@@ -468,6 +468,7 @@ static void rtl8411_init_common_params(s
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_CFG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
pcr->ic_version = rtl8411_get_ic_version(pcr);
--- a/drivers/misc/cardreader/rts5209.c
+++ b/drivers/misc/cardreader/rts5209.c
@@ -255,6 +255,7 @@ void rts5209_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_CFG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 16);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
--- a/drivers/misc/cardreader/rts5227.c
+++ b/drivers/misc/cardreader/rts5227.c
@@ -358,6 +358,7 @@ void rts5227_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_CFG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
@@ -483,6 +484,7 @@ void rts522a_init_params(struct rtsx_pcr
rts5227_init_params(pcr);
pcr->ops = &rts522a_pcr_ops;
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(20, 20, 11);
pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
--- a/drivers/misc/cardreader/rts5228.c
+++ b/drivers/misc/cardreader/rts5228.c
@@ -718,6 +718,7 @@ void rts5228_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(28, 27, 11);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
--- a/drivers/misc/cardreader/rts5229.c
+++ b/drivers/misc/cardreader/rts5229.c
@@ -246,6 +246,7 @@ void rts5229_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_CFG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 6, 6);
--- a/drivers/misc/cardreader/rts5249.c
+++ b/drivers/misc/cardreader/rts5249.c
@@ -566,6 +566,7 @@ void rts5249_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_CFG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(1, 29, 16);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
@@ -729,6 +730,7 @@ static const struct pcr_ops rts524a_pcr_
void rts524a_init_params(struct rtsx_pcr *pcr)
{
rts5249_init_params(pcr);
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 29, 11);
pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEF;
pcr->option.ltr_l1off_snooze_sspwrgate =
@@ -845,6 +847,7 @@ static const struct pcr_ops rts525a_pcr_
void rts525a_init_params(struct rtsx_pcr *pcr)
{
rts5249_init_params(pcr);
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(25, 29, 11);
pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEF;
pcr->option.ltr_l1off_snooze_sspwrgate =
--- a/drivers/misc/cardreader/rts5260.c
+++ b/drivers/misc/cardreader/rts5260.c
@@ -628,6 +628,7 @@ void rts5260_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 29, 11);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
--- a/drivers/misc/cardreader/rts5261.c
+++ b/drivers/misc/cardreader/rts5261.c
@@ -783,6 +783,7 @@ void rts5261_init_params(struct rtsx_pcr
pcr->sd30_drive_sel_1v8 = 0x00;
pcr->sd30_drive_sel_3v3 = 0x00;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->aspm_mode = ASPM_MODE_REG;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 11);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -85,12 +85,18 @@ static void rtsx_comm_set_aspm(struct rt
if (pcr->aspm_enabled == enable)
return;
- if (pcr->aspm_en & 0x02)
- rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
- FORCE_ASPM_CTL1, enable ? 0 : FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
- else
- rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
- FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
+ if (pcr->aspm_mode == ASPM_MODE_CFG) {
+ pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPMC,
+ enable ? pcr->aspm_en : 0);
+ } else if (pcr->aspm_mode == ASPM_MODE_REG) {
+ if (pcr->aspm_en & 0x02)
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
+ FORCE_ASPM_CTL1, enable ? 0 : FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
+ else
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
+ FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
+ }
if (!enable && (pcr->aspm_en & 0x02))
mdelay(10);
@@ -1394,7 +1400,8 @@ static int rtsx_pci_init_hw(struct rtsx_
return err;
}
- rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30);
+ if (pcr->aspm_mode == ASPM_MODE_REG)
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30);
/* No CD interrupt if probing driver with card inserted.
* So we need to initialize pcr->card_exist here.
@@ -1410,6 +1417,8 @@ static int rtsx_pci_init_hw(struct rtsx_
static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
{
int err;
+ u16 cfg_val;
+ u8 val;
spin_lock_init(&pcr->lock);
mutex_init(&pcr->pcr_mutex);
@@ -1477,6 +1486,21 @@ static int rtsx_pci_init_chip(struct rts
if (!pcr->slots)
return -ENOMEM;
+ if (pcr->aspm_mode == ASPM_MODE_CFG) {
+ pcie_capability_read_word(pcr->pci, PCI_EXP_LNKCTL, &cfg_val);
+ if (cfg_val & PCI_EXP_LNKCTL_ASPM_L1)
+ pcr->aspm_enabled = true;
+ else
+ pcr->aspm_enabled = false;
+
+ } else if (pcr->aspm_mode == ASPM_MODE_REG) {
+ rtsx_pci_read_register(pcr, ASPM_FORCE_CTL, &val);
+ if (val & FORCE_ASPM_CTL0 && val & FORCE_ASPM_CTL1)
+ pcr->aspm_enabled = false;
+ else
+ pcr->aspm_enabled = true;
+ }
+
if (pcr->ops->fetch_vendor_settings)
pcr->ops->fetch_vendor_settings(pcr);
@@ -1506,7 +1530,6 @@ static int rtsx_pci_probe(struct pci_dev
struct pcr_handle *handle;
u32 base, len;
int ret, i, bar = 0;
- u8 val;
dev_dbg(&(pcidev->dev),
": Realtek PCI-E Card Reader found at %s [%04x:%04x] (rev %x)\n",
@@ -1572,11 +1595,6 @@ static int rtsx_pci_probe(struct pci_dev
pcr->host_cmds_addr = pcr->rtsx_resv_buf_addr;
pcr->host_sg_tbl_ptr = pcr->rtsx_resv_buf + HOST_CMDS_BUF_LEN;
pcr->host_sg_tbl_addr = pcr->rtsx_resv_buf_addr + HOST_CMDS_BUF_LEN;
- rtsx_pci_read_register(pcr, ASPM_FORCE_CTL, &val);
- if (val & FORCE_ASPM_CTL0 && val & FORCE_ASPM_CTL1)
- pcr->aspm_enabled = false;
- else
- pcr->aspm_enabled = true;
pcr->card_inserted = 0;
pcr->card_removed = 0;
INIT_DELAYED_WORK(&pcr->carddet_work, rtsx_pci_card_detect);
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -1109,6 +1109,7 @@ struct pcr_ops {
};
enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
+enum ASPM_MODE {ASPM_MODE_CFG, ASPM_MODE_REG};
#define ASPM_L1_1_EN BIT(0)
#define ASPM_L1_2_EN BIT(1)
@@ -1234,6 +1235,7 @@ struct rtsx_pcr {
u8 card_drive_sel;
#define ASPM_L1_EN 0x02
u8 aspm_en;
+ enum ASPM_MODE aspm_mode;
bool aspm_enabled;
#define PCR_MS_PMOS (1 << 0)
From: Neil Armstrong <[email protected]>
commit 4d2aa178d2ad2fb156711113790dde13e9aa2376 upstream.
When only PHY1 is used (for example on Odroid-HC4), the regmap init code
uses the usb2 ports when doesn't initialize the PHY1 regmap entry.
This fixes:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168
...
Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -651,7 +651,7 @@ static int dwc3_meson_g12a_setup_regmaps
return PTR_ERR(priv->usb_glue_regmap);
/* Create a regmap for each USB2 PHY control register set */
- for (i = 0; i < priv->usb2_ports; i++) {
+ for (i = 0; i < priv->drvdata->num_phys; i++) {
struct regmap_config u2p_regmap_config = {
.reg_bits = 8,
.val_bits = 32,
@@ -659,6 +659,9 @@ static int dwc3_meson_g12a_setup_regmaps
.max_register = U2P_R1,
};
+ if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+ continue;
+
u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
"u2p-%d", i);
if (!u2p_regmap_config.name)
From: Yang Yingliang <[email protected]>
commit fbf649cd6d64d40c03c5397ecd6b1ae922ba7afc upstream.
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes: 517c4c44b323 ("usb: Add driver to allow any GPIO to be used for 7211 USB signals")
Cc: stable <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/brcmstb-usb-pinmap.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/misc/brcmstb-usb-pinmap.c
+++ b/drivers/usb/misc/brcmstb-usb-pinmap.c
@@ -263,6 +263,8 @@ static int __init brcmstb_usb_pinmap_pro
return -EINVAL;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -EINVAL;
pdata = devm_kzalloc(&pdev->dev,
sizeof(*pdata) +
From: Geert Uytterhoeven <[email protected]>
commit 6687cd72aa9112a454a4646986e0402dd1b07d0e upstream.
R-Car M3-W ES3.0 is marketed as R-Car M3-W+ (R8A77961), and has its own
compatible value "renesas,r8a77961".
Hence using soc_device_match() with soc_id = "r8a7796" and revision =
"ES3.*" does not actually match running on an R-Car M3-W+ SoC.
Fix this by matching with soc_id = "r8a77961" instead.
Fixes: a38c078fea0b1393 ("mmc: renesas_sdhi: Avoid bad TAP in HS400")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Link: https://lore.kernel.org/r/ee8af5d631f5331139ffea714539030d97352e93.1622811525.git.geert+renesas@glider.be
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/renesas_sdhi_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -931,7 +931,7 @@ static const struct soc_device_attribute
{ .soc_id = "r8a7795", .revision = "ES3.*", .data = &sdhi_quirks_bad_taps2367 },
{ .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 },
{ .soc_id = "r8a7796", .revision = "ES1.*", .data = &sdhi_quirks_r8a7796_es13 },
- { .soc_id = "r8a7796", .revision = "ES3.*", .data = &sdhi_quirks_bad_taps1357 },
+ { .soc_id = "r8a77961", .data = &sdhi_quirks_bad_taps1357 },
{ .soc_id = "r8a77965", .data = &sdhi_quirks_r8a77965 },
{ .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 },
{ .soc_id = "r8a77990", .data = &sdhi_quirks_r8a77990 },
From: Frederic Weisbecker <[email protected]>
commit f268c3737ecaefcfeecfb4cb5e44958a8976f067 upstream.
Checking for and processing RCU-nocb deferred wakeup upon user/guest
entry is only relevant when nohz_full runs on the local CPU, otherwise
the periodic tick should take care of it.
Make sure we don't needlessly pollute these fast-paths as a -3%
performance regression on a will-it-scale.per_process_ops has been
reported so far.
Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/entry-kvm.h | 3 ++-
include/linux/tick.h | 7 +++++++
kernel/entry/common.c | 5 +++--
kernel/time/tick-sched.c | 1 +
4 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/include/linux/entry-kvm.h b/include/linux/entry-kvm.h
index 8b2b1d68b954..136b8d97d8c0 100644
--- a/include/linux/entry-kvm.h
+++ b/include/linux/entry-kvm.h
@@ -3,6 +3,7 @@
#define __LINUX_ENTRYKVM_H
#include <linux/entry-common.h>
+#include <linux/tick.h>
/* Transfer to guest mode work */
#ifdef CONFIG_KVM_XFER_TO_GUEST_WORK
@@ -57,7 +58,7 @@ int xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu);
static inline void xfer_to_guest_mode_prepare(void)
{
lockdep_assert_irqs_disabled();
- rcu_nocb_flush_deferred_wakeup();
+ tick_nohz_user_enter_prepare();
}
/**
diff --git a/include/linux/tick.h b/include/linux/tick.h
index 7340613c7eff..1a0ff88fa107 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -11,6 +11,7 @@
#include <linux/context_tracking_state.h>
#include <linux/cpumask.h>
#include <linux/sched.h>
+#include <linux/rcupdate.h>
#ifdef CONFIG_GENERIC_CLOCKEVENTS
extern void __init tick_init(void);
@@ -300,4 +301,10 @@ static inline void tick_nohz_task_switch(void)
__tick_nohz_task_switch();
}
+static inline void tick_nohz_user_enter_prepare(void)
+{
+ if (tick_nohz_full_cpu(smp_processor_id()))
+ rcu_nocb_flush_deferred_wakeup();
+}
+
#endif
diff --git a/kernel/entry/common.c b/kernel/entry/common.c
index a0b3b04fb596..bf16395b9e13 100644
--- a/kernel/entry/common.c
+++ b/kernel/entry/common.c
@@ -5,6 +5,7 @@
#include <linux/highmem.h>
#include <linux/livepatch.h>
#include <linux/audit.h>
+#include <linux/tick.h>
#include "common.h"
@@ -186,7 +187,7 @@ static unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
local_irq_disable_exit_to_user();
/* Check if any of the above work has queued a deferred wakeup */
- rcu_nocb_flush_deferred_wakeup();
+ tick_nohz_user_enter_prepare();
ti_work = READ_ONCE(current_thread_info()->flags);
}
@@ -202,7 +203,7 @@ static void exit_to_user_mode_prepare(struct pt_regs *regs)
lockdep_assert_irqs_disabled();
/* Flush pending rcuog wakeup before the last need_resched() check */
- rcu_nocb_flush_deferred_wakeup();
+ tick_nohz_user_enter_prepare();
if (unlikely(ti_work & EXIT_TO_USER_MODE_WORK))
ti_work = exit_to_user_mode_loop(regs, ti_work);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 828b091501ca..6784f27a3099 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -230,6 +230,7 @@ static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs)
#ifdef CONFIG_NO_HZ_FULL
cpumask_var_t tick_nohz_full_mask;
+EXPORT_SYMBOL_GPL(tick_nohz_full_mask);
bool tick_nohz_full_running;
EXPORT_SYMBOL_GPL(tick_nohz_full_running);
static atomic_t tick_dep_mask;
--
2.32.0
From: Steven Rostedt (VMware) <[email protected]>
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.
It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.
Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <[email protected]>
Tested-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1967,12 +1967,18 @@ static int ftrace_hash_ipmodify_update(s
static void print_ip_ins(const char *fmt, const unsigned char *p)
{
+ char ins[MCOUNT_INSN_SIZE];
int i;
+ if (copy_from_kernel_nofault(ins, p, MCOUNT_INSN_SIZE)) {
+ printk(KERN_CONT "%s[FAULT] %px\n", fmt, p);
+ return;
+ }
+
printk(KERN_CONT "%s", fmt);
for (i = 0; i < MCOUNT_INSN_SIZE; i++)
- printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]);
+ printk(KERN_CONT "%s%02x", i ? ":" : "", ins[i]);
}
enum ftrace_bug_type ftrace_bug_type;
From: Xiao Ni <[email protected]>
commit 9be148e408df7d361ec5afd6299b7736ff3928b0 upstream.
When PAGE_SIZE is greater than 4kB, multiple stripes may share the same
page. Thus, src_offs is added to async_xor_offs() with array of offsets.
However, async_xor() passes NULL src_offs to async_xor_offs(). In such
case, src_offs should not be updated. Add a check before the update.
Fixes: ceaf2966ab08(async_xor: increase src_offs when dropping destination page)
Cc: [email protected] # v5.10+
Reported-by: Oleksandr Shchirskyi <[email protected]>
Tested-by: Oleksandr Shchirskyi <[email protected]>
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/async_tx/async_xor.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -233,7 +233,8 @@ async_xor_offs(struct page *dest, unsign
if (submit->flags & ASYNC_TX_XOR_DROP_DST) {
src_cnt--;
src_list++;
- src_offs++;
+ if (src_offs)
+ src_offs++;
}
/* wait for any prerequisite operations */
From: Tor Vic <[email protected]>
commit 2398ce80152aae33b9501ef54452e09e8e8d4262 upstream.
Since LLVM commit 3787ee4, the '-stack-alignment' flag has been dropped
[1], leading to the following error message when building a LTO kernel
with Clang-13 and LLD-13:
ld.lld: error: -plugin-opt=-: ld.lld: Unknown command line argument
'-stack-alignment=8'. Try 'ld.lld --help'
ld.lld: Did you mean '--stackrealign=8'?
It also appears that the '-code-model' flag is not necessary anymore
starting with LLVM-9 [2].
Drop '-code-model' and make '-stack-alignment' conditional on LLD < 13.0.0.
These flags were necessary because these flags were not encoded in the
IR properly, so the link would restart optimizations without them. Now
there are properly encoded in the IR, and these flags exposing
implementation details are no longer necessary.
[1] https://reviews.llvm.org/D103048
[2] https://reviews.llvm.org/D52322
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/1377
Signed-off-by: Tor Vic <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/Makefile | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -192,8 +192,9 @@ endif
KBUILD_LDFLAGS += -m elf_$(UTS_MACHINE)
ifdef CONFIG_LTO_CLANG
-KBUILD_LDFLAGS += -plugin-opt=-code-model=kernel \
- -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
+ifeq ($(shell test $(CONFIG_LLD_VERSION) -lt 130000; echo $$?),0)
+KBUILD_LDFLAGS += -plugin-opt=-stack-alignment=$(if $(CONFIG_X86_32),4,8)
+endif
endif
ifdef CONFIG_X86_NEED_RELOCS
From: Maciej Żenczykowski <[email protected]>
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Gustavo A. R. Silva <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Michael R Sweet <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Pawel Laszczak <[email protected]>
Cc: Peter Chen <[email protected]>
Cc: Sudhakar Panneerselvam <[email protected]>
Cc: Wei Ming Chen <[email protected]>
Cc: Will McVicker <[email protected]>
Cc: Zqiang <[email protected]>
Reviewed-By: Lorenzo Colitti <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_ecm.c | 2 +-
drivers/usb/gadget/function/f_eem.c | 2 +-
drivers/usb/gadget/function/f_hid.c | 3 ++-
drivers/usb/gadget/function/f_loopback.c | 2 +-
drivers/usb/gadget/function/f_printer.c | 3 ++-
drivers/usb/gadget/function/f_rndis.c | 2 +-
drivers/usb/gadget/function/f_serial.c | 2 +-
drivers/usb/gadget/function/f_sourcesink.c | 3 ++-
drivers/usb/gadget/function/f_subset.c | 2 +-
drivers/usb/gadget/function/f_tcm.c | 3 ++-
10 files changed, 14 insertions(+), 10 deletions(-)
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -791,7 +791,7 @@ ecm_bind(struct usb_configuration *c, st
fs_ecm_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
- ecm_ss_function, NULL);
+ ecm_ss_function, ecm_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -302,7 +302,7 @@ static int eem_bind(struct usb_configura
eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
- eem_ss_function, NULL);
+ eem_ss_function, eem_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -802,7 +802,8 @@ static int hidg_bind(struct usb_configur
hidg_fs_out_ep_desc.bEndpointAddress;
status = usb_assign_descriptors(f, hidg_fs_descriptors,
- hidg_hs_descriptors, hidg_ss_descriptors, NULL);
+ hidg_hs_descriptors, hidg_ss_descriptors,
+ hidg_ss_descriptors);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -207,7 +207,7 @@ autoconf_fail:
ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
- ss_loopback_descs, NULL);
+ ss_loopback_descs, ss_loopback_descs);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1101,7 +1101,8 @@ autoconf_fail:
ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_printer_function,
- hs_printer_function, ss_printer_function, NULL);
+ hs_printer_function, ss_printer_function,
+ ss_printer_function);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_rndis.c
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -789,7 +789,7 @@ rndis_bind(struct usb_configuration *c,
ss_notify_desc.bEndpointAddress = fs_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, eth_fs_function, eth_hs_function,
- eth_ss_function, NULL);
+ eth_ss_function, eth_ss_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -233,7 +233,7 @@ static int gser_bind(struct usb_configur
gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
- gser_ss_function, NULL);
+ gser_ss_function, gser_ss_function);
if (status)
goto fail;
dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -431,7 +431,8 @@ no_iso:
ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, fs_source_sink_descs,
- hs_source_sink_descs, ss_source_sink_descs, NULL);
+ hs_source_sink_descs, ss_source_sink_descs,
+ ss_source_sink_descs);
if (ret)
return ret;
--- a/drivers/usb/gadget/function/f_subset.c
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -358,7 +358,7 @@ geth_bind(struct usb_configuration *c, s
fs_subset_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function,
- ss_eth_function, NULL);
+ ss_eth_function, ss_eth_function);
if (status)
goto fail;
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -2061,7 +2061,8 @@ static int tcm_bind(struct usb_configura
uasp_fs_cmd_desc.bEndpointAddress = uasp_ss_cmd_desc.bEndpointAddress;
ret = usb_assign_descriptors(f, uasp_fs_function_desc,
- uasp_hs_function_desc, uasp_ss_function_desc, NULL);
+ uasp_hs_function_desc, uasp_ss_function_desc,
+ uasp_ss_function_desc);
if (ret)
goto ep_fail;
From: Kyle Tso <[email protected]>
commit 063933f47a7af01650af9c4fbcc5831f1c4eb7d9 upstream.
When receiving Alert Message, if it is not unexpected but is
unsupported for some reason, the port should return Not_Supported
Message response.
Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the
OTP/OVP/OCP flags in the Event Flags field in Status Message no longer
require Get_PPS_Status Message to clear them. Thus remove it when
receiving Status Message with those flags being set.
In addition, add the missing AMS operations for Status Message.
Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages")
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 52 +++++++++++++++++++++--------------------
include/linux/usb/pd_ext_sdb.h | 4 ---
2 files changed, 27 insertions(+), 29 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2163,20 +2163,25 @@ static void tcpm_handle_alert(struct tcp
if (!type) {
tcpm_log(port, "Alert message received with no type");
+ tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
return;
}
/* Just handling non-battery alerts for now */
if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) {
- switch (port->state) {
- case SRC_READY:
- case SNK_READY:
+ if (port->pwr_role == TYPEC_SOURCE) {
+ port->upcoming_state = GET_STATUS_SEND;
+ tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS);
+ } else {
+ /*
+ * Do not check SinkTxOk here in case the Source doesn't set its Rp to
+ * SinkTxOk in time.
+ */
+ port->ams = GETTING_SOURCE_SINK_STATUS;
tcpm_set_state(port, GET_STATUS_SEND, 0);
- break;
- default:
- tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
- break;
}
+ } else {
+ tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
}
}
@@ -2420,7 +2425,12 @@ static void tcpm_pd_data_request(struct
tcpm_pd_handle_state(port, BIST_RX, BIST, 0);
break;
case PD_DATA_ALERT:
- tcpm_handle_alert(port, msg->payload, cnt);
+ if (port->state != SRC_READY && port->state != SNK_READY)
+ tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+ SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+ NONE_AMS, 0);
+ else
+ tcpm_handle_alert(port, msg->payload, cnt);
break;
case PD_DATA_BATT_STATUS:
case PD_DATA_GET_COUNTRY_INFO:
@@ -2744,24 +2754,16 @@ static void tcpm_pd_ext_msg_request(stru
switch (type) {
case PD_EXT_STATUS:
- /*
- * If PPS related events raised then get PPS status to clear
- * (see USB PD 3.0 Spec, 6.5.2.4)
- */
- if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] &
- USB_PD_EXT_SDB_PPS_EVENTS)
- tcpm_pd_handle_state(port, GET_PPS_STATUS_SEND,
- GETTING_SOURCE_SINK_STATUS, 0);
-
- else
- tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
- break;
case PD_EXT_PPS_STATUS:
- /*
- * For now the PPS status message is used to clear events
- * and nothing more.
- */
- tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
+ if (port->ams == GETTING_SOURCE_SINK_STATUS) {
+ tcpm_ams_finish(port);
+ tcpm_set_state(port, ready_state(port), 0);
+ } else {
+ /* unexpected Status or PPS_Status Message */
+ tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+ SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+ NONE_AMS, 0);
+ }
break;
case PD_EXT_SOURCE_CAP_EXT:
case PD_EXT_GET_BATT_CAP:
--- a/include/linux/usb/pd_ext_sdb.h
+++ b/include/linux/usb/pd_ext_sdb.h
@@ -24,8 +24,4 @@ enum usb_pd_ext_sdb_fields {
#define USB_PD_EXT_SDB_EVENT_OVP BIT(3)
#define USB_PD_EXT_SDB_EVENT_CF_CV_MODE BIT(4)
-#define USB_PD_EXT_SDB_PPS_EVENTS (USB_PD_EXT_SDB_EVENT_OCP | \
- USB_PD_EXT_SDB_EVENT_OTP | \
- USB_PD_EXT_SDB_EVENT_OVP)
-
#endif /* __LINUX_USB_PD_EXT_SDB_H */
From: Jack Pham <[email protected]>
commit 03715ea2e3dbbc56947137ce3b4ac18a726b2f87 upstream.
There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind. Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.
The exact scenario can be reproduced as follows:
- Start DWC3 in peripheral mode
- Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
- Run FunctionFS userspace application (open EPs, write descriptors, etc)
- Bind gadget driver to DWC3's UDC
- Switch DWC3 to host mode
=> dwc3_gadget_exit() is called. usb_del_gadget() will put the
ConfigFS driver instance on the gadget_driver_pending_list
- Stop FunctionFS application (closes the ep files)
- Switch DWC3 to peripheral mode
=> dwc3_gadget_init() fails as usb_add_gadget() calls
check_pending_gadget_drivers() and attempts to rebind the UDC
to the ConfigFS gadget but fails with -19 (-ENODEV) because the
FFS instance is not in FFS_ACTIVE state (userspace has not
re-opened and written the descriptors yet, i.e. desc_ready!=0).
- Switch DWC3 back to host mode
=> dwc3_gadget_exit() is called again, but this time dwc->gadget
is invalid.
Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.
Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.
Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
Cc: <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4012,6 +4012,7 @@ err5:
dwc3_gadget_free_endpoints(dwc);
err4:
usb_put_gadget(dwc->gadget);
+ dwc->gadget = NULL;
err3:
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
@@ -4031,6 +4032,9 @@ err0:
void dwc3_gadget_exit(struct dwc3 *dwc)
{
+ if (!dwc->gadget)
+ return;
+
usb_del_gadget(dwc->gadget);
dwc3_gadget_free_endpoints(dwc);
usb_put_gadget(dwc->gadget);
From: Mario Limonciello <[email protected]>
commit d1658268e43980c071dbffc3d894f6f6c4b6732a upstream.
The XHCI controller is required to enter D3hot rather than D3cold for AMD
s2idle on this hardware generation.
Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by
host in resume and eventually this results in xhci resume failures during
the s2idle wakeup.
Link: https://lore.kernel.org/linux-usb/[email protected]/
Suggested-by: Prike Liang <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Cc: stable <[email protected]> # 5.11+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 7 ++++++-
drivers/usb/host/xhci.h | 1 +
2 files changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -59,6 +59,7 @@
#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI 0x461e
+#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
@@ -182,6 +183,10 @@ static void xhci_pci_quirks(struct devic
(pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+ pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
+ xhci->quirks |= XHCI_BROKEN_D3COLD;
+
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_INTEL_HOST;
@@ -539,7 +544,7 @@ static int xhci_pci_suspend(struct usb_h
* Systems with the TI redriver that loses port status change events
* need to have the registers polled during D3, so avoid D3cold.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
pci_d3cold_disable(pdev);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1892,6 +1892,7 @@ struct xhci_hcd {
#define XHCI_DISABLE_SPARSE BIT_ULL(38)
#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
+#define XHCI_BROKEN_D3COLD BIT_ULL(41)
unsigned int num_active_eps;
unsigned int limit_active_eps;
From: Maciej Żenczykowski <[email protected]>
commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <[email protected]>
Cc: Bryan O'Donoghue <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_ncm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1101,11 +1101,11 @@ static struct sk_buff *ncm_wrap_ntb(stru
ncm->ndp_dgram_count = 1;
/* Note: we skip opts->next_ndp_index */
- }
- /* Delay the timer. */
- hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
- HRTIMER_MODE_REL_SOFT);
+ /* Start the timer. */
+ hrtimer_start(&ncm->task_timer, TX_TIMEOUT_NSECS,
+ HRTIMER_MODE_REL_SOFT);
+ }
/* Add the datagram position entries */
ntb_ndp = skb_put_zero(ncm->skb_tx_ndp, dgram_idx_len);
From: Andy Shevchenko <[email protected]>
commit d5ab95da2a41567440097c277c5771ad13928dad upstream.
As LKP noticed the Sparse is not happy about strict type handling:
.../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header
.../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header
Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support")
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/wcove.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -378,7 +378,7 @@ static int wcove_pd_transmit(struct tcpc
const u8 *data = (void *)msg;
int i;
- for (i = 0; i < pd_header_cnt(msg->header) * 4 + 2; i++) {
+ for (i = 0; i < pd_header_cnt_le(msg->header) * 4 + 2; i++) {
ret = regmap_write(wcove->regmap, USBC_TX_DATA + i,
data[i]);
if (ret)
From: Jack Pham <[email protected]>
commit 8d396bb0a5b62b326f6be7594d8bd46b088296bd upstream.
The DWC3 DebugFS directory and files are currently created once
during probe. This includes creation of subdirectories for each
of the gadget's endpoints. This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().
However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked. Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later. And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.
So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.
Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/debug.h | 3 +++
drivers/usb/dwc3/debugfs.c | 21 ++-------------------
drivers/usb/dwc3/gadget.c | 3 +++
3 files changed, 8 insertions(+), 19 deletions(-)
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -413,9 +413,12 @@ static inline const char *dwc3_gadget_ge
#ifdef CONFIG_DEBUG_FS
+extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
extern void dwc3_debugfs_init(struct dwc3 *d);
extern void dwc3_debugfs_exit(struct dwc3 *d);
#else
+static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{ }
static inline void dwc3_debugfs_init(struct dwc3 *d)
{ }
static inline void dwc3_debugfs_exit(struct dwc3 *d)
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -890,30 +890,14 @@ static void dwc3_debugfs_create_endpoint
}
}
-static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep,
- struct dentry *parent)
+void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
{
struct dentry *dir;
- dir = debugfs_create_dir(dep->name, parent);
+ dir = debugfs_create_dir(dep->name, dep->dwc->root);
dwc3_debugfs_create_endpoint_files(dep, dir);
}
-static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
- struct dentry *parent)
-{
- int i;
-
- for (i = 0; i < dwc->num_eps; i++) {
- struct dwc3_ep *dep = dwc->eps[i];
-
- if (!dep)
- continue;
-
- dwc3_debugfs_create_endpoint_dir(dep, parent);
- }
-}
-
void dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
@@ -944,7 +928,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
&dwc3_testmode_fops);
debugfs_create_file("link_state", 0644, root, dwc,
&dwc3_link_state_fops);
- dwc3_debugfs_create_endpoint_dirs(dwc, root);
}
}
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2720,6 +2720,8 @@ static int dwc3_gadget_init_endpoint(str
INIT_LIST_HEAD(&dep->started_list);
INIT_LIST_HEAD(&dep->cancelled_list);
+ dwc3_debugfs_create_endpoint_dir(dep);
+
return 0;
}
@@ -2763,6 +2765,7 @@ static void dwc3_gadget_free_endpoints(s
list_del(&dep->endpoint.ep_list);
}
+ debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root));
kfree(dep);
}
}
From: Wenli Looi <[email protected]>
commit 43c85d770db80cb135f576f8fde6ff1a08e707a4 upstream.
The sinfo.pertid and sinfo.generation variables are not initialized and
it causes a crash when we use this as a wireless access point.
[ 456.873025] ------------[ cut here ]------------
[ 456.878198] kernel BUG at mm/slub.c:3968!
[ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ snip ]
[ 457.271004] Backtrace:
[ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4)
[ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00
[ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc)
[ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000
[ 457.309586] r4:ec46d9e0
[ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs])
[ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c
[ 457.332831] r4:c1606788
[ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs])
[ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000
[ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs])
[ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000
[ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs])
[ 457.384744] r5:f086e000 r4:f086c000
[ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174)
[ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200
[ 457.406828] r4:e8369900
[ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8)
[ 457.423356] ffa0: 00000000 00000000 00000000 00000000
[ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4
[ 457.457750] r4:e9975200
[ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2)
[ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]---
Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/
Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info")
Fixes: f5ea9120be2e ("nl80211: add generation number to all dumps")
Signed-off-by: Wenli Looi <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -2359,7 +2359,7 @@ void rtw_cfg80211_indicate_sta_assoc(str
DBG_871X(FUNC_ADPT_FMT"\n", FUNC_ADPT_ARG(padapter));
{
- struct station_info sinfo;
+ struct station_info sinfo = {};
u8 ie_offset;
if (GetFrameSubType(pmgmt_frame) == WIFI_ASSOCREQ)
ie_offset = _ASOCREQ_IE_OFFSET_;
From: Dmitry Osipenko <[email protected]>
commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream.
The MAX77620 driver fails to re-probe on deferred probe because driver
core tries to claim resources that are already claimed by the PINCTRL
device. Use device_set_of_node_from_dev() helper which marks OF node as
reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC
device on the re-probe.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/max77620-regulator.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -814,6 +814,13 @@ static int max77620_regulator_probe(stru
config.dev = dev;
config.driver_data = pmic;
+ /*
+ * Set of_node_reuse flag to prevent driver core from attempting to
+ * claim any pinmux resources already claimed by the parent device.
+ * Otherwise PMIC driver will fail to re-probe.
+ */
+ device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
for (id = 0; id < MAX77620_NUM_REGS; id++) {
struct regulator_dev *rdev;
struct regulator_desc *rdesc;
From: Paolo Bonzini <[email protected]>
commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream.
KVM's mechanism for accessing guest memory translates a guest physical
address (gpa) to a host virtual address using the right-shifted gpa
(also known as gfn) and a struct kvm_memory_slot. The translation is
performed in __gfn_to_hva_memslot using the following formula:
hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE
It is expected that gfn falls within the boundaries of the guest's
physical memory. However, a guest can access invalid physical addresses
in such a way that the gfn is invalid.
__gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first
retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot
does check that the gfn falls within the boundaries of the guest's
physical memory or not, a CPU can speculate the result of the check and
continue execution speculatively using an illegal gfn. The speculation
can result in calculating an out-of-bounds hva. If the resulting host
virtual address is used to load another guest physical address, this
is effectively a Spectre gadget consisting of two consecutive reads,
the second of which is data dependent on the first.
Right now it's not clear if there are any cases in which this is
exploitable. One interesting case was reported by the original author
of this patch, and involves visiting guest page tables on x86. Right
now these are not vulnerable because the hva read goes through get_user(),
which contains an LFENCE speculation barrier. However, there are
patches in progress for x86 uaccess.h to mask kernel addresses instead of
using LFENCE; once these land, a guest could use speculation to read
from the VMM's ring 3 address space. Other architectures such as ARM
already use the address masking method, and would be susceptible to
this same kind of data-dependent access gadgets. Therefore, this patch
proactively protects from these attacks by masking out-of-bounds gfns
in __gfn_to_hva_memslot, which blocks speculation of invalid hvas.
Sean Christopherson noted that this patch does not cover
kvm_read_guest_offset_cached. This however is limited to a few bytes
past the end of the cache, and therefore it is unlikely to be useful in
the context of building a chain of data dependent accesses.
Reported-by: Artemiy Margaritov <[email protected]>
Co-developed-by: Artemiy Margaritov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1118,7 +1118,15 @@ __gfn_to_memslot(struct kvm_memslots *sl
static inline unsigned long
__gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn)
{
- return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
+ /*
+ * The index was checked originally in search_memslots. To avoid
+ * that a malicious guest builds a Spectre gadget out of e.g. page
+ * table walks, do not let the processor speculate loads outside
+ * the guest's registered memslots.
+ */
+ unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
+ slot->npages);
+ return slot->userspace_addr + offset * PAGE_SIZE;
}
static inline int memslot_id(struct kvm *kvm, gfn_t gfn)
From: Sanket Parmar <[email protected]>
commit d6eef886903c4bb5af41b9a31d4ba11dc7a6f8e8 upstream.
ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
as TDL source for IN endpoints. To fix it, TDL_CHK is only
enabled for OUT endpoints.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by: Aswath Govindraju <[email protected]>
Signed-off-by: Sanket Parmar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/cdns3/cdns3-gadget.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -2006,7 +2006,7 @@ static void cdns3_configure_dmult(struct
else
mask = BIT(priv_ep->num);
- if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+ if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
cdns3_set_register_bit(®s->tdl_from_trb, mask);
cdns3_set_register_bit(®s->tdl_beh, mask);
cdns3_set_register_bit(®s->tdl_beh2, mask);
@@ -2045,15 +2045,13 @@ int cdns3_ep_config(struct cdns3_endpoin
case USB_ENDPOINT_XFER_INT:
ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
- if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
- priv_dev->dev_ver > DEV_VER_V2)
+ if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
ep_cfg |= EP_CFG_TDL_CHK;
break;
case USB_ENDPOINT_XFER_BULK:
ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
- if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
- priv_dev->dev_ver > DEV_VER_V2)
+ if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
ep_cfg |= EP_CFG_TDL_CHK;
break;
default:
From: Axel Lin <[email protected]>
commit 86ab21cc39e6b99b7065ab9008c90bec5dec535a upstream.
Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.
Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <[email protected]>
Reviewed-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/rtmv20-regulator.c | 42 +++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -103,9 +103,47 @@ static int rtmv20_lsw_disable(struct reg
return 0;
}
+static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ int sel;
+
+ if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA)
+ return -EINVAL;
+
+ if (max_uA > RTMV20_LSW_MAXUA)
+ max_uA = RTMV20_LSW_MAXUA;
+
+ sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA;
+
+ /* Ensure the selected setting is still in range */
+ if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA)
+ return -EINVAL;
+
+ sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+ rdev->desc->csel_mask, sel);
+}
+
+static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+ if (ret)
+ return ret;
+
+ val &= rdev->desc->csel_mask;
+ val >>= ffs(rdev->desc->csel_mask) - 1;
+
+ return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA;
+}
+
static const struct regulator_ops rtmv20_regulator_ops = {
- .set_current_limit = regulator_set_current_limit_regmap,
- .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = rtmv20_lsw_set_current_limit,
+ .get_current_limit = rtmv20_lsw_get_current_limit,
.enable = rtmv20_lsw_enable,
.disable = rtmv20_lsw_disable,
.is_enabled = regulator_is_enabled_regmap,
From: Axel Lin <[email protected]>
commit 4c668630bf8ea90a041fc69c9984486e0f56682d upstream.
Current .n_voltages settings do not cover the latest 2 valid selectors,
so it fails to set voltage for the hightest voltage support.
The latest linear range has step_uV = 0, so it does not matter if we
count the .n_voltages to maximum selector + 1 or the first selector of
latest linear range + 1.
To simplify calculating the n_voltages, let's just set the
.n_voltages to maximum selector + 1.
Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators")
Signed-off-by: Axel Lin <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mfd/rohm-bd71828.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -26,11 +26,11 @@ enum {
BD71828_REGULATOR_AMOUNT,
};
-#define BD71828_BUCK1267_VOLTS 0xEF
-#define BD71828_BUCK3_VOLTS 0x10
-#define BD71828_BUCK4_VOLTS 0x20
-#define BD71828_BUCK5_VOLTS 0x10
-#define BD71828_LDO_VOLTS 0x32
+#define BD71828_BUCK1267_VOLTS 0x100
+#define BD71828_BUCK3_VOLTS 0x20
+#define BD71828_BUCK4_VOLTS 0x40
+#define BD71828_BUCK5_VOLTS 0x20
+#define BD71828_LDO_VOLTS 0x40
/* LDO6 is fixed 1.8V voltage */
#define BD71828_LDO_6_VOLTAGE 1800000
From: Axel Lin <[email protected]>
commit 1963fa67d78674a110bc9b2a8b1e226967692f05 upstream.
The .n_voltages was missed for pickable linear ranges, fix it.
The min_sel for each pickable range should be starting from 0.
Also fix atc260x_ldo_voltage_range_sel setting (bit 5 - LDO<N>_VOL_SEL
in datasheet).
Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <[email protected]>
Reviewed-by: Cristian Ciocaltea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/atc260x-regulator.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/regulator/atc260x-regulator.c
+++ b/drivers/regulator/atc260x-regulator.c
@@ -28,16 +28,16 @@ static const struct linear_range atc2609
static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
- REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 0, 12, 100000),
};
static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
- REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+ REGULATOR_LINEAR_RANGE(2100000, 0, 11, 100000),
};
static const unsigned int atc260x_ldo_voltage_range_sel[] = {
- 0x0, 0x1,
+ 0x0, 0x20,
};
static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
@@ -411,7 +411,7 @@ enum atc2609a_reg_ids {
.owner = THIS_MODULE, \
}
-#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
+#define atc2609a_reg_desc_ldo_range_pick(num, n_range, n_volt) { \
.name = "LDO"#num, \
.supply_name = "ldo"#num, \
.of_match = of_match_ptr("ldo"#num), \
@@ -421,6 +421,7 @@ enum atc2609a_reg_ids {
.type = REGULATOR_VOLTAGE, \
.linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
.n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
+ .n_voltages = n_volt, \
.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
.vsel_mask = GENMASK(4, 1), \
.vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
@@ -458,12 +459,12 @@ static const struct regulator_desc atc26
atc2609a_reg_desc_ldo_bypass(0),
atc2609a_reg_desc_ldo_bypass(1),
atc2609a_reg_desc_ldo_bypass(2),
- atc2609a_reg_desc_ldo_range_pick(3, 0),
- atc2609a_reg_desc_ldo_range_pick(4, 0),
+ atc2609a_reg_desc_ldo_range_pick(3, 0, 29),
+ atc2609a_reg_desc_ldo_range_pick(4, 0, 29),
atc2609a_reg_desc_ldo(5),
- atc2609a_reg_desc_ldo_range_pick(6, 1),
- atc2609a_reg_desc_ldo_range_pick(7, 0),
- atc2609a_reg_desc_ldo_range_pick(8, 0),
+ atc2609a_reg_desc_ldo_range_pick(6, 1, 28),
+ atc2609a_reg_desc_ldo_range_pick(7, 0, 29),
+ atc2609a_reg_desc_ldo_range_pick(8, 0, 29),
atc2609a_reg_desc_ldo_fixed(9),
};
From: Matti Vaittinen <[email protected]>
commit bc537e65b09a05923f98a31920d1ab170e648dba upstream.
Changing the BD71837 voltages for other regulators except the first 4 BUCKs
should be forbidden when the regulator is enabled. There may be out-of-spec
voltage spikes if the voltage of these "non DVS" bucks is changed when
enabled. This restriction was accidentally removed when the LDO voltage
change was allowed for BD71847. (It was not noticed that the BD71837
BUCK7 used same voltage setting function as LDOs).
Additionally this bug causes incorrect voltage monitoring register access.
The voltage change function accidentally used for bd71837 BUCK7 is
intended to only handle LDO voltage changes. A BD71847 LDO specific
voltage monitoring disabling code gets executed on BD71837 and register
offsets are wrongly calculated as regulator is assumed to be an LDO.
Prevent the BD71837 BUCK7 voltage change when BUCK7 is enabled by using
the correct voltage setting operation.
Fixes: 9bcbabafa19b ("regulator: bd718x7: remove voltage change restriction from BD71847 LDOs")
Signed-off-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/bd8c00931421fafa57e3fdf46557a83075b7cc17.1622610103.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/bd718x7-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -364,7 +364,7 @@ BD718XX_OPS(bd71837_buck_regulator_ops,
NULL);
BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table,
- regulator_map_voltage_ascend, bd718xx_set_voltage_sel_restricted,
+ regulator_map_voltage_ascend, bd71837_set_voltage_sel_restricted,
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
NULL);
/*
From: Axel Lin <[email protected]>
commit 34991ee96fd8477479dd15adadceb6b28b30d9b0 upstream.
Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Christoph Fritz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/fan53880.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/regulator/fan53880.c
+++ b/drivers/regulator/fan53880.c
@@ -51,6 +51,7 @@ static const struct regulator_ops fan538
REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \
}, \
.n_linear_ranges = 2, \
+ .n_voltages = 0x74, \
.vsel_reg = FAN53880_LDO ## _num ## VOUT, \
.vsel_mask = 0x7f, \
.enable_reg = FAN53880_ENABLE, \
@@ -76,6 +77,7 @@ static const struct regulator_desc fan53
REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
},
.n_linear_ranges = 2,
+ .n_voltages = 0xf8,
.vsel_reg = FAN53880_BUCKVOUT,
.vsel_mask = 0x7f,
.enable_reg = FAN53880_ENABLE,
@@ -95,6 +97,7 @@ static const struct regulator_desc fan53
REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
},
.n_linear_ranges = 2,
+ .n_voltages = 0x71,
.vsel_reg = FAN53880_BOOSTVOUT,
.vsel_mask = 0x7f,
.enable_reg = FAN53880_ENABLE_BOOST,
From: Dmitry Baryshkov <[email protected]>
commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream.
For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.
Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/core.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1422,6 +1422,12 @@ static int set_machine_constraints(struc
* and we have control then make sure it is enabled.
*/
if (rdev->constraints->always_on || rdev->constraints->boot_on) {
+ /* If we want to enable this regulator, make sure that we know
+ * the supplying regulator.
+ */
+ if (rdev->supply_name && !rdev->supply)
+ return -EPROBE_DEFER;
+
if (rdev->supply) {
ret = regulator_enable(rdev->supply);
if (ret < 0) {
From: Wesley Cheng <[email protected]>
commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Signed-off-by: Wesley Cheng <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3567,6 +3567,9 @@ static void ffs_func_unbind(struct usb_c
ffs->func = NULL;
}
+ /* Drain any pending AIO completions */
+ drain_workqueue(ffs->io_completion_wq);
+
if (!--opts->refcnt)
functionfs_unbind(ffs);
From: George McCollister <[email protected]>
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.
Add PID for the NovaTech OrionMX so it can be automatically detected.
Signed-off-by: George McCollister <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -611,6 +611,7 @@ static const struct usb_device_id id_tab
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -581,6 +581,7 @@
#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
#define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */
#define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */
+#define FTDI_NT_ORIONMX_PID 0x7c93 /* OrionMX */
/*
* Synapse Wireless product ids (FTDI_VID)
From: Kyle Tso <[email protected]>
commit 80137c18737c30d20ee630e442405236d96898a7 upstream.
tcpm_ams_start is used to initiate an AMS as well as checking Collision
Avoidance conditions but not for flagging passive AMS (initiated by the
port partner). Fix the misuses of tcpm_ams_start in tcpm_pd_svdm.
ATTENTION doesn't need responses so the AMS flag is not needed here.
Fixes: 0bc3ee92880d ("usb: typec: tcpm: Properly interrupt VDM AMS")
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1537,7 +1537,7 @@ static int tcpm_pd_svdm(struct tcpm_port
svdm_version = PD_VDO_SVDM_VER(p[0]);
}
- tcpm_ams_start(port, DISCOVER_IDENTITY);
+ port->ams = DISCOVER_IDENTITY;
/*
* PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
* PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
@@ -1560,19 +1560,18 @@ static int tcpm_pd_svdm(struct tcpm_port
}
break;
case CMD_DISCOVER_SVID:
- tcpm_ams_start(port, DISCOVER_SVIDS);
+ port->ams = DISCOVER_SVIDS;
break;
case CMD_DISCOVER_MODES:
- tcpm_ams_start(port, DISCOVER_MODES);
+ port->ams = DISCOVER_MODES;
break;
case CMD_ENTER_MODE:
- tcpm_ams_start(port, DFP_TO_UFP_ENTER_MODE);
+ port->ams = DFP_TO_UFP_ENTER_MODE;
break;
case CMD_EXIT_MODE:
- tcpm_ams_start(port, DFP_TO_UFP_EXIT_MODE);
+ port->ams = DFP_TO_UFP_EXIT_MODE;
break;
case CMD_ATTENTION:
- tcpm_ams_start(port, ATTENTION);
/* Attention command does not have response */
*adev_action = ADEV_ATTENTION;
return 0;
From: Wei Yongjun <[email protected]>
commit 0b67808ade8893a1b3608ddd74fac7854786c919 upstream.
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check")
Cc: stable <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Reviewed-by: Hemant kumar <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bus/mhi/pci_generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -505,7 +505,7 @@ static void mhi_pci_remove(struct pci_de
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
- del_timer(&mhi_pdev->health_check_timer);
+ del_timer_sync(&mhi_pdev->health_check_timer);
cancel_work_sync(&mhi_pdev->recovery_work);
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
From: Kyle Tso <[email protected]>
commit f41bfc7e9c7c1d721c8752f1853cde43e606ad43 upstream.
In USB PD Spec Rev 3.1 Ver 1.0, section "6.12.5 Applicability of
Structured VDM Commands", DFP is allowed and recommended to respond to
Discovery Identity with ACK. And in section "6.4.4.2.5.1 Commands other
than Attention", NAK should be returned only when receiving Messages
with invalid fields, Messages in wrong situation, or unrecognize
Messages.
Still keep the original design for SVDM Version 1.0 for backward
compatibilities.
Fixes: 193a68011fdc ("staging: typec: tcpm: Respond to Discover Identity commands")
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1531,19 +1531,25 @@ static int tcpm_pd_svdm(struct tcpm_port
if (PD_VDO_VID(p[0]) != USB_SID_PD)
break;
- if (PD_VDO_SVDM_VER(p[0]) < svdm_version)
+ if (PD_VDO_SVDM_VER(p[0]) < svdm_version) {
typec_partner_set_svdm_version(port->partner,
PD_VDO_SVDM_VER(p[0]));
+ svdm_version = PD_VDO_SVDM_VER(p[0]);
+ }
tcpm_ams_start(port, DISCOVER_IDENTITY);
- /* 6.4.4.3.1: Only respond as UFP (device) */
- if (port->data_role == TYPEC_DEVICE &&
+ /*
+ * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
+ * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
+ * "wrong configuation" or "Unrecognized"
+ */
+ if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) &&
port->nr_snk_vdo) {
/*
* Product Type DFP and Connector Type are not defined in SVDM
* version 1.0 and shall be set to zero.
*/
- if (typec_get_negotiated_svdm_version(typec) < SVDM_VER_2_0)
+ if (svdm_version < SVDM_VER_2_0)
response[1] = port->snk_vdo[0] & ~IDH_DFP_MASK
& ~IDH_CONN_MASK;
else
From: Jonathan Marek <[email protected]>
commit ce86c239e4d218ae6040bec18e6d19a58edb8b7c upstream.
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3a5 ("drm/msm/a6xx: Clear shadow on suspend")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Akhil P Oommen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1284,7 +1284,7 @@ static int a6xx_pm_suspend(struct msm_gp
if (ret)
return ret;
- if (adreno_gpu->base.hw_apriv || a6xx_gpu->has_whereami)
+ if (a6xx_gpu->shadow_bo)
for (i = 0; i < gpu->nr_rings; i++)
a6xx_gpu->shadow[i] = 0;
From: Maciej Żenczykowski <[email protected]>
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/config.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -164,6 +164,14 @@ int usb_assign_descriptors(struct usb_fu
{
struct usb_gadget *g = f->config->cdev->gadget;
+ /* super-speed-plus descriptor falls back to super-speed one,
+ * if such a descriptor was provided, thus avoiding a NULL
+ * pointer dereference if a 5gbps capable gadget is used with
+ * a 10gbps capable config (device port + cable + host port)
+ */
+ if (!ssp)
+ ssp = ss;
+
if (fs) {
f->fs_descriptors = usb_copy_descriptors(fs);
if (!f->fs_descriptors)
From: Andy Shevchenko <[email protected]>
commit 843fabdd7623271330af07f1b7fbd7fabe33c8de upstream.
devm_ioremap_resource() can return an error, add missed check for it.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -586,6 +586,11 @@ static int pmc_usb_probe_iom(struct pmc_
return -ENOMEM;
}
+ if (IS_ERR(pmc->iom_base)) {
+ put_device(&adev->dev);
+ return PTR_ERR(pmc->iom_base);
+ }
+
pmc->iom_adev = adev;
return 0;
From: Linus Walleij <[email protected]>
commit c8a570443943304cac2e4186dbce6989b6c2b8b5 upstream.
The calclulation of how many bytes we stuff into the
DSI pipeline for video mode panels is off by three
orders of magnitude because we did not account for the
fact that the DRM mode clock is in kilohertz rather
than hertz.
This used to be:
drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal
which would become for example for s6e63m0:
60 x 514 x 831 = 25628040 Hz, but mode->clock is
25628 as it is in kHz.
This affects only the Samsung GT-I8190 "Golden" phone
right now since it is the only MCDE device with a video
mode display.
Curiously some specimen work with this code and wild
settings in the EOL and empty packets at the end of the
display, but I have noticed an eeire flicker until now.
Others were not so lucky and got black screens.
Cc: Ville Syrjälä <[email protected]>
Reported-by: Stephan Gerhold <[email protected]>
Fixes: 920dd1b1425b ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh")
Signed-off-by: Linus Walleij <[email protected]>
Tested-by: Stephan Gerhold <[email protected]>
Reviewed-by: Stephan Gerhold <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/mcde/mcde_dsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/mcde/mcde_dsi.c
+++ b/drivers/gpu/drm/mcde/mcde_dsi.c
@@ -577,7 +577,7 @@ static void mcde_dsi_setup_video_mode(st
* porches and sync.
*/
/* (ps/s) / (pixels/s) = ps/pixels */
- pclk = DIV_ROUND_UP_ULL(1000000000000, mode->clock);
+ pclk = DIV_ROUND_UP_ULL(1000000000000, (mode->clock * 1000));
dev_dbg(d->dev, "picoseconds between two pixels: %llu\n",
pclk);
From: Jonathan Marek <[email protected]>
commit 408434036958699a7f50ddec984f7ba33e11a8f5 upstream.
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Akhil P Oommen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 151 +++++++++++++++++++++++++---------
drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 2
2 files changed, 113 insertions(+), 40 deletions(-)
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -157,7 +157,7 @@ static void a6xx_submit(struct msm_gpu *
* GPU registers so we need to add 0x1a800 to the register value on A630
* to get the right value from PM4.
*/
- get_stats_counter(ring, REG_A6XX_GMU_ALWAYS_ON_COUNTER_L + 0x1a800,
+ get_stats_counter(ring, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO,
rbmemptr_stats(ring, index, alwayson_start));
/* Invalidate CCU depth and color */
@@ -187,7 +187,7 @@ static void a6xx_submit(struct msm_gpu *
get_stats_counter(ring, REG_A6XX_RBBM_PERFCTR_CP_0_LO,
rbmemptr_stats(ring, index, cpcycles_end));
- get_stats_counter(ring, REG_A6XX_GMU_ALWAYS_ON_COUNTER_L + 0x1a800,
+ get_stats_counter(ring, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO,
rbmemptr_stats(ring, index, alwayson_end));
/* Write the fence to the scratch register */
@@ -206,8 +206,8 @@ static void a6xx_submit(struct msm_gpu *
OUT_RING(ring, submit->seqno);
trace_msm_gpu_submit_flush(submit,
- gmu_read64(&a6xx_gpu->gmu, REG_A6XX_GMU_ALWAYS_ON_COUNTER_L,
- REG_A6XX_GMU_ALWAYS_ON_COUNTER_H));
+ gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO,
+ REG_A6XX_CP_ALWAYS_ON_COUNTER_HI));
a6xx_flush(gpu, ring);
}
@@ -462,6 +462,113 @@ static void a6xx_set_hwcg(struct msm_gpu
gpu_write(gpu, REG_A6XX_RBBM_CLOCK_CNTL, state ? clock_cntl_on : 0);
}
+/* For a615, a616, a618, A619, a630, a640 and a680 */
+static const u32 a6xx_protect[] = {
+ A6XX_PROTECT_RDONLY(0x00000, 0x04ff),
+ A6XX_PROTECT_RDONLY(0x00501, 0x0005),
+ A6XX_PROTECT_RDONLY(0x0050b, 0x02f4),
+ A6XX_PROTECT_NORDWR(0x0050e, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00510, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00534, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00800, 0x0082),
+ A6XX_PROTECT_NORDWR(0x008a0, 0x0008),
+ A6XX_PROTECT_NORDWR(0x008ab, 0x0024),
+ A6XX_PROTECT_RDONLY(0x008de, 0x00ae),
+ A6XX_PROTECT_NORDWR(0x00900, 0x004d),
+ A6XX_PROTECT_NORDWR(0x0098d, 0x0272),
+ A6XX_PROTECT_NORDWR(0x00e00, 0x0001),
+ A6XX_PROTECT_NORDWR(0x00e03, 0x000c),
+ A6XX_PROTECT_NORDWR(0x03c00, 0x00c3),
+ A6XX_PROTECT_RDONLY(0x03cc4, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x08630, 0x01cf),
+ A6XX_PROTECT_NORDWR(0x08e00, 0x0000),
+ A6XX_PROTECT_NORDWR(0x08e08, 0x0000),
+ A6XX_PROTECT_NORDWR(0x08e50, 0x001f),
+ A6XX_PROTECT_NORDWR(0x09624, 0x01db),
+ A6XX_PROTECT_NORDWR(0x09e70, 0x0001),
+ A6XX_PROTECT_NORDWR(0x09e78, 0x0187),
+ A6XX_PROTECT_NORDWR(0x0a630, 0x01cf),
+ A6XX_PROTECT_NORDWR(0x0ae02, 0x0000),
+ A6XX_PROTECT_NORDWR(0x0ae50, 0x032f),
+ A6XX_PROTECT_NORDWR(0x0b604, 0x0000),
+ A6XX_PROTECT_NORDWR(0x0be02, 0x0001),
+ A6XX_PROTECT_NORDWR(0x0be20, 0x17df),
+ A6XX_PROTECT_NORDWR(0x0f000, 0x0bff),
+ A6XX_PROTECT_RDONLY(0x0fc00, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x11c00, 0x0000), /* note: infinite range */
+};
+
+/* These are for a620 and a650 */
+static const u32 a650_protect[] = {
+ A6XX_PROTECT_RDONLY(0x00000, 0x04ff),
+ A6XX_PROTECT_RDONLY(0x00501, 0x0005),
+ A6XX_PROTECT_RDONLY(0x0050b, 0x02f4),
+ A6XX_PROTECT_NORDWR(0x0050e, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00510, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00534, 0x0000),
+ A6XX_PROTECT_NORDWR(0x00800, 0x0082),
+ A6XX_PROTECT_NORDWR(0x008a0, 0x0008),
+ A6XX_PROTECT_NORDWR(0x008ab, 0x0024),
+ A6XX_PROTECT_RDONLY(0x008de, 0x00ae),
+ A6XX_PROTECT_NORDWR(0x00900, 0x004d),
+ A6XX_PROTECT_NORDWR(0x0098d, 0x0272),
+ A6XX_PROTECT_NORDWR(0x00e00, 0x0001),
+ A6XX_PROTECT_NORDWR(0x00e03, 0x000c),
+ A6XX_PROTECT_NORDWR(0x03c00, 0x00c3),
+ A6XX_PROTECT_RDONLY(0x03cc4, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x08630, 0x01cf),
+ A6XX_PROTECT_NORDWR(0x08e00, 0x0000),
+ A6XX_PROTECT_NORDWR(0x08e08, 0x0000),
+ A6XX_PROTECT_NORDWR(0x08e50, 0x001f),
+ A6XX_PROTECT_NORDWR(0x08e80, 0x027f),
+ A6XX_PROTECT_NORDWR(0x09624, 0x01db),
+ A6XX_PROTECT_NORDWR(0x09e60, 0x0011),
+ A6XX_PROTECT_NORDWR(0x09e78, 0x0187),
+ A6XX_PROTECT_NORDWR(0x0a630, 0x01cf),
+ A6XX_PROTECT_NORDWR(0x0ae02, 0x0000),
+ A6XX_PROTECT_NORDWR(0x0ae50, 0x032f),
+ A6XX_PROTECT_NORDWR(0x0b604, 0x0000),
+ A6XX_PROTECT_NORDWR(0x0b608, 0x0007),
+ A6XX_PROTECT_NORDWR(0x0be02, 0x0001),
+ A6XX_PROTECT_NORDWR(0x0be20, 0x17df),
+ A6XX_PROTECT_NORDWR(0x0f000, 0x0bff),
+ A6XX_PROTECT_RDONLY(0x0fc00, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x18400, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x1a800, 0x1fff),
+ A6XX_PROTECT_NORDWR(0x1f400, 0x0443),
+ A6XX_PROTECT_RDONLY(0x1f844, 0x007b),
+ A6XX_PROTECT_NORDWR(0x1f887, 0x001b),
+ A6XX_PROTECT_NORDWR(0x1f8c0, 0x0000), /* note: infinite range */
+};
+
+static void a6xx_set_cp_protect(struct msm_gpu *gpu)
+{
+ struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+ const u32 *regs = a6xx_protect;
+ unsigned i, count = ARRAY_SIZE(a6xx_protect), count_max = 32;
+
+ BUILD_BUG_ON(ARRAY_SIZE(a6xx_protect) > 32);
+ BUILD_BUG_ON(ARRAY_SIZE(a650_protect) > 48);
+
+ if (adreno_is_a650(adreno_gpu)) {
+ regs = a650_protect;
+ count = ARRAY_SIZE(a650_protect);
+ count_max = 48;
+ }
+
+ /*
+ * Enable access protection to privileged registers, fault on an access
+ * protect violation and select the last span to protect from the start
+ * address all the way to the end of the register address space
+ */
+ gpu_write(gpu, REG_A6XX_CP_PROTECT_CNTL, BIT(0) | BIT(1) | BIT(3));
+
+ for (i = 0; i < count - 1; i++)
+ gpu_write(gpu, REG_A6XX_CP_PROTECT(i), regs[i]);
+ /* last CP_PROTECT to have "infinite" length on the last entry */
+ gpu_write(gpu, REG_A6XX_CP_PROTECT(count_max - 1), regs[i]);
+}
+
static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
@@ -776,41 +883,7 @@ static int a6xx_hw_init(struct msm_gpu *
}
/* Protect registers from the CP */
- gpu_write(gpu, REG_A6XX_CP_PROTECT_CNTL, 0x00000003);
-
- gpu_write(gpu, REG_A6XX_CP_PROTECT(0),
- A6XX_PROTECT_RDONLY(0x600, 0x51));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(1), A6XX_PROTECT_RW(0xae50, 0x2));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(2), A6XX_PROTECT_RW(0x9624, 0x13));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(3), A6XX_PROTECT_RW(0x8630, 0x8));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(4), A6XX_PROTECT_RW(0x9e70, 0x1));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(5), A6XX_PROTECT_RW(0x9e78, 0x187));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(6), A6XX_PROTECT_RW(0xf000, 0x810));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(7),
- A6XX_PROTECT_RDONLY(0xfc00, 0x3));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(8), A6XX_PROTECT_RW(0x50e, 0x0));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(9), A6XX_PROTECT_RDONLY(0x50f, 0x0));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(10), A6XX_PROTECT_RW(0x510, 0x0));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(11),
- A6XX_PROTECT_RDONLY(0x0, 0x4f9));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(12),
- A6XX_PROTECT_RDONLY(0x501, 0xa));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(13),
- A6XX_PROTECT_RDONLY(0x511, 0x44));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(14), A6XX_PROTECT_RW(0xe00, 0xe));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(15), A6XX_PROTECT_RW(0x8e00, 0x0));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(16), A6XX_PROTECT_RW(0x8e50, 0xf));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(17), A6XX_PROTECT_RW(0xbe02, 0x0));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(18),
- A6XX_PROTECT_RW(0xbe20, 0x11f3));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(19), A6XX_PROTECT_RW(0x800, 0x82));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(20), A6XX_PROTECT_RW(0x8a0, 0x8));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(21), A6XX_PROTECT_RW(0x8ab, 0x19));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(22), A6XX_PROTECT_RW(0x900, 0x4d));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(23), A6XX_PROTECT_RW(0x98d, 0x76));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(24),
- A6XX_PROTECT_RDONLY(0x980, 0x4));
- gpu_write(gpu, REG_A6XX_CP_PROTECT(25), A6XX_PROTECT_RW(0xa630, 0x0));
+ a6xx_set_cp_protect(gpu);
/* Enable expanded apriv for targets that support it */
if (gpu->hw_apriv) {
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
@@ -44,7 +44,7 @@ struct a6xx_gpu {
* REG_CP_PROTECT_REG(n) - this will block both reads and writes for _len
* registers starting at _reg.
*/
-#define A6XX_PROTECT_RW(_reg, _len) \
+#define A6XX_PROTECT_NORDWR(_reg, _len) \
((1 << 31) | \
(((_len) & 0x3FFF) << 18) | ((_reg) & 0x3FFFF))
From: Li Jun <[email protected]>
commit 7ade4805e296c8d1e40c842395bbe478c7210555 upstream.
Like the state_machine_timer, we should also cancel possible pending
frs hrtimer when unregister tcpm port.
Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Cc: stable <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Li Jun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -6228,6 +6228,7 @@ void tcpm_unregister_port(struct tcpm_po
{
int i;
+ hrtimer_cancel(&port->enable_frs_timer);
hrtimer_cancel(&port->vdm_state_machine_timer);
hrtimer_cancel(&port->state_machine_timer);
From: Li Jun <[email protected]>
commit 3a13ff7ef4349d70d1d18378d661117dd5af8efe upstream.
A pending hrtimer may expire after the kthread_worker of tcpm port
is destroyed, see below kernel dump when do module unload, fix it
by cancel the 2 hrtimers.
[ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880
[ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 111.526594] Mem abort info:
[ 111.526597] ESR = 0x96000047
[ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits
[ 111.526604] SET = 0, FnV = 0
[ 111.526607] EA = 0, S1PTW = 0
[ 111.526610] Data abort info:
[ 111.526612] ISV = 0, ISS = 0x00000047
[ 111.526615] CM = 0, WnR = 1
[ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000
[ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000
[ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci]
[ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36
[ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--)
[ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390
[ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4
[ 111.526703] sp : ffff800010003e20
[ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180
[ 111.537156] buffer_io_error: 6 callbacks suppressed
[ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read
[ 111.539932] x27: ffff00017f3801c0
[ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001
[ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[ 111.548304]
[ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180
[ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read
[ 111.554499]
[ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000
[ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read
[ 111.561218]
[ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read
[ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040
[ 111.570902] x11: ffff0000c05ac6d8
[ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read
[ 111.588978] x10: 0000000000000000 x9 : 0000000000040000
[ 111.588988] x8 : 0000000000000000
[ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read
[ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880
[ 111.605777] x5 : ffff00017f384880
[ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read
[ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184
[ 111.617096] x2 : ffff8000118cb880
[ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read
[ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888
[ 111.626938] Call trace:
[ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390
[ 111.795809] kthread_queue_work+0x30/0xc0
[ 111.799828] state_machine_timer_handler+0x20/0x30
[ 111.804624] __hrtimer_run_queues+0x140/0x1e0
[ 111.808990] hrtimer_interrupt+0xec/0x2c0
[ 111.813004] arch_timer_handler_phys+0x38/0x50
[ 111.817456] handle_percpu_devid_irq+0x88/0x150
[ 111.821991] __handle_domain_irq+0x80/0xe0
[ 111.826093] gic_handle_irq+0xc0/0x140
[ 111.829848] el1_irq+0xbc/0x154
[ 111.832991] arch_cpu_idle+0x1c/0x2c
[ 111.836572] default_idle_call+0x24/0x6c
[ 111.840497] do_idle+0x238/0x2ac
[ 111.843729] cpu_startup_entry+0x2c/0x70
[ 111.847657] rest_init+0xdc/0xec
[ 111.850890] arch_call_rest_init+0x14/0x20
[ 111.854988] start_kernel+0x508/0x540
[ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827)
[ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]---
[ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 111.876258] SMP: stopping secondary CPUs
[ 111.880185] Kernel Offset: disabled
[ 111.883673] CPU features: 0x00001001,20000846
[ 111.888031] Memory Limit: none
[ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events")
Cc: stable <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Li Jun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -6228,6 +6228,9 @@ void tcpm_unregister_port(struct tcpm_po
{
int i;
+ hrtimer_cancel(&port->vdm_state_machine_timer);
+ hrtimer_cancel(&port->state_machine_timer);
+
tcpm_reset_port(port);
for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++)
typec_unregister_altmode(port->port_altmode[i]);
From: Alexandre GRIVEAUX <[email protected]>
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/omninet.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -26,6 +26,7 @@
#define ZYXEL_VENDOR_ID 0x0586
#define ZYXEL_OMNINET_ID 0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID 0x1500
/* This one seems to be a re-branded ZyXEL device */
#define BT_IGNITIONPRO_ID 0x2000
@@ -40,6 +41,7 @@ static void omninet_port_remove(struct u
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+ { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
{ } /* Terminating entry */
};
From: Axel Lin <[email protected]>
commit 36cb555fae0875d5416e8514a84a427bec6e4cda upstream.
For linear regulators, the .n_voltages is (max_uv - min_uv) / uv_step + 1.
Fixes: 0fbeae70ee7c ("regulator: add SCMI driver")
Signed-off-by: Axel Lin <[email protected]>
Reviewed-by: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/scmi-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/regulator/scmi-regulator.c
+++ b/drivers/regulator/scmi-regulator.c
@@ -176,7 +176,7 @@ scmi_config_linear_regulator_mappings(st
sreg->desc.uV_step =
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_STEP];
sreg->desc.linear_min_sel = 0;
- sreg->desc.n_voltages = delta_uV / sreg->desc.uV_step;
+ sreg->desc.n_voltages = (delta_uV / sreg->desc.uV_step) + 1;
sreg->desc.ops = &scmi_reg_linear_ops;
}
From: Andy Shevchenko <[email protected]>
commit 1a85b350a7741776a406005b943e3dec02c424ed upstream.
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -636,8 +636,10 @@ static int pmc_usb_probe(struct platform
break;
ret = pmc_usb_register_port(pmc, i, fwnode);
- if (ret)
+ if (ret) {
+ fwnode_handle_put(fwnode);
goto err_remove_ports;
+ }
}
platform_set_drvdata(pdev, pmc);
From: Axel Lin <[email protected]>
commit 0b1e552673724832b08d49037cdeeac634a3b319 upstream.
-EINVAL is not a valid return value for .of_map_mode, return
REGULATOR_MODE_INVALID instead.
Fixes: 65ac97042d4e ("regulator: da9121: add mode support")
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Adam Ward <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/da9121-regulator.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/regulator/da9121-regulator.c
+++ b/drivers/regulator/da9121-regulator.c
@@ -280,7 +280,7 @@ static unsigned int da9121_map_mode(unsi
case DA9121_BUCK_MODE_FORCE_PFM:
return REGULATOR_MODE_STANDBY;
default:
- return -EINVAL;
+ return REGULATOR_MODE_INVALID;
}
}
@@ -317,7 +317,7 @@ static unsigned int da9121_buck_get_mode
{
struct da9121 *chip = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
- unsigned int val;
+ unsigned int val, mode;
int ret = 0;
ret = regmap_read(chip->regmap, da9121_mode_field[id].reg, &val);
@@ -326,7 +326,11 @@ static unsigned int da9121_buck_get_mode
return -EINVAL;
}
- return da9121_map_mode(val & da9121_mode_field[id].msk);
+ mode = da9121_map_mode(val & da9121_mode_field[id].msk);
+ if (mode == REGULATOR_MODE_INVALID)
+ return -EINVAL;
+
+ return mode;
}
static const struct regulator_ops da9121_buck_ops = {
From: Axel Lin <[email protected]>
commit 855bfff9d623e7aff6556bfb6831d324dec8d96a upstream.
dev_pm_genpd_set_performance_state() may fail, so had better to check it's
return value before decreasing priv->enable_counter.
Fixes: bf3a28cf4241 ("regulator: fixed: support using power domain for enable/disable")
Signed-off-by: Axel Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/regulator/fixed.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -88,10 +88,15 @@ static int reg_domain_disable(struct reg
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
struct device *dev = rdev->dev.parent;
+ int ret;
+
+ ret = dev_pm_genpd_set_performance_state(dev, 0);
+ if (ret)
+ return ret;
priv->enable_counter--;
- return dev_pm_genpd_set_performance_state(dev, 0);
+ return 0;
}
static int reg_is_enabled(struct regulator_dev *rdev)
From: Chen Li <[email protected]>
commit 7c2fc79250cafa1a29befeb60163028ec4720814 upstream.
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not
for other symbols such as __BIG_ENDIAN that is provided directly by
the compiler.
Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN.
Signed-off-by: Chen Li <[email protected]>
Reviewed-by: Al Cooper <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Fixes: 94583a41047e ("phy: usb: Restructure in preparation for adding 7216 USB support")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/broadcom/phy-brcm-usb-init.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -78,7 +78,7 @@ static inline u32 brcm_usb_readl(void __
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
@@ -87,7 +87,7 @@ static inline u32 brcm_usb_readl(void __
static inline void brcm_usb_writel(u32 val, void __iomem *addr)
{
/* See brcmnand_readl() comments */
- if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
From: Kyle Tso <[email protected]>
commit 5ab14ab1f2db24ffae6c5c39a689660486962e6e upstream.
If the VDM responses couldn't be sent successfully, it doesn't need to
finish the AMS until the retry count reaches the limit.
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
Reviewed-by: Guenter Roeck <[email protected]>
Cc: stable <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1917,6 +1917,9 @@ static void vdm_run_state_machine(struct
tcpm_log(port, "VDM Tx error, retry");
port->vdm_retries++;
port->vdm_state = VDM_STATE_READY;
+ if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMDT(vdo_hdr) == CMDT_INIT)
+ tcpm_ams_finish(port);
+ } else {
tcpm_ams_finish(port);
}
break;
From: Linyu Yuan <[email protected]>
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <[email protected]>
Signed-off-by: Linyu Yuan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_eem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -495,7 +495,7 @@ static int eem_unwrap(struct gether *por
skb2 = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!skb2)) {
DBG(cdev, "unable to unframe EEM packet\n");
- continue;
+ goto next;
}
skb_trim(skb2, len - ETH_FCS_LEN);
@@ -505,7 +505,7 @@ static int eem_unwrap(struct gether *por
GFP_ATOMIC);
if (unlikely(!skb3)) {
dev_kfree_skb_any(skb2);
- continue;
+ goto next;
}
dev_kfree_skb_any(skb2);
skb_queue_tail(list, skb3);
From: Wesley Cheng <[email protected]>
commit 8212937305f84ef73ea81036dafb80c557583d4b upstream.
Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events. Endpoint events can still be generated. Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)
Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.
Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2240,13 +2240,10 @@ static int dwc3_gadget_pullup(struct usb
}
/*
- * Synchronize any pending event handling before executing the controller
- * halt routine.
+ * Synchronize and disable any further event handling while controller
+ * is being enabled/disabled.
*/
- if (!is_on) {
- dwc3_gadget_disable_irq(dwc);
- synchronize_irq(dwc->irq_gadget);
- }
+ disable_irq(dwc->irq_gadget);
spin_lock_irqsave(&dwc->lock, flags);
@@ -2284,6 +2281,8 @@ static int dwc3_gadget_pullup(struct usb
ret = dwc3_gadget_run_stop(dwc, is_on, false);
spin_unlock_irqrestore(&dwc->lock, flags);
+ enable_irq(dwc->irq_gadget);
+
pm_runtime_put(dwc->dev);
return ret;
From: Jerome Brunet <[email protected]>
commit d031d99b02eaf7363c33f5b27b38086cc8104082 upstream.
There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.
Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long
The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.
Fixes: fd00366b8e41 ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -57,7 +57,7 @@ patternProperties:
rate
sound-dai:
- $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: phandle of the CPU DAI
patternProperties:
@@ -71,7 +71,7 @@ patternProperties:
properties:
sound-dai:
- $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: phandle of the codec DAI
required:
From: Bjorn Andersson <[email protected]>
commit 142d0b24c1b17139f1aaaacae7542a38aa85640f upstream.
Fix the copy-paste mistake in the return path of typec_mux_match(),
where dev is considered a member of struct typec_switch rather than
struct typec_mux.
The two structs are identical in regards to having the struct device as
the first entry, so this provides no functional change.
Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/mux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -239,7 +239,7 @@ find_mux:
dev = class_find_device(&typec_mux_class, NULL, fwnode,
mux_fwnode_match);
- return dev ? to_typec_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+ return dev ? to_typec_mux(dev) : ERR_PTR(-EPROBE_DEFER);
}
/**
From: Jonathan Marek <[email protected]>
commit b4387eaf3821a4c4241ac3a556e13244eb1fdaa5 upstream.
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd66 ("drm/msm/a6xx: set ubwc config for A640 and A650")
Signed-off-by: Jonathan Marek <[email protected]>
Reviewed-by: Akhil P Oommen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -489,7 +489,7 @@ static void a6xx_set_ubwc_config(struct
rgb565_predicator << 11 | amsbc << 4 | lower_bit << 1);
gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, lower_bit << 1);
gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL,
- uavflagprd_inv >> 4 | lower_bit << 1);
+ uavflagprd_inv << 4 | lower_bit << 1);
gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, lower_bit << 21);
}
From: Pawel Laszczak <[email protected]>
commit a9aecef198faae3240921b707bc09b602e966fce upstream.
Patch fixes the following critical issue caused by deadlock which has been
detected during testing NCM class:
smp: csd: Detected non-responsive CSD lock (#1) on CPU#0
smp: csd: CSD lock (#1) unresponsive.
....
RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0
RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002
RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658
RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658
R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0
Call Trace:
<IRQ>
do_raw_spin_lock+0xc0/0xd0
_raw_spin_lock_irqsave+0x95/0xa0
cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci]
usb_ep_queue+0x35/0x110
eth_start_xmit+0x220/0x3d0 [u_ether]
ncm_tx_timeout+0x34/0x40 [usb_f_ncm]
? ncm_free_inst+0x50/0x50 [usb_f_ncm]
__hrtimer_run_queues+0xac/0x440
hrtimer_run_softirq+0x8c/0xb0
__do_softirq+0xcf/0x428
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x61/0x70
irq_exit_rcu+0xc1/0xd0
sysvec_apic_timer_interrupt+0x52/0xb0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:do_raw_spin_trylock+0x18/0x40
RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658
RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658
R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000
_raw_spin_lock+0x3d/0x70
? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci]
cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci]
? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci]
? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci]
? irq_thread+0xa0/0x1c0
irq_thread_fn+0x28/0x60
irq_thread+0x105/0x1c0
? __kthread_parkme+0x42/0x90
? irq_forced_thread_fn+0x90/0x90
? wake_threads_waitq+0x30/0x30
? irq_thread_check_affinity+0xe0/0xe0
kthread+0x12a/0x160
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
The root cause of issue is spin_lock/spin_unlock instruction instead
spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler
function.
Cc: [email protected]
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/cdns3/cdnsp-ring.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/cdns3/cdnsp-ring.c
+++ b/drivers/usb/cdns3/cdnsp-ring.c
@@ -1517,13 +1517,14 @@ irqreturn_t cdnsp_thread_irq_handler(int
{
struct cdnsp_device *pdev = (struct cdnsp_device *)data;
union cdnsp_trb *event_ring_deq;
+ unsigned long flags;
int counter = 0;
- spin_lock(&pdev->lock);
+ spin_lock_irqsave(&pdev->lock, flags);
if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) {
cdnsp_died(pdev);
- spin_unlock(&pdev->lock);
+ spin_unlock_irqrestore(&pdev->lock, flags);
return IRQ_HANDLED;
}
@@ -1539,7 +1540,7 @@ irqreturn_t cdnsp_thread_irq_handler(int
cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1);
- spin_unlock(&pdev->lock);
+ spin_unlock_irqrestore(&pdev->lock, flags);
return IRQ_HANDLED;
}
From: Robert Marko <[email protected]>
commit fb8543fb863e89baa433b4d716d73395caa1b7f4 upstream.
Define the max register address the device supports.
This allows reading the whole register space via
regmap debugfs, without it only register 0x0 is visible.
This was forgotten in the original driver commit.
Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Robert Marko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/tps23861.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/hwmon/tps23861.c
+++ b/drivers/hwmon/tps23861.c
@@ -117,6 +117,7 @@ struct tps23861_data {
static struct regmap_config tps23861_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
+ .max_register = 0x6f,
};
static int tps23861_read_temp(struct tps23861_data *data, long *val)
From: Wang Wensheng <[email protected]>
commit 6411e386db0a477217607015e7d2910d02f75426 upstream.
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: a43f72ae136a ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Wensheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/cadence/phy-cadence-sierra.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -612,6 +612,7 @@ static int cdns_sierra_phy_probe(struct
sp->nsubnodes = node;
if (sp->num_lanes > SIERRA_MAX_LANES) {
+ ret = -EINVAL;
dev_err(dev, "Invalid lane configuration\n");
goto put_child2;
}
From: Zhen Lei <[email protected]>
commit e8ba0b2b64126381643bb50df3556b139a60545a upstream.
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a995e6bc0524 ("tools/bootconfig: Fix to check the write failure correctly")
Reported-by: Hulk Robot <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bootconfig/main.c | 1 +
1 file changed, 1 insertion(+)
--- a/tools/bootconfig/main.c
+++ b/tools/bootconfig/main.c
@@ -399,6 +399,7 @@ static int apply_xbc(const char *path, c
}
/* TODO: Ensure the @path is initramfs/initrd image */
if (fstat(fd, &stat) < 0) {
+ ret = -errno;
pr_err("Failed to get the size of %s\n", path);
goto out;
}
From: Kefeng Wang <[email protected]>
commit 41daf6ba594d55f201c50280ebcd430590441da1 upstream.
Check the return value of devm_kstrdup() in case of
Null-point-dereference.
Fixes: 45dd9943fce0 ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <[email protected]>
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2223,6 +2223,8 @@ static char *fmt_single_name(struct devi
return NULL;
name = devm_kstrdup(dev, devname, GFP_KERNEL);
+ if (!name)
+ return NULL;
/* are we a "%s.%d" name (platform and SPI components) */
found = strstr(name, dev->driver->name);
From: Yang Li <[email protected]>
commit b8203ec7f58ae925e10fadd3d136073ae7503a6e upstream.
When the code execute this if statement, the value of ret is 0.
However, we can see from the dev_err() log that the value of
ret should be -EINVAL.
Clean up smatch warning:
drivers/phy/ti/phy-j721e-wiz.c:1216 wiz_probe() warn: missing error code 'ret'
Reported-by: Abaci Robot <[email protected]>
Fixes: c9f9eba06629 ("phy: ti: j721e-wiz: Manage typec-gpio-dir")
Signed-off-by: Yang Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/ti/phy-j721e-wiz.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -894,6 +894,7 @@ static int wiz_probe(struct platform_dev
if (wiz->typec_dir_delay < WIZ_TYPEC_DIR_DEBOUNCE_MIN ||
wiz->typec_dir_delay > WIZ_TYPEC_DIR_DEBOUNCE_MAX) {
+ ret = -EINVAL;
dev_err(dev, "Invalid typec-dir-debounce property\n");
goto err_addr_to_resource;
}
From: Manivannan Sadhasivam <[email protected]>
commit 0e4bf265b11a00bde9fef6b791bd8ee2d8059701 upstream.
"gpio52" and "gpio53" are duplicated in gpio_groups, fix them!
Fixes: ac43c44a7a37 ("pinctrl: qcom: Add SDX55 pincontrol driver")
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-sdx55.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-sdx55.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdx55.c
@@ -410,15 +410,15 @@ static const char * const gpio_groups[]
"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
- "gpio50", "gpio51", "gpio52", "gpio52", "gpio53", "gpio53", "gpio54",
- "gpio55", "gpio56", "gpio57", "gpio58", "gpio59", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68",
- "gpio69", "gpio70", "gpio71", "gpio72", "gpio73", "gpio74", "gpio75",
- "gpio76", "gpio77", "gpio78", "gpio79", "gpio80", "gpio81", "gpio82",
- "gpio83", "gpio84", "gpio85", "gpio86", "gpio87", "gpio88", "gpio89",
- "gpio90", "gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96",
- "gpio97", "gpio98", "gpio99", "gpio100", "gpio101", "gpio102",
- "gpio103", "gpio104", "gpio105", "gpio106", "gpio107",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107",
};
static const char * const qdss_stm_groups[] = {
From: Johan Hovold <[email protected]>
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: [email protected] # 3.5
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/quatech2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 1,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_
/* flush the port receive buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 0,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -654,7 +654,7 @@ static int qt2_attach(struct usb_serial
int status;
/* power on unit */
- status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0xc2, 0x40, 0x8000, 0, NULL, 0,
QT2_USB_TIMEOUT);
if (status < 0) {
From: Stefan Agner <[email protected]>
commit 6f7ec77cc8b64ff5037c1945e4650c65c458037d upstream.
The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.
Special case QFN20 to follow to properly detect which GPIOs are
available.
Signed-off-by: Stefan Agner <[email protected]>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: [email protected] # 4.19
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -537,6 +537,12 @@ struct cp210x_single_port_config {
#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587
#define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6)
+
/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
struct cp210x_gpio_write {
u8 mask;
@@ -1726,7 +1732,19 @@ static int cp2102n_gpioconf_init(struct
priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
/* 0 indicates GPIO mode, 1 is alternate function */
- priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+ if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+ /* QFN20 is special... */
+ if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */
+ priv->gpio_altfunc |= BIT(0);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+ priv->gpio_altfunc |= BIT(1);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+ priv->gpio_altfunc |= BIT(2);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+ priv->gpio_altfunc |= BIT(3);
+ } else {
+ priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+ }
if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
/*
From: Johan Hovold <[email protected]>
commit 63a8eef70ccb5199534dec56fed9759d214bfe55 upstream.
CP2102N revision A01 (firmware version <= 1.0.4) has a buggy
flow-control implementation that uses the ulXonLimit instead of
ulFlowReplace field of the flow-control settings structure (erratum
CP2102N_E104).
A recent change that set the input software flow-control limits
incidentally broke RTS control for these devices when CRTSCTS is not set
as the new limits would always enable hardware flow control.
Fix this by explicitly disabling flow control for the buggy firmware
versions and only updating the input software flow-control limits when
IXOFF is requested. This makes sure that the terminal settings matches
the default zero ulXonLimit (ulFlowReplace) for these devices.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: David Frey <[email protected]>
Reported-by: Alex Villacís Lasso <[email protected]>
Tested-by: Alex Villacís Lasso <[email protected]>
Fixes: f61309d9c96a ("USB: serial: cp210x: set IXOFF thresholds")
Cc: [email protected] # 5.12
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 64 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 59 insertions(+), 5 deletions(-)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -252,9 +252,11 @@ struct cp210x_serial_private {
u8 gpio_input;
#endif
u8 partnum;
+ u32 fw_version;
speed_t min_speed;
speed_t max_speed;
bool use_actual_rate;
+ bool no_flow_control;
};
enum cp210x_event_state {
@@ -398,6 +400,7 @@ struct cp210x_special_chars {
/* CP210X_VENDOR_SPECIFIC values */
#define CP210X_READ_2NCONFIG 0x000E
+#define CP210X_GET_FW_VER_2N 0x0010
#define CP210X_READ_LATCH 0x00C2
#define CP210X_GET_PARTNUM 0x370B
#define CP210X_GET_PORTCONFIG 0x370C
@@ -1128,6 +1131,7 @@ static bool cp210x_termios_change(const
static void cp210x_set_flow_control(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
+ struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
struct cp210x_special_chars chars;
struct cp210x_flow_ctl flow_ctl;
@@ -1135,6 +1139,15 @@ static void cp210x_set_flow_control(stru
u32 ctl_hs;
int ret;
+ /*
+ * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum
+ * CP2102N_E104). Report back that flow control is not supported.
+ */
+ if (priv->no_flow_control) {
+ tty->termios.c_cflag &= ~CRTSCTS;
+ tty->termios.c_iflag &= ~(IXON | IXOFF);
+ }
+
if (old_termios &&
C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
I_IXON(tty) == (old_termios->c_iflag & IXON) &&
@@ -1191,19 +1204,20 @@ static void cp210x_set_flow_control(stru
port_priv->crtscts = false;
}
- if (I_IXOFF(tty))
+ if (I_IXOFF(tty)) {
flow_repl |= CP210X_SERIAL_AUTO_RECEIVE;
- else
+
+ flow_ctl.ulXonLimit = cpu_to_le32(128);
+ flow_ctl.ulXoffLimit = cpu_to_le32(128);
+ } else {
flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE;
+ }
if (I_IXON(tty))
flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT;
else
flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT;
- flow_ctl.ulXonLimit = cpu_to_le32(128);
- flow_ctl.ulXoffLimit = cpu_to_le32(128);
-
dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__,
ctl_hs, flow_repl);
@@ -1919,6 +1933,45 @@ static void cp210x_init_max_speed(struct
priv->use_actual_rate = use_actual_rate;
}
+static int cp210x_get_fw_version(struct usb_serial *serial, u16 value)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ u8 ver[3];
+ int ret;
+
+ ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value,
+ ver, sizeof(ver));
+ if (ret)
+ return ret;
+
+ dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__,
+ ver[0], ver[1], ver[2]);
+
+ priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2];
+
+ return 0;
+}
+
+static void cp210x_determine_quirks(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ int ret;
+
+ switch (priv->partnum) {
+ case CP210X_PARTNUM_CP2102N_QFN28:
+ case CP210X_PARTNUM_CP2102N_QFN24:
+ case CP210X_PARTNUM_CP2102N_QFN20:
+ ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N);
+ if (ret)
+ break;
+ if (priv->fw_version <= 0x10004)
+ priv->no_flow_control = true;
+ break;
+ default:
+ break;
+ }
+}
+
static int cp210x_attach(struct usb_serial *serial)
{
int result;
@@ -1939,6 +1992,7 @@ static int cp210x_attach(struct usb_seri
usb_set_serial_data(serial, priv);
+ cp210x_determine_quirks(serial);
cp210x_init_max_speed(serial);
result = cp210x_gpio_init(serial);
From: Vincent Guittot <[email protected]>
commit 02da26ad5ed6ea8680e5d01f20661439611ed776 upstream.
During the update of fair blocked load (__update_blocked_fair()), we
update the contribution of the cfs in tg->load_avg if cfs_rq's pelt
has decayed. Nevertheless, the pelt values of a cfs_rq could have
been recently updated while propagating the change of a child. In this
case, cfs_rq's pelt will not decayed because it has already been
updated and we don't update tg->load_avg.
__update_blocked_fair
...
for_each_leaf_cfs_rq_safe: child cfs_rq
update cfs_rq_load_avg() for child cfs_rq
...
update_load_avg(cfs_rq_of(se), se, 0)
...
update cfs_rq_load_avg() for parent cfs_rq
-propagation of child's load makes parent cfs_rq->load_sum
becoming null
-UPDATE_TG is not set so it doesn't update parent
cfs_rq->tg_load_avg_contrib
..
for_each_leaf_cfs_rq_safe: parent cfs_rq
update cfs_rq_load_avg() for parent cfs_rq
- nothing to do because parent cfs_rq has already been updated
recently so cfs_rq->tg_load_avg_contrib is not updated
...
parent cfs_rq is decayed
list_del_leaf_cfs_rq parent cfs_rq
- but it still contibutes to tg->load_avg
we must set UPDATE_TG flags when propagting pending load to the parent
Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Reported-by: Odin Ugedal <[email protected]>
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Odin Ugedal <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/fair.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -8005,7 +8005,7 @@ static bool __update_blocked_fair(struct
/* Propagate pending load changes to the parent, if any: */
se = cfs_rq->tg->se[cpu];
if (se && !skip_blocked_update(se))
- update_load_avg(cfs_rq_of(se), se, 0);
+ update_load_avg(cfs_rq_of(se), se, UPDATE_TG);
/*
* There can be a lot of idle CPU cgroups. Don't let fully
From: Kyle Tso <[email protected]>
commit 9257bd80b917cc7908abd27ed5a5211964563f62 upstream.
BIT macro is not defined. Replace it with generic bit operations.
Fixes: 630dce2810b9 ("dt-bindings: connector: Add SVDM VDO properties")
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Kyle Tso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/dt-bindings/usb/pd.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/include/dt-bindings/usb/pd.h
+++ b/include/dt-bindings/usb/pd.h
@@ -163,10 +163,10 @@
#define UFP_VDO_VER1_2 2
/* Device Capability */
-#define DEV_USB2_CAPABLE BIT(0)
-#define DEV_USB2_BILLBOARD BIT(1)
-#define DEV_USB3_CAPABLE BIT(2)
-#define DEV_USB4_CAPABLE BIT(3)
+#define DEV_USB2_CAPABLE (1 << 0)
+#define DEV_USB2_BILLBOARD (1 << 1)
+#define DEV_USB3_CAPABLE (1 << 2)
+#define DEV_USB4_CAPABLE (1 << 3)
/* Connector Type */
#define UFP_RECEPTACLE 2
@@ -191,9 +191,9 @@
/* Alternate Modes */
#define UFP_ALTMODE_NOT_SUPP 0
-#define UFP_ALTMODE_TBT3 BIT(0)
-#define UFP_ALTMODE_RECFG BIT(1)
-#define UFP_ALTMODE_NO_RECFG BIT(2)
+#define UFP_ALTMODE_TBT3 (1 << 0)
+#define UFP_ALTMODE_RECFG (1 << 1)
+#define UFP_ALTMODE_NO_RECFG (1 << 2)
/* USB Highest Speed */
#define UFP_USB2_ONLY 0
@@ -217,9 +217,9 @@
* <4:0> :: Port number
*/
#define DFP_VDO_VER1_1 1
-#define HOST_USB2_CAPABLE BIT(0)
-#define HOST_USB3_CAPABLE BIT(1)
-#define HOST_USB4_CAPABLE BIT(2)
+#define HOST_USB2_CAPABLE (1 << 0)
+#define HOST_USB3_CAPABLE (1 << 1)
+#define HOST_USB4_CAPABLE (1 << 2)
#define DFP_RECEPTACLE 2
#define DFP_CAPTIVE 3
From: Robert Marko <[email protected]>
commit b325d3526e14942d42c392c2ac9fbea59c22894c upstream.
TPS23861 has a configuration bit for setting of the
current shunt value used on the board.
Its bit 0 of the General Mask 1 register.
According to the datasheet bit values are:
0 for 255 mOhm (Default)
1 for 250 mOhm
So, configure the bit before registering the hwmon
device according to the value passed in the DTS or
default one if none is passed.
This caused potentially reading slightly skewed values
due to max current value being 1.02A when 250mOhm shunt
is used instead of 1.0A when 255mOhm is used.
Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Robert Marko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/tps23861.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/hwmon/tps23861.c
+++ b/drivers/hwmon/tps23861.c
@@ -99,6 +99,9 @@
#define POWER_ENABLE 0x19
#define TPS23861_NUM_PORTS 4
+#define TPS23861_GENERAL_MASK_1 0x17
+#define TPS23861_CURRENT_SHUNT_MASK BIT(0)
+
#define TEMPERATURE_LSB 652 /* 0.652 degrees Celsius */
#define VOLTAGE_LSB 3662 /* 3.662 mV */
#define SHUNT_RESISTOR_DEFAULT 255000 /* 255 mOhm */
@@ -561,6 +564,15 @@ static int tps23861_probe(struct i2c_cli
else
data->shunt_resistor = SHUNT_RESISTOR_DEFAULT;
+ if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
+ regmap_clear_bits(data->regmap,
+ TPS23861_GENERAL_MASK_1,
+ TPS23861_CURRENT_SHUNT_MASK);
+ else
+ regmap_set_bits(data->regmap,
+ TPS23861_GENERAL_MASK_1,
+ TPS23861_CURRENT_SHUNT_MASK);
+
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data, &tps23861_chip_info,
NULL);
From: Kan Liang <[email protected]>
commit 4a0e3ff30980b7601b13dd3b7ee275212b852843 upstream.
A kernel WARNING may be triggered when setting maxcpus=1.
The uncore counters are Die-scope. When probing a PCI device, only the
BUS information can be retrieved. The uncore driver has to maintain a
mapping table used to calculate the logical Die ID from a given BUS#.
Before the patch ba9506be4e40, the mapping table stores the mapping
information from the BUS# -> a Physical Socket ID. To calculate the
logical die ID, perf does,
- In snbep_pci2phy_map_init(), retrieve the BUS# -> a Physical Socket ID
from the UBOX PCI configure space.
- Calculate the mapping information (a BUS# -> a Physical Socket ID) for
the other PCI BUS.
- In the uncore_pci_probe(), get the physical Socket ID from a given BUS
and the mapping table.
- Calculate the logical Die ID
Since only the logical Die ID is required, with the patch ba9506be4e40,
the mapping table stores the mapping information from the BUS# -> a
logical Die ID. Now perf does,
- In snbep_pci2phy_map_init(), retrieve the BUS# -> a Physical Socket ID
from the UBOX PCI configure space.
- Calculate the logical Die ID
- Calculate the mapping information (a BUS# -> a logical Die ID) for the
other PCI BUS.
- In the uncore_pci_probe(), get the logical die ID from a given BUS and
the mapping table.
When calculating the logical Die ID, -1 may be returned, especially when
maxcpus=1. Here, -1 means the logical Die ID is not found. But when
calculating the mapping information for the other PCI BUS, -1 indicates
that it's the other PCI BUS that requires the calculation of the
mapping. The driver will mistakenly do the calculation.
Uses the -ENODEV to indicate the case which the logical Die ID is not
found. The driver will not mess up the mapping table anymore.
Fixes: ba9506be4e40 ("perf/x86/intel/uncore: Store the logical die id instead of the physical die id.")
Reported-by: John Donnelly <[email protected]>
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: John Donnelly <[email protected]>
Tested-by: John Donnelly <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -1406,6 +1406,8 @@ static int snbep_pci2phy_map_init(int de
die_id = i;
else
die_id = topology_phys_to_logical_pkg(i);
+ if (die_id < 0)
+ die_id = -ENODEV;
map->pbus_to_dieid[bus] = die_id;
break;
}
@@ -1452,14 +1454,14 @@ static int snbep_pci2phy_map_init(int de
i = -1;
if (reverse) {
for (bus = 255; bus >= 0; bus--) {
- if (map->pbus_to_dieid[bus] >= 0)
+ if (map->pbus_to_dieid[bus] != -1)
i = map->pbus_to_dieid[bus];
else
map->pbus_to_dieid[bus] = i;
}
} else {
for (bus = 0; bus <= 255; bus++) {
- if (map->pbus_to_dieid[bus] >= 0)
+ if (map->pbus_to_dieid[bus] != -1)
i = map->pbus_to_dieid[bus];
else
map->pbus_to_dieid[bus] = i;
From: Dietmar Eggemann <[email protected]>
commit 68d7a190682aa4eb02db477328088ebad15acc83 upstream.
The util_est internal UTIL_AVG_UNCHANGED flag which is used to prevent
unnecessary util_est updates uses the LSB of util_est.enqueued. It is
exposed via _task_util_est() (and task_util_est()).
Commit 92a801e5d5b7 ("sched/fair: Mask UTIL_AVG_UNCHANGED usages")
mentions that the LSB is lost for util_est resolution but
find_energy_efficient_cpu() checks if task_util_est() returns 0 to
return prev_cpu early.
_task_util_est() returns the max value of util_est.ewma and
util_est.enqueued or'ed w/ UTIL_AVG_UNCHANGED.
So task_util_est() returning the max of task_util() and
_task_util_est() will never return 0 under the default
SCHED_FEAT(UTIL_EST, true).
To fix this use the MSB of util_est.enqueued instead and keep the flag
util_est internal, i.e. don't export it via _task_util_est().
The maximal possible util_avg value for a task is 1024 so the MSB of
'unsigned int util_est.enqueued' isn't used to store a util value.
As a caveat the code behind the util_est_se trace point has to filter
UTIL_AVG_UNCHANGED to see the real util_est.enqueued value which should
be easy to do.
This also fixes an issue report by Xuewen Yan that util_est_update()
only used UTIL_AVG_UNCHANGED for the subtrahend of the equation:
last_enqueued_diff = ue.enqueued - (task_util() | UTIL_AVG_UNCHANGED)
Fixes: b89997aa88f0b sched/pelt: Fix task util_est update filtering
Signed-off-by: Dietmar Eggemann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Xuewen Yan <[email protected]>
Reviewed-by: Vincent Donnefort <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/sched.h | 8 ++++++++
kernel/sched/debug.c | 3 ++-
kernel/sched/fair.c | 5 +++--
kernel/sched/pelt.h | 11 +----------
4 files changed, 14 insertions(+), 13 deletions(-)
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -350,11 +350,19 @@ struct load_weight {
* Only for tasks we track a moving average of the past instantaneous
* estimated utilization. This allows to absorb sporadic drops in utilization
* of an otherwise almost periodic task.
+ *
+ * The UTIL_AVG_UNCHANGED flag is used to synchronize util_est with util_avg
+ * updates. When a task is dequeued, its util_est should not be updated if its
+ * util_avg has not been updated in the meantime.
+ * This information is mapped into the MSB bit of util_est.enqueued at dequeue
+ * time. Since max value of util_est.enqueued for a task is 1024 (PELT util_avg
+ * for a task) it is safe to use MSB.
*/
struct util_est {
unsigned int enqueued;
unsigned int ewma;
#define UTIL_EST_WEIGHT_SHIFT 2
+#define UTIL_AVG_UNCHANGED 0x80000000
} __attribute__((__aligned__(sizeof(u64))));
/*
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -888,6 +888,7 @@ __initcall(init_sched_debug_procfs);
#define __PS(S, F) SEQ_printf(m, "%-45s:%21Ld\n", S, (long long)(F))
#define __P(F) __PS(#F, F)
#define P(F) __PS(#F, p->F)
+#define PM(F, M) __PS(#F, p->F & (M))
#define __PSN(S, F) SEQ_printf(m, "%-45s:%14Ld.%06ld\n", S, SPLIT_NS((long long)(F)))
#define __PN(F) __PSN(#F, F)
#define PN(F) __PSN(#F, p->F)
@@ -1014,7 +1015,7 @@ void proc_sched_show_task(struct task_st
P(se.avg.util_avg);
P(se.avg.last_update_time);
P(se.avg.util_est.ewma);
- P(se.avg.util_est.enqueued);
+ PM(se.avg.util_est.enqueued, ~UTIL_AVG_UNCHANGED);
#endif
#ifdef CONFIG_UCLAMP_TASK
__PS("uclamp.min", p->uclamp_req[UCLAMP_MIN].value);
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3896,7 +3896,7 @@ static inline unsigned long _task_util_e
{
struct util_est ue = READ_ONCE(p->se.avg.util_est);
- return (max(ue.ewma, ue.enqueued) | UTIL_AVG_UNCHANGED);
+ return max(ue.ewma, (ue.enqueued & ~UTIL_AVG_UNCHANGED));
}
static inline unsigned long task_util_est(struct task_struct *p)
@@ -3996,7 +3996,7 @@ static inline void util_est_update(struc
* Reset EWMA on utilization increases, the moving average is used only
* to smooth utilization decreases.
*/
- ue.enqueued = (task_util(p) | UTIL_AVG_UNCHANGED);
+ ue.enqueued = task_util(p);
if (sched_feat(UTIL_EST_FASTUP)) {
if (ue.ewma < ue.enqueued) {
ue.ewma = ue.enqueued;
@@ -4045,6 +4045,7 @@ static inline void util_est_update(struc
ue.ewma += last_ewma_diff;
ue.ewma >>= UTIL_EST_WEIGHT_SHIFT;
done:
+ ue.enqueued |= UTIL_AVG_UNCHANGED;
WRITE_ONCE(p->se.avg.util_est, ue);
trace_sched_util_est_se_tp(&p->se);
--- a/kernel/sched/pelt.h
+++ b/kernel/sched/pelt.h
@@ -42,15 +42,6 @@ static inline u32 get_pelt_divider(struc
return LOAD_AVG_MAX - 1024 + avg->period_contrib;
}
-/*
- * When a task is dequeued, its estimated utilization should not be update if
- * its util_avg has not been updated at least once.
- * This flag is used to synchronize util_avg updates with util_est updates.
- * We map this information into the LSB bit of the utilization saved at
- * dequeue time (i.e. util_est.dequeued).
- */
-#define UTIL_AVG_UNCHANGED 0x1
-
static inline void cfs_se_util_change(struct sched_avg *avg)
{
unsigned int enqueued;
@@ -58,7 +49,7 @@ static inline void cfs_se_util_change(st
if (!sched_feat(UTIL_EST))
return;
- /* Avoid store if the flag has been already set */
+ /* Avoid store if the flag has been already reset */
enqueued = avg->util_est.enqueued;
if (!(enqueued & UTIL_AVG_UNCHANGED))
return;
From: Nathan Chancellor <[email protected]>
commit d4c6399900364facd84c9e35ce1540b6046c345f upstream.
With x86_64_defconfig and the following configs, there is an orphan
section warning:
CONFIG_SMP=n
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_KVM=y
CONFIG_PARAVIRT=y
ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/cpu/vmware.o' being placed in section `.data..decrypted'
ld: warning: orphan section `.data..decrypted' from `arch/x86/kernel/kvm.o' being placed in section `.data..decrypted'
These sections are created with DEFINE_PER_CPU_DECRYPTED, which
ultimately turns into __PCPU_ATTRS, which in turn has a section
attribute with a value of PER_CPU_BASE_SECTION + the section name. When
CONFIG_SMP is not set, the base section is .data and that is not
currently handled in any linker script.
Add .data..decrypted to PERCPU_DECRYPTED_SECTION, which is included in
PERCPU_INPUT -> PERCPU_SECTION, which is include in the x86 linker
script when either CONFIG_X86_64 or CONFIG_SMP is unset, taking care of
the warning.
Fixes: ac26963a1175 ("percpu: Introduce DEFINE_PER_CPU_DECRYPTED")
Link: https://github.com/ClangBuiltLinux/linux/issues/1360
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Tested-by: Nick Desaulniers <[email protected]> # build
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/vmlinux.lds.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -943,6 +943,7 @@
#ifdef CONFIG_AMD_MEM_ENCRYPT
#define PERCPU_DECRYPTED_SECTION \
. = ALIGN(PAGE_SIZE); \
+ *(.data..decrypted) \
*(.data..percpu..decrypted) \
. = ALIGN(PAGE_SIZE);
#else
From: Sean Christopherson <[email protected]>
commit f31500b0d437a2464ca5972d8f5439e156b74960 upstream.
Use the __string() machinery provided by the tracing subystem to make a
copy of the string literals consumed by the "nested VM-Enter failed"
tracepoint. A complete copy is necessary to ensure that the tracepoint
can't outlive the data/memory it consumes and deference stale memory.
Because the tracepoint itself is defined by kvm, if kvm-intel and/or
kvm-amd are built as modules, the memory holding the string literals
defined by the vendor modules will be freed when the module is unloaded,
whereas the tracepoint and its data in the ring buffer will live until
kvm is unloaded (or "indefinitely" if kvm is built-in).
This bug has existed since the tracepoint was added, but was recently
exposed by a new check in tracing to detect exactly this type of bug.
fmt: '%s%s
' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: '
WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0
CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184
Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
RIP: 0010:trace_check_vprintf+0x3be/0x3e0
Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20
RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8
RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4
R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000
FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0
Call Trace:
trace_event_printf+0x5e/0x80
trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm]
print_trace_line+0x1dd/0x4e0
s_show+0x45/0x150
seq_read_iter+0x2d5/0x4c0
seq_read+0x106/0x150
vfs_read+0x98/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Steven Rostedt <[email protected]>
Fixes: 380e0055bc7e ("KVM: nVMX: trace nested VM-Enter failures detected by H/W")
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/trace.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -1550,16 +1550,16 @@ TRACE_EVENT(kvm_nested_vmenter_failed,
TP_ARGS(msg, err),
TP_STRUCT__entry(
- __field(const char *, msg)
+ __string(msg, msg)
__field(u32, err)
),
TP_fast_assign(
- __entry->msg = msg;
+ __assign_str(msg, msg);
__entry->err = err;
),
- TP_printk("%s%s", __entry->msg, !__entry->err ? "" :
+ TP_printk("%s%s", __get_str(msg), !__entry->err ? "" :
__print_symbolic(__entry->err, VMX_VMENTER_INSTRUCTION_ERRORS))
);
From: Marco Elver <[email protected]>
commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream.
KCSAN reports a data race between increment and decrement of pin_count:
write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1:
find_get_context kernel/events/core.c:4617
__do_sys_perf_event_open kernel/events/core.c:12097 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0:
perf_unpin_context kernel/events/core.c:1525 [inline]
__do_sys_perf_event_open kernel/events/core.c:12328 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
Because neither read-modify-write here is atomic, this can lead to one
of the operations being lost, resulting in an inconsistent pin_count.
Fix it by adding the missing locking in the CPU-event case.
Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races")
Reported-by: [email protected]
Signed-off-by: Marco Elver <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4542,7 +4542,9 @@ find_get_context(struct pmu *pmu, struct
cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
ctx = &cpuctx->ctx;
get_ctx(ctx);
+ raw_spin_lock_irqsave(&ctx->lock, flags);
++ctx->pin_count;
+ raw_spin_unlock_irqrestore(&ctx->lock, flags);
return ctx;
}
From: CodyYao-oc <[email protected]>
commit a8383dfb2138742a1bb77b481ada047aededa2ba upstream.
The following commit:
3a4ac121c2ca ("x86/perf: Add hardware performance events support for Zhaoxin CPU.")
Got the old-style NMI watchdog logic wrong and broke it for basically every
Intel CPU where it was active. Which is only truly old CPUs, so few people noticed.
On CPUs with perf events support we turn off the old-style NMI watchdog, so it
was pretty pointless to add the logic for X86_VENDOR_ZHAOXIN to begin with ... :-/
Anyway, the fix is to restore the old logic and add a 'break'.
[ mingo: Wrote a new changelog. ]
Fixes: 3a4ac121c2ca ("x86/perf: Add hardware performance events support for Zhaoxin CPU.")
Signed-off-by: CodyYao-oc <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/perfctr-watchdog.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -63,7 +63,7 @@ static inline unsigned int nmi_perfctr_m
case 15:
return msr - MSR_P4_BPU_PERFCTR0;
}
- fallthrough;
+ break;
case X86_VENDOR_ZHAOXIN:
case X86_VENDOR_CENTAUR:
return msr - MSR_ARCH_PERFMON_PERFCTR0;
@@ -96,7 +96,7 @@ static inline unsigned int nmi_evntsel_m
case 15:
return msr - MSR_P4_BSU_ESCR0;
}
- fallthrough;
+ break;
case X86_VENDOR_ZHAOXIN:
case X86_VENDOR_CENTAUR:
return msr - MSR_ARCH_PERFMON_EVENTSEL0;
From: Leo Yan <[email protected]>
[ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ]
When peeking an event, it has a short path and a long path. The short
path uses the session pointer "one_mmap_addr" to directly fetch the
event; and the long path needs to read out the event header and the
following event data from file and fill into the buffer pointer passed
through the argument "buf".
The issue is in the long path that it copies the event header and event
data into the same destination address which pointer "buf", this means
the event header is overwritten. We are just lucky to run into the
short path in most cases, so we don't hit the issue in the long path.
This patch adds the offset "hdr_sz" to the pointer "buf" when copying
the event data, so that it can reserve the event header which can be
used properly by its caller.
Fixes: 5a52f33adf02 ("perf session: Add perf_session__peek_event()")
Signed-off-by: Leo Yan <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/session.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index e9d4e6f4bdf3..b7cfdbf207b7 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1710,6 +1710,7 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset,
if (event->header.size < hdr_sz || event->header.size > buf_sz)
return -1;
+ buf += hdr_sz;
rest = event->header.size - hdr_sz;
if (readn(fd, buf, rest) != (ssize_t)rest)
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ]
None of the callers are expecting NULL returns from nfs_get_client() so
this code will lead to an Oops. It's better to return an error
pointer. I expect that this is dead code so hopefully no one is
affected.
Fixes: 31434f496abb ("nfs: check hostname in nfs_get_client")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index ff5c4d0d6d13..686b211342a8 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -406,7 +406,7 @@ struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_init)
if (cl_init->hostname == NULL) {
WARN_ON(1);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
/* see if the client already exists */
--
2.30.2
From: Kai Vehmanen <[email protected]>
commit b640e8a4bd24e17ce24a064d704aba14831651a8 upstream.
The recent changes to use common code to power up/down DSP cores also
removed the reset of the core state at suspend. It turns out this is
still needed. When the firmware state is reset to
SOF_FW_BOOT_NOT_STARTED, also enabled_cores should be reset, and
existing DSP drivers depend on this.
BugLink: https://github.com/thesofproject/linux/issues/2824
Fixes: 42077f08b3 ("ASoC: SOF: update dsp core power status in common APIs")
Signed-off-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sof/pm.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/soc/sof/pm.c
+++ b/sound/soc/sof/pm.c
@@ -256,6 +256,7 @@ suspend:
/* reset FW state */
sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+ sdev->enabled_cores_mask = 0;
return ret;
}
From: Anna Schumaker <[email protected]>
commit 476bdb04c501fc64bf3b8464ffddefc8dbe01577 upstream.
KASAN reports a use-after-free when attempting to mount two different
exports through two different NICs that belong to the same server.
Olga was able to hit this with kernels starting somewhere between 5.7
and 5.10, but I traced the patch that introduced the clear_bit() call to
4.13. So something must have changed in the refcounting of the clp
pointer to make this call to nfs_put_client() the very last one.
Fixes: 8dcbec6d20 ("NFSv41: Handle EXCHID4_FLAG_CONFIRMED_R during NFSv4.1 migration")
Cc: [email protected] # 4.13+
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4client.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -435,8 +435,8 @@ struct nfs_client *nfs4_init_client(stru
*/
nfs_mark_client_ready(clp, -EPERM);
}
- nfs_put_client(clp);
clear_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags);
+ nfs_put_client(clp);
return old;
error:
From: Paolo Bonzini <[email protected]>
commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream.
array_index_nospec does not work for uint64_t on 32-bit builds.
However, the size of a memory slot must be less than 20 bits wide
on those system, since the memory slot must fit in the user
address space. So just store it in an unsigned long.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kvm_host.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1124,8 +1124,8 @@ __gfn_to_hva_memslot(struct kvm_memory_s
* table walks, do not let the processor speculate loads outside
* the guest's registered memslots.
*/
- unsigned long offset = array_index_nospec(gfn - slot->base_gfn,
- slot->npages);
+ unsigned long offset = gfn - slot->base_gfn;
+ offset = array_index_nospec(offset, slot->npages);
return slot->userspace_addr + offset * PAGE_SIZE;
}
From: Trond Myklebust <[email protected]>
commit c3aba897c6e67fa464ec02b1f17911577d619713 upstream.
If the inode is being evicted but has to return a layout first, then
that too can cause a deadlock in the corner case where the server
reboots.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -9630,15 +9630,20 @@ int nfs4_proc_layoutreturn(struct nfs4_l
&task_setup_data.rpc_client, &msg);
dprintk("--> %s\n", __func__);
+ lrp->inode = nfs_igrab_and_active(lrp->args.inode);
if (!sync) {
- lrp->inode = nfs_igrab_and_active(lrp->args.inode);
if (!lrp->inode) {
nfs4_layoutreturn_release(lrp);
return -EAGAIN;
}
task_setup_data.flags |= RPC_TASK_ASYNC;
}
- nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1, 0);
+ if (!lrp->inode)
+ nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1,
+ 1);
+ else
+ nfs4_init_sequence(&lrp->args.seq_args, &lrp->res.seq_res, 1,
+ 0);
task = rpc_run_task(&task_setup_data);
if (IS_ERR(task))
return PTR_ERR(task);
From: Kamal Heib <[email protected]>
commit a3e74fb9247cd530dca246699d5eb5a691884d32 upstream.
After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib
interfaces"), if the IPoIB device is moved to non-initial netns,
destroying that netns lets the device vanish instead of moving it back to
the initial netns, This is happening because default_device_exit() skips
the interfaces due to having rtnl_link_ops set.
Steps to reporoduce:
ip netns add foo
ip link set mlx5_ib0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50
Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT
nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d
fuse
CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: netns cleanup_net
RIP: 0010:netdev_exit+0x3f/0x50
Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48
8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b
c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00
RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206
RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d
RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00
RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00
R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620
R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20
FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
ops_exit_list.isra.9+0x36/0x70
cleanup_net+0x234/0x390
process_one_work+0x1cb/0x360
? process_one_work+0x360/0x360
worker_thread+0x30/0x370
? process_one_work+0x360/0x360
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
To avoid the above warning and later on the kernel panic that could happen
on shutdown due to a NULL pointer dereference, make sure to set the
netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev:
Move device back to init netns on owning netns delete") to properly
restore the IPoIB interfaces to the initial netns.
Fixes: 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
@@ -163,6 +163,7 @@ static size_t ipoib_get_size(const struc
static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
.kind = "ipoib",
+ .netns_refund = true,
.maxtype = IFLA_IPOIB_MAX,
.policy = ipoib_policy,
.priv_size = sizeof(struct ipoib_dev_priv),
From: Mark Zhang <[email protected]>
commit a0ffb4c12f7fa89163e228e6f27df09b46631db1 upstream.
In a fork scenario, the parent and child can have same virtual address and
also share the uverbs fd. That causes to the list_for_each_entry search
return same doorbell physical page for all processes, even though that
page has been COW' or copied.
This patch takes the mm_struct into consideration during search, to make
sure that VA's belonging to different processes are not intermixed.
Resolves the malfunction of uverbs after fork in some specific cases.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/feacc23fe0bc6e1088c6824d5583798745e72405.1622726212.git.leonro@nvidia.com
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/doorbell.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/hw/mlx5/doorbell.c
+++ b/drivers/infiniband/hw/mlx5/doorbell.c
@@ -41,6 +41,7 @@ struct mlx5_ib_user_db_page {
struct ib_umem *umem;
unsigned long user_virt;
int refcnt;
+ struct mm_struct *mm;
};
int mlx5_ib_db_map_user(struct mlx5_ib_ucontext *context,
@@ -53,7 +54,8 @@ int mlx5_ib_db_map_user(struct mlx5_ib_u
mutex_lock(&context->db_page_mutex);
list_for_each_entry(page, &context->db_page_list, list)
- if (page->user_virt == (virt & PAGE_MASK))
+ if ((current->mm == page->mm) &&
+ (page->user_virt == (virt & PAGE_MASK)))
goto found;
page = kmalloc(sizeof(*page), GFP_KERNEL);
@@ -71,6 +73,8 @@ int mlx5_ib_db_map_user(struct mlx5_ib_u
kfree(page);
goto out;
}
+ mmgrab(current->mm);
+ page->mm = current->mm;
list_add(&page->list, &context->db_page_list);
@@ -91,6 +95,7 @@ void mlx5_ib_db_unmap_user(struct mlx5_i
if (!--db->u.user_page->refcnt) {
list_del(&db->u.user_page->list);
+ mmdrop(db->u.user_page->mm);
ib_umem_release(db->u.user_page->umem);
kfree(db->u.user_page);
}
From: Wilken Gottwalt <[email protected]>
commit 7656cd2177612aa7c299b083ecff30a4d3e9a587 upstream.
During standby some PSUs turn off the microcontroller. A re-init is
required during resume or the microcontroller stays unresponsive.
Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Wilken Gottwalt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
@@ -570,6 +570,16 @@ static int corsairpsu_raw_event(struct h
return 0;
}
+#ifdef CONFIG_PM
+static int corsairpsu_resume(struct hid_device *hdev)
+{
+ struct corsairpsu_data *priv = hid_get_drvdata(hdev);
+
+ /* some PSUs turn off the microcontroller during standby, so a reinit is required */
+ return corsairpsu_init(priv);
+}
+#endif
+
static const struct hid_device_id corsairpsu_idtable[] = {
{ HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
{ HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
@@ -592,6 +602,10 @@ static struct hid_driver corsairpsu_driv
.probe = corsairpsu_probe,
.remove = corsairpsu_remove,
.raw_event = corsairpsu_raw_event,
+#ifdef CONFIG_PM
+ .resume = corsairpsu_resume,
+ .reset_resume = corsairpsu_resume,
+#endif
};
module_hid_driver(corsairpsu_driver);
From: Srinivas Kandagatla <[email protected]>
commit dbec64b11c65d74f31427e2b9d5746fbf17bf840 upstream.
bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1)
which is not right, and this was caught by below usban check
UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpio/gpio-wcd934x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpio/gpio-wcd934x.c
+++ b/drivers/gpio/gpio-wcd934x.c
@@ -7,7 +7,7 @@
#include <linux/slab.h>
#include <linux/of_device.h>
-#define WCD_PIN_MASK(p) BIT(p - 1)
+#define WCD_PIN_MASK(p) BIT(p)
#define WCD_REG_DIR_CTL_OFFSET 0x42
#define WCD_REG_VAL_CTL_OFFSET 0x43
#define WCD934X_NPINS 5
From: Ming Lei <[email protected]>
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream.
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -347,7 +347,7 @@ static void scsi_host_dev_release(struct
ida_simple_remove(&host_index_ida, shost->host_no);
- if (parent)
+ if (shost->shost_state != SHOST_CREATED)
put_device(parent);
kfree(shost);
}
From: Ming Lei <[email protected]>
commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream.
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -392,8 +392,10 @@ struct Scsi_Host *scsi_host_alloc(struct
mutex_init(&shost->scan_mutex);
index = ida_simple_get(&host_index_ida, 0, 0, GFP_KERNEL);
- if (index < 0)
- goto fail_kfree;
+ if (index < 0) {
+ kfree(shost);
+ return NULL;
+ }
shost->host_no = index;
shost->dma_channel = 0xff;
@@ -486,7 +488,7 @@ struct Scsi_Host *scsi_host_alloc(struct
shost_printk(KERN_WARNING, shost,
"error handler thread failed to spawn, error = %ld\n",
PTR_ERR(shost->ehandler));
- goto fail_index_remove;
+ goto fail;
}
shost->tmf_work_q = alloc_workqueue("scsi_tmf_%d",
@@ -495,17 +497,18 @@ struct Scsi_Host *scsi_host_alloc(struct
if (!shost->tmf_work_q) {
shost_printk(KERN_WARNING, shost,
"failed to create tmf workq\n");
- goto fail_kthread;
+ goto fail;
}
scsi_proc_hostdir_add(shost->hostt);
return shost;
+ fail:
+ /*
+ * Host state is still SHOST_CREATED and that is enough to release
+ * ->shost_gendev. scsi_host_dev_release() will free
+ * dev_name(&shost->shost_dev).
+ */
+ put_device(&shost->shost_gendev);
- fail_kthread:
- kthread_stop(shost->ehandler);
- fail_index_remove:
- ida_simple_remove(&host_index_ida, shost->host_no);
- fail_kfree:
- kfree(shost);
return NULL;
}
EXPORT_SYMBOL(scsi_host_alloc);
From: Ming Lei <[email protected]>
commit 11714026c02d613c30a149c3f4c4a15047744529 upstream.
scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.
Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Reported-by: John Garry <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -254,12 +254,11 @@ int scsi_add_host_with_dma(struct Scsi_H
device_enable_async_suspend(&shost->shost_dev);
+ get_device(&shost->shost_gendev);
error = device_add(&shost->shost_dev);
if (error)
goto out_del_gendev;
- get_device(&shost->shost_gendev);
-
if (shost->transportt->host_size) {
shost->shost_data = kzalloc(shost->transportt->host_size,
GFP_KERNEL);
@@ -297,6 +296,11 @@ int scsi_add_host_with_dma(struct Scsi_H
out_del_dev:
device_del(&shost->shost_dev);
out_del_gendev:
+ /*
+ * Host state is SHOST_RUNNING so we have to explicitly release
+ * ->shost_dev.
+ */
+ put_device(&shost->shost_dev);
device_del(&shost->shost_gendev);
out_disable_runtime_pm:
device_disable_async_suspend(&shost->shost_gendev);
From: Ming Lei <[email protected]>
commit 3719f4ff047e20062b8314c23ec3cab84d74c908 upstream.
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bart Van Assche <[email protected]>
Cc: John Garry <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Tested-by: John Garry <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/hosts.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -278,23 +278,22 @@ int scsi_add_host_with_dma(struct Scsi_H
if (!shost->work_q) {
error = -EINVAL;
- goto out_free_shost_data;
+ goto out_del_dev;
}
}
error = scsi_sysfs_add_host(shost);
if (error)
- goto out_destroy_host;
+ goto out_del_dev;
scsi_proc_host_add(shost);
scsi_autopm_put_host(shost);
return error;
- out_destroy_host:
- if (shost->work_q)
- destroy_workqueue(shost->work_q);
- out_free_shost_data:
- kfree(shost->shost_data);
+ /*
+ * Any host allocation in this function will be freed in
+ * scsi_host_dev_release().
+ */
out_del_dev:
device_del(&shost->shost_dev);
out_del_gendev:
@@ -304,7 +303,6 @@ int scsi_add_host_with_dma(struct Scsi_H
pm_runtime_disable(&shost->shost_gendev);
pm_runtime_set_suspended(&shost->shost_gendev);
pm_runtime_put_noidle(&shost->shost_gendev);
- scsi_mq_destroy_tags(shost);
fail:
return error;
}
From: Arnd Bergmann <[email protected]>
commit d94b93a9101573eb75b819dee94b1417acff631b upstream.
Since commit 83109d5d5fba ("x86/build: Warn on orphan section placement"),
we get a warning for objects in orphan sections. The cpuidle implementation
for OMAP causes this when CONFIG_CPU_IDLE is disabled:
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
arm-linux-gnueabi-ld: warning: orphan section `__cpuidle_method_of_table' from `arch/arm/mach-omap2/pm33xx-core.o' being placed in section `__cpuidle_method_of_table'
Change the definition of CPUIDLE_METHOD_OF_DECLARE() to silently
drop the table and all code referenced from it when CONFIG_CPU_IDLE
is disabled.
Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/cpuidle.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -7,9 +7,11 @@
#ifdef CONFIG_CPU_IDLE
extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
+#define __cpuidle_method_section __used __section("__cpuidle_method_of_table")
#else
static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index) { return -ENODEV; }
+#define __cpuidle_method_section __maybe_unused /* drop silently */
#endif
/* Common ARM WFI state */
@@ -42,8 +44,7 @@ struct of_cpuidle_method {
#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \
static const struct of_cpuidle_method __cpuidle_method_of_table_##name \
- __used __section("__cpuidle_method_of_table") \
- = { .method = _method, .ops = _ops }
+ __cpuidle_method_section = { .method = _method, .ops = _ops }
extern int arm_cpuidle_suspend(int index);
From: Mark Bloch <[email protected]>
commit edc0b0bccc9c80d9a44d3002dcca94984b25e7cf upstream.
Allow creating FDB steering rules only when in switchdev mode.
The only software model where a userspace application can manipulate
FDB entries is when it manages the eswitch. This is only possible in
switchdev mode where we expose a single RDMA device with representors
for all the vports that are connected to the eswitch.
Fixes: 52438be44112 ("RDMA/mlx5: Allow inserting a steering rule to the FDB")
Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Mark Bloch <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/fs.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/infiniband/hw/mlx5/fs.c
+++ b/drivers/infiniband/hw/mlx5/fs.c
@@ -2134,6 +2134,12 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD
if (err)
goto end;
+ if (obj->ns_type == MLX5_FLOW_NAMESPACE_FDB &&
+ mlx5_eswitch_mode(dev->mdev) != MLX5_ESWITCH_OFFLOADS) {
+ err = -EINVAL;
+ goto end;
+ }
+
uobj->object = obj;
obj->mdev = dev->mdev;
atomic_set(&obj->usecnt, 0);
From: Maximilian Luz <[email protected]>
commit b430e1d65ef6eeee42c4e53028f8dfcc6abc728b upstream.
Disabling events silently fails due to the wrong command ID being used.
Instead of the command ID for the disable call, the command ID for the
enable call was being used. This causes the disable call to enable the
event instead. As the event is already enabled when we call this
function, the EC silently drops this command and does nothing.
Use the correct command ID for disabling the event to fix this.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/surface/aggregator/controller.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -1907,7 +1907,7 @@ static int ssam_ssh_event_disable(struct
{
int status;
- status = __ssam_ssh_event_request(ctrl, reg, reg.cid_enable, id, flags);
+ status = __ssam_ssh_event_request(ctrl, reg, reg.cid_disable, id, flags);
if (status < 0 && status != -EINVAL) {
ssam_err(ctrl,
From: Vincent Guittot <[email protected]>
commit 7c7ad626d9a0ff0a36c1e2a3cfbbc6a13828d5eb upstream.
when removing a cfs_rq from the list we only check _sum value so we must
ensure that _avg and _sum stay synced so load_sum can't be null whereas
load_avg is not after propagating load in the cgroup hierarchy.
Use load_avg to compute load_sum similarly to what is done for util_sum
and runnable_sum.
Fixes: 0e2d2aaaae52 ("sched/fair: Rewrite PELT migration propagation")
Reported-by: Odin Ugedal <[email protected]>
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Odin Ugedal <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/fair.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3494,10 +3494,9 @@ update_tg_cfs_runnable(struct cfs_rq *cf
static inline void
update_tg_cfs_load(struct cfs_rq *cfs_rq, struct sched_entity *se, struct cfs_rq *gcfs_rq)
{
- long delta_avg, running_sum, runnable_sum = gcfs_rq->prop_runnable_sum;
+ long delta, running_sum, runnable_sum = gcfs_rq->prop_runnable_sum;
unsigned long load_avg;
u64 load_sum = 0;
- s64 delta_sum;
u32 divider;
if (!runnable_sum)
@@ -3544,13 +3543,13 @@ update_tg_cfs_load(struct cfs_rq *cfs_rq
load_sum = (s64)se_weight(se) * runnable_sum;
load_avg = div_s64(load_sum, divider);
- delta_sum = load_sum - (s64)se_weight(se) * se->avg.load_sum;
- delta_avg = load_avg - se->avg.load_avg;
+ delta = load_avg - se->avg.load_avg;
se->avg.load_sum = runnable_sum;
se->avg.load_avg = load_avg;
- add_positive(&cfs_rq->avg.load_avg, delta_avg);
- add_positive(&cfs_rq->avg.load_sum, delta_sum);
+
+ add_positive(&cfs_rq->avg.load_avg, delta);
+ cfs_rq->avg.load_sum = cfs_rq->avg.load_avg * divider;
}
static inline void add_tg_cfs_propagate(struct cfs_rq *cfs_rq, long runnable_sum)
From: Trond Myklebust <[email protected]>
[ Upstream commit dfe1fe75e00e4c724ede7b9e593f6f680e446c5f ]
If the inode is being evicted, but has to return a delegation first,
then it can cause a deadlock in the corner case where the server reboots
before the delegreturn completes, but while the call to iget5_locked() in
nfs4_opendata_get_inode() is waiting for the inode free to complete.
Since the open call still holds a session slot, the reboot recovery
cannot proceed.
In order to break the logjam, we can turn the delegation return into a
privileged operation for the case where we're evicting the inode. We
know that in that case, there can be no other state recovery operation
that conflicts.
Reported-by: zhangxiaoxu (A) <[email protected]>
Fixes: 5fcdfacc01f3 ("NFSv4: Return delegations synchronously in evict_inode")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4_fs.h | 1 +
fs/nfs/nfs4proc.c | 12 +++++++++++-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 065cb04222a1..543d916f79ab 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -205,6 +205,7 @@ struct nfs4_exception {
struct inode *inode;
nfs4_stateid *stateid;
long timeout;
+ unsigned char task_is_privileged : 1;
unsigned char delay : 1,
recovering : 1,
retry : 1;
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 0b809cc6ad1d..bd3db61b746f 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -590,6 +590,8 @@ int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_
goto out_retry;
}
if (exception->recovering) {
+ if (exception->task_is_privileged)
+ return -EDEADLOCK;
ret = nfs4_wait_clnt_recover(clp);
if (test_bit(NFS_MIG_FAILED, &server->mig_status))
return -EIO;
@@ -615,6 +617,8 @@ nfs4_async_handle_exception(struct rpc_task *task, struct nfs_server *server,
goto out_retry;
}
if (exception->recovering) {
+ if (exception->task_is_privileged)
+ return -EDEADLOCK;
rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
@@ -6381,6 +6385,7 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata)
struct nfs4_exception exception = {
.inode = data->inode,
.stateid = &data->stateid,
+ .task_is_privileged = data->args.seq_args.sa_privileged,
};
if (!nfs4_sequence_done(task, &data->res.seq_res))
@@ -6504,7 +6509,6 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
data = kzalloc(sizeof(*data), GFP_NOFS);
if (data == NULL)
return -ENOMEM;
- nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1, 0);
nfs4_state_protect(server->nfs_client,
NFS_SP4_MACH_CRED_CLEANUP,
@@ -6535,6 +6539,12 @@ static int _nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred,
}
}
+ if (!data->inode)
+ nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1,
+ 1);
+ else
+ nfs4_init_sequence(&data->args.seq_args, &data->res.seq_res, 1,
+ 0);
task_setup_data.callback_data = data;
msg.rpc_argp = &data->args;
msg.rpc_resp = &data->res;
--
2.30.2
From: Robert Marko <[email protected]>
commit e13d1127241404f1c3eb1379ac4dd100eaf385b4 upstream.
Current shunt LSB values got reversed during in the
original driver commit.
So, correct the current shunt LSB values according to
the datasheet.
This caused reading slightly skewed current values.
Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Robert Marko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/tps23861.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/tps23861.c
+++ b/drivers/hwmon/tps23861.c
@@ -105,8 +105,8 @@
#define TEMPERATURE_LSB 652 /* 0.652 degrees Celsius */
#define VOLTAGE_LSB 3662 /* 3.662 mV */
#define SHUNT_RESISTOR_DEFAULT 255000 /* 255 mOhm */
-#define CURRENT_LSB_255 62260 /* 62.260 uA */
-#define CURRENT_LSB_250 61039 /* 61.039 uA */
+#define CURRENT_LSB_250 62260 /* 62.260 uA */
+#define CURRENT_LSB_255 61039 /* 61.039 uA */
#define RESISTANCE_LSB 110966 /* 11.0966 Ohm*/
#define RESISTANCE_LSB_LOW 157216 /* 15.7216 Ohm*/
From: Bjorn Andersson <[email protected]>
[ Upstream commit 30e9857a134905ac0d03ca244b615cc3ff0a076e ]
It's currently not possible to select the SC8180x TLMM driver, due to it
selecting PINCTRL_MSM, rather than depending on the same. Fix this.
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 6853a896c476..740ecf6011a9 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -223,7 +223,7 @@ config PINCTRL_SC7280
config PINCTRL_SC8180X
tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
depends on GPIOLIB && OF
- select PINCTRL_MSM
+ depends on PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm Technologies Inc TLMM block found on the Qualcomm
--
2.30.2
From: Alaa Hleihel <[email protected]>
commit 2ba0aa2feebda680ecfc3c552e867cf4d1b05a3a upstream.
The function init_cq_frag_buf() can be called to initialize the current CQ
fragments buffer cq->buf, or the temporary cq->resize_buf that is filled
during CQ resize operation.
However, the offending commit started to use function get_cqe() for
getting the CQEs, the issue with this change is that get_cqe() always
returns CQEs from cq->buf, which leads us to initialize the wrong buffer,
and in case of enlarging the CQ we try to access elements beyond the size
of the current cq->buf and eventually hit a kernel panic.
[exception RIP: init_cq_frag_buf+103]
[ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib]
[ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core]
[ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt]
[ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt]
[ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt]
[ffff9f799ddcbec8] kthread at ffffffffa66c5da1
[ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd
Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that
takes the correct source buffer as a parameter.
Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)")
Link: https://lore.kernel.org/r/90a0e8c924093cfa50a482880ad7e7edb73dc19a.1623309971.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx5/cq.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -849,15 +849,14 @@ static void destroy_cq_user(struct mlx5_
ib_umem_release(cq->buf.umem);
}
-static void init_cq_frag_buf(struct mlx5_ib_cq *cq,
- struct mlx5_ib_cq_buf *buf)
+static void init_cq_frag_buf(struct mlx5_ib_cq_buf *buf)
{
int i;
void *cqe;
struct mlx5_cqe64 *cqe64;
for (i = 0; i < buf->nent; i++) {
- cqe = get_cqe(cq, i);
+ cqe = mlx5_frag_buf_get_wqe(&buf->fbc, i);
cqe64 = buf->cqe_size == 64 ? cqe : cqe + 64;
cqe64->op_own = MLX5_CQE_INVALID << 4;
}
@@ -883,7 +882,7 @@ static int create_cq_kernel(struct mlx5_
if (err)
goto err_db;
- init_cq_frag_buf(cq, &cq->buf);
+ init_cq_frag_buf(&cq->buf);
*inlen = MLX5_ST_SZ_BYTES(create_cq_in) +
MLX5_FLD_SZ_BYTES(create_cq_in, pas[0]) *
@@ -1184,7 +1183,7 @@ static int resize_kernel(struct mlx5_ib_
if (err)
goto ex;
- init_cq_frag_buf(cq, cq->resize_buf);
+ init_cq_frag_buf(cq->resize_buf);
return 0;
From: Dai Ngo <[email protected]>
commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream.
Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it
re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before
retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if
the retry fails. This causes problem for subsequent setattr
requests for v4 server that does not have idmapping configured.
This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER
and NFS4ERR_BADNAME and skips the retry, since the kernel isn't
involved in encoding the ACEs, and return -EINVAL.
Steps to reproduce the problem:
# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# touch /tmp/mnt/file1
# chown 99 /tmp/mnt/file1
# nfs4_setfacl -a A::[email protected]:wrtncy /tmp/mnt/file1
Failed setxattr operation: Invalid argument
# chown 99 /tmp/mnt/file1
chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument
# umount /tmp/mnt
# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# chown 99 /tmp/mnt/file1
#
v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry
in nfs4_proc_set_acl.
Signed-off-by: Dai Ngo <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4proc.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5944,6 +5944,14 @@ static int nfs4_proc_set_acl(struct inod
do {
err = __nfs4_proc_set_acl(inode, buf, buflen);
trace_nfs4_set_acl(inode, err);
+ if (err == -NFS4ERR_BADOWNER || err == -NFS4ERR_BADNAME) {
+ /*
+ * no need to retry since the kernel
+ * isn't involved in encoding the ACEs.
+ */
+ err = -EINVAL;
+ break;
+ }
err = nfs4_handle_exception(NFS_SERVER(inode), err,
&exception);
} while (exception.retry);
From: Maor Gottlieb <[email protected]>
commit 2adcb4c5a52a2623cd2b43efa7041e74d19f3a5e upstream.
Validate port value provided by the user and with that remove no longer
needed validation by the driver. The missing check in the mlx5_ib driver
could cause to the below oops.
Call trace:
_create_flow_rule+0x2d4/0xf28 [mlx5_ib]
mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib]
ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs]
ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs]
do_vfs_ioctl+0xd0/0xaf0
ksys_ioctl+0x84/0xb4
__arm64_sys_ioctl+0x28/0xc4
el0_svc_common.constprop.3+0xa4/0x254
el0_svc_handler+0x84/0xa0
el0_svc+0x10/0x26c
Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a)
Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs")
Link: https://lore.kernel.org/r/faad30dc5219a01727f47db3dc2f029d07c82c00.1623309971.git.leonro@nvidia.com
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/uverbs_cmd.c | 5 +++++
drivers/infiniband/hw/mlx4/main.c | 3 ---
drivers/infiniband/hw/mlx5/fs.c | 5 ++---
3 files changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -3247,6 +3247,11 @@ static int ib_uverbs_ex_create_flow(stru
goto err_free_attr;
}
+ if (!rdma_is_port_valid(uobj->context->device, cmd.flow_attr.port)) {
+ err = -EINVAL;
+ goto err_uobj;
+ }
+
qp = uobj_get_obj_read(qp, UVERBS_OBJECT_QP, cmd.qp_handle, attrs);
if (!qp) {
err = -EINVAL;
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1696,9 +1696,6 @@ static struct ib_flow *mlx4_ib_create_fl
struct mlx4_dev *dev = (to_mdev(qp->device))->dev;
int is_bonded = mlx4_is_bonded(dev);
- if (!rdma_is_port_valid(qp->device, flow_attr->port))
- return ERR_PTR(-EINVAL);
-
if (flow_attr->flags & ~IB_FLOW_ATTR_FLAGS_DONT_TRAP)
return ERR_PTR(-EOPNOTSUPP);
--- a/drivers/infiniband/hw/mlx5/fs.c
+++ b/drivers/infiniband/hw/mlx5/fs.c
@@ -1194,9 +1194,8 @@ static struct ib_flow *mlx5_ib_create_fl
goto free_ucmd;
}
- if (flow_attr->port > dev->num_ports ||
- (flow_attr->flags &
- ~(IB_FLOW_ATTR_FLAGS_DONT_TRAP | IB_FLOW_ATTR_FLAGS_EGRESS))) {
+ if (flow_attr->flags &
+ ~(IB_FLOW_ATTR_FLAGS_DONT_TRAP | IB_FLOW_ATTR_FLAGS_EGRESS)) {
err = -EINVAL;
goto free_ucmd;
}
From: Shay Drory <[email protected]>
commit 404e5a12691fe797486475fe28cc0b80cb8bef2c upstream.
Currently when mlx4 maps the hca_core_clock page to the user space there
are read-modifiable registers, one of which is semaphore, on this page as
well as the clock counter. If user reads the wrong offset, it can modify
the semaphore and hang the device.
Do not map the hca_core_clock page to the user space unless the device has
been put in a backwards compatibility mode to support this feature.
After this patch, mlx4 core_clock won't be mapped to user space on the
majority of existing devices and the uverbs device time feature in
ibv_query_rt_values_ex() will be disabled.
Fixes: 52033cfb5aab ("IB/mlx4: Add mmap call to map the hardware clock")
Link: https://lore.kernel.org/r/9632304e0d6790af84b3b706d8c18732bc0d5e27.1622726305.git.leonro@nvidia.com
Signed-off-by: Shay Drory <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx4/main.c | 5 +----
drivers/net/ethernet/mellanox/mlx4/fw.c | 3 +++
drivers/net/ethernet/mellanox/mlx4/fw.h | 1 +
drivers/net/ethernet/mellanox/mlx4/main.c | 6 ++++++
include/linux/mlx4/device.h | 1 +
5 files changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -580,12 +580,9 @@ static int mlx4_ib_query_device(struct i
props->cq_caps.max_cq_moderation_count = MLX4_MAX_CQ_COUNT;
props->cq_caps.max_cq_moderation_period = MLX4_MAX_CQ_PERIOD;
- if (!mlx4_is_slave(dev->dev))
- err = mlx4_get_internal_clock_params(dev->dev, &clock_params);
-
if (uhw->outlen >= resp.response_length + sizeof(resp.hca_core_clock_offset)) {
resp.response_length += sizeof(resp.hca_core_clock_offset);
- if (!err && !mlx4_is_slave(dev->dev)) {
+ if (!mlx4_get_internal_clock_params(dev->dev, &clock_params)) {
resp.comp_mask |= MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET;
resp.hca_core_clock_offset = clock_params.offset % PAGE_SIZE;
}
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -823,6 +823,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *
#define QUERY_DEV_CAP_MAD_DEMUX_OFFSET 0xb0
#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_BASE_OFFSET 0xa8
#define QUERY_DEV_CAP_DMFS_HIGH_RATE_QPN_RANGE_OFFSET 0xac
+#define QUERY_DEV_CAP_MAP_CLOCK_TO_USER 0xc1
#define QUERY_DEV_CAP_QP_RATE_LIMIT_NUM_OFFSET 0xcc
#define QUERY_DEV_CAP_QP_RATE_LIMIT_MAX_OFFSET 0xd0
#define QUERY_DEV_CAP_QP_RATE_LIMIT_MIN_OFFSET 0xd2
@@ -841,6 +842,8 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *
if (mlx4_is_mfunc(dev))
disable_unsupported_roce_caps(outbox);
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MAP_CLOCK_TO_USER);
+ dev_cap->map_clock_to_user = field & 0x80;
MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_QP_OFFSET);
dev_cap->reserved_qps = 1 << (field & 0xf);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_QP_OFFSET);
--- a/drivers/net/ethernet/mellanox/mlx4/fw.h
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.h
@@ -131,6 +131,7 @@ struct mlx4_dev_cap {
u32 health_buffer_addrs;
struct mlx4_port_cap port_cap[MLX4_MAX_PORTS + 1];
bool wol_port[MLX4_MAX_PORTS + 1];
+ bool map_clock_to_user;
};
struct mlx4_func_cap {
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -498,6 +498,7 @@ static int mlx4_dev_cap(struct mlx4_dev
}
}
+ dev->caps.map_clock_to_user = dev_cap->map_clock_to_user;
dev->caps.uar_page_size = PAGE_SIZE;
dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE;
dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay;
@@ -1948,6 +1949,11 @@ int mlx4_get_internal_clock_params(struc
if (mlx4_is_slave(dev))
return -EOPNOTSUPP;
+ if (!dev->caps.map_clock_to_user) {
+ mlx4_dbg(dev, "Map clock to user is not supported.\n");
+ return -EOPNOTSUPP;
+ }
+
if (!params)
return -EINVAL;
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -630,6 +630,7 @@ struct mlx4_caps {
bool wol_port[MLX4_MAX_PORTS + 1];
struct mlx4_rate_limit_caps rl_caps;
u32 health_buffer_addrs;
+ bool map_clock_to_user;
};
struct mlx4_buf_list {
On Mon, 14 Jun 2021 12:25:32 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.12.11-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
On 6/14/21 4:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 6/14/2021 3:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Mon, Jun 14, 2021 at 12:25:32PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes <[email protected]>
On Mon, 14 Jun 2021 at 16:18, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.12.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.12.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.12.11-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.12.y
* git commit: 38004b22b0ae0ed236de37f13b323c9d89311f9e
* git describe: v5.12.10-174-g38004b22b0ae
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.12.y/build/v5.12.10-174-g38004b22b0ae
## No regressions (compared to v5.12.10)
## No fixes (compared to v5.12.10)
## Test result summary
total: 83712, pass: 69169, fail: 1865, skip: 11956, xfail: 722,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 0 passed, 1 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* prep-inline
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Mon, Jun 14, 2021 at 12:25:32PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.12.11 release.
> There are 173 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Jun 2021 10:26:30 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 151 pass: 151 fail: 0
Qemu test results:
total: 462 pass: 462 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter