2021-12-27 17:01:57

by David Heidelberg

[permalink] [raw]
Subject: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

Convert Qualcomm PMIC SPMI binding to yaml format.

Signed-off-by: David Heidelberg <[email protected]>

---
v2:
- add #address and #size-cells
- add reg and remove spmi include from example
v3:
- fix doc reference error (make refcheckdocs)

Signed-off-by: David Heidelberg <[email protected]>
---
.../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
.../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
3 files changed, 121 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
index 7a27c500ff63..3810a80536f7 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -58,7 +58,7 @@ Required properties for peripheral child nodes:
Optional properties for peripheral child nodes:
- interrupts: Interrupts are specified as a 4-tuple. For more information
see:
- Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+ Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
- interrupt-names: Corresponding interrupt name to the interrupts property

Each child node of SPMI slave id represents a function of the PMIC. In the
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index ca645e21fe47..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names : must contain:
- "core" - core registers
- "intr" - interrupt controller registers
- "cnfg" - configuration registers
- Registers used only for V2 PMIC Arbiter:
- "chnls" - tx-channel per virtual slave registers.
- "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
- correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
- single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
- listed in the 'interrupts' property, must contain:
- "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
- cell 1: slave ID for the requested interrupt (0-15)
- cell 2: peripheral ID for requested interrupt (0-255)
- cell 3: the requested peripheral interrupt (0-7)
- cell 4: interrupt flags indicating level-sense information, as defined in
- dt-bindings/interrupt-controller/irq.h
-
-Example:
-
- spmi {
- compatible = "qcom,spmi-pmic-arb";
- reg-names = "core", "intr", "cnfg";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
-
- interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
-
- qcom,ee = <0>;
- qcom,channel = <0>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- interrupt-controller;
- #interrupt-cells = <4>;
- };
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..55d379c85fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+ - Stephen Boyd <[email protected]>
+
+description: |
+ The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control a single SPMI master.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+allOf:
+ - $ref: spmi.yaml
+
+properties:
+ compatible:
+ const: qcom,spmi-pmic-arb
+
+ reg:
+ oneOf:
+ - items: # V1
+ - description: core registers
+ - description: interrupt controller registers
+ - description: configuration registers
+ - items: # V2
+ - description: core registers
+ - description: tx-channel per virtual slave regosters
+ - description: rx-channel (called observer) per virtual slave registers
+ - description: interrupt controller registers
+ - description: configuration registers
+
+ reg-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: intr
+ - const: cnfg
+ - items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+ - const: intr
+ - const: cnfg
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#address-cells': true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+ '#size-cells': true
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+required:
+ - compatible
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - '#interrupt-cells'
+ - qcom,ee
+ - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
--
2.34.1



2021-12-29 09:49:00

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On Mon, 27 Dec 2021, David Heidelberg wrote:

> Convert Qualcomm PMIC SPMI binding to yaml format.
>
> Signed-off-by: David Heidelberg <[email protected]>
>
> ---
> v2:
> - add #address and #size-cells
> - add reg and remove spmi include from example
> v3:
> - fix doc reference error (make refcheckdocs)
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-

Acked-by: Lee Jones <[email protected]>

> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> 3 files changed, 121 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

2022-01-04 13:19:50

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On Mon, 27 Dec 2021 18:01:50 +0100, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.
>
> Signed-off-by: David Heidelberg <[email protected]>
>
> ---
> v2:
> - add #address and #size-cells
> - add reg and remove spmi include from example
> v3:
> - fix doc reference error (make refcheckdocs)
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> 3 files changed, 121 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>

Reviewed-by: Rob Herring <[email protected]>

2022-02-02 13:51:10

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On 27-12-21, 18:01, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.

Reviewed-by: Vinod Koul <[email protected]>

Steve, Can this be picked up please. I will rebase my v7 update based on
this...

>
> Signed-off-by: David Heidelberg <[email protected]>
>
> ---
> v2:
> - add #address and #size-cells
> - add reg and remove spmi include from example
> v3:
> - fix doc reference error (make refcheckdocs)
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> 3 files changed, 121 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index 7a27c500ff63..3810a80536f7 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -58,7 +58,7 @@ Required properties for peripheral child nodes:
> Optional properties for peripheral child nodes:
> - interrupts: Interrupts are specified as a 4-tuple. For more information
> see:
> - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> - interrupt-names: Corresponding interrupt name to the interrupts property
>
> Each child node of SPMI slave id represents a function of the PMIC. In the
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> deleted file mode 100644
> index ca645e21fe47..000000000000
> --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -Qualcomm SPMI Controller (PMIC Arbiter)
> -
> -The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
> -controller with wrapping arbitration logic to allow for multiple on-chip
> -devices to control a single SPMI master.
> -
> -The PMIC Arbiter can also act as an interrupt controller, providing interrupts
> -to slave devices.
> -
> -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
> -controller binding requirements for child nodes.
> -
> -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
> -generic interrupt controller binding documentation.
> -
> -Required properties:
> -- compatible : should be "qcom,spmi-pmic-arb".
> -- reg-names : must contain:
> - "core" - core registers
> - "intr" - interrupt controller registers
> - "cnfg" - configuration registers
> - Registers used only for V2 PMIC Arbiter:
> - "chnls" - tx-channel per virtual slave registers.
> - "obsrvr" - rx-channel (called observer) per virtual slave registers.
> -
> -- reg : address + size pairs describing the PMIC arb register sets; order must
> - correspond with the order of entries in reg-names
> -- #address-cells : must be set to 2
> -- #size-cells : must be set to 0
> -- qcom,ee : indicates the active Execution Environment identifier (0-5)
> -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
> -- interrupts : interrupt list for the PMIC Arb controller, must contain a
> - single interrupt entry for the peripheral interrupt
> -- interrupt-names : corresponding interrupt names for the interrupts
> - listed in the 'interrupts' property, must contain:
> - "periph_irq" - summary interrupt for PMIC peripherals
> -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
> -- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple:
> - cell 1: slave ID for the requested interrupt (0-15)
> - cell 2: peripheral ID for requested interrupt (0-255)
> - cell 3: the requested peripheral interrupt (0-7)
> - cell 4: interrupt flags indicating level-sense information, as defined in
> - dt-bindings/interrupt-controller/irq.h
> -
> -Example:
> -
> - spmi {
> - compatible = "qcom,spmi-pmic-arb";
> - reg-names = "core", "intr", "cnfg";
> - reg = <0xfc4cf000 0x1000>,
> - <0xfc4cb000 0x1000>,
> - <0xfc4ca000 0x1000>;
> -
> - interrupt-names = "periph_irq";
> - interrupts = <0 190 0>;
> -
> - qcom,ee = <0>;
> - qcom,channel = <0>;
> -
> - #address-cells = <2>;
> - #size-cells = <0>;
> -
> - interrupt-controller;
> - #interrupt-cells = <4>;
> - };
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> new file mode 100644
> index 000000000000..55d379c85fd9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Controller (PMIC Arbiter)
> +
> +maintainers:
> + - Stephen Boyd <[email protected]>
> +
> +description: |
> + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
> + controller with wrapping arbitration logic to allow for multiple on-chip
> + devices to control a single SPMI master.
> +
> + The PMIC Arbiter can also act as an interrupt controller, providing interrupts
> + to slave devices.
> +
> +allOf:
> + - $ref: spmi.yaml
> +
> +properties:
> + compatible:
> + const: qcom,spmi-pmic-arb
> +
> + reg:
> + oneOf:
> + - items: # V1
> + - description: core registers
> + - description: interrupt controller registers
> + - description: configuration registers
> + - items: # V2
> + - description: core registers
> + - description: tx-channel per virtual slave regosters
> + - description: rx-channel (called observer) per virtual slave registers
> + - description: interrupt controller registers
> + - description: configuration registers
> +
> + reg-names:
> + oneOf:
> + - items:
> + - const: core
> + - const: intr
> + - const: cnfg
> + - items:
> + - const: core
> + - const: chnls
> + - const: obsrvr
> + - const: intr
> + - const: cnfg
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + const: periph_irq
> +
> + interrupt-controller: true
> +
> + '#address-cells': true
> +
> + '#interrupt-cells':
> + const: 4
> + description: |
> + cell 1: slave ID for the requested interrupt (0-15)
> + cell 2: peripheral ID for requested interrupt (0-255)
> + cell 3: the requested peripheral interrupt (0-7)
> + cell 4: interrupt flags indicating level-sense information,
> + as defined in dt-bindings/interrupt-controller/irq.h
> +
> + '#size-cells': true
> +
> + qcom,ee:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 5
> + description: >
> + indicates the active Execution Environment identifier
> +
> + qcom,channel:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 5
> + description: >
> + which of the PMIC Arb provided channels to use for accesses
> +
> +required:
> + - compatible
> + - reg-names
> + - interrupts
> + - interrupt-names
> + - '#interrupt-cells'
> + - qcom,ee
> + - qcom,channel
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + spmi@fc4cf000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg-names = "core", "intr", "cnfg";
> + reg = <0xfc4cf000 0x1000>,
> + <0xfc4cb000 0x1000>,
> + <0xfc4ca000 0x1000>;
> +
> + interrupt-names = "periph_irq";
> + interrupts = <0 190 0>;
> +
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> --
> 2.34.1

--
~Vinod

2022-04-20 13:43:45

by Vinod Koul

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On 19-04-22, 15:42, Subbaraman Narayanamurthy wrote:
> >> Convert Qualcomm PMIC SPMI binding to yaml format.
>
> > Reviewed-by: Vinod Koul <[email protected]>
>
> > Steve, Can this be picked up please. I will rebase my v7 update based on
> > this...
>
> Can this DT bindings conversion patch be picked up please?
Yes please

This and spmi v7 support patches have been on list for quite long...

Thanks
--
~Vinod

Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

>> Convert Qualcomm PMIC SPMI binding to yaml format.

> Reviewed-by: Vinod Koul <[email protected]>

> Steve, Can this be picked up please. I will rebase my v7 update based on
> this...

Can this DT bindings conversion patch be picked up please?

2022-05-03 00:30:50

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On Mon, 27 Dec 2021 18:01:50 +0100, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.
>
> Signed-off-by: David Heidelberg <[email protected]>
>
> ---
> v2:
> - add #address and #size-cells
> - add reg and remove spmi include from example
> v3:
> - fix doc reference error (make refcheckdocs)
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> 3 files changed, 121 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>

Looks like this one got missed.

Applied, thanks!

2022-05-09 10:48:07

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On Mon, 27 Dec 2021, David Heidelberg wrote:

> Convert Qualcomm PMIC SPMI binding to yaml format.
>
> Signed-off-by: David Heidelberg <[email protected]>
>
> ---
> v2:
> - add #address and #size-cells
> - add reg and remove spmi include from example
> v3:
> - fix doc reference error (make refcheckdocs)
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> 3 files changed, 121 insertions(+), 66 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

Applied, thanks.

--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

2022-05-09 11:34:33

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

On Mon, 09 May 2022, Lee Jones wrote:

> On Mon, 27 Dec 2021, David Heidelberg wrote:
>
> > Convert Qualcomm PMIC SPMI binding to yaml format.
> >
> > Signed-off-by: David Heidelberg <[email protected]>
> >
> > ---
> > v2:
> > - add #address and #size-cells
> > - add reg and remove spmi include from example
> > v3:
> > - fix doc reference error (make refcheckdocs)
> >
> > Signed-off-by: David Heidelberg <[email protected]>
> > ---
> > .../bindings/mfd/qcom,spmi-pmic.txt | 2 +-
> > .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------
> > .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 ++++++++++++++++++
> > 3 files changed, 121 insertions(+), 66 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> > create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>
> Applied, thanks.

Cancel. I see that Rob already applied it.

--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog