This patch converts ata/cortina,gemini-sata-bridge binding to yaml
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Signed-off-by: Corentin Labbe <[email protected]>
---
Change since v1:
- fixed cosmetic nits reported by Damien Le Moal
Changes since v2:
- Added blank lines between properties
- Removed useless quotes and label
- Re-indented description
.../ata/cortina,gemini-sata-bridge.txt | 55 ---------
.../ata/cortina,gemini-sata-bridge.yaml | 107 ++++++++++++++++++
2 files changed, 107 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
deleted file mode 100644
index 1c3d3cc70051..000000000000
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
- "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
- the ATA controller and SATA bridges. Values 0..3:
- Mode 0: ata0 master <-> sata0
- ata1 master <-> sata1
- ata0 slave interface brought out on IDE pads
- Mode 1: ata0 master <-> sata0
- ata1 master <-> sata1
- ata1 slave interface brought out on IDE pads
- Mode 2: ata1 master <-> sata1
- ata1 slave <-> sata0
- ata0 master and slave interfaces brought out
- on IDE pads
- Mode 3: ata0 master <-> sata0
- ata0 slave <-> sata1
- ata1 master and slave interfaces brought out
- on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
- The muxmode setting decides whether ATA0 or ATA1 is brought out,
- and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
- inside the Gemnini SoC. The Muxmode decides what PATA blocks will
- be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
- compatible = "cortina,gemini-sata-bridge";
- reg = <0x46000000 0x100>;
- resets = <&rcon 26>, <&rcon 27>;
- reset-names = "sata0", "sata1";
- clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
- <&gcc GEMINI_CLK_GATE_SATA1>;
- clock-names = "SATA0_PCLK", "SATA1_PCLK";
- syscon = <&syscon>;
- cortina,gemini-ata-muxmode = <3>;
- cortina,gemini-enable-ide-pins;
- cortina,gemini-enable-sata-bridge;
-};
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 000000000000..f0fad63bb1af
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+ - Linus Walleij <[email protected]>
+
+description: |
+ The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+ takes two Faraday Technology FTIDE010 PATA controllers and bridges
+ them in different configurations to two SATA ports.
+
+properties:
+ compatible:
+ const: cortina,gemini-sata-bridge
+
+ reg:
+ minItems: 1
+
+ resets:
+ minItems: 2
+ description: phandles to the reset lines for both SATA bridges
+
+ reset-names:
+ items:
+ - const: sata0
+ - const: sata1
+
+ clocks:
+ minItems: 2
+ description: phandles to the compulsory peripheral clocks
+
+ clock-names:
+ items:
+ - const: SATA0_PCLK
+ - const: SATA1_PCLK
+
+ syscon:
+ minItems: 1
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to the global Gemini system controller
+
+ cortina,gemini-ata-muxmode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0
+ - 1
+ - 2
+ - 3
+ description: |
+ Tell the desired multiplexing mode for the ATA controller and SATA bridges. Values 0..3:
+ Mode 0: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata0 slave interface brought out on IDE pads
+ Mode 1: ata0 master <-> sata0
+ ata1 master <-> sata1
+ ata1 slave interface brought out on IDE pads
+ Mode 2: ata1 master <-> sata1
+ ata1 slave <-> sata0
+ ata0 master and slave interfaces brought out on IDE pads
+ Mode 3: ata0 master <-> sata0
+ ata0 slave <-> sata1
+ ata1 master and slave interfaces brought out on IDE pads
+
+ cortina,gemini-enable-ide-pins:
+ type: boolean
+ description: Enables the PATA to IDE connection.
+ The muxmode setting decides whether ATA0 or ATA1 is brought out,
+ and whether master, slave or both interfaces get brought out.
+
+ cortina,gemini-enable-sata-bridge:
+ type: boolean
+ description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+ The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+ - clocks
+ - clock-names
+ - cortina,gemini-ata-muxmode
+ - resets
+ - reset-names
+ - compatible
+ - reg
+ - syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cortina,gemini-clock.h>
+ sata@46000000 {
+ compatible = "cortina,gemini-sata-bridge";
+ reg = <0x46000000 0x100>;
+ resets = <&rcon 26>, <&rcon 27>;
+ reset-names = "sata0", "sata1";
+ clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+ <&gcc GEMINI_CLK_GATE_SATA1>;
+ clock-names = "SATA0_PCLK", "SATA1_PCLK";
+ syscon = <&syscon>;
+ cortina,gemini-ata-muxmode = <3>;
+ cortina,gemini-enable-ide-pins;
+ cortina,gemini-enable-sata-bridge;
+ };
--
2.34.1
Le Thu, Feb 10, 2022 at 10:58:39AM +0100, Krzysztof Kozlowski a ?crit :
> On 10/02/2022 10:44, Corentin Labbe wrote:
> > This patch converts ata/cortina,gemini-sata-bridge binding to yaml
> >
> > Reviewed-by: Linus Walleij <[email protected]>
> > Acked-by: Damien Le Moal <[email protected]>
> > Signed-off-by: Corentin Labbe <[email protected]>
> > ---
> > Change since v1:
> > - fixed cosmetic nits reported by Damien Le Moal
> > Changes since v2:
> > - Added blank lines between properties
> > - Removed useless quotes and label
> > - Re-indented description
> >
> > .../ata/cortina,gemini-sata-bridge.txt | 55 ---------
> > .../ata/cortina,gemini-sata-bridge.yaml | 107 ++++++++++++++++++
> > 2 files changed, 107 insertions(+), 55 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> > create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> > deleted file mode 100644
> > index 1c3d3cc70051..000000000000
> > --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> > +++ /dev/null
> > @@ -1,55 +0,0 @@
> > -* Cortina Systems Gemini SATA Bridge
> > -
> > -The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
> > -takes two Faraday Technology FTIDE010 PATA controllers and bridges
> > -them in different configurations to two SATA ports.
> > -
> > -Required properties:
> > -- compatible: should be
> > - "cortina,gemini-sata-bridge"
> > -- reg: registers and size for the block
> > -- resets: phandles to the reset lines for both SATA bridges
> > -- reset-names: must be "sata0", "sata1"
> > -- clocks: phandles to the compulsory peripheral clocks
> > -- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
> > -- syscon: a phandle to the global Gemini system controller
> > -- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
> > - the ATA controller and SATA bridges. Values 0..3:
> > - Mode 0: ata0 master <-> sata0
> > - ata1 master <-> sata1
> > - ata0 slave interface brought out on IDE pads
> > - Mode 1: ata0 master <-> sata0
> > - ata1 master <-> sata1
> > - ata1 slave interface brought out on IDE pads
> > - Mode 2: ata1 master <-> sata1
> > - ata1 slave <-> sata0
> > - ata0 master and slave interfaces brought out
> > - on IDE pads
> > - Mode 3: ata0 master <-> sata0
> > - ata0 slave <-> sata1
> > - ata1 master and slave interfaces brought out
> > - on IDE pads
> > -
> > -Optional boolean properties:
> > -- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
> > - The muxmode setting decides whether ATA0 or ATA1 is brought out,
> > - and whether master, slave or both interfaces get brought out.
> > -- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
> > - inside the Gemnini SoC. The Muxmode decides what PATA blocks will
> > - be muxed out and how.
> > -
> > -Example:
> > -
> > -sata: sata@46000000 {
> > - compatible = "cortina,gemini-sata-bridge";
> > - reg = <0x46000000 0x100>;
> > - resets = <&rcon 26>, <&rcon 27>;
> > - reset-names = "sata0", "sata1";
> > - clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
> > - <&gcc GEMINI_CLK_GATE_SATA1>;
> > - clock-names = "SATA0_PCLK", "SATA1_PCLK";
> > - syscon = <&syscon>;
> > - cortina,gemini-ata-muxmode = <3>;
> > - cortina,gemini-enable-ide-pins;
> > - cortina,gemini-enable-sata-bridge;
> > -};
> > diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
> > new file mode 100644
> > index 000000000000..f0fad63bb1af
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
> > @@ -0,0 +1,107 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Cortina Systems Gemini SATA Bridge
> > +
> > +maintainers:
> > + - Linus Walleij <[email protected]>
> > +
> > +description: |
> > + The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
> > + takes two Faraday Technology FTIDE010 PATA controllers and bridges
> > + them in different configurations to two SATA ports.
> > +
> > +properties:
> > + compatible:
> > + const: cortina,gemini-sata-bridge
> > +
> > + reg:
> > + minItems: 1
>
> maxItems? Why min?
>
> > +
> > + resets:
> > + minItems: 2
> > + description: phandles to the reset lines for both SATA bridges
>
> min+maxItems
>
> > +
> > + reset-names:
> > + items:
> > + - const: sata0
> > + - const: sata1
> > +
> > + clocks:
> > + minItems: 2
> > + description: phandles to the compulsory peripheral clocks
>
> min+maxItems
>
> > +
> > + clock-names:
> > + items:
> > + - const: SATA0_PCLK
> > + - const: SATA1_PCLK
> > +
> > + syscon:
> > + minItems: 1
>
> maxItems
>
Hello
I will fix them in v4.
Thanks
Regards
On 10/02/2022 10:44, Corentin Labbe wrote:
> This patch converts ata/cortina,gemini-sata-bridge binding to yaml
>
> Reviewed-by: Linus Walleij <[email protected]>
> Acked-by: Damien Le Moal <[email protected]>
> Signed-off-by: Corentin Labbe <[email protected]>
> ---
> Change since v1:
> - fixed cosmetic nits reported by Damien Le Moal
> Changes since v2:
> - Added blank lines between properties
> - Removed useless quotes and label
> - Re-indented description
>
> .../ata/cortina,gemini-sata-bridge.txt | 55 ---------
> .../ata/cortina,gemini-sata-bridge.yaml | 107 ++++++++++++++++++
> 2 files changed, 107 insertions(+), 55 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
>
> diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> deleted file mode 100644
> index 1c3d3cc70051..000000000000
> --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -* Cortina Systems Gemini SATA Bridge
> -
> -The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
> -takes two Faraday Technology FTIDE010 PATA controllers and bridges
> -them in different configurations to two SATA ports.
> -
> -Required properties:
> -- compatible: should be
> - "cortina,gemini-sata-bridge"
> -- reg: registers and size for the block
> -- resets: phandles to the reset lines for both SATA bridges
> -- reset-names: must be "sata0", "sata1"
> -- clocks: phandles to the compulsory peripheral clocks
> -- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
> -- syscon: a phandle to the global Gemini system controller
> -- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
> - the ATA controller and SATA bridges. Values 0..3:
> - Mode 0: ata0 master <-> sata0
> - ata1 master <-> sata1
> - ata0 slave interface brought out on IDE pads
> - Mode 1: ata0 master <-> sata0
> - ata1 master <-> sata1
> - ata1 slave interface brought out on IDE pads
> - Mode 2: ata1 master <-> sata1
> - ata1 slave <-> sata0
> - ata0 master and slave interfaces brought out
> - on IDE pads
> - Mode 3: ata0 master <-> sata0
> - ata0 slave <-> sata1
> - ata1 master and slave interfaces brought out
> - on IDE pads
> -
> -Optional boolean properties:
> -- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
> - The muxmode setting decides whether ATA0 or ATA1 is brought out,
> - and whether master, slave or both interfaces get brought out.
> -- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
> - inside the Gemnini SoC. The Muxmode decides what PATA blocks will
> - be muxed out and how.
> -
> -Example:
> -
> -sata: sata@46000000 {
> - compatible = "cortina,gemini-sata-bridge";
> - reg = <0x46000000 0x100>;
> - resets = <&rcon 26>, <&rcon 27>;
> - reset-names = "sata0", "sata1";
> - clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
> - <&gcc GEMINI_CLK_GATE_SATA1>;
> - clock-names = "SATA0_PCLK", "SATA1_PCLK";
> - syscon = <&syscon>;
> - cortina,gemini-ata-muxmode = <3>;
> - cortina,gemini-enable-ide-pins;
> - cortina,gemini-enable-sata-bridge;
> -};
> diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
> new file mode 100644
> index 000000000000..f0fad63bb1af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cortina Systems Gemini SATA Bridge
> +
> +maintainers:
> + - Linus Walleij <[email protected]>
> +
> +description: |
> + The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
> + takes two Faraday Technology FTIDE010 PATA controllers and bridges
> + them in different configurations to two SATA ports.
> +
> +properties:
> + compatible:
> + const: cortina,gemini-sata-bridge
> +
> + reg:
> + minItems: 1
maxItems? Why min?
> +
> + resets:
> + minItems: 2
> + description: phandles to the reset lines for both SATA bridges
min+maxItems
> +
> + reset-names:
> + items:
> + - const: sata0
> + - const: sata1
> +
> + clocks:
> + minItems: 2
> + description: phandles to the compulsory peripheral clocks
min+maxItems
> +
> + clock-names:
> + items:
> + - const: SATA0_PCLK
> + - const: SATA1_PCLK
> +
> + syscon:
> + minItems: 1
maxItems
Best regards,
Krzysztof