2021-11-01 04:10:05

by William Breathitt Gray

[permalink] [raw]
Subject: Re: [PATCH 4/8] docs: counter: add unit timer sysfs attributes

On Sat, Oct 30, 2021 at 11:40:27AM -0500, David Lechner wrote:
> On 10/28/21 2:59 AM, William Breathitt Gray wrote:
> > On Wed, Oct 27, 2021 at 10:30:36AM -0500, David Lechner wrote:
> >> On 10/27/21 1:46 AM, William Breathitt Gray wrote:
> >>> On Sat, Oct 16, 2021 at 08:33:39PM -0500, David Lechner wrote:
> >>>> This documents new unit timer sysfs attributes for the counter
> >>>> subsystem.
> >>>>
> >>>> Signed-off-by: David Lechner <[email protected]>
> >>>
> >>> Hello David,
> >>>
> >>> The unit timer is effectively a Count in its own right, so instead of
> >>> introducing new sysfs attributes you can just implement it as another
> >>> Count in the driver. Count 0 is "QPOSCNT", so set the name of this new
> >>> Count 1 as "Unit Timer" (or the datasheet naming if more apt) to
> >>> differentiate the Counts. You can then provide the "unit_timer_enable",
> >>> "unit_timer_period", and "unit_timer_time" functionalities as respective
> >>> Count 1 extensions ("enable" and "period") and Count 1 "count".
> >
> > Actually if the counter function here is COUNTER_FUNCTION_DECREASE, then
>
> It is an increasing counter.
>
> > instead of introducing a new "period" extension, define this as a
> > "ceiling" extension; that's what ceiling represents in the Counter
> > interface: "the upper limit for the respective counter", which is the
> > period of a timer counting down to a timeout.
>
> In one of the other patches, you made a comment about the semantics
> of ceiling with relation to the overflow event. We can indeed treat
> the timer as a counter and the period as the ceiling. However, the
> unit timer event occurs when the count is equal to the period (ceiling)
> whereas an overflow event occurs when the count exceeds the ceiling.
> So what would this event be called in generic counter terms? "timeout"
> doesn't seem right.

Okay, so COUNTER_EVENT_THRESHOLD would be the respective Counter event
type for this behavior because the event triggers once a threshold is
reached (ceiling in this case).

But implementing the unit timer as a counter might not be the best path
forward as you've mentioned below.

> >
> > William Breathitt Gray
> >
> >>>
> >>> If you believe it appropriate, you can provide the raw timer ticks via
> >>> the Count 1 "count" while a nanoseconds interface is provided via a
> >>> Count 1 extension "timeout" (or something similar).
> >>>
>
> One area where this concept of treating a timer as a counter potentially
> breaks down is the issue of CPU frequency scaling. By treating the unit
> timer as a timer, then the kernel could take care of any changes in clock
> rate internally by automatically adjusting the prescalar and period on
> rate change events. But if we are just treating it as a counter, then we
> should probably just have an attribute that provides the clock rate and
> if we want to support CPU frequency scaling, add an event that indicates
> that the clock rate changed.

You're right, treating the unit timer as a counter might not be the most
appropriate interface. Because this is a timer afterall, perhaps
exposing this via the hrtimer API is better. You then have an existing
interface available designed for timer configuration, and you can
leverage the struct hrtimer function callback to handle your timeout
interrupts.

William Breathitt Gray


Attachments:
(No filename) (3.32 kB)
signature.asc (849.00 B)
Download all attachments

2021-11-01 05:30:25

by William Breathitt Gray

[permalink] [raw]
Subject: Re: [PATCH 4/8] docs: counter: add unit timer sysfs attributes

On Mon, Nov 01, 2021 at 01:08:46PM +0900, William Breathitt Gray wrote:
> On Sat, Oct 30, 2021 at 11:40:27AM -0500, David Lechner wrote:
> > On 10/28/21 2:59 AM, William Breathitt Gray wrote:
> > > On Wed, Oct 27, 2021 at 10:30:36AM -0500, David Lechner wrote:
> > >> On 10/27/21 1:46 AM, William Breathitt Gray wrote:
> > >>> On Sat, Oct 16, 2021 at 08:33:39PM -0500, David Lechner wrote:
> > >>>> This documents new unit timer sysfs attributes for the counter
> > >>>> subsystem.
> > >>>>
> > >>>> Signed-off-by: David Lechner <[email protected]>
> > >>>
> > >>> Hello David,
> > >>>
> > >>> The unit timer is effectively a Count in its own right, so instead of
> > >>> introducing new sysfs attributes you can just implement it as another
> > >>> Count in the driver. Count 0 is "QPOSCNT", so set the name of this new
> > >>> Count 1 as "Unit Timer" (or the datasheet naming if more apt) to
> > >>> differentiate the Counts. You can then provide the "unit_timer_enable",
> > >>> "unit_timer_period", and "unit_timer_time" functionalities as respective
> > >>> Count 1 extensions ("enable" and "period") and Count 1 "count".
> > >
> > > Actually if the counter function here is COUNTER_FUNCTION_DECREASE, then
> >
> > It is an increasing counter.
> >
> > > instead of introducing a new "period" extension, define this as a
> > > "ceiling" extension; that's what ceiling represents in the Counter
> > > interface: "the upper limit for the respective counter", which is the
> > > period of a timer counting down to a timeout.
> >
> > In one of the other patches, you made a comment about the semantics
> > of ceiling with relation to the overflow event. We can indeed treat
> > the timer as a counter and the period as the ceiling. However, the
> > unit timer event occurs when the count is equal to the period (ceiling)
> > whereas an overflow event occurs when the count exceeds the ceiling.
> > So what would this event be called in generic counter terms? "timeout"
> > doesn't seem right.
>
> Okay, so COUNTER_EVENT_THRESHOLD would be the respective Counter event
> type for this behavior because the event triggers once a threshold is
> reached (ceiling in this case).
>
> But implementing the unit timer as a counter might not be the best path
> forward as you've mentioned below.
>
> > >
> > > William Breathitt Gray
> > >
> > >>>
> > >>> If you believe it appropriate, you can provide the raw timer ticks via
> > >>> the Count 1 "count" while a nanoseconds interface is provided via a
> > >>> Count 1 extension "timeout" (or something similar).
> > >>>
> >
> > One area where this concept of treating a timer as a counter potentially
> > breaks down is the issue of CPU frequency scaling. By treating the unit
> > timer as a timer, then the kernel could take care of any changes in clock
> > rate internally by automatically adjusting the prescalar and period on
> > rate change events. But if we are just treating it as a counter, then we
> > should probably just have an attribute that provides the clock rate and
> > if we want to support CPU frequency scaling, add an event that indicates
> > that the clock rate changed.
>
> You're right, treating the unit timer as a counter might not be the most
> appropriate interface. Because this is a timer afterall, perhaps
> exposing this via the hrtimer API is better. You then have an existing
> interface available designed for timer configuration, and you can
> leverage the struct hrtimer function callback to handle your timeout
> interrupts.
>
> William Breathitt Gray

Sorry, I think I meant the clockevents framework, not hrtimers. I'm not
as familiar with timers but perhaps you know more than I do here.

William Breathitt Gray


Attachments:
(No filename) (3.70 kB)
signature.asc (849.00 B)
Download all attachments