When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
Workqueue: events_unbound flush_to_ldisc
pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
pc : slip_unesc+0x80/0x214 [slip]
lr : slip_receive_buf+0x84/0x100 [slip]
sp : ffff80005274bce0
x29: ffff80005274bce0 x28: 0000000000000000
x27: ffff00525626fcc8 x26: ffff800011921078
x25: 0000000000000000 x24: 0000000000000004
x23: ffff00402b4059c0 x22: ffff00402b405940
x21: ffff205d87b81e21 x20: ffff205d87b81b9b
x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
x9 : ffff8000097d7628 x8 : ffff205d87b85e20
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff8000097dc008 x4 : ffff8000097d75a4
x3 : ffff205d87b81e1f x2 : 0000000000000005
x1 : 000000000000005f x0 : ffff00402b405940
Call trace:
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
Kernel panic - not syncing: softlockup: hung tasks
CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
Workqueue: events_unbound flush_to_ldisc
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
SMP: stopping secondary CPUs
In the testcase pty04, there are multple processes and we only pay close attention to the
first three actually. The first process call the write syscall to send data to the pty master
with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
The third process will wait a moment in which the first two processes will do there work and then
it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
master's buffhead to line discipline in a loop until there is no more data left without any on one's
own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
in the flush_to_ldisc while loop to avoid it.
Signed-off-by: Guanghui Feng <[email protected]>
---
drivers/tty/tty_buffer.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd2d915..77b92f9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+ cond_resched();
}
mutex_unlock(&buf->lock);
--
1.8.3.1
Hi Greg,
On 2021/9/30 13:38, Greg KH wrote:
> On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>> which look like this one:
>>
>> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>> Workqueue: events_unbound flush_to_ldisc
>> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
>> pc : slip_unesc+0x80/0x214 [slip]
>> lr : slip_receive_buf+0x84/0x100 [slip]
>> sp : ffff80005274bce0
>> x29: ffff80005274bce0 x28: 0000000000000000
>> x27: ffff00525626fcc8 x26: ffff800011921078
>> x25: 0000000000000000 x24: 0000000000000004
>> x23: ffff00402b4059c0 x22: ffff00402b405940
>> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
>> x19: 0000000000000000 x18: 0000000000000000
>> x17: 0000000000000000 x16: 0000000000000000
>> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
>> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
>> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
>> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
>> x7 : 0000000000000000 x6 : 0000000000000001
>> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
>> x3 : ffff205d87b81e1f x2 : 0000000000000005
>> x1 : 000000000000005f x0 : ffff00402b405940
>> Call trace:
>> slip_unesc+0x80/0x214 [slip]
>> tty_ldisc_receive_buf+0x64/0x80
>> tty_port_default_receive_buf+0x50/0x90
>> flush_to_ldisc+0xbc/0x110
>> process_one_work+0x1d4/0x4b0
>> worker_thread+0x180/0x430
>> kthread+0x11c/0x120
>> Kernel panic - not syncing: softlockup: hung tasks
>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>> Workqueue: events_unbound flush_to_ldisc
>> Call trace:
>> dump_backtrace+0x0/0x1ec
>> show_stack+0x24/0x30
>> dump_stack+0xd0/0x128
>> panic+0x15c/0x374
>> watchdog_timer_fn+0x2b8/0x304
>> __run_hrtimer+0x88/0x2c0
>> __hrtimer_run_queues+0xa4/0x120
>> hrtimer_interrupt+0xfc/0x270
>> arch_timer_handler_phys+0x40/0x50
>> handle_percpu_devid_irq+0x94/0x220
>> __handle_domain_irq+0x88/0xf0
>> gic_handle_irq+0x84/0xfc
>> el1_irq+0xc8/0x180
>> slip_unesc+0x80/0x214 [slip]
>> tty_ldisc_receive_buf+0x64/0x80
>> tty_port_default_receive_buf+0x50/0x90
>> flush_to_ldisc+0xbc/0x110
>> process_one_work+0x1d4/0x4b0
>> worker_thread+0x180/0x430
>> kthread+0x11c/0x120
>> SMP: stopping secondary CPUs
>>
>> In the testcase pty04, there are multple processes and we only pay close attention to the
>> first three actually. The first process call the write syscall to send data to the pty master
>> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
>> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
>> The third process will wait a moment in which the first two processes will do there work and then
>> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
>> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
>> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
>> master's buffhead to line discipline in a loop until there is no more data left without any on one's
>> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
>> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
>> in the flush_to_ldisc while loop to avoid it.
>
> Please properly wrap your changelog text at 72 columns.
>
>
>>
>> Signed-off-by: Guanghui Feng <[email protected]>
>> ---
>> drivers/tty/tty_buffer.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
>> index bd2d915..77b92f9 100644
>> --- a/drivers/tty/tty_buffer.c
>> +++ b/drivers/tty/tty_buffer.c
>> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
>> if (!count)
>> break;
>> head->read += count;
>> + cond_resched();
>
> This is almost never the correct solution for fixing a problem in the
> kernel anymore.
>
> And if it is, it needs to be documented really really well. I think you
> just slowed down the overall throughput of a tty device by adding this
> call, so are you sure you didn't break something?
>
> And why are you not running with a preempt kernel here? What prevents
> that from being enabled to solve issues like this?
For server scenario, we usually select CONFIG_PREEMPT_VOLUNTARY instead
of selecting CONFIG_PREEMPT. So for this stress test case, lots of data
need to receive in the loop in the flush_to_ldisc(), which will block
other threads to be scheduled for a long time on this CPU if no
scheduling check.
For the throughput concern, I think we can change to below code to avoid
impacting the throughput, which means only need rescheduling if
necessary, and also fix the softlockup issue.
+ if (need_resched())
+ cond_resched();
>
> Also, having only one CPU burning through a network workload like this
> seems correct to me, why would you want the CPU to stop handling the
> data being sent to it like this? You have at least 40 other ones to do
> other things here :)
>
> thanks,
>
> greg k-h
>
On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> which look like this one:
>
> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> Workqueue: events_unbound flush_to_ldisc
> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
> pc : slip_unesc+0x80/0x214 [slip]
> lr : slip_receive_buf+0x84/0x100 [slip]
> sp : ffff80005274bce0
> x29: ffff80005274bce0 x28: 0000000000000000
> x27: ffff00525626fcc8 x26: ffff800011921078
> x25: 0000000000000000 x24: 0000000000000004
> x23: ffff00402b4059c0 x22: ffff00402b405940
> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
> x19: 0000000000000000 x18: 0000000000000000
> x17: 0000000000000000 x16: 0000000000000000
> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
> x7 : 0000000000000000 x6 : 0000000000000001
> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
> x3 : ffff205d87b81e1f x2 : 0000000000000005
> x1 : 000000000000005f x0 : ffff00402b405940
> Call trace:
> slip_unesc+0x80/0x214 [slip]
> tty_ldisc_receive_buf+0x64/0x80
> tty_port_default_receive_buf+0x50/0x90
> flush_to_ldisc+0xbc/0x110
> process_one_work+0x1d4/0x4b0
> worker_thread+0x180/0x430
> kthread+0x11c/0x120
> Kernel panic - not syncing: softlockup: hung tasks
> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> Workqueue: events_unbound flush_to_ldisc
> Call trace:
> dump_backtrace+0x0/0x1ec
> show_stack+0x24/0x30
> dump_stack+0xd0/0x128
> panic+0x15c/0x374
> watchdog_timer_fn+0x2b8/0x304
> __run_hrtimer+0x88/0x2c0
> __hrtimer_run_queues+0xa4/0x120
> hrtimer_interrupt+0xfc/0x270
> arch_timer_handler_phys+0x40/0x50
> handle_percpu_devid_irq+0x94/0x220
> __handle_domain_irq+0x88/0xf0
> gic_handle_irq+0x84/0xfc
> el1_irq+0xc8/0x180
> slip_unesc+0x80/0x214 [slip]
> tty_ldisc_receive_buf+0x64/0x80
> tty_port_default_receive_buf+0x50/0x90
> flush_to_ldisc+0xbc/0x110
> process_one_work+0x1d4/0x4b0
> worker_thread+0x180/0x430
> kthread+0x11c/0x120
> SMP: stopping secondary CPUs
>
> In the testcase pty04, there are multple processes and we only pay close attention to the
> first three actually. The first process call the write syscall to send data to the pty master
> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
> The third process will wait a moment in which the first two processes will do there work and then
> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
> master's buffhead to line discipline in a loop until there is no more data left without any on one's
> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
> in the flush_to_ldisc while loop to avoid it.
Please properly wrap your changelog text at 72 columns.
>
> Signed-off-by: Guanghui Feng <[email protected]>
> ---
> drivers/tty/tty_buffer.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
> index bd2d915..77b92f9 100644
> --- a/drivers/tty/tty_buffer.c
> +++ b/drivers/tty/tty_buffer.c
> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
> if (!count)
> break;
> head->read += count;
> + cond_resched();
This is almost never the correct solution for fixing a problem in the
kernel anymore.
And if it is, it needs to be documented really really well. I think you
just slowed down the overall throughput of a tty device by adding this
call, so are you sure you didn't break something?
And why are you not running with a preempt kernel here? What prevents
that from being enabled to solve issues like this?
Also, having only one CPU burning through a network workload like this
seems correct to me, why would you want the CPU to stop handling the
data being sent to it like this? You have at least 40 other ones to do
other things here :)
thanks,
greg k-h
在 2021/9/30 13:38, Greg KH 写道:
> On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>> which look like this one:
>>
>> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>> Workqueue: events_unbound flush_to_ldisc
>> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
>> pc : slip_unesc+0x80/0x214 [slip]
>> lr : slip_receive_buf+0x84/0x100 [slip]
>> sp : ffff80005274bce0
>> x29: ffff80005274bce0 x28: 0000000000000000
>> x27: ffff00525626fcc8 x26: ffff800011921078
>> x25: 0000000000000000 x24: 0000000000000004
>> x23: ffff00402b4059c0 x22: ffff00402b405940
>> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
>> x19: 0000000000000000 x18: 0000000000000000
>> x17: 0000000000000000 x16: 0000000000000000
>> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
>> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
>> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
>> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
>> x7 : 0000000000000000 x6 : 0000000000000001
>> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
>> x3 : ffff205d87b81e1f x2 : 0000000000000005
>> x1 : 000000000000005f x0 : ffff00402b405940
>> Call trace:
>> slip_unesc+0x80/0x214 [slip]
>> tty_ldisc_receive_buf+0x64/0x80
>> tty_port_default_receive_buf+0x50/0x90
>> flush_to_ldisc+0xbc/0x110
>> process_one_work+0x1d4/0x4b0
>> worker_thread+0x180/0x430
>> kthread+0x11c/0x120
>> Kernel panic - not syncing: softlockup: hung tasks
>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>> Workqueue: events_unbound flush_to_ldisc
>> Call trace:
>> dump_backtrace+0x0/0x1ec
>> show_stack+0x24/0x30
>> dump_stack+0xd0/0x128
>> panic+0x15c/0x374
>> watchdog_timer_fn+0x2b8/0x304
>> __run_hrtimer+0x88/0x2c0
>> __hrtimer_run_queues+0xa4/0x120
>> hrtimer_interrupt+0xfc/0x270
>> arch_timer_handler_phys+0x40/0x50
>> handle_percpu_devid_irq+0x94/0x220
>> __handle_domain_irq+0x88/0xf0
>> gic_handle_irq+0x84/0xfc
>> el1_irq+0xc8/0x180
>> slip_unesc+0x80/0x214 [slip]
>> tty_ldisc_receive_buf+0x64/0x80
>> tty_port_default_receive_buf+0x50/0x90
>> flush_to_ldisc+0xbc/0x110
>> process_one_work+0x1d4/0x4b0
>> worker_thread+0x180/0x430
>> kthread+0x11c/0x120
>> SMP: stopping secondary CPUs
>>
>> In the testcase pty04, there are multple processes and we only pay close attention to the
>> first three actually. The first process call the write syscall to send data to the pty master
>> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
>> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
>> The third process will wait a moment in which the first two processes will do there work and then
>> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
>> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
>> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
>> master's buffhead to line discipline in a loop until there is no more data left without any on one's
>> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
>> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
>> in the flush_to_ldisc while loop to avoid it.
> Please properly wrap your changelog text at 72 columns.
When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send data to the pty master.
At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
>
>
>> Signed-off-by: Guanghui Feng <[email protected]>
>> ---
>> drivers/tty/tty_buffer.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
>> index bd2d915..77b92f9 100644
>> --- a/drivers/tty/tty_buffer.c
>> +++ b/drivers/tty/tty_buffer.c
>> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
>> if (!count)
>> break;
>> head->read += count;
>> + cond_resched();
> This is almost never the correct solution for fixing a problem in the
> kernel anymore.
>
> And if it is, it needs to be documented really really well. I think you
> just slowed down the overall throughput of a tty device by adding this
> call, so are you sure you didn't break something?
OK, it should be:
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd2d915..77b92f9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+ if (need_resched())
+ cond_resched();
> And why are you not running with a preempt kernel here? What prevents
> that from being enabled to solve issues like this?
In server mode, we usually running without preempt kernel for
performance(with less scheduling)
> Also, having only one CPU burning through a network workload like this
> seems correct to me, why would you want the CPU to stop handling the
> data being sent to it like this? You have at least 40 other ones to do
> other things here :)
>
> thanks,
>
> greg k-h
When only using one core, the pty data sending and workqueue can't do
work simultaneously. When the sender and workqueue
running in different core, the workqueue will do the flush_to_ldisc in a
loop until there is no more data left which will result in
occuring softlockup when the sender sends data fastly in full time. So I
add need_resched check and cond_resched in the
flush_to_ldisc while loop to avoid it(without preempt kernel).
thanks
Guanghui Feng
On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
>
> 在 2021/9/30 13:38, Greg KH 写道:
> > On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
> > > When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> > > which look like this one:
> > >
> > > watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
> > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
> > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > Workqueue: events_unbound flush_to_ldisc
> > > pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
> > > pc : slip_unesc+0x80/0x214 [slip]
> > > lr : slip_receive_buf+0x84/0x100 [slip]
> > > sp : ffff80005274bce0
> > > x29: ffff80005274bce0 x28: 0000000000000000
> > > x27: ffff00525626fcc8 x26: ffff800011921078
> > > x25: 0000000000000000 x24: 0000000000000004
> > > x23: ffff00402b4059c0 x22: ffff00402b405940
> > > x21: ffff205d87b81e21 x20: ffff205d87b81b9b
> > > x19: 0000000000000000 x18: 0000000000000000
> > > x17: 0000000000000000 x16: 0000000000000000
> > > x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
> > > x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
> > > x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
> > > x9 : ffff8000097d7628 x8 : ffff205d87b85e20
> > > x7 : 0000000000000000 x6 : 0000000000000001
> > > x5 : ffff8000097dc008 x4 : ffff8000097d75a4
> > > x3 : ffff205d87b81e1f x2 : 0000000000000005
> > > x1 : 000000000000005f x0 : ffff00402b405940
> > > Call trace:
> > > slip_unesc+0x80/0x214 [slip]
> > > tty_ldisc_receive_buf+0x64/0x80
> > > tty_port_default_receive_buf+0x50/0x90
> > > flush_to_ldisc+0xbc/0x110
> > > process_one_work+0x1d4/0x4b0
> > > worker_thread+0x180/0x430
> > > kthread+0x11c/0x120
> > > Kernel panic - not syncing: softlockup: hung tasks
> > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
> > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > Workqueue: events_unbound flush_to_ldisc
> > > Call trace:
> > > dump_backtrace+0x0/0x1ec
> > > show_stack+0x24/0x30
> > > dump_stack+0xd0/0x128
> > > panic+0x15c/0x374
> > > watchdog_timer_fn+0x2b8/0x304
> > > __run_hrtimer+0x88/0x2c0
> > > __hrtimer_run_queues+0xa4/0x120
> > > hrtimer_interrupt+0xfc/0x270
> > > arch_timer_handler_phys+0x40/0x50
> > > handle_percpu_devid_irq+0x94/0x220
> > > __handle_domain_irq+0x88/0xf0
> > > gic_handle_irq+0x84/0xfc
> > > el1_irq+0xc8/0x180
> > > slip_unesc+0x80/0x214 [slip]
> > > tty_ldisc_receive_buf+0x64/0x80
> > > tty_port_default_receive_buf+0x50/0x90
> > > flush_to_ldisc+0xbc/0x110
> > > process_one_work+0x1d4/0x4b0
> > > worker_thread+0x180/0x430
> > > kthread+0x11c/0x120
> > > SMP: stopping secondary CPUs
> > >
> > > In the testcase pty04, there are multple processes and we only pay close attention to the
> > > first three actually. The first process call the write syscall to send data to the pty master
> > > with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
> > > The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
> > > The third process will wait a moment in which the first two processes will do there work and then
> > > it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
> > > Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
> > > time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
> > > master's buffhead to line discipline in a loop until there is no more data left without any on one's
> > > own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
> > > without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
> > > in the flush_to_ldisc while loop to avoid it.
> > Please properly wrap your changelog text at 72 columns.
>
> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> which look like this one:
> Call trace:
> dump_backtrace+0x0/0x1ec
> show_stack+0x24/0x30
> dump_stack+0xd0/0x128
> panic+0x15c/0x374
> watchdog_timer_fn+0x2b8/0x304
> __run_hrtimer+0x88/0x2c0
> __hrtimer_run_queues+0xa4/0x120
> hrtimer_interrupt+0xfc/0x270
> arch_timer_handler_phys+0x40/0x50
> handle_percpu_devid_irq+0x94/0x220
> __handle_domain_irq+0x88/0xf0
> gic_handle_irq+0x84/0xfc
> el1_irq+0xc8/0x180
> slip_unesc+0x80/0x214 [slip]
> tty_ldisc_receive_buf+0x64/0x80
> tty_port_default_receive_buf+0x50/0x90
> flush_to_ldisc+0xbc/0x110
> process_one_work+0x1d4/0x4b0
> worker_thread+0x180/0x430
> kthread+0x11c/0x120
>
> In the testcase pty04, The first process call the write syscall to send data to the pty master.
> At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
> in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
> long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
Is this a "real" test for something that you have seen in a normal
workload? ltp is known for having buggy/confusing tests in it in the
past, you might wish to consult with the authors of that test.
>
> >
> >
> > > Signed-off-by: Guanghui Feng <[email protected]>
> > > ---
> > > drivers/tty/tty_buffer.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
> > > index bd2d915..77b92f9 100644
> > > --- a/drivers/tty/tty_buffer.c
> > > +++ b/drivers/tty/tty_buffer.c
> > > @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
> > > if (!count)
> > > break;
> > > head->read += count;
> > > + cond_resched();
> > This is almost never the correct solution for fixing a problem in the
> > kernel anymore.
> >
> > And if it is, it needs to be documented really really well. I think you
> > just slowed down the overall throughput of a tty device by adding this
> > call, so are you sure you didn't break something?
>
> OK, it should be:
>
> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
> index bd2d915..77b92f9 100644
> --- a/drivers/tty/tty_buffer.c
> +++ b/drivers/tty/tty_buffer.c
> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
> if (!count)
> break;
> head->read += count;
> + if (need_resched())
> + cond_resched();
Still feels really wrong, we do not sprinkle this all around the kernel
if we do not have to.
> > And why are you not running with a preempt kernel here? What prevents
> > that from being enabled to solve issues like this?
> In server mode, we usually running without preempt kernel for
> performance(with less scheduling)
You are trading off throughput for this very reason, you are sending
data faster than you could normally have, so why are you wanting to stop
that?
> > Also, having only one CPU burning through a network workload like this
> > seems correct to me, why would you want the CPU to stop handling the
> > data being sent to it like this? You have at least 40 other ones to do
> > other things here :)
> >
> > thanks,
> >
> > greg k-h
>
> When only using one core, the pty data sending and workqueue can't do work
> simultaneously. When the sender and workqueue
>
> running in different core, the workqueue will do the flush_to_ldisc in a
> loop until there is no more data left which will result in
>
> occuring softlockup when the sender sends data fastly in full time. So I add
> need_resched check and cond_resched in the
>
> flush_to_ldisc while loop to avoid it(without preempt kernel).
Why not just switch to preempt kernel then if this specific workload
really is important to you?
Again, is this a real workload, or just a contrived test that is trying
to get as much throughput as possible for a single pty device?
thanks,
greg k-h
在 2021/10/10 21:18, Greg KH 写道:
> On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
>> 在 2021/9/30 13:38, Greg KH 写道:
>>> On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
>>>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>>>> which look like this one:
>>>>
>>>> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>> Workqueue: events_unbound flush_to_ldisc
>>>> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
>>>> pc : slip_unesc+0x80/0x214 [slip]
>>>> lr : slip_receive_buf+0x84/0x100 [slip]
>>>> sp : ffff80005274bce0
>>>> x29: ffff80005274bce0 x28: 0000000000000000
>>>> x27: ffff00525626fcc8 x26: ffff800011921078
>>>> x25: 0000000000000000 x24: 0000000000000004
>>>> x23: ffff00402b4059c0 x22: ffff00402b405940
>>>> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
>>>> x19: 0000000000000000 x18: 0000000000000000
>>>> x17: 0000000000000000 x16: 0000000000000000
>>>> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
>>>> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
>>>> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
>>>> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
>>>> x7 : 0000000000000000 x6 : 0000000000000001
>>>> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
>>>> x3 : ffff205d87b81e1f x2 : 0000000000000005
>>>> x1 : 000000000000005f x0 : ffff00402b405940
>>>> Call trace:
>>>> slip_unesc+0x80/0x214 [slip]
>>>> tty_ldisc_receive_buf+0x64/0x80
>>>> tty_port_default_receive_buf+0x50/0x90
>>>> flush_to_ldisc+0xbc/0x110
>>>> process_one_work+0x1d4/0x4b0
>>>> worker_thread+0x180/0x430
>>>> kthread+0x11c/0x120
>>>> Kernel panic - not syncing: softlockup: hung tasks
>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>> Workqueue: events_unbound flush_to_ldisc
>>>> Call trace:
>>>> dump_backtrace+0x0/0x1ec
>>>> show_stack+0x24/0x30
>>>> dump_stack+0xd0/0x128
>>>> panic+0x15c/0x374
>>>> watchdog_timer_fn+0x2b8/0x304
>>>> __run_hrtimer+0x88/0x2c0
>>>> __hrtimer_run_queues+0xa4/0x120
>>>> hrtimer_interrupt+0xfc/0x270
>>>> arch_timer_handler_phys+0x40/0x50
>>>> handle_percpu_devid_irq+0x94/0x220
>>>> __handle_domain_irq+0x88/0xf0
>>>> gic_handle_irq+0x84/0xfc
>>>> el1_irq+0xc8/0x180
>>>> slip_unesc+0x80/0x214 [slip]
>>>> tty_ldisc_receive_buf+0x64/0x80
>>>> tty_port_default_receive_buf+0x50/0x90
>>>> flush_to_ldisc+0xbc/0x110
>>>> process_one_work+0x1d4/0x4b0
>>>> worker_thread+0x180/0x430
>>>> kthread+0x11c/0x120
>>>> SMP: stopping secondary CPUs
>>>>
>>>> In the testcase pty04, there are multple processes and we only pay close attention to the
>>>> first three actually. The first process call the write syscall to send data to the pty master
>>>> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
>>>> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
>>>> The third process will wait a moment in which the first two processes will do there work and then
>>>> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
>>>> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
>>>> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
>>>> master's buffhead to line discipline in a loop until there is no more data left without any on one's
>>>> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
>>>> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
>>>> in the flush_to_ldisc while loop to avoid it.
>>> Please properly wrap your changelog text at 72 columns.
>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>> which look like this one:
>> Call trace:
>> dump_backtrace+0x0/0x1ec
>> show_stack+0x24/0x30
>> dump_stack+0xd0/0x128
>> panic+0x15c/0x374
>> watchdog_timer_fn+0x2b8/0x304
>> __run_hrtimer+0x88/0x2c0
>> __hrtimer_run_queues+0xa4/0x120
>> hrtimer_interrupt+0xfc/0x270
>> arch_timer_handler_phys+0x40/0x50
>> handle_percpu_devid_irq+0x94/0x220
>> __handle_domain_irq+0x88/0xf0
>> gic_handle_irq+0x84/0xfc
>> el1_irq+0xc8/0x180
>> slip_unesc+0x80/0x214 [slip]
>> tty_ldisc_receive_buf+0x64/0x80
>> tty_port_default_receive_buf+0x50/0x90
>> flush_to_ldisc+0xbc/0x110
>> process_one_work+0x1d4/0x4b0
>> worker_thread+0x180/0x430
>> kthread+0x11c/0x120
>>
>> In the testcase pty04, The first process call the write syscall to send data to the pty master.
>> At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
>> in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
>> long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
> Is this a "real" test for something that you have seen in a normal
> workload? ltp is known for having buggy/confusing tests in it in the
> past, you might wish to consult with the authors of that test.
Firstly, thanks for your response.
I have check the ltp pty testcase. At the same time, I find the pty
softlockup in arm64, and it is similar to others.
https://github.com/victronenergy/venus/issues/350
https://groups.google.com/g/syzkaller-lts-bugs/c/SpkH8yH26js/m/3aifBl_GAwAJ
>>>
>>>> Signed-off-by: Guanghui Feng <[email protected]>
>>>> ---
>>>> drivers/tty/tty_buffer.c | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
>>>> index bd2d915..77b92f9 100644
>>>> --- a/drivers/tty/tty_buffer.c
>>>> +++ b/drivers/tty/tty_buffer.c
>>>> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
>>>> if (!count)
>>>> break;
>>>> head->read += count;
>>>> + cond_resched();
>>> This is almost never the correct solution for fixing a problem in the
>>> kernel anymore.
>>>
>>> And if it is, it needs to be documented really really well. I think you
>>> just slowed down the overall throughput of a tty device by adding this
>>> call, so are you sure you didn't break something?
>> OK, it should be:
>>
>> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
>> index bd2d915..77b92f9 100644
>> --- a/drivers/tty/tty_buffer.c
>> +++ b/drivers/tty/tty_buffer.c
>> @@ -534,6 +534,7 @@ static void flush_to_ldisc(struct work_struct *work)
>> if (!count)
>> break;
>> head->read += count;
>> + if (need_resched())
>> + cond_resched();
> Still feels really wrong, we do not sprinkle this all around the kernel
> if we do not have to.
>
>>> And why are you not running with a preempt kernel here? What prevents
>>> that from being enabled to solve issues like this?
>> In server mode, we usually running without preempt kernel for
>> performance(with less scheduling)
> You are trading off throughput for this very reason, you are sending
> data faster than you could normally have, so why are you wanting to stop
> that?
>
>>> Also, having only one CPU burning through a network workload like this
>>> seems correct to me, why would you want the CPU to stop handling the
>>> data being sent to it like this? You have at least 40 other ones to do
>>> other things here :)
>>>
>>> thanks,
>>>
>>> greg k-h
>> When only using one core, the pty data sending and workqueue can't do work
>> simultaneously. When the sender and workqueue
>>
>> running in different core, the workqueue will do the flush_to_ldisc in a
>> loop until there is no more data left which will result in
>>
>> occuring softlockup when the sender sends data fastly in full time. So I add
>> need_resched check and cond_resched in the
>>
>> flush_to_ldisc while loop to avoid it(without preempt kernel).
> Why not just switch to preempt kernel then if this specific workload
> really is important to you?
>
> Again, is this a real workload, or just a contrived test that is trying
> to get as much throughput as possible for a single pty device?
>
> thanks,
>
> greg k-h
Because there are many enviroment working right for a long time, and
normally only doing bug fix,
and the consumers don't be willing to change the kernel configues.
thanks
Guanghui Feng
On Mon, Oct 11, 2021 at 03:42:38PM +0800, guanghui.fgh wrote:
>
> 在 2021/10/10 21:18, Greg KH 写道:
> > On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
> > > 在 2021/9/30 13:38, Greg KH 写道:
> > > > On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
> > > > > When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> > > > > which look like this one:
> > > > >
> > > > > watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
> > > > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
> > > > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > > > Workqueue: events_unbound flush_to_ldisc
> > > > > pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
> > > > > pc : slip_unesc+0x80/0x214 [slip]
> > > > > lr : slip_receive_buf+0x84/0x100 [slip]
> > > > > sp : ffff80005274bce0
> > > > > x29: ffff80005274bce0 x28: 0000000000000000
> > > > > x27: ffff00525626fcc8 x26: ffff800011921078
> > > > > x25: 0000000000000000 x24: 0000000000000004
> > > > > x23: ffff00402b4059c0 x22: ffff00402b405940
> > > > > x21: ffff205d87b81e21 x20: ffff205d87b81b9b
> > > > > x19: 0000000000000000 x18: 0000000000000000
> > > > > x17: 0000000000000000 x16: 0000000000000000
> > > > > x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
> > > > > x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
> > > > > x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
> > > > > x9 : ffff8000097d7628 x8 : ffff205d87b85e20
> > > > > x7 : 0000000000000000 x6 : 0000000000000001
> > > > > x5 : ffff8000097dc008 x4 : ffff8000097d75a4
> > > > > x3 : ffff205d87b81e1f x2 : 0000000000000005
> > > > > x1 : 000000000000005f x0 : ffff00402b405940
> > > > > Call trace:
> > > > > slip_unesc+0x80/0x214 [slip]
> > > > > tty_ldisc_receive_buf+0x64/0x80
> > > > > tty_port_default_receive_buf+0x50/0x90
> > > > > flush_to_ldisc+0xbc/0x110
> > > > > process_one_work+0x1d4/0x4b0
> > > > > worker_thread+0x180/0x430
> > > > > kthread+0x11c/0x120
> > > > > Kernel panic - not syncing: softlockup: hung tasks
> > > > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
> > > > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > > > Workqueue: events_unbound flush_to_ldisc
> > > > > Call trace:
> > > > > dump_backtrace+0x0/0x1ec
> > > > > show_stack+0x24/0x30
> > > > > dump_stack+0xd0/0x128
> > > > > panic+0x15c/0x374
> > > > > watchdog_timer_fn+0x2b8/0x304
> > > > > __run_hrtimer+0x88/0x2c0
> > > > > __hrtimer_run_queues+0xa4/0x120
> > > > > hrtimer_interrupt+0xfc/0x270
> > > > > arch_timer_handler_phys+0x40/0x50
> > > > > handle_percpu_devid_irq+0x94/0x220
> > > > > __handle_domain_irq+0x88/0xf0
> > > > > gic_handle_irq+0x84/0xfc
> > > > > el1_irq+0xc8/0x180
> > > > > slip_unesc+0x80/0x214 [slip]
> > > > > tty_ldisc_receive_buf+0x64/0x80
> > > > > tty_port_default_receive_buf+0x50/0x90
> > > > > flush_to_ldisc+0xbc/0x110
> > > > > process_one_work+0x1d4/0x4b0
> > > > > worker_thread+0x180/0x430
> > > > > kthread+0x11c/0x120
> > > > > SMP: stopping secondary CPUs
> > > > >
> > > > > In the testcase pty04, there are multple processes and we only pay close attention to the
> > > > > first three actually. The first process call the write syscall to send data to the pty master
> > > > > with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
> > > > > The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
> > > > > The third process will wait a moment in which the first two processes will do there work and then
> > > > > it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
> > > > > Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
> > > > > time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
> > > > > master's buffhead to line discipline in a loop until there is no more data left without any on one's
> > > > > own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
> > > > > without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
> > > > > in the flush_to_ldisc while loop to avoid it.
> > > > Please properly wrap your changelog text at 72 columns.
> > > When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> > > which look like this one:
> > > Call trace:
> > > dump_backtrace+0x0/0x1ec
> > > show_stack+0x24/0x30
> > > dump_stack+0xd0/0x128
> > > panic+0x15c/0x374
> > > watchdog_timer_fn+0x2b8/0x304
> > > __run_hrtimer+0x88/0x2c0
> > > __hrtimer_run_queues+0xa4/0x120
> > > hrtimer_interrupt+0xfc/0x270
> > > arch_timer_handler_phys+0x40/0x50
> > > handle_percpu_devid_irq+0x94/0x220
> > > __handle_domain_irq+0x88/0xf0
> > > gic_handle_irq+0x84/0xfc
> > > el1_irq+0xc8/0x180
> > > slip_unesc+0x80/0x214 [slip]
> > > tty_ldisc_receive_buf+0x64/0x80
> > > tty_port_default_receive_buf+0x50/0x90
> > > flush_to_ldisc+0xbc/0x110
> > > process_one_work+0x1d4/0x4b0
> > > worker_thread+0x180/0x430
> > > kthread+0x11c/0x120
> > >
> > > In the testcase pty04, The first process call the write syscall to send data to the pty master.
> > > At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
> > > in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
> > > long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
> > Is this a "real" test for something that you have seen in a normal
> > workload? ltp is known for having buggy/confusing tests in it in the
> > past, you might wish to consult with the authors of that test.
>
> Firstly, thanks for your response.
>
> I have check the ltp pty testcase. At the same time, I find the pty
> softlockup in arm64, and it is similar to others.
>
> https://github.com/victronenergy/venus/issues/350
>
> https://groups.google.com/g/syzkaller-lts-bugs/c/SpkH8yH26js/m/3aifBl_GAwAJ
Hm, ok, can you please resubmit this based on the changes discussed in
thread and I will re-review it again.
thanks,
greg k-h
On Mon, Oct 11, 2021 at 06:18:41PM +0800, guanghui.fgh wrote:
>
> 在 2021/10/11 15:50, Greg KH 写道:
> > On Mon, Oct 11, 2021 at 03:42:38PM +0800, guanghui.fgh wrote:
> > > 在 2021/10/10 21:18, Greg KH 写道:
> > > > On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
> > > > > 在 2021/9/30 13:38, Greg KH 写道:
> > > > > > On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
> > > > > > > When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> > > > > > > which look like this one:
> > > > > > >
> > > > > > > watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
> > > > > > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
> > > > > > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > > > > > Workqueue: events_unbound flush_to_ldisc
> > > > > > > pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
> > > > > > > pc : slip_unesc+0x80/0x214 [slip]
> > > > > > > lr : slip_receive_buf+0x84/0x100 [slip]
> > > > > > > sp : ffff80005274bce0
> > > > > > > x29: ffff80005274bce0 x28: 0000000000000000
> > > > > > > x27: ffff00525626fcc8 x26: ffff800011921078
> > > > > > > x25: 0000000000000000 x24: 0000000000000004
> > > > > > > x23: ffff00402b4059c0 x22: ffff00402b405940
> > > > > > > x21: ffff205d87b81e21 x20: ffff205d87b81b9b
> > > > > > > x19: 0000000000000000 x18: 0000000000000000
> > > > > > > x17: 0000000000000000 x16: 0000000000000000
> > > > > > > x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
> > > > > > > x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
> > > > > > > x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
> > > > > > > x9 : ffff8000097d7628 x8 : ffff205d87b85e20
> > > > > > > x7 : 0000000000000000 x6 : 0000000000000001
> > > > > > > x5 : ffff8000097dc008 x4 : ffff8000097d75a4
> > > > > > > x3 : ffff205d87b81e1f x2 : 0000000000000005
> > > > > > > x1 : 000000000000005f x0 : ffff00402b405940
> > > > > > > Call trace:
> > > > > > > slip_unesc+0x80/0x214 [slip]
> > > > > > > tty_ldisc_receive_buf+0x64/0x80
> > > > > > > tty_port_default_receive_buf+0x50/0x90
> > > > > > > flush_to_ldisc+0xbc/0x110
> > > > > > > process_one_work+0x1d4/0x4b0
> > > > > > > worker_thread+0x180/0x430
> > > > > > > kthread+0x11c/0x120
> > > > > > > Kernel panic - not syncing: softlockup: hung tasks
> > > > > > > CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
> > > > > > > Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
> > > > > > > Workqueue: events_unbound flush_to_ldisc
> > > > > > > Call trace:
> > > > > > > dump_backtrace+0x0/0x1ec
> > > > > > > show_stack+0x24/0x30
> > > > > > > dump_stack+0xd0/0x128
> > > > > > > panic+0x15c/0x374
> > > > > > > watchdog_timer_fn+0x2b8/0x304
> > > > > > > __run_hrtimer+0x88/0x2c0
> > > > > > > __hrtimer_run_queues+0xa4/0x120
> > > > > > > hrtimer_interrupt+0xfc/0x270
> > > > > > > arch_timer_handler_phys+0x40/0x50
> > > > > > > handle_percpu_devid_irq+0x94/0x220
> > > > > > > __handle_domain_irq+0x88/0xf0
> > > > > > > gic_handle_irq+0x84/0xfc
> > > > > > > el1_irq+0xc8/0x180
> > > > > > > slip_unesc+0x80/0x214 [slip]
> > > > > > > tty_ldisc_receive_buf+0x64/0x80
> > > > > > > tty_port_default_receive_buf+0x50/0x90
> > > > > > > flush_to_ldisc+0xbc/0x110
> > > > > > > process_one_work+0x1d4/0x4b0
> > > > > > > worker_thread+0x180/0x430
> > > > > > > kthread+0x11c/0x120
> > > > > > > SMP: stopping secondary CPUs
> > > > > > >
> > > > > > > In the testcase pty04, there are multple processes and we only pay close attention to the
> > > > > > > first three actually. The first process call the write syscall to send data to the pty master
> > > > > > > with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
> > > > > > > The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
> > > > > > > The third process will wait a moment in which the first two processes will do there work and then
> > > > > > > it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
> > > > > > > Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
> > > > > > > time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
> > > > > > > master's buffhead to line discipline in a loop until there is no more data left without any on one's
> > > > > > > own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
> > > > > > > without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
> > > > > > > in the flush_to_ldisc while loop to avoid it.
> > > > > > Please properly wrap your changelog text at 72 columns.
> > > > > When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> > > > > which look like this one:
> > > > > Call trace:
> > > > > dump_backtrace+0x0/0x1ec
> > > > > show_stack+0x24/0x30
> > > > > dump_stack+0xd0/0x128
> > > > > panic+0x15c/0x374
> > > > > watchdog_timer_fn+0x2b8/0x304
> > > > > __run_hrtimer+0x88/0x2c0
> > > > > __hrtimer_run_queues+0xa4/0x120
> > > > > hrtimer_interrupt+0xfc/0x270
> > > > > arch_timer_handler_phys+0x40/0x50
> > > > > handle_percpu_devid_irq+0x94/0x220
> > > > > __handle_domain_irq+0x88/0xf0
> > > > > gic_handle_irq+0x84/0xfc
> > > > > el1_irq+0xc8/0x180
> > > > > slip_unesc+0x80/0x214 [slip]
> > > > > tty_ldisc_receive_buf+0x64/0x80
> > > > > tty_port_default_receive_buf+0x50/0x90
> > > > > flush_to_ldisc+0xbc/0x110
> > > > > process_one_work+0x1d4/0x4b0
> > > > > worker_thread+0x180/0x430
> > > > > kthread+0x11c/0x120
> > > > >
> > > > > In the testcase pty04, The first process call the write syscall to send data to the pty master.
> > > > > At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
> > > > > in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
> > > > > long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
> > > > Is this a "real" test for something that you have seen in a normal
> > > > workload? ltp is known for having buggy/confusing tests in it in the
> > > > past, you might wish to consult with the authors of that test.
> > > Firstly, thanks for your response.
> > >
> > > I have check the ltp pty testcase. At the same time, I find the pty
> > > softlockup in arm64, and it is similar to others.
> > >
> > > https://github.com/victronenergy/venus/issues/350
> > >
> > > https://groups.google.com/g/syzkaller-lts-bugs/c/SpkH8yH26js/m/3aifBl_GAwAJ
> > Hm, ok, can you please resubmit this based on the changes discussed in
> > thread and I will re-review it again.
> >
> > thanks,
> >
> > greg k-h
>
> When I run the ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
> which look like this one:
> Call trace:
> dump_backtrace+0x0/0x1ec
> show_stack+0x24/0x30
> dump_stack+0xd0/0x128
> panic+0x15c/0x374
> watchdog_timer_fn+0x2b8/0x304
> __run_hrtimer+0x88/0x2c0
> __hrtimer_run_queues+0xa4/0x120
> hrtimer_interrupt+0xfc/0x270
> arch_timer_handler_phys+0x40/0x50
> handle_percpu_devid_irq+0x94/0x220
> __handle_domain_irq+0x88/0xf0
> gic_handle_irq+0x84/0xfc
> el1_irq+0xc8/0x180
> slip_unesc+0x80/0x214 [slip]
> tty_ldisc_receive_buf+0x64/0x80
> tty_port_default_receive_buf+0x50/0x90
> flush_to_ldisc+0xbc/0x110
> process_one_work+0x1d4/0x4b0
> worker_thread+0x180/0x430
> kthread+0x11c/0x120
>
> In the testcase pty04, The first process call the write syscall to send data to the pty master.
> At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is
> no more data left. When the sender and workqueue running in different core, the sender sends data
> fastly in full time which will result in workqueue doing work in loop for a long time and occuring
> softlockup in flush_to_ldisc with kernel configured without CONFIG_PREEMPT. So I add need_resched
> check and cond_resched in the flush_to_ldisc loop to avoid it.
>
> Signed-off-by: Guanghui Feng<[email protected]>
>
>
> diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
> index bd2d915..77b92f9 100644
> --- a/drivers/tty/tty_buffer.c
> +++ b/drivers/tty/tty_buffer.c
> @@ -534,6 +534,8 @@ static void flush_to_ldisc(struct work_struct *work)
> if (!count)
> break;
> head->read += count;
> + if (need_resched())
> + cond_resched();
> }
> mutex_unlock(&buf->lock);
> --
> 1.8.3.1
>
This is in no format that I can apply it in. You ignored my request to
properly wrap your changelog text lines, and your signed-off-by needs a
space after the name, and it's in response to another patch and is not
stand alone, and it is a v2 patch with no list of changes from the
previous one.
Please fix up.
thanks,
greg k-h
在 2021/10/11 15:50, Greg KH 写道:
> On Mon, Oct 11, 2021 at 03:42:38PM +0800, guanghui.fgh wrote:
>> 在 2021/10/10 21:18, Greg KH 写道:
>>> On Fri, Oct 08, 2021 at 03:50:15PM +0800, guanghui.fgh wrote:
>>>> 在 2021/9/30 13:38, Greg KH 写道:
>>>>> On Thu, Sep 30, 2021 at 11:11:38AM +0800, Guanghui Feng wrote:
>>>>>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>>>>>> which look like this one:
>>>>>>
>>>>>> watchdog: BUG: soft lockup - CPU#41 stuck for 67s! [kworker/u192:2:106867]
>>>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OE 5.10.23 #1
>>>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>>>> Workqueue: events_unbound flush_to_ldisc
>>>>>> pstate: 00c00009 (nzcv daif +PAN +UAO -TCO BTYPE=--)
>>>>>> pc : slip_unesc+0x80/0x214 [slip]
>>>>>> lr : slip_receive_buf+0x84/0x100 [slip]
>>>>>> sp : ffff80005274bce0
>>>>>> x29: ffff80005274bce0 x28: 0000000000000000
>>>>>> x27: ffff00525626fcc8 x26: ffff800011921078
>>>>>> x25: 0000000000000000 x24: 0000000000000004
>>>>>> x23: ffff00402b4059c0 x22: ffff00402b405940
>>>>>> x21: ffff205d87b81e21 x20: ffff205d87b81b9b
>>>>>> x19: 0000000000000000 x18: 0000000000000000
>>>>>> x17: 0000000000000000 x16: 0000000000000000
>>>>>> x15: 0000000000000000 x14: 5f5f5f5f5f5f5f5f
>>>>>> x13: 5f5f5f5f5f5f5f5f x12: 5f5f5f5f5f5f5f5f
>>>>>> x11: 5f5f5f5f5f5f5f5f x10: 5f5f5f5f5f5f5f5f
>>>>>> x9 : ffff8000097d7628 x8 : ffff205d87b85e20
>>>>>> x7 : 0000000000000000 x6 : 0000000000000001
>>>>>> x5 : ffff8000097dc008 x4 : ffff8000097d75a4
>>>>>> x3 : ffff205d87b81e1f x2 : 0000000000000005
>>>>>> x1 : 000000000000005f x0 : ffff00402b405940
>>>>>> Call trace:
>>>>>> slip_unesc+0x80/0x214 [slip]
>>>>>> tty_ldisc_receive_buf+0x64/0x80
>>>>>> tty_port_default_receive_buf+0x50/0x90
>>>>>> flush_to_ldisc+0xbc/0x110
>>>>>> process_one_work+0x1d4/0x4b0
>>>>>> worker_thread+0x180/0x430
>>>>>> kthread+0x11c/0x120
>>>>>> Kernel panic - not syncing: softlockup: hung tasks
>>>>>> CPU: 41 PID: 106867 Comm: kworker/u192:2 Kdump: loaded Tainted: G OEL 5.10.23 #1
>>>>>> Hardware name: H3C R4960 G3/BC82AMDDA, BIOS 1.70 01/07/2021
>>>>>> Workqueue: events_unbound flush_to_ldisc
>>>>>> Call trace:
>>>>>> dump_backtrace+0x0/0x1ec
>>>>>> show_stack+0x24/0x30
>>>>>> dump_stack+0xd0/0x128
>>>>>> panic+0x15c/0x374
>>>>>> watchdog_timer_fn+0x2b8/0x304
>>>>>> __run_hrtimer+0x88/0x2c0
>>>>>> __hrtimer_run_queues+0xa4/0x120
>>>>>> hrtimer_interrupt+0xfc/0x270
>>>>>> arch_timer_handler_phys+0x40/0x50
>>>>>> handle_percpu_devid_irq+0x94/0x220
>>>>>> __handle_domain_irq+0x88/0xf0
>>>>>> gic_handle_irq+0x84/0xfc
>>>>>> el1_irq+0xc8/0x180
>>>>>> slip_unesc+0x80/0x214 [slip]
>>>>>> tty_ldisc_receive_buf+0x64/0x80
>>>>>> tty_port_default_receive_buf+0x50/0x90
>>>>>> flush_to_ldisc+0xbc/0x110
>>>>>> process_one_work+0x1d4/0x4b0
>>>>>> worker_thread+0x180/0x430
>>>>>> kthread+0x11c/0x120
>>>>>> SMP: stopping secondary CPUs
>>>>>>
>>>>>> In the testcase pty04, there are multple processes and we only pay close attention to the
>>>>>> first three actually. The first process call the write syscall to send data to the pty master
>>>>>> with all one's strength(tty_write->file_tty_write->do_tty_write->n_tty_write call chain).
>>>>>> The second process call the read syscall to receive data by the pty slave(with PF_PACKET socket).
>>>>>> The third process will wait a moment in which the first two processes will do there work and then
>>>>>> it call ioctl to hangup the pty pair which will cease the first two process read/write to the pty.
>>>>>> Before hangup the pty, the first process send data to the pty buffhead with high speed. At the same
>>>>>> time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data from pty
>>>>>> master's buffhead to line discipline in a loop until there is no more data left without any on one's
>>>>>> own schedule which will result in doing work in flush_to_ldisc for a long time. As kernel configured
>>>>>> without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc. So I add cond_resched
>>>>>> in the flush_to_ldisc while loop to avoid it.
>>>>> Please properly wrap your changelog text at 72 columns.
>>>> When I run ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
>>>> which look like this one:
>>>> Call trace:
>>>> dump_backtrace+0x0/0x1ec
>>>> show_stack+0x24/0x30
>>>> dump_stack+0xd0/0x128
>>>> panic+0x15c/0x374
>>>> watchdog_timer_fn+0x2b8/0x304
>>>> __run_hrtimer+0x88/0x2c0
>>>> __hrtimer_run_queues+0xa4/0x120
>>>> hrtimer_interrupt+0xfc/0x270
>>>> arch_timer_handler_phys+0x40/0x50
>>>> handle_percpu_devid_irq+0x94/0x220
>>>> __handle_domain_irq+0x88/0xf0
>>>> gic_handle_irq+0x84/0xfc
>>>> el1_irq+0xc8/0x180
>>>> slip_unesc+0x80/0x214 [slip]
>>>> tty_ldisc_receive_buf+0x64/0x80
>>>> tty_port_default_receive_buf+0x50/0x90
>>>> flush_to_ldisc+0xbc/0x110
>>>> process_one_work+0x1d4/0x4b0
>>>> worker_thread+0x180/0x430
>>>> kthread+0x11c/0x120
>>>>
>>>> In the testcase pty04, The first process call the write syscall to send data to the pty master.
>>>> At the same time if the workqueue is waken up, the workqueue will do the flush_to_ldisc to pop data
>>>> in a loop until there is no more data left which will result in doing work in flush_to_ldisc for a
>>>> long time. As kernel configured without CONFIG_PREEMPT, there maybe occurs softlockup in the flush_to_ldisc.
>>> Is this a "real" test for something that you have seen in a normal
>>> workload? ltp is known for having buggy/confusing tests in it in the
>>> past, you might wish to consult with the authors of that test.
>> Firstly, thanks for your response.
>>
>> I have check the ltp pty testcase. At the same time, I find the pty
>> softlockup in arm64, and it is similar to others.
>>
>> https://github.com/victronenergy/venus/issues/350
>>
>> https://groups.google.com/g/syzkaller-lts-bugs/c/SpkH8yH26js/m/3aifBl_GAwAJ
> Hm, ok, can you please resubmit this based on the changes discussed in
> thread and I will re-review it again.
>
> thanks,
>
> greg k-h
When I run the ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send data to the pty master.
At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is
no more data left. When the sender and workqueue running in different core, the sender sends data
fastly in full time which will result in workqueue doing work in loop for a long time and occuring
softlockup in flush_to_ldisc with kernel configured without CONFIG_PREEMPT. So I add need_resched
check and cond_resched in the flush_to_ldisc loop to avoid it.
Signed-off-by: Guanghui Feng<[email protected]>
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bd2d915..77b92f9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,8 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+ if (need_resched())
+ cond_resched();
}
mutex_unlock(&buf->lock);
--
1.8.3.1