This patch series adds support for the remoteprocs found in
sm6350/sm7225 and enables them on the Fairphone 4 smartphone.
Luca Weiss (8):
dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
remoteproc: qcom: pas: Add SM6350 MPSS support
arm64: dts: qcom: sm6350: Add MPSS nodes
remoteproc: qcom: pas: Add SM6350 ADSP support
arm64: dts: qcom: sm6350: Add ADSP nodes
remoteproc: qcom: pas: Add SM6350 CDSP support
arm64: dts: qcom: sm6350: Add CDSP nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS
.../bindings/remoteproc/qcom,adsp.yaml | 28 ++
arch/arm64/boot/dts/qcom/sm6350.dtsi | 279 ++++++++++++++++++
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 31 ++
drivers/remoteproc/qcom_q6v5_pas.c | 37 +++
4 files changed, 375 insertions(+)
--
2.34.1
Add compatibles for the remoteprocs found in SM6350.
Signed-off-by: Luca Weiss <[email protected]>
Acked-by: Konrad Dybcio <[email protected]>
---
.../bindings/remoteproc/qcom,adsp.yaml | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 63e06d93bca3..c635c181d2c2 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -33,6 +33,9 @@ properties:
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
- qcom,sdx55-mpss-pas
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
+ - qcom,sm6350-mpss-pas
- qcom,sm8150-adsp-pas
- qcom,sm8150-cdsp-pas
- qcom,sm8150-mpss-pas
@@ -158,6 +161,9 @@ allOf:
- qcom,sc8180x-mpss-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
+ - qcom,sm6350-mpss-pas
- qcom,sm8150-adsp-pas
- qcom,sm8150-cdsp-pas
- qcom,sm8150-mpss-pas
@@ -266,6 +272,8 @@ allOf:
- qcom,sc8180x-cdsp-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
- qcom,sm8150-adsp-pas
- qcom,sm8150-cdsp-pas
- qcom,sm8150-slpi-pas
@@ -301,6 +309,7 @@ allOf:
- qcom,sc7280-mpss-pas
- qcom,sc8180x-mpss-pas
- qcom,sdx55-mpss-pas
+ - qcom,sm6350-mpss-pas
- qcom,sm8150-mpss-pas
- qcom,sm8350-mpss-pas
then:
@@ -385,6 +394,23 @@ allOf:
- const: mx
- const: mss
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm6350-cdsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MX power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
- if:
properties:
compatible:
@@ -405,6 +431,7 @@ allOf:
enum:
- qcom,sc7280-mpss-pas
- qcom,sdx55-mpss-pas
+ - qcom,sm6350-mpss-pas
- qcom,sm8150-mpss-pas
- qcom,sm8350-mpss-pas
then:
@@ -425,6 +452,7 @@ allOf:
enum:
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
+ - qcom,sm6350-adsp-pas
- qcom,sm8150-slpi-pas
- qcom,sm8250-adsp-pas
- qcom,sm8250-slpi-pas
--
2.34.1
Add the required nodes for booting the MPSS on sm6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 66 ++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 973e18fe3b67..9f9d4d916470 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -361,6 +361,32 @@ smem {
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
@@ -473,6 +499,46 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ mpss: remoteproc@4080000 {
+ compatible = "qcom,sm6350-mpss-pas";
+ reg = <0x0 0x04080000 0x0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM6350_CX>,
+ <&rpmhpd SM6350_MSS>;
+ power-domain-names = "cx", "mss";
+
+ memory-region = <&pil_modem_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ };
+ };
+
sdhc_2: sdhci@8804000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
--
2.34.1
Add a config for the CDSP present on SM6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
drivers/remoteproc/qcom_q6v5_pas.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 1d28036e0265..370a70e25722 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -629,6 +629,23 @@ static const struct adsp_data sdm845_cdsp_resource_init = {
.ssctl_id = 0x17,
};
+static const struct adsp_data sm6350_cdsp_resource = {
+ .crash_reason_smem = 601,
+ .firmware_name = "cdsp.mdt",
+ .pas_id = 18,
+ .has_aggre2_clk = false,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mx",
+ NULL
+ },
+ .load_state = "cdsp",
+ .ssr_name = "cdsp",
+ .sysmon_name = "cdsp",
+ .ssctl_id = 0x17,
+};
+
static const struct adsp_data sm8150_cdsp_resource = {
.crash_reason_smem = 601,
.firmware_name = "cdsp.mdt",
@@ -822,6 +839,7 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
{ .compatible = "qcom,sm6350-adsp-pas", .data = &sm6350_adsp_resource},
+ { .compatible = "qcom,sm6350-cdsp-pas", .data = &sm6350_cdsp_resource},
{ .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
--
2.34.1
Add the required nodes for booting the ADSP on sm6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 91 ++++++++++++++++++++++++++++
1 file changed, 91 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 9f9d4d916470..2ae7899bdc39 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -361,6 +361,30 @@ smem {
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
@@ -499,6 +523,73 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ adsp: remoteproc@3000000 {
+ compatible = "qcom,sm6350-adsp-pas";
+ reg = <0 0x03000000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM6350_LCX>,
+ <&rpmhpd SM6350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1003 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1004 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1005 0x0>;
+ qcom,nsessions = <5>;
+ };
+ };
+ };
+ };
+
mpss: remoteproc@4080000 {
compatible = "qcom,sm6350-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;
--
2.34.1
Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index ff07b7e8d64f..1ce606e66474 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -53,6 +53,27 @@ volume-up {
gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
};
};
+
+ reserved-memory {
+ /*
+ * The rmtfs memory region in downstream is 'dynamically allocated'
+ * but given the same address every time. Hard code it as this address is
+ * where the modem firmware expects it to be.
+ */
+ memory@efe01000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xefe01000 0 0x600000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+};
+
+&adsp {
+ status = "okay";
+ firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
};
&apps_rsc {
@@ -269,6 +290,16 @@ vreg_bob: bob {
};
};
+&cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+};
+
+&mpss {
+ status = "okay";
+ firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+};
+
&pm6150l_wled {
status = "okay";
--
2.34.1
Add the required nodes for booting the CDSP on sm6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 122 +++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 2ae7899bdc39..a7158fe9e192 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -385,6 +385,30 @@ smp2p_adsp_in: slave-kernel {
};
};
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
@@ -630,6 +654,104 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ cdsp: remoteproc@8300000 {
+ compatible = "qcom,sm6350-cdsp-pas";
+ reg = <0 0x08300000 0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SM6350_CX>,
+ <&rpmhpd SM6350_MX>;
+ power-domain-names = "cx", "mx";
+
+ memory-region = <&pil_cdsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x1401 0x20>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x1402 0x20>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1403 0x20>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1404 0x20>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1405 0x20>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x1406 0x20>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x1407 0x20>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x1408 0x20>;
+ };
+
+ /* note: secure cb9 in downstream */
+ };
+ };
+ };
+
sdhc_2: sdhci@8804000 {
compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
--
2.34.1
Add a config for the ADSP present on SM6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
drivers/remoteproc/qcom_q6v5_pas.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 2d43aa0dfeb7..1d28036e0265 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -524,6 +524,23 @@ static const struct adsp_data sdm845_adsp_resource_init = {
.ssctl_id = 0x14,
};
+static const struct adsp_data sm6350_adsp_resource = {
+ .crash_reason_smem = 423,
+ .firmware_name = "adsp.mdt",
+ .pas_id = 1,
+ .has_aggre2_clk = false,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "lcx",
+ "lmx",
+ NULL
+ },
+ .load_state = "adsp",
+ .ssr_name = "lpass",
+ .sysmon_name = "adsp",
+ .ssctl_id = 0x14,
+};
+
static const struct adsp_data sm8150_adsp_resource = {
.crash_reason_smem = 423,
.firmware_name = "adsp.mdt",
@@ -804,6 +821,7 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,sdm845-adsp-pas", .data = &sdm845_adsp_resource_init},
{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
+ { .compatible = "qcom,sm6350-adsp-pas", .data = &sm6350_adsp_resource},
{ .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
--
2.34.1
Add a config for the MPSS present on SM6350.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
---
drivers/remoteproc/qcom_q6v5_pas.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 03857dc9cdc1..2d43aa0dfeb7 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -804,6 +804,7 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,sdm845-adsp-pas", .data = &sdm845_adsp_resource_init},
{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
+ { .compatible = "qcom,sm6350-mpss-pas", .data = &mpss_resource_init},
{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
{ .compatible = "qcom,sm8150-mpss-pas", .data = &mpss_resource_init},
--
2.34.1
On Mon, 13 Dec 2021 09:22:01 +0100, Luca Weiss wrote:
> Add compatibles for the remoteprocs found in SM6350.
>
> Signed-off-by: Luca Weiss <[email protected]>
> Acked-by: Konrad Dybcio <[email protected]>
> ---
> .../bindings/remoteproc/qcom,adsp.yaml | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
Reviewed-by: Rob Herring <[email protected]>
On Mon, 13 Dec 2021 09:22:00 +0100, Luca Weiss wrote:
> This patch series adds support for the remoteprocs found in
> sm6350/sm7225 and enables them on the Fairphone 4 smartphone.
>
> Luca Weiss (8):
> dt-bindings: remoteproc: qcom: pas: Add SM6350 adsp, cdsp & mpss
> remoteproc: qcom: pas: Add SM6350 MPSS support
> arm64: dts: qcom: sm6350: Add MPSS nodes
> remoteproc: qcom: pas: Add SM6350 ADSP support
> arm64: dts: qcom: sm6350: Add ADSP nodes
> remoteproc: qcom: pas: Add SM6350 CDSP support
> arm64: dts: qcom: sm6350: Add CDSP nodes
> arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS
>
> [...]
Applied, thanks!
[3/8] arm64: dts: qcom: sm6350: Add MPSS nodes
commit: 489be59b635ba76ea16d6f820ddf037644b3415a
[5/8] arm64: dts: qcom: sm6350: Add ADSP nodes
commit: efc33c969f23cd6fe983e7e7bdcd8bbb1521f1de
[7/8] arm64: dts: qcom: sm6350: Add CDSP nodes
commit: 8eb5287e8a425aa7b27cfbb92096550046a231f8
[8/8] arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSS
commit: bc279dc04e9ee23f6a22f6c7a6924edbd5fe0f6d
Best regards,
--
Bjorn Andersson <[email protected]>