2021-08-02 03:01:35

by Guenter Roeck

[permalink] [raw]
Subject: [PATCH] spi: mediatek: Fix fifo transfer

Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that
fifo RX mode was never handled, and adds the presumably missing code
to the FIFO transfer function. However, the claim that receive data
was not handled is incorrect. It was handled as part of interrupt
handling after the transfer was complete. The code added with the above
mentioned commit reads data from the receive FIFO before the transfer
is started, which is wrong. This results in an actual transfer error
on a Hayato Chromebook.

Remove the code trying to handle receive data before the transfer is
started to fix the problem.

Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode")
Cc: Peter Hess <[email protected]>
Cc: Frank Wunderlich <[email protected]>
Cc: Tzung-Bi Shih <[email protected]>
Cc: Hsin-Yi Wang <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
---
drivers/spi/spi-mt65xx.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 68dca8ceb3ad..7914255521c3 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -426,24 +426,15 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
mtk_spi_prepare_transfer(master, xfer);
mtk_spi_setup_packet(master);

- cnt = xfer->len / 4;
- if (xfer->tx_buf)
+ if (xfer->tx_buf) {
+ cnt = xfer->len / 4;
iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
-
- if (xfer->rx_buf)
- ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt);
-
- remainder = xfer->len % 4;
- if (remainder > 0) {
- reg_val = 0;
- if (xfer->tx_buf) {
+ remainder = xfer->len % 4;
+ if (remainder > 0) {
+ reg_val = 0;
memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
writel(reg_val, mdata->base + SPI_TX_DATA_REG);
}
- if (xfer->rx_buf) {
- reg_val = readl(mdata->base + SPI_RX_DATA_REG);
- memcpy(xfer->rx_buf + (cnt * 4), &reg_val, remainder);
- }
}

mtk_spi_enable_transfer(master);
--
2.25.1



2021-08-02 03:28:11

by Tzung-Bi Shih

[permalink] [raw]
Subject: Re: [PATCH] spi: mediatek: Fix fifo transfer

On Sun, Aug 01, 2021 at 08:00:23PM -0700, Guenter Roeck wrote:
> Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode")
> Cc: Peter Hess <[email protected]>
> Cc: Frank Wunderlich <[email protected]>
> Cc: Tzung-Bi Shih <[email protected]>
> Cc: Hsin-Yi Wang <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>

Tested-by: Tzung-Bi Shih <[email protected]>

2021-08-02 03:44:01

by Hsin-Yi Wang

[permalink] [raw]
Subject: Re: [PATCH] spi: mediatek: Fix fifo transfer

On Mon, Aug 2, 2021 at 11:27 AM Tzung-Bi Shih <[email protected]> wrote:
>
> On Sun, Aug 01, 2021 at 08:00:23PM -0700, Guenter Roeck wrote:
> > Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode")
> > Cc: Peter Hess <[email protected]>
> > Cc: Frank Wunderlich <[email protected]>
> > Cc: Tzung-Bi Shih <[email protected]>
> > Cc: Hsin-Yi Wang <[email protected]>
> > Signed-off-by: Guenter Roeck <[email protected]>
>
> Tested-by: Tzung-Bi Shih <[email protected]>
Tested-by: Hsin-Yi Wang <[email protected]>

tested on a mt8183 device.
>
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

2021-08-02 14:17:25

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH] spi: mediatek: Fix fifo transfer

On 8/1/21 8:00 PM, Guenter Roeck wrote:
> Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that
> fifo RX mode was never handled, and adds the presumably missing code
> to the FIFO transfer function. However, the claim that receive data
> was not handled is incorrect. It was handled as part of interrupt
> handling after the transfer was complete. The code added with the above
> mentioned commit reads data from the receive FIFO before the transfer
> is started, which is wrong. This results in an actual transfer error
> on a Hayato Chromebook.
>
> Remove the code trying to handle receive data before the transfer is
> started to fix the problem.
>
> Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode")
> Cc: Peter Hess <[email protected]>
> Cc: Frank Wunderlich <[email protected]>
> Cc: Tzung-Bi Shih <[email protected]>
> Cc: Hsin-Yi Wang <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
> ---

I should have added here: If this patch isn't acceptable for some reason,
commit 3a70dd2d0503 should be reverted because it is obviously wrong
and introduces a severe regression.

Thanks,
Guenter

> drivers/spi/spi-mt65xx.c | 19 +++++--------------
> 1 file changed, 5 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 68dca8ceb3ad..7914255521c3 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -426,24 +426,15 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
> mtk_spi_prepare_transfer(master, xfer);
> mtk_spi_setup_packet(master);
>
> - cnt = xfer->len / 4;
> - if (xfer->tx_buf)
> + if (xfer->tx_buf) {
> + cnt = xfer->len / 4;
> iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt);
> -
> - if (xfer->rx_buf)
> - ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt);
> -
> - remainder = xfer->len % 4;
> - if (remainder > 0) {
> - reg_val = 0;
> - if (xfer->tx_buf) {
> + remainder = xfer->len % 4;
> + if (remainder > 0) {
> + reg_val = 0;
> memcpy(&reg_val, xfer->tx_buf + (cnt * 4), remainder);
> writel(reg_val, mdata->base + SPI_TX_DATA_REG);
> }
> - if (xfer->rx_buf) {
> - reg_val = readl(mdata->base + SPI_RX_DATA_REG);
> - memcpy(xfer->rx_buf + (cnt * 4), &reg_val, remainder);
> - }
> }
>
> mtk_spi_enable_transfer(master);
>


2021-08-03 22:42:42

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH] spi: mediatek: Fix fifo transfer

On Sun, 1 Aug 2021 20:00:23 -0700, Guenter Roeck wrote:
> Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that
> fifo RX mode was never handled, and adds the presumably missing code
> to the FIFO transfer function. However, the claim that receive data
> was not handled is incorrect. It was handled as part of interrupt
> handling after the transfer was complete. The code added with the above
> mentioned commit reads data from the receive FIFO before the transfer
> is started, which is wrong. This results in an actual transfer error
> on a Hayato Chromebook.
>
> [...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: mediatek: Fix fifo transfer
commit: 0d5c3954b35eddff0da0436c31e8d721eceb7dc2

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark