Currently, the asan-stack parameter is only passed along if
CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
be defined in Kconfig so that the value can be checked. In RISC-V's
case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
error: stack frame size (14400) exceeds limit (2048) in function
'lb035q02_connect' [-Werror,-Wframe-larger-than]
static int lb035q02_connect(struct omap_dss_device *dssdev)
^
1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to
the compiler so that these warnings do not happen when
CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453
References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
Signed-off-by: Nathan Chancellor <[email protected]>
---
scripts/Makefile.kasan | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
index 801c415bac59..b9e94c5e7097 100644
--- a/scripts/Makefile.kasan
+++ b/scripts/Makefile.kasan
@@ -33,10 +33,11 @@ else
CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
$(call cc-param,asan-globals=1) \
$(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
- $(call cc-param,asan-stack=$(stack_enable)) \
$(call cc-param,asan-instrument-allocas=1)
endif
+CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable))
+
endif # CONFIG_KASAN_GENERIC
ifdef CONFIG_KASAN_SW_TAGS
base-commit: 4057525736b159bd456732d11270af2cc49ec21f
--
2.33.0.514.g99c99ed825
On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
> Currently, the asan-stack parameter is only passed along if
> CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
> be defined in Kconfig so that the value can be checked. In RISC-V's
> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
> asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
> is disabled, resulting in large stack warnings with allmodconfig:
>
> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> error: stack frame size (14400) exceeds limit (2048) in function
> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> static int lb035q02_connect(struct omap_dss_device *dssdev)
> ^
> 1 error generated.
>
> Ensure that the value of CONFIG_KASAN_STACK is always passed along to
> the compiler so that these warnings do not happen when
> CONFIG_KASAN_STACK is disabled.
>
> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
> Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
[ Which tree are you planning to take it through? ]
Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
comment (copied from arm64). Did RISC-V just forget to copy over the
Kconfig option?
> ---
> scripts/Makefile.kasan | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
> index 801c415bac59..b9e94c5e7097 100644
> --- a/scripts/Makefile.kasan
> +++ b/scripts/Makefile.kasan
> @@ -33,10 +33,11 @@ else
> CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
> $(call cc-param,asan-globals=1) \
> $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
> - $(call cc-param,asan-stack=$(stack_enable)) \
> $(call cc-param,asan-instrument-allocas=1)
> endif
>
> +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable))
> +
> endif # CONFIG_KASAN_GENERIC
>
> ifdef CONFIG_KASAN_SW_TAGS
>
> base-commit: 4057525736b159bd456732d11270af2cc49ec21f
> --
> 2.33.0.514.g99c99ed825
>
>
On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
> > Currently, the asan-stack parameter is only passed along if
> > CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
> > be defined in Kconfig so that the value can be checked. In RISC-V's
> > case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
> > asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
> > is disabled, resulting in large stack warnings with allmodconfig:
> >
> > drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> > error: stack frame size (14400) exceeds limit (2048) in function
> > 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> > static int lb035q02_connect(struct omap_dss_device *dssdev)
> > ^
> > 1 error generated.
> >
> > Ensure that the value of CONFIG_KASAN_STACK is always passed along to
> > the compiler so that these warnings do not happen when
> > CONFIG_KASAN_STACK is disabled.
> >
> > Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> > References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
> > Signed-off-by: Nathan Chancellor <[email protected]>
>
> Reviewed-by: Marco Elver <[email protected]>
Thanks!
> [ Which tree are you planning to take it through? ]
Gah, I was intending for it to go through -mm, then I cc'd neither
Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
grab it from LKML?
> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
> comment (copied from arm64). Did RISC-V just forget to copy over the
> Kconfig option?
I do see it defined in that file as well but you are right that they did
not copy the Kconfig logic, even though it was present in the tree when
RISC-V KASAN was implemented. Perhaps they should so that they get
access to the other flags in the "else" branch?
> > ---
> > scripts/Makefile.kasan | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
> > index 801c415bac59..b9e94c5e7097 100644
> > --- a/scripts/Makefile.kasan
> > +++ b/scripts/Makefile.kasan
> > @@ -33,10 +33,11 @@ else
> > CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
> > $(call cc-param,asan-globals=1) \
> > $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
> > - $(call cc-param,asan-stack=$(stack_enable)) \
> > $(call cc-param,asan-instrument-allocas=1)
> > endif
> >
> > +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable))
> > +
> > endif # CONFIG_KASAN_GENERIC
> >
> > ifdef CONFIG_KASAN_SW_TAGS
> >
> > base-commit: 4057525736b159bd456732d11270af2cc49ec21f
> > --
> > 2.33.0.514.g99c99ed825
> >
> >
On Wed, Sep 22, 2021 at 10:55 PM Nathan Chancellor <[email protected]> wrote:
>
> Currently, the asan-stack parameter is only passed along if
> CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
> be defined in Kconfig so that the value can be checked. In RISC-V's
> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
> asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
> is disabled, resulting in large stack warnings with allmodconfig:
>
> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> error: stack frame size (14400) exceeds limit (2048) in function
> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> static int lb035q02_connect(struct omap_dss_device *dssdev)
> ^
> 1 error generated.
>
> Ensure that the value of CONFIG_KASAN_STACK is always passed along to
> the compiler so that these warnings do not happen when
> CONFIG_KASAN_STACK is disabled.
>
> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
> Signed-off-by: Nathan Chancellor <[email protected]>
> ---
> scripts/Makefile.kasan | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
> index 801c415bac59..b9e94c5e7097 100644
> --- a/scripts/Makefile.kasan
> +++ b/scripts/Makefile.kasan
> @@ -33,10 +33,11 @@ else
> CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
> $(call cc-param,asan-globals=1) \
> $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
> - $(call cc-param,asan-stack=$(stack_enable)) \
> $(call cc-param,asan-instrument-allocas=1)
> endif
This part of code always looked weird to me.
Shouldn't we be able to pull all these options out of the else section?
Then, the code structure would make sense: first, try applying
KASAN_SHADOW_OFFSET; if failed, use CFLAGS_KASAN_MINIMAL; and then try
applying all these options one by one.
> +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable))
> +
> endif # CONFIG_KASAN_GENERIC
>
> ifdef CONFIG_KASAN_SW_TAGS
>
> base-commit: 4057525736b159bd456732d11270af2cc49ec21f
> --
> 2.33.0.514.g99c99ed825
>
On Sun, Oct 03, 2021 at 08:04:53PM +0200, Andrey Konovalov wrote:
> On Wed, Sep 22, 2021 at 10:55 PM Nathan Chancellor <[email protected]> wrote:
> >
> > Currently, the asan-stack parameter is only passed along if
> > CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
> > be defined in Kconfig so that the value can be checked. In RISC-V's
> > case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
> > asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
> > is disabled, resulting in large stack warnings with allmodconfig:
> >
> > drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> > error: stack frame size (14400) exceeds limit (2048) in function
> > 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> > static int lb035q02_connect(struct omap_dss_device *dssdev)
> > ^
> > 1 error generated.
> >
> > Ensure that the value of CONFIG_KASAN_STACK is always passed along to
> > the compiler so that these warnings do not happen when
> > CONFIG_KASAN_STACK is disabled.
> >
> > Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> > References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
> > Signed-off-by: Nathan Chancellor <[email protected]>
> > ---
> > scripts/Makefile.kasan | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
> > index 801c415bac59..b9e94c5e7097 100644
> > --- a/scripts/Makefile.kasan
> > +++ b/scripts/Makefile.kasan
> > @@ -33,10 +33,11 @@ else
> > CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
> > $(call cc-param,asan-globals=1) \
> > $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
> > - $(call cc-param,asan-stack=$(stack_enable)) \
> > $(call cc-param,asan-instrument-allocas=1)
> > endif
>
> This part of code always looked weird to me.
>
> Shouldn't we be able to pull all these options out of the else section?
>
> Then, the code structure would make sense: first, try applying
> KASAN_SHADOW_OFFSET; if failed, use CFLAGS_KASAN_MINIMAL; and then try
> applying all these options one by one.
Prior to commit 1a69e7ce8391 ("kasan/Makefile: support LLVM style asan
parameters"), all the flags were run under one cc-option, meaning that
if $(KASAN_SHADOW_OFFSET) was not set, the whole call would fail.
However, after that commit, it is possible to do this but I was not sure
if that was intentional so I went for the minimal fix.
Cheers,
Nathan
On Wed, Oct 6, 2021 at 4:43 AM Nathan Chancellor <[email protected]> wrote:
>
> > This part of code always looked weird to me.
> >
> > Shouldn't we be able to pull all these options out of the else section?
> >
> > Then, the code structure would make sense: first, try applying
> > KASAN_SHADOW_OFFSET; if failed, use CFLAGS_KASAN_MINIMAL; and then try
> > applying all these options one by one.
>
> Prior to commit 1a69e7ce8391 ("kasan/Makefile: support LLVM style asan
> parameters"), all the flags were run under one cc-option, meaning that
> if $(KASAN_SHADOW_OFFSET) was not set, the whole call would fail.
> However, after that commit, it is possible to do this but I was not sure
> if that was intentional so I went for the minimal fix.
Ack. Filed https://bugzilla.kernel.org/show_bug.cgi?id=214629 for the rest.
Thanks!
On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
>> > Currently, the asan-stack parameter is only passed along if
>> > CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
>> > be defined in Kconfig so that the value can be checked. In RISC-V's
>> > case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
>> > asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
>> > is disabled, resulting in large stack warnings with allmodconfig:
>> >
>> > drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
>> > error: stack frame size (14400) exceeds limit (2048) in function
>> > 'lb035q02_connect' [-Werror,-Wframe-larger-than]
>> > static int lb035q02_connect(struct omap_dss_device *dssdev)
>> > ^
>> > 1 error generated.
>> >
>> > Ensure that the value of CONFIG_KASAN_STACK is always passed along to
>> > the compiler so that these warnings do not happen when
>> > CONFIG_KASAN_STACK is disabled.
>> >
>> > Link: https://github.com/ClangBuiltLinux/linux/issues/1453
>> > References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
>> > Signed-off-by: Nathan Chancellor <[email protected]>
>>
>> Reviewed-by: Marco Elver <[email protected]>
>
> Thanks!
>
>> [ Which tree are you planning to take it through? ]
>
> Gah, I was intending for it to go through -mm, then I cc'd neither
> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
> grab it from LKML?
Acked-by: Palmer Dabbelt <[email protected]>
(assuming you still want it through somewhere else)
>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
>> comment (copied from arm64). Did RISC-V just forget to copy over the
>> Kconfig option?
>
> I do see it defined in that file as well but you are right that they did
> not copy the Kconfig logic, even though it was present in the tree when
> RISC-V KASAN was implemented. Perhaps they should so that they get
> access to the other flags in the "else" branch?
Ya, looks like we just screwed this up. I'm seeing some warnings like
cc1: warning: ‘-fsanitize=kernel-address’ with stack protection is not supported without ‘-fasan-shadow-offset=’ for this target
which is how I ended up here, I'm assuming that's what you're talking
about here? LMK if you were planning on sending along a fix or if you
want me to go figure it out.
>
>> > ---
>> > scripts/Makefile.kasan | 3 ++-
>> > 1 file changed, 2 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
>> > index 801c415bac59..b9e94c5e7097 100644
>> > --- a/scripts/Makefile.kasan
>> > +++ b/scripts/Makefile.kasan
>> > @@ -33,10 +33,11 @@ else
>> > CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \
>> > $(call cc-param,asan-globals=1) \
>> > $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \
>> > - $(call cc-param,asan-stack=$(stack_enable)) \
>> > $(call cc-param,asan-instrument-allocas=1)
>> > endif
>> >
>> > +CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable))
>> > +
>> > endif # CONFIG_KASAN_GENERIC
>> >
>> > ifdef CONFIG_KASAN_SW_TAGS
>> >
>> > base-commit: 4057525736b159bd456732d11270af2cc49ec21f
>> > --
>> > 2.33.0.514.g99c99ed825
>> >
>> >
On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
> > On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
> > > On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
> > > > Currently, the asan-stack parameter is only passed along if
> > > > CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
> > > > be defined in Kconfig so that the value can be checked. In RISC-V's
> > > > case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
> > > > asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
> > > > is disabled, resulting in large stack warnings with allmodconfig:
> > > >
> > > > drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> > > > error: stack frame size (14400) exceeds limit (2048) in function
> > > > 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> > > > static int lb035q02_connect(struct omap_dss_device *dssdev)
> > > > ^
> > > > 1 error generated.
> > > >
> > > > Ensure that the value of CONFIG_KASAN_STACK is always passed along to
> > > > the compiler so that these warnings do not happen when
> > > > CONFIG_KASAN_STACK is disabled.
> > > >
> > > > Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> > > > References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
> > > > Signed-off-by: Nathan Chancellor <[email protected]>
> > >
> > > Reviewed-by: Marco Elver <[email protected]>
> >
> > Thanks!
> >
> > > [ Which tree are you planning to take it through? ]
> >
> > Gah, I was intending for it to go through -mm, then I cc'd neither
> > Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
> > grab it from LKML?
>
> Acked-by: Palmer Dabbelt <[email protected]>
>
> (assuming you still want it through somewhere else)
Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
respect CONFIG_KASAN_STACK").
> > > Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
> > > comment (copied from arm64). Did RISC-V just forget to copy over the
> > > Kconfig option?
> >
> > I do see it defined in that file as well but you are right that they did
> > not copy the Kconfig logic, even though it was present in the tree when
> > RISC-V KASAN was implemented. Perhaps they should so that they get
> > access to the other flags in the "else" branch?
>
> Ya, looks like we just screwed this up. I'm seeing some warnings like
>
> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection is not supported without ‘-fasan-shadow-offset=’ for this target
Hmmm, I thought I did a GCC build with this change but I must not have
:/
> which is how I ended up here, I'm assuming that's what you're talking about
> here? LMK if you were planning on sending along a fix or if you want me to
> go figure it out.
I took a look at moving the logic into Kconfig like arm64 before sending
this change and I did not really understand it well enough to do so. I
think it would be best if you were able to do that so that nothing gets
messed up.
Cheers,
Nathan
Hi Nathan,
Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
>>>>> Currently, the asan-stack parameter is only passed along if
>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
>>>>> asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
>>>>> is disabled, resulting in large stack warnings with allmodconfig:
>>>>>
>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
>>>>> error: stack frame size (14400) exceeds limit (2048) in function
>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
>>>>> ^
>>>>> 1 error generated.
>>>>>
>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed along to
>>>>> the compiler so that these warnings do not happen when
>>>>> CONFIG_KASAN_STACK is disabled.
>>>>>
>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
>>>>
>>>> Reviewed-by: Marco Elver <[email protected]>
>>>
>>> Thanks!
>>>
>>>> [ Which tree are you planning to take it through? ]
>>>
>>> Gah, I was intending for it to go through -mm, then I cc'd neither
>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
>>> grab it from LKML?
>>
>> Acked-by: Palmer Dabbelt <[email protected]>
>>
>> (assuming you still want it through somewhere else)
>
> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
> respect CONFIG_KASAN_STACK").
>
>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
>>>> Kconfig option?
>>>
>>> I do see it defined in that file as well but you are right that they did
>>> not copy the Kconfig logic, even though it was present in the tree when
>>> RISC-V KASAN was implemented. Perhaps they should so that they get
>>> access to the other flags in the "else" branch?
>>
>> Ya, looks like we just screwed this up. I'm seeing some warnings like
>>
>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection is not supported without ‘-fasan-shadow-offset=’ for this target
>
> Hmmm, I thought I did a GCC build with this change but I must not have
> :/
>
>> which is how I ended up here, I'm assuming that's what you're talking about
>> here? LMK if you were planning on sending along a fix or if you want me to
>> go figure it out.
>
> I took a look at moving the logic into Kconfig like arm64 before sending
> this change and I did not really understand it well enough to do so. I
> think it would be best if you were able to do that so that nothing gets
> messed up.
>
I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
Thanks,
Alex
> Cheers,
> Nathan
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
On 10/14/21 8:31 PM, Alex Ghiti wrote:
> Hi Nathan,
>
> Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
>> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
>>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
>>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
>>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor
>>>>> <[email protected]> wrote:
>>>>>> Currently, the asan-stack parameter is only passed along if
>>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires
>>>>>> KASAN_SHADOW_OFFSET to
>>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
>>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means
>>>>>> that
>>>>>> asan-stack does not get disabled with clang even when
>>>>>> CONFIG_KASAN_STACK
>>>>>> is disabled, resulting in large stack warnings with allmodconfig:
>>>>>>
>>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
>>>>>>
>>>>>> error: stack frame size (14400) exceeds limit (2048) in function
>>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
>>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
>>>>>> ^
>>>>>> 1 error generated.
>>>>>>
>>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed
>>>>>> along to
>>>>>> the compiler so that these warnings do not happen when
>>>>>> CONFIG_KASAN_STACK is disabled.
>>>>>>
>>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
>>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8
>>>>>> and earlier")
>>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
>>>>>
>>>>> Reviewed-by: Marco Elver <[email protected]>
>>>>
>>>> Thanks!
>>>>
>>>>> [ Which tree are you planning to take it through? ]
>>>>
>>>> Gah, I was intending for it to go through -mm, then I cc'd neither
>>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
>>>> grab it from LKML?
>>>
>>> Acked-by: Palmer Dabbelt <[email protected]>
>>>
>>> (assuming you still want it through somewhere else)
>>
>> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
>> respect CONFIG_KASAN_STACK").
>>
>>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
>>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
>>>>> Kconfig option?
>>>>
>>>> I do see it defined in that file as well but you are right that
>>>> they did
>>>> not copy the Kconfig logic, even though it was present in the tree
>>>> when
>>>> RISC-V KASAN was implemented. Perhaps they should so that they get
>>>> access to the other flags in the "else" branch?
>>>
>>> Ya, looks like we just screwed this up. I'm seeing some warnings like
>>>
>>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection
>>> is not supported without ‘-fasan-shadow-offset=’ for this target
>>
>> Hmmm, I thought I did a GCC build with this change but I must not have
>> :/
>>
>>> which is how I ended up here, I'm assuming that's what you're
>>> talking about
>>> here? LMK if you were planning on sending along a fix or if you
>>> want me to
>>> go figure it out.
>>
>> I took a look at moving the logic into Kconfig like arm64 before sending
>> this change and I did not really understand it well enough to do so. I
>> think it would be best if you were able to do that so that nothing gets
>> messed up.
>>
>
> I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
>
Adding KASAN_SHADOW_OFFSET config makes kasan kernel fails to boot.
It receives a *write* fault at the beginning of a memblock_alloc
function while populating the kernel shadow memory: the trap address is
in the kasan shadow virtual address range and this corresponds to a
kernel address in init_stack. The question is: how do I populate the
stack shadow mapping without using memblock API? It's weird, I don't
find anything on other architectures.
And just a short note: I have realized this will break with the sv48
patchset as we decide at runtime the address space width and the kasan
shadow start address is different between sv39 and sv48. I will have to
do like x86 and move the kasan shadow start at the end of the address
space so that it is the same for both sv39 and sv48.
Thanks,
Alex
> Thanks,
>
> Alex
>
>> Cheers,
>> Nathan
>>
>> _______________________________________________
>> linux-riscv mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
On Thu, 14 Oct 2021 11:31:00 PDT (-0700), [email protected] wrote:
> Hi Nathan,
>
> Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
>> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
>>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
>>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
>>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor <[email protected]> wrote:
>>>>>> Currently, the asan-stack parameter is only passed along if
>>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to
>>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
>>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that
>>>>>> asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK
>>>>>> is disabled, resulting in large stack warnings with allmodconfig:
>>>>>>
>>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
>>>>>> error: stack frame size (14400) exceeds limit (2048) in function
>>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
>>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
>>>>>> ^
>>>>>> 1 error generated.
>>>>>>
>>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed along to
>>>>>> the compiler so that these warnings do not happen when
>>>>>> CONFIG_KASAN_STACK is disabled.
>>>>>>
>>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
>>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier")
>>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
>>>>>
>>>>> Reviewed-by: Marco Elver <[email protected]>
>>>>
>>>> Thanks!
>>>>
>>>>> [ Which tree are you planning to take it through? ]
>>>>
>>>> Gah, I was intending for it to go through -mm, then I cc'd neither
>>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
>>>> grab it from LKML?
>>>
>>> Acked-by: Palmer Dabbelt <[email protected]>
>>>
>>> (assuming you still want it through somewhere else)
>>
>> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
>> respect CONFIG_KASAN_STACK").
>>
>>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
>>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
>>>>> Kconfig option?
>>>>
>>>> I do see it defined in that file as well but you are right that they did
>>>> not copy the Kconfig logic, even though it was present in the tree when
>>>> RISC-V KASAN was implemented. Perhaps they should so that they get
>>>> access to the other flags in the "else" branch?
>>>
>>> Ya, looks like we just screwed this up. I'm seeing some warnings like
>>>
>>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection is not supported without ‘-fasan-shadow-offset=’ for this target
>>
>> Hmmm, I thought I did a GCC build with this change but I must not have
>> :/
>>
>>> which is how I ended up here, I'm assuming that's what you're talking about
>>> here? LMK if you were planning on sending along a fix or if you want me to
>>> go figure it out.
>>
>> I took a look at moving the logic into Kconfig like arm64 before sending
>> this change and I did not really understand it well enough to do so. I
>> think it would be best if you were able to do that so that nothing gets
>> messed up.
>>
>
> I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
Any luck? I tried what I think is the simple way to do it last week,
(merging with Linus' tree is turning these warnings into build
failures) but it's hanging on boot. Not sure what's going on
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c3f3fd583e04..d3998b4a45f1 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -212,6 +212,12 @@ config PGTABLE_LEVELS
config LOCKDEP_SUPPORT
def_bool y
+config KASAN_SHADOW_OFFSET
+ hex
+ depends on KASAN_GENERIC
+ default 0xdfffffc800000000 if 64BIT
+ default 0xffffffff if 32BIT
+
source "arch/riscv/Kconfig.socs"
source "arch/riscv/Kconfig.erratas"
diff --git a/arch/riscv/include/asm/kasan.h b/arch/riscv/include/asm/kasan.h
index a2b3d9cdbc86..b00f503ec124 100644
--- a/arch/riscv/include/asm/kasan.h
+++ b/arch/riscv/include/asm/kasan.h
@@ -30,8 +30,7 @@
#define KASAN_SHADOW_SIZE (UL(1) << ((CONFIG_VA_BITS - 1) - KASAN_SHADOW_SCALE_SHIFT))
#define KASAN_SHADOW_START KERN_VIRT_START
#define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
-#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << \
- (64 - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
void kasan_init(void);
asmlinkage void kasan_early_init(void);
>
> Thanks,
>
> Alex
>
>> Cheers,
>> Nathan
>>
>> _______________________________________________
>> linux-riscv mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
Hi,
On Fri, Oct 15, 2021 at 3:08 PM Alexandre ghiti <[email protected]> wrote:
>
> On 10/14/21 8:31 PM, Alex Ghiti wrote:
> > Hi Nathan,
> >
> > Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
> >> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
> >>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
> >>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
> >>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor
> >>>>> <[email protected]> wrote:
> >>>>>> Currently, the asan-stack parameter is only passed along if
> >>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires
> >>>>>> KASAN_SHADOW_OFFSET to
> >>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
> >>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means
> >>>>>> that
> >>>>>> asan-stack does not get disabled with clang even when
> >>>>>> CONFIG_KASAN_STACK
> >>>>>> is disabled, resulting in large stack warnings with allmodconfig:
> >>>>>>
> >>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> >>>>>>
> >>>>>> error: stack frame size (14400) exceeds limit (2048) in function
> >>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> >>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
> >>>>>> ^
> >>>>>> 1 error generated.
> >>>>>>
> >>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed
> >>>>>> along to
> >>>>>> the compiler so that these warnings do not happen when
> >>>>>> CONFIG_KASAN_STACK is disabled.
> >>>>>>
> >>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> >>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8
> >>>>>> and earlier")
> >>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
> >>>>>
> >>>>> Reviewed-by: Marco Elver <[email protected]>
> >>>>
> >>>> Thanks!
> >>>>
> >>>>> [ Which tree are you planning to take it through? ]
> >>>>
> >>>> Gah, I was intending for it to go through -mm, then I cc'd neither
> >>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
> >>>> grab it from LKML?
> >>>
> >>> Acked-by: Palmer Dabbelt <[email protected]>
> >>>
> >>> (assuming you still want it through somewhere else)
> >>
> >> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
> >> respect CONFIG_KASAN_STACK").
> >>
> >>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
> >>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
> >>>>> Kconfig option?
> >>>>
> >>>> I do see it defined in that file as well but you are right that
> >>>> they did
> >>>> not copy the Kconfig logic, even though it was present in the tree
> >>>> when
> >>>> RISC-V KASAN was implemented. Perhaps they should so that they get
> >>>> access to the other flags in the "else" branch?
> >>>
> >>> Ya, looks like we just screwed this up. I'm seeing some warnings like
> >>>
> >>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection
> >>> is not supported without ‘-fasan-shadow-offset=’ for this target
> >>
> >> Hmmm, I thought I did a GCC build with this change but I must not have
> >> :/
> >>
> >>> which is how I ended up here, I'm assuming that's what you're
> >>> talking about
> >>> here? LMK if you were planning on sending along a fix or if you
> >>> want me to
> >>> go figure it out.
> >>
> >> I took a look at moving the logic into Kconfig like arm64 before sending
> >> this change and I did not really understand it well enough to do so. I
> >> think it would be best if you were able to do that so that nothing gets
> >> messed up.
> >>
> >
> > I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
> >
>
> Adding KASAN_SHADOW_OFFSET config makes kasan kernel fails to boot.
> It receives a *write* fault at the beginning of a memblock_alloc
> function while populating the kernel shadow memory: the trap address is
> in the kasan shadow virtual address range and this corresponds to a
> kernel address in init_stack. The question is: how do I populate the
> stack shadow mapping without using memblock API? It's weird, I don't
> find anything on other architectures.
@kasan: Any idea what we are doing wrong in riscv to encounter the
above situation?
Thanks,
Alex
>
> And just a short note: I have realized this will break with the sv48
> patchset as we decide at runtime the address space width and the kasan
> shadow start address is different between sv39 and sv48. I will have to
> do like x86 and move the kasan shadow start at the end of the address
> space so that it is the same for both sv39 and sv48.
>
> Thanks,
>
> Alex
>
>
> > Thanks,
> >
> > Alex
> >
> >> Cheers,
> >> Nathan
> >>
> >> _______________________________________________
> >> linux-riscv mailing list
> >> [email protected]
> >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>
> >
> > _______________________________________________
> > linux-riscv mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
On Tue, 26 Oct 2021 at 06:39, Alexandre Ghiti
<[email protected]> wrote:
>
> Hi,
>
> On Fri, Oct 15, 2021 at 3:08 PM Alexandre ghiti <[email protected]> wrote:
> >
> > On 10/14/21 8:31 PM, Alex Ghiti wrote:
> > > Hi Nathan,
> > >
> > > Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
> > >> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
> > >>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
> > >>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
> > >>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor
> > >>>>> <[email protected]> wrote:
> > >>>>>> Currently, the asan-stack parameter is only passed along if
> > >>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires
> > >>>>>> KASAN_SHADOW_OFFSET to
> > >>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
> > >>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means
> > >>>>>> that
> > >>>>>> asan-stack does not get disabled with clang even when
> > >>>>>> CONFIG_KASAN_STACK
> > >>>>>> is disabled, resulting in large stack warnings with allmodconfig:
> > >>>>>>
> > >>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> > >>>>>>
> > >>>>>> error: stack frame size (14400) exceeds limit (2048) in function
> > >>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> > >>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
> > >>>>>> ^
> > >>>>>> 1 error generated.
> > >>>>>>
> > >>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed
> > >>>>>> along to
> > >>>>>> the compiler so that these warnings do not happen when
> > >>>>>> CONFIG_KASAN_STACK is disabled.
> > >>>>>>
> > >>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> > >>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8
> > >>>>>> and earlier")
> > >>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
> > >>>>>
> > >>>>> Reviewed-by: Marco Elver <[email protected]>
> > >>>>
> > >>>> Thanks!
> > >>>>
> > >>>>> [ Which tree are you planning to take it through? ]
> > >>>>
> > >>>> Gah, I was intending for it to go through -mm, then I cc'd neither
> > >>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
> > >>>> grab it from LKML?
> > >>>
> > >>> Acked-by: Palmer Dabbelt <[email protected]>
> > >>>
> > >>> (assuming you still want it through somewhere else)
> > >>
> > >> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
> > >> respect CONFIG_KASAN_STACK").
> > >>
> > >>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
> > >>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
> > >>>>> Kconfig option?
> > >>>>
> > >>>> I do see it defined in that file as well but you are right that
> > >>>> they did
> > >>>> not copy the Kconfig logic, even though it was present in the tree
> > >>>> when
> > >>>> RISC-V KASAN was implemented. Perhaps they should so that they get
> > >>>> access to the other flags in the "else" branch?
> > >>>
> > >>> Ya, looks like we just screwed this up. I'm seeing some warnings like
> > >>>
> > >>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection
> > >>> is not supported without ‘-fasan-shadow-offset=’ for this target
> > >>
> > >> Hmmm, I thought I did a GCC build with this change but I must not have
> > >> :/
> > >>
> > >>> which is how I ended up here, I'm assuming that's what you're
> > >>> talking about
> > >>> here? LMK if you were planning on sending along a fix or if you
> > >>> want me to
> > >>> go figure it out.
> > >>
> > >> I took a look at moving the logic into Kconfig like arm64 before sending
> > >> this change and I did not really understand it well enough to do so. I
> > >> think it would be best if you were able to do that so that nothing gets
> > >> messed up.
> > >>
> > >
> > > I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
> > >
> >
> > Adding KASAN_SHADOW_OFFSET config makes kasan kernel fails to boot.
> > It receives a *write* fault at the beginning of a memblock_alloc
> > function while populating the kernel shadow memory: the trap address is
> > in the kasan shadow virtual address range and this corresponds to a
> > kernel address in init_stack. The question is: how do I populate the
> > stack shadow mapping without using memblock API? It's weird, I don't
> > find anything on other architectures.
>
> @kasan: Any idea what we are doing wrong in riscv to encounter the
> above situation?
Hi Alex, Palmer,
The patch changes the definition of the KASAN_SHADOW_OFFSET const.
Does it's value change as a result or not? Have you tried to print it
before/after?
If value does not change, then this is more mysterious. If it changes,
then there lots of possible explanations (points to unmapped region,
overlaps with something), but we need to know values before/after to
answer this.
> Thanks,
>
> Alex
>
> >
> > And just a short note: I have realized this will break with the sv48
> > patchset as we decide at runtime the address space width and the kasan
> > shadow start address is different between sv39 and sv48. I will have to
> > do like x86 and move the kasan shadow start at the end of the address
> > space so that it is the same for both sv39 and sv48.
> >
> > Thanks,
> >
> > Alex
> >
> >
> > > Thanks,
> > >
> > > Alex
> > >
> > >> Cheers,
> > >> Nathan
> > >>
> > >> _______________________________________________
> > >> linux-riscv mailing list
> > >> [email protected]
> > >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >>
> > >
> > > _______________________________________________
> > > linux-riscv mailing list
> > > [email protected]
> > > http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
> > _______________________________________________
> > linux-riscv mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
On Tue, Oct 26, 2021 at 6:48 AM Dmitry Vyukov <[email protected]> wrote:
>
> On Tue, 26 Oct 2021 at 06:39, Alexandre Ghiti
> <[email protected]> wrote:
> >
> > Hi,
> >
> > On Fri, Oct 15, 2021 at 3:08 PM Alexandre ghiti <[email protected]> wrote:
> > >
> > > On 10/14/21 8:31 PM, Alex Ghiti wrote:
> > > > Hi Nathan,
> > > >
> > > > Le 14/10/2021 à 18:55, Nathan Chancellor a écrit :
> > > >> On Fri, Oct 08, 2021 at 11:46:55AM -0700, Palmer Dabbelt wrote:
> > > >>> On Thu, 23 Sep 2021 07:59:46 PDT (-0700), [email protected] wrote:
> > > >>>> On Thu, Sep 23, 2021 at 12:07:17PM +0200, Marco Elver wrote:
> > > >>>>> On Wed, 22 Sept 2021 at 22:55, Nathan Chancellor
> > > >>>>> <[email protected]> wrote:
> > > >>>>>> Currently, the asan-stack parameter is only passed along if
> > > >>>>>> CFLAGS_KASAN_SHADOW is not empty, which requires
> > > >>>>>> KASAN_SHADOW_OFFSET to
> > > >>>>>> be defined in Kconfig so that the value can be checked. In RISC-V's
> > > >>>>>> case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means
> > > >>>>>> that
> > > >>>>>> asan-stack does not get disabled with clang even when
> > > >>>>>> CONFIG_KASAN_STACK
> > > >>>>>> is disabled, resulting in large stack warnings with allmodconfig:
> > > >>>>>>
> > > >>>>>> drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12:
> > > >>>>>>
> > > >>>>>> error: stack frame size (14400) exceeds limit (2048) in function
> > > >>>>>> 'lb035q02_connect' [-Werror,-Wframe-larger-than]
> > > >>>>>> static int lb035q02_connect(struct omap_dss_device *dssdev)
> > > >>>>>> ^
> > > >>>>>> 1 error generated.
> > > >>>>>>
> > > >>>>>> Ensure that the value of CONFIG_KASAN_STACK is always passed
> > > >>>>>> along to
> > > >>>>>> the compiler so that these warnings do not happen when
> > > >>>>>> CONFIG_KASAN_STACK is disabled.
> > > >>>>>>
> > > >>>>>> Link: https://github.com/ClangBuiltLinux/linux/issues/1453
> > > >>>>>> References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8
> > > >>>>>> and earlier")
> > > >>>>>> Signed-off-by: Nathan Chancellor <[email protected]>
> > > >>>>>
> > > >>>>> Reviewed-by: Marco Elver <[email protected]>
> > > >>>>
> > > >>>> Thanks!
> > > >>>>
> > > >>>>> [ Which tree are you planning to take it through? ]
> > > >>>>
> > > >>>> Gah, I was intending for it to go through -mm, then I cc'd neither
> > > >>>> Andrew nor linux-mm... :/ Andrew, do you want me to resend or can you
> > > >>>> grab it from LKML?
> > > >>>
> > > >>> Acked-by: Palmer Dabbelt <[email protected]>
> > > >>>
> > > >>> (assuming you still want it through somewhere else)
> > > >>
> > > >> Thanks, it is now in mainline as commit 19532869feb9 ("kasan: always
> > > >> respect CONFIG_KASAN_STACK").
> > > >>
> > > >>>>> Note, arch/riscv/include/asm/kasan.h mentions KASAN_SHADOW_OFFSET in
> > > >>>>> comment (copied from arm64). Did RISC-V just forget to copy over the
> > > >>>>> Kconfig option?
> > > >>>>
> > > >>>> I do see it defined in that file as well but you are right that
> > > >>>> they did
> > > >>>> not copy the Kconfig logic, even though it was present in the tree
> > > >>>> when
> > > >>>> RISC-V KASAN was implemented. Perhaps they should so that they get
> > > >>>> access to the other flags in the "else" branch?
> > > >>>
> > > >>> Ya, looks like we just screwed this up. I'm seeing some warnings like
> > > >>>
> > > >>> cc1: warning: ‘-fsanitize=kernel-address’ with stack protection
> > > >>> is not supported without ‘-fasan-shadow-offset=’ for this target
> > > >>
> > > >> Hmmm, I thought I did a GCC build with this change but I must not have
> > > >> :/
> > > >>
> > > >>> which is how I ended up here, I'm assuming that's what you're
> > > >>> talking about
> > > >>> here? LMK if you were planning on sending along a fix or if you
> > > >>> want me to
> > > >>> go figure it out.
> > > >>
> > > >> I took a look at moving the logic into Kconfig like arm64 before sending
> > > >> this change and I did not really understand it well enough to do so. I
> > > >> think it would be best if you were able to do that so that nothing gets
> > > >> messed up.
> > > >>
> > > >
> > > > I'll do it tomorrow, I'm the last one who touched kasan on riscv :)
> > > >
> > >
> > > Adding KASAN_SHADOW_OFFSET config makes kasan kernel fails to boot.
> > > It receives a *write* fault at the beginning of a memblock_alloc
> > > function while populating the kernel shadow memory: the trap address is
> > > in the kasan shadow virtual address range and this corresponds to a
> > > kernel address in init_stack. The question is: how do I populate the
> > > stack shadow mapping without using memblock API? It's weird, I don't
> > > find anything on other architectures.
> >
> > @kasan: Any idea what we are doing wrong in riscv to encounter the
> > above situation?
>
> Hi Alex, Palmer,
>
> The patch changes the definition of the KASAN_SHADOW_OFFSET const.
> Does it's value change as a result or not? Have you tried to print it
> before/after?
> If value does not change, then this is more mysterious. If it changes,
> then there lots of possible explanations (points to unmapped region,
> overlaps with something), but we need to know values before/after to
So I debugged a bit more what happened here, and actually the culprit
is the call to kasan_populate_early_shadow at the beginning of
kasan_init which write-protects the access to kasan_early_shadow_page
and hence the write fault later when using memblock. I don't see the
point of this call anyway since we populate swapper_pg_dir in
kasan_early_init and then we write-protect the access to
kasan_early_shadow_page at the end of kasan_init.
But that may not be ideal, so I'm open to a better suggestion than
just removing the call to kasan_populate_early_shadow.
Sorry I did not dig further before asking and thanks for your time,
Alex
> answer this.
>
>
> > Thanks,
> >
> > Alex
> >
> > >
> > > And just a short note: I have realized this will break with the sv48
> > > patchset as we decide at runtime the address space width and the kasan
> > > shadow start address is different between sv39 and sv48. I will have to
> > > do like x86 and move the kasan shadow start at the end of the address
> > > space so that it is the same for both sv39 and sv48.
> > >
> > > Thanks,
> > >
> > > Alex
> > >
> > >
> > > > Thanks,
> > > >
> > > > Alex
> > > >
> > > >> Cheers,
> > > >> Nathan
> > > >>
> > > >> _______________________________________________
> > > >> linux-riscv mailing list
> > > >> [email protected]
> > > >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > > >>
> > > >
> > > > _______________________________________________
> > > > linux-riscv mailing list
> > > > [email protected]
> > > > http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >
> > > _______________________________________________
> > > linux-riscv mailing list
> > > [email protected]
> > > http://lists.infradead.org/mailman/listinfo/linux-riscv