The current implementation of the `__rt_sigaction` reference computed an
absolute offset relative to the mapped base of the VDSO. While this can
be handled in the medlow model, the medany model cannot handle this as
it is meant to be position independent. The current implementation
relied on the BFD linker relaxing the PC-relative relocation into an
absolute relocation as it was a near-zero address allowing it to be
referenced relative to `zero`.
We now extract the offsets and create a generated header allowing the
build with LLVM and lld to succeed as we no longer depend on the linker
rewriting address references near zero. This change was largely
modelled after the ARM64 target which does something similar.
Signed-off-by: Saleem Abdulrasool <[email protected]>
---
arch/riscv/Makefile | 4 ++++
arch/riscv/include/asm/vdso.h | 11 ++---------
arch/riscv/kernel/vdso/Makefile | 21 +++++++++------------
arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 5 +++++
arch/riscv/kernel/vdso/so2s.sh | 6 ------
5 files changed, 20 insertions(+), 27 deletions(-)
create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index e241e0e85ac8..f2beaa3c9fcb 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -92,6 +92,10 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+prepare: vdso_prepare
+vdso_prepare: prepare0
+ $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
+
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
KBUILD_IMAGE := $(boot)/loader.bin
else
diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
index 8454f746bbfd..a72c4093d1c7 100644
--- a/arch/riscv/include/asm/vdso.h
+++ b/arch/riscv/include/asm/vdso.h
@@ -9,24 +9,17 @@
#define _ASM_RISCV_VDSO_H
#include <linux/types.h>
+#include <generated/vdso-offsets.h>
#ifndef GENERIC_TIME_VSYSCALL
struct vdso_data {
};
#endif
-/*
- * The VDSO symbols are mapped into Linux so we can just use regular symbol
- * addressing to get their offsets in userspace. The symbols are mapped at an
- * offset of 0, but since the linker must support setting weak undefined
- * symbols to the absolute address 0 it also happens to support other low
- * addresses even when the code model suggests those low addresses would not
- * otherwise be availiable.
- */
#define VDSO_SYMBOL(base, name) \
({ \
extern const char __vdso_##name[]; \
- (void __user *)((unsigned long)(base) + __vdso_##name); \
+ (void __user *)((unsigned long)(base) + __vdso_##name##_offset); \
})
asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index f001ae91ef46..17cb755cf282 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -42,20 +42,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
# link rule for the .so file, .lds has to be first
$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
$(call if_changed,vdsold)
-LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
+LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
--build-id=sha1 --hash-style=both --eh-frame-hdr
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld --just-symbols we can then
-# refer to these symbols in the kernel code rather than hand-coded addresses.
-$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
- $(call if_changed,so2s)
-
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
$(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+ $(call if_changed,vdsosym)
+
# actual build commands
# The DSO images are built using a special linker script
# Make sure only to export the intended __vdso_xxx symbol offsets.
@@ -64,11 +66,6 @@ quiet_cmd_vdsold = VDSOLD $@
$(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) [email protected] $@ && \
rm [email protected]
-# Extracts symbol offsets from the VDSO, converting them into an assembly file
-# that contains the same symbols at the same offsets.
-quiet_cmd_so2s = SO2S $@
- cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
-
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
new file mode 100755
index 000000000000..c2e5613f3495
--- /dev/null
+++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+LC_ALL=C
+sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
deleted file mode 100755
index e64cb6d9440e..000000000000
--- a/arch/riscv/kernel/vdso/so2s.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright 2020 Palmer Dabbelt <[email protected]>
-
-sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
-| grep '^\.'
--
2.32.0.93.g670b81a890-goog
Hi Saleem,
On Wed, Jul 07, 2021 at 06:51:05PM +0000, Saleem Abdulrasool wrote:
> The current implementation of the `__rt_sigaction` reference computed an
> absolute offset relative to the mapped base of the VDSO. While this can
> be handled in the medlow model, the medany model cannot handle this as
> it is meant to be position independent. The current implementation
> relied on the BFD linker relaxing the PC-relative relocation into an
> absolute relocation as it was a near-zero address allowing it to be
> referenced relative to `zero`.
>
> We now extract the offsets and create a generated header allowing the
> build with LLVM and lld to succeed as we no longer depend on the linker
> rewriting address references near zero. This change was largely
> modelled after the ARM64 target which does something similar.
>
> Signed-off-by: Saleem Abdulrasool <[email protected]>
> ---
> arch/riscv/Makefile | 4 ++++
> arch/riscv/include/asm/vdso.h | 11 ++---------
> arch/riscv/kernel/vdso/Makefile | 21 +++++++++------------
> arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 5 +++++
> arch/riscv/kernel/vdso/so2s.sh | 6 ------
> 5 files changed, 20 insertions(+), 27 deletions(-)
> create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index e241e0e85ac8..f2beaa3c9fcb 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -92,6 +92,10 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +prepare: vdso_prepare
> +vdso_prepare: prepare0
> + $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> +
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> else
> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
> index 8454f746bbfd..a72c4093d1c7 100644
> --- a/arch/riscv/include/asm/vdso.h
> +++ b/arch/riscv/include/asm/vdso.h
> @@ -9,24 +9,17 @@
> #define _ASM_RISCV_VDSO_H
>
> #include <linux/types.h>
> +#include <generated/vdso-offsets.h>
>
> #ifndef GENERIC_TIME_VSYSCALL
> struct vdso_data {
> };
> #endif
>
> -/*
> - * The VDSO symbols are mapped into Linux so we can just use regular symbol
> - * addressing to get their offsets in userspace. The symbols are mapped at an
> - * offset of 0, but since the linker must support setting weak undefined
> - * symbols to the absolute address 0 it also happens to support other low
> - * addresses even when the code model suggests those low addresses would not
> - * otherwise be availiable.
> - */
> #define VDSO_SYMBOL(base, name) \
> ({ \
> extern const char __vdso_##name[]; \
> - (void __user *)((unsigned long)(base) + __vdso_##name); \
> + (void __user *)((unsigned long)(base) + __vdso_##name##_offset); \
> })
>
> asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
> index f001ae91ef46..17cb755cf282 100644
> --- a/arch/riscv/kernel/vdso/Makefile
> +++ b/arch/riscv/kernel/vdso/Makefile
> @@ -42,20 +42,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
> # link rule for the .so file, .lds has to be first
> $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
> $(call if_changed,vdsold)
> -LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
> +LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
> --build-id=sha1 --hash-style=both --eh-frame-hdr
>
> -# We also create a special relocatable object that should mirror the symbol
> -# table and layout of the linked DSO. With ld --just-symbols we can then
> -# refer to these symbols in the kernel code rather than hand-coded addresses.
> -$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
> - $(call if_changed,so2s)
> -
> # strip rule for the .so file
> $(obj)/%.so: OBJCOPYFLAGS := -S
> $(obj)/%.so: $(obj)/%.so.dbg FORCE
> $(call if_changed,objcopy)
>
> +# Generate VDSO offsets using helper script
> +gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> +quiet_cmd_vdsosym = VDSOSYM $@
> + cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
> +
> +include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
> + $(call if_changed,vdsosym)
> +
> # actual build commands
> # The DSO images are built using a special linker script
> # Make sure only to export the intended __vdso_xxx symbol offsets.
> @@ -64,11 +66,6 @@ quiet_cmd_vdsold = VDSOLD $@
> $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) [email protected] $@ && \
> rm [email protected]
>
> -# Extracts symbol offsets from the VDSO, converting them into an assembly file
> -# that contains the same symbols at the same offsets.
> -quiet_cmd_so2s = SO2S $@
> - cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
> -
> # install commands for the unstripped file
> quiet_cmd_vdso_install = INSTALL $@
> cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
> diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> new file mode 100755
> index 000000000000..c2e5613f3495
> --- /dev/null
> +++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +LC_ALL=C
> +sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
> diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
> deleted file mode 100755
> index e64cb6d9440e..000000000000
> --- a/arch/riscv/kernel/vdso/so2s.sh
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0+
> -# Copyright 2020 Palmer Dabbelt <[email protected]>
> -
> -sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
> -| grep '^\.'
> --
> 2.32.0.93.g670b81a890-goog
I had a difficult time getting this patch to apply as it does not appear
to be generated against the latest mainline tree, since the diff does
account for at least commit 772d7891e8b3 ("riscv: vdso: fix and clean-up
Makefile"), 08734e0581a5 ("riscv: Use vendor name for K210 SoC
support"), and 44c922572952 ("RISC-V: enable XIP") in it.
I was able to get it to apply but then I ran into the following error:
make[5]: *** No rule to make target 'arch/riscv/kernel/vdso/vdso-syms.o', needed by 'arch/riscv/kernel/vdso/built-in.a'.
The following diff works for me and it appears to build and boot in QEMU
without any issues. However, the errors on 5.10 still persist, I've commented
on GitHub for now.
Cheers,
Nathan
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index fa60e8241e42..f8cb9144a284 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
endif
# Build rules
-targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
+targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
-obj-y += vdso.o vdso-syms.o
+obj-y += vdso.o
CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
# Disable -pg to prevent insert call site