On Fri, Apr 22, 2022 at 2:22 PM Rob Herring <[email protected]> wrote:
>
> Convert the Synopsys Designware I3C master to DT schema format.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../bindings/i3c/snps,dw-i3c-master.txt | 41 ---------------
> .../bindings/i3c/snps,dw-i3c-master.yaml | 52 +++++++++++++++++++
> 2 files changed, 52 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
>
> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> deleted file mode 100644
> index 07f35f36085d..000000000000
> --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Bindings for Synopsys DesignWare I3C master block
> -=================================================
> -
> -Required properties:
> ---------------------
> -- compatible: shall be "snps,dw-i3c-master-1.00a"
> -- clocks: shall reference the core_clk
> -- interrupts: the interrupt line connected to this I3C master
> -- reg: Offset and length of I3C master registers
> -
> -Mandatory properties defined by the generic binding (see
> -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> -
> -- #address-cells: shall be set to 3
> -- #size-cells: shall be set to 0
> -
> -Optional properties defined by the generic binding (see
> -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> -
> -- i2c-scl-hz
> -- i3c-scl-hz
> -
> -I3C device connected on the bus follow the generic description (see
> -Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
> -
> -Example:
> -
> - i3c-master@2000 {
> - compatible = "snps,dw-i3c-master-1.00a";
> - #address-cells = <3>;
> - #size-cells = <0>;
> - reg = <0x02000 0x1000>;
> - interrupts = <0>;
> - clocks = <&i3cclk>;
> -
> - eeprom@57{
> - compatible = "atmel,24c01";
> - reg = <0x57 0x0 0x10>;
> - pagesize = <0x8>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> new file mode 100644
> index 000000000000..5b8b43e6f1e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare I3C master block
> +
> +maintainers:
> + - Vitor Soares <[email protected]>
And it bounces. Someone else want it?
Rob
On 22/04/2022 14:28:53-0500, Rob Herring wrote:
> On Fri, Apr 22, 2022 at 2:22 PM Rob Herring <[email protected]> wrote:
> >
> > Convert the Synopsys Designware I3C master to DT schema format.
> >
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
> > .../bindings/i3c/snps,dw-i3c-master.txt | 41 ---------------
> > .../bindings/i3c/snps,dw-i3c-master.yaml | 52 +++++++++++++++++++
> > 2 files changed, 52 insertions(+), 41 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > deleted file mode 100644
> > index 07f35f36085d..000000000000
> > --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > +++ /dev/null
> > @@ -1,41 +0,0 @@
> > -Bindings for Synopsys DesignWare I3C master block
> > -=================================================
> > -
> > -Required properties:
> > ---------------------
> > -- compatible: shall be "snps,dw-i3c-master-1.00a"
> > -- clocks: shall reference the core_clk
> > -- interrupts: the interrupt line connected to this I3C master
> > -- reg: Offset and length of I3C master registers
> > -
> > -Mandatory properties defined by the generic binding (see
> > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > -
> > -- #address-cells: shall be set to 3
> > -- #size-cells: shall be set to 0
> > -
> > -Optional properties defined by the generic binding (see
> > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > -
> > -- i2c-scl-hz
> > -- i3c-scl-hz
> > -
> > -I3C device connected on the bus follow the generic description (see
> > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
> > -
> > -Example:
> > -
> > - i3c-master@2000 {
> > - compatible = "snps,dw-i3c-master-1.00a";
> > - #address-cells = <3>;
> > - #size-cells = <0>;
> > - reg = <0x02000 0x1000>;
> > - interrupts = <0>;
> > - clocks = <&i3cclk>;
> > -
> > - eeprom@57{
> > - compatible = "atmel,24c01";
> > - reg = <0x57 0x0 0x10>;
> > - pagesize = <0x8>;
> > - };
> > - };
> > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > new file mode 100644
> > index 000000000000..5b8b43e6f1e4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Synopsys DesignWare I3C master block
> > +
> > +maintainers:
> > + - Vitor Soares <[email protected]>
>
> And it bounces. Someone else want it?
>
Probably no one but me.
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On Fri, Apr 22, 2022 at 09:37:01PM +0200, Alexandre Belloni wrote:
> On 22/04/2022 14:28:53-0500, Rob Herring wrote:
> > On Fri, Apr 22, 2022 at 2:22 PM Rob Herring <[email protected]> wrote:
> > >
> > > Convert the Synopsys Designware I3C master to DT schema format.
> > >
> > > Signed-off-by: Rob Herring <[email protected]>
> > > ---
> > > .../bindings/i3c/snps,dw-i3c-master.txt | 41 ---------------
> > > .../bindings/i3c/snps,dw-i3c-master.yaml | 52 +++++++++++++++++++
> > > 2 files changed, 52 insertions(+), 41 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > deleted file mode 100644
> > > index 07f35f36085d..000000000000
> > > --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > +++ /dev/null
> > > @@ -1,41 +0,0 @@
> > > -Bindings for Synopsys DesignWare I3C master block
> > > -=================================================
> > > -
> > > -Required properties:
> > > ---------------------
> > > -- compatible: shall be "snps,dw-i3c-master-1.00a"
> > > -- clocks: shall reference the core_clk
> > > -- interrupts: the interrupt line connected to this I3C master
> > > -- reg: Offset and length of I3C master registers
> > > -
> > > -Mandatory properties defined by the generic binding (see
> > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > > -
> > > -- #address-cells: shall be set to 3
> > > -- #size-cells: shall be set to 0
> > > -
> > > -Optional properties defined by the generic binding (see
> > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > > -
> > > -- i2c-scl-hz
> > > -- i3c-scl-hz
> > > -
> > > -I3C device connected on the bus follow the generic description (see
> > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
> > > -
> > > -Example:
> > > -
> > > - i3c-master@2000 {
> > > - compatible = "snps,dw-i3c-master-1.00a";
> > > - #address-cells = <3>;
> > > - #size-cells = <0>;
> > > - reg = <0x02000 0x1000>;
> > > - interrupts = <0>;
> > > - clocks = <&i3cclk>;
> > > -
> > > - eeprom@57{
> > > - compatible = "atmel,24c01";
> > > - reg = <0x57 0x0 0x10>;
> > > - pagesize = <0x8>;
> > > - };
> > > - };
> > > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > > new file mode 100644
> > > index 000000000000..5b8b43e6f1e4
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > > @@ -0,0 +1,52 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Synopsys DesignWare I3C master block
> > > +
> > > +maintainers:
> > > + - Vitor Soares <[email protected]>
> >
> > And it bounces. Someone else want it?
> >
>
> Probably no one but me.
Can you change it to yourself when applying?
Rob
On 25/04/2022 14:47:33-0500, Rob Herring wrote:
> On Fri, Apr 22, 2022 at 09:37:01PM +0200, Alexandre Belloni wrote:
> > On 22/04/2022 14:28:53-0500, Rob Herring wrote:
> > > On Fri, Apr 22, 2022 at 2:22 PM Rob Herring <[email protected]> wrote:
> > > >
> > > > Convert the Synopsys Designware I3C master to DT schema format.
> > > >
> > > > Signed-off-by: Rob Herring <[email protected]>
> > > > ---
> > > > .../bindings/i3c/snps,dw-i3c-master.txt | 41 ---------------
> > > > .../bindings/i3c/snps,dw-i3c-master.yaml | 52 +++++++++++++++++++
> > > > 2 files changed, 52 insertions(+), 41 deletions(-)
> > > > delete mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > > create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > > deleted file mode 100644
> > > > index 07f35f36085d..000000000000
> > > > --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> > > > +++ /dev/null
> > > > @@ -1,41 +0,0 @@
> > > > -Bindings for Synopsys DesignWare I3C master block
> > > > -=================================================
> > > > -
> > > > -Required properties:
> > > > ---------------------
> > > > -- compatible: shall be "snps,dw-i3c-master-1.00a"
> > > > -- clocks: shall reference the core_clk
> > > > -- interrupts: the interrupt line connected to this I3C master
> > > > -- reg: Offset and length of I3C master registers
> > > > -
> > > > -Mandatory properties defined by the generic binding (see
> > > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > > > -
> > > > -- #address-cells: shall be set to 3
> > > > -- #size-cells: shall be set to 0
> > > > -
> > > > -Optional properties defined by the generic binding (see
> > > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
> > > > -
> > > > -- i2c-scl-hz
> > > > -- i3c-scl-hz
> > > > -
> > > > -I3C device connected on the bus follow the generic description (see
> > > > -Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
> > > > -
> > > > -Example:
> > > > -
> > > > - i3c-master@2000 {
> > > > - compatible = "snps,dw-i3c-master-1.00a";
> > > > - #address-cells = <3>;
> > > > - #size-cells = <0>;
> > > > - reg = <0x02000 0x1000>;
> > > > - interrupts = <0>;
> > > > - clocks = <&i3cclk>;
> > > > -
> > > > - eeprom@57{
> > > > - compatible = "atmel,24c01";
> > > > - reg = <0x57 0x0 0x10>;
> > > > - pagesize = <0x8>;
> > > > - };
> > > > - };
> > > > diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > > > new file mode 100644
> > > > index 000000000000..5b8b43e6f1e4
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
> > > > @@ -0,0 +1,52 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Synopsys DesignWare I3C master block
> > > > +
> > > > +maintainers:
> > > > + - Vitor Soares <[email protected]>
> > >
> > > And it bounces. Someone else want it?
> > >
> >
> > Probably no one but me.
>
> Can you change it to yourself when applying?
>
Done!
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com