Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
---
Documentation/networking/devlink/mlx5.rst | 3 +
.../net/ethernet/mellanox/mlx5/core/devlink.c | 67 +++++++++++++++++++
.../net/ethernet/mellanox/mlx5/core/main.c | 21 ++++++
include/linux/mlx5/mlx5_ifc.h | 2 +-
4 files changed, 92 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst
index 38089f0aefcf..38e94ed65936 100644
--- a/Documentation/networking/devlink/mlx5.rst
+++ b/Documentation/networking/devlink/mlx5.rst
@@ -23,6 +23,9 @@ Parameters
* - ``event_eq_size``
- driverinit
- The range is between 64 and 4096.
+ * - ``max_macs``
+ - driverinit
+ - The range is between 1 and 2^31. Only power of 2 values are supported.
The ``mlx5`` driver also implements the following driver-specific
parameters.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index 31bbbb30acae..4c96a1f60ef8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -773,6 +773,66 @@ static void mlx5_devlink_auxdev_params_unregister(struct devlink *devlink)
mlx5_devlink_eth_param_unregister(devlink);
}
+static int mlx5_devlink_max_uc_list_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (val.vu32 == 0) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value must be greater than 0");
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(val.vu32)) {
+ NL_SET_ERR_MSG_MOD(extack, "Only power of 2 values are supported for max_macs");
+ return -EINVAL;
+ }
+
+ if (ilog2(val.vu32) >
+ MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list)) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value is out of the supported range");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct devlink_param max_uc_list_param =
+ DEVLINK_PARAM_GENERIC(MAX_MACS, BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, mlx5_devlink_max_uc_list_validate);
+
+static int mlx5_devlink_max_uc_list_param_register(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+ union devlink_param_value value;
+ int err;
+
+ if (!MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list_wr_supported))
+ return 0;
+
+ err = devlink_param_register(devlink, &max_uc_list_param);
+ if (err)
+ return err;
+
+ value.vu32 = 1 << MLX5_CAP_GEN(dev, log_max_current_uc_list);
+ devlink_param_driverinit_value_set(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ value);
+ return 0;
+}
+
+static void
+mlx5_devlink_max_uc_list_param_unregister(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (!MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list_wr_supported))
+ return;
+
+ devlink_param_unregister(devlink, &max_uc_list_param);
+}
+
#define MLX5_TRAP_DROP(_id, _group_id) \
DEVLINK_TRAP_GENERIC(DROP, DROP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
@@ -832,6 +892,10 @@ int mlx5_devlink_register(struct devlink *devlink)
if (err)
goto auxdev_reg_err;
+ err = mlx5_devlink_max_uc_list_param_register(devlink);
+ if (err)
+ goto max_uc_list_err;
+
err = mlx5_devlink_traps_register(devlink);
if (err)
goto traps_reg_err;
@@ -842,6 +906,8 @@ int mlx5_devlink_register(struct devlink *devlink)
return 0;
traps_reg_err:
+ mlx5_devlink_max_uc_list_param_unregister(devlink);
+max_uc_list_err:
mlx5_devlink_auxdev_params_unregister(devlink);
auxdev_reg_err:
devlink_params_unregister(devlink, mlx5_devlink_params,
@@ -852,6 +918,7 @@ int mlx5_devlink_register(struct devlink *devlink)
void mlx5_devlink_unregister(struct devlink *devlink)
{
mlx5_devlink_traps_unregister(devlink);
+ mlx5_devlink_max_uc_list_param_unregister(devlink);
mlx5_devlink_auxdev_params_unregister(devlink);
devlink_params_unregister(devlink, mlx5_devlink_params,
ARRAY_SIZE(mlx5_devlink_params));
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index d97c9e86d7b3..b1a82226623c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -484,10 +484,26 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ODP);
}
+static int max_uc_list_get_devlink_param(struct mlx5_core_dev *dev)
+{
+ struct devlink *devlink = priv_to_devlink(dev);
+ union devlink_param_value val;
+ int err;
+
+ err = devlink_param_driverinit_value_get(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ &val);
+ if (!err)
+ return val.vu32;
+ mlx5_core_dbg(dev, "Failed to get param. err = %d\n", err);
+ return err;
+}
+
static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
{
struct mlx5_profile *prof = &dev->profile;
void *set_hca_cap;
+ int max_uc_list;
int err;
err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
@@ -561,6 +577,11 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
if (MLX5_CAP_GEN(dev, roce_rw_supported))
MLX5_SET(cmd_hca_cap, set_hca_cap, roce, mlx5_is_roce_init_enabled(dev));
+ max_uc_list = max_uc_list_get_devlink_param(dev);
+ if (max_uc_list > 0)
+ MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_current_uc_list,
+ ilog2(max_uc_list));
+
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
}
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index fbaab440a484..e9db12aae8f9 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1621,7 +1621,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 ext_stride_num_range[0x1];
u8 roce_rw_supported[0x1];
- u8 reserved_at_3a2[0x1];
+ u8 log_max_current_uc_list_wr_supported[0x1];
u8 log_max_stride_sz_rq[0x5];
u8 reserved_at_3a8[0x3];
u8 log_min_stride_sz_rq[0x5];
--
2.21.3
On Wed, Dec 08, 2021 at 09:03:50AM +0200, Shay Drory wrote:
> Currently, max_macs is taking 70Kbytes of memory per function. This
> size is not needed in all use cases, and is critical with large scale.
> Hence, allow user to configure the number of max_macs.
>
> For example, to reduce the number of max_macs to 1, execute::
> $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
> cmode driverinit
> $ devlink dev reload pci/0000:00:0b.0
>
> Signed-off-by: Shay Drory <[email protected]>
> Reviewed-by: Moshe Shemesh <[email protected]>
> Reviewed-by: Parav Pandit <[email protected]>
> ---
> Documentation/networking/devlink/mlx5.rst | 3 +
> .../net/ethernet/mellanox/mlx5/core/devlink.c | 67 +++++++++++++++++++
> .../net/ethernet/mellanox/mlx5/core/main.c | 21 ++++++
> include/linux/mlx5/mlx5_ifc.h | 2 +-
> 4 files changed, 92 insertions(+), 1 deletion(-)
<...>
> diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
> index fbaab440a484..e9db12aae8f9 100644
> --- a/include/linux/mlx5/mlx5_ifc.h
> +++ b/include/linux/mlx5/mlx5_ifc.h
> @@ -1621,7 +1621,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
>
> u8 ext_stride_num_range[0x1];
> u8 roce_rw_supported[0x1];
> - u8 reserved_at_3a2[0x1];
> + u8 log_max_current_uc_list_wr_supported[0x1];
> u8 log_max_stride_sz_rq[0x5];
> u8 reserved_at_3a8[0x3];
> u8 log_min_stride_sz_rq[0x5];
All IFC changes should be in separate patch and need to go to shared branch (mlx5-next).
Thanks
> --
> 2.21.3
>