Hi,
In March I reported that a randconfig build complained:
ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
(https://lore.kernel.org/all/[email protected]/)
I am still seeing this problem so I tried to dig into it a bit.
However, I don't see why get_next_modinfo() and friends don't find the
MODULE_LICENSE() since it is in the iio-rescale.o file.
(BTW, I see this build error on many different $ARCH [around 15 tested]
and with 2 different versions of GCC.)
Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
strings?
It looks like it is, because it appears (?) that modpost is looking at
drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
loadable module).
Is this confusing modpost?
I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
Makefile entry accordingly and the MODULE_LICENSE error goes away.
Is this a modpost error or is kunit messing things up?
thanks for looking.
--
~Randy
Ok, one more.
[also adding Liam here]
On 5/20/22 20:17, Randy Dunlap wrote:
>
>
> On 5/20/22 20:08, Randy Dunlap wrote:
>>
>>
>> On 5/20/22 19:40, Randy Dunlap wrote:
>>> Hi,
>>>
>>> In March I reported that a randconfig build complained:
>>>
>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>>>
>>> (https://lore.kernel.org/all/[email protected]/)
>>>
>>> I am still seeing this problem so I tried to dig into it a bit.
>>> However, I don't see why get_next_modinfo() and friends don't find the
>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
>>>
>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
>>> and with 2 different versions of GCC.)
>>>
>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
>>> strings?
>>>
>>> It looks like it is, because it appears (?) that modpost is looking at
>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
>>> loadable module).
>>>
>>> Is this confusing modpost?
>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>>
>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
>> build errors, so that's not a solution, just some info...
>
> and that was due to not updating drivers/iio/test/Makefile.
> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
>
>>
>>> Is this a modpost error or is kunit messing things up?
>>>
>>> thanks for looking.
Does this look OK? It allows afe/iio-rescale.o to build XOR
test/iio-rescale.o (not both of them).
--- a/drivers/iio/test/Kconfig
+++ b/drivers/iio/test/Kconfig
@@ -6,7 +6,7 @@
# Keep in alphabetical order
config IIO_RESCALE_KUNIT_TEST
bool "Test IIO rescale conversion functions"
- depends on KUNIT=y && !IIO_RESCALE
+ depends on KUNIT=y && IIO_RESCALE=n
default KUNIT_ALL_TESTS
help
If you want to run tests on the iio-rescale code say Y here.
--
~Randy
On Sat, May 21, 2022 at 11:40 AM Randy Dunlap <[email protected]> wrote:
>
> Hi,
>
> In March I reported that a randconfig build complained:
>
> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>
> (https://lore.kernel.org/all/[email protected]/)
>
> I am still seeing this problem so I tried to dig into it a bit.
> However, I don't see why get_next_modinfo() and friends don't find the
> MODULE_LICENSE() since it is in the iio-rescale.o file.
>
> (BTW, I see this build error on many different $ARCH [around 15 tested]
> and with 2 different versions of GCC.)
>
> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
> strings?
MODULE_LICENSE() is no-op for vmlinux.
modpost checks this only for modules.
>
> It looks like it is, because it appears (?) that modpost is looking at
> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
> loadable module).
>
> Is this confusing modpost?
> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>
> Is this a modpost error or is kunit messing things up?
>
> thanks for looking.
> --
> ~Randy
--
Best Regards
Masahiro Yamada
On 5/20/22 21:14, Masahiro Yamada wrote:
> On Sat, May 21, 2022 at 12:51 PM Randy Dunlap <[email protected]> wrote:
>>
>> Ok, one more.
>> [also adding Liam here]
>>
>> On 5/20/22 20:17, Randy Dunlap wrote:
>>>
>>>
>>> On 5/20/22 20:08, Randy Dunlap wrote:
>>>>
>>>>
>>>> On 5/20/22 19:40, Randy Dunlap wrote:
>>>>> Hi,
>>>>>
>>>>> In March I reported that a randconfig build complained:
>>>>>
>>>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>>>>>
>>>>> (https://lore.kernel.org/all/[email protected]/)
>>>>>
>>>>> I am still seeing this problem so I tried to dig into it a bit.
>>>>> However, I don't see why get_next_modinfo() and friends don't find the
>>>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
>>>>>
>>>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
>>>>> and with 2 different versions of GCC.)
>>>>>
>>>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
>>>>> strings?
>>>>>
>>>>> It looks like it is, because it appears (?) that modpost is looking at
>>>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
>>>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
>>>>> loadable module).
>>>>>
>>>>> Is this confusing modpost?
>>>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
>>>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>>>>
>>>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
>>>> build errors, so that's not a solution, just some info...
>>>
>>> and that was due to not updating drivers/iio/test/Makefile.
>>> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
>>>
>>>>
>>>>> Is this a modpost error or is kunit messing things up?
>>>>>
>>>>> thanks for looking.
>>
>> Does this look OK? It allows afe/iio-rescale.o to build XOR
>> test/iio-rescale.o (not both of them).
>>
>> --- a/drivers/iio/test/Kconfig
>> +++ b/drivers/iio/test/Kconfig
>> @@ -6,7 +6,7 @@
>> # Keep in alphabetical order
>> config IIO_RESCALE_KUNIT_TEST
>> bool "Test IIO rescale conversion functions"
>> - depends on KUNIT=y && !IIO_RESCALE
>> + depends on KUNIT=y && IIO_RESCALE=n
>> default KUNIT_ALL_TESTS
>> help
>> If you want to run tests on the iio-rescale code say Y here.
>>
>>
>> --
>> ~Randy
>
>
>
> As you may have already noticed,
> the root cause is drivers/iio/test/Makefile
>
> obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
>
>
>
> For the combination of
> CONFIG_IIO_RESCALE=m
> CONFIG_IIO_RESCALE_KUNIT_TEST=y,
>
> drivers/iio/afe/iio-rescale.o is built twice;
> as modular by drivers/iio/afe/Makefile, and
> as built-in by drivers/iio/test/Makefile.
>
> That's why MODULE_LICENSE() is lost.
>
>
> I think your solution will work
> although this Makefile is not recommended.
Yeah, I don't care for how that is done either.
--
~Randy
On Sat, May 21, 2022 at 12:51 PM Randy Dunlap <[email protected]> wrote:
>
> Ok, one more.
> [also adding Liam here]
>
> On 5/20/22 20:17, Randy Dunlap wrote:
> >
> >
> > On 5/20/22 20:08, Randy Dunlap wrote:
> >>
> >>
> >> On 5/20/22 19:40, Randy Dunlap wrote:
> >>> Hi,
> >>>
> >>> In March I reported that a randconfig build complained:
> >>>
> >>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
> >>>
> >>> (https://lore.kernel.org/all/[email protected]/)
> >>>
> >>> I am still seeing this problem so I tried to dig into it a bit.
> >>> However, I don't see why get_next_modinfo() and friends don't find the
> >>> MODULE_LICENSE() since it is in the iio-rescale.o file.
> >>>
> >>> (BTW, I see this build error on many different $ARCH [around 15 tested]
> >>> and with 2 different versions of GCC.)
> >>>
> >>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
> >>> strings?
> >>>
> >>> It looks like it is, because it appears (?) that modpost is looking at
> >>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
> >>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
> >>> loadable module).
> >>>
> >>> Is this confusing modpost?
> >>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
> >>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
> >>
> >> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
> >> build errors, so that's not a solution, just some info...
> >
> > and that was due to not updating drivers/iio/test/Makefile.
> > When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
> >
> >>
> >>> Is this a modpost error or is kunit messing things up?
> >>>
> >>> thanks for looking.
>
> Does this look OK? It allows afe/iio-rescale.o to build XOR
> test/iio-rescale.o (not both of them).
>
> --- a/drivers/iio/test/Kconfig
> +++ b/drivers/iio/test/Kconfig
> @@ -6,7 +6,7 @@
> # Keep in alphabetical order
> config IIO_RESCALE_KUNIT_TEST
> bool "Test IIO rescale conversion functions"
> - depends on KUNIT=y && !IIO_RESCALE
> + depends on KUNIT=y && IIO_RESCALE=n
> default KUNIT_ALL_TESTS
> help
> If you want to run tests on the iio-rescale code say Y here.
>
>
> --
> ~Randy
As you may have already noticed,
the root cause is drivers/iio/test/Makefile
obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
For the combination of
CONFIG_IIO_RESCALE=m
CONFIG_IIO_RESCALE_KUNIT_TEST=y,
drivers/iio/afe/iio-rescale.o is built twice;
as modular by drivers/iio/afe/Makefile, and
as built-in by drivers/iio/test/Makefile.
That's why MODULE_LICENSE() is lost.
I think your solution will work
although this Makefile is not recommended.
--
Best Regards
Masahiro Yamada
On 5/20/22 19:40, Randy Dunlap wrote:
> Hi,
>
> In March I reported that a randconfig build complained:
>
> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>
> (https://lore.kernel.org/all/[email protected]/)
>
> I am still seeing this problem so I tried to dig into it a bit.
> However, I don't see why get_next_modinfo() and friends don't find the
> MODULE_LICENSE() since it is in the iio-rescale.o file.
>
> (BTW, I see this build error on many different $ARCH [around 15 tested]
> and with 2 different versions of GCC.)
>
> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
> strings?
>
> It looks like it is, because it appears (?) that modpost is looking at
> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
> loadable module).
>
> Is this confusing modpost?
> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
> Makefile entry accordingly and the MODULE_LICENSE error goes away.
Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
build errors, so that's not a solution, just some info...
> Is this a modpost error or is kunit messing things up?
>
> thanks for looking.
--
~Randy
On 5/20/22 20:08, Randy Dunlap wrote:
>
>
> On 5/20/22 19:40, Randy Dunlap wrote:
>> Hi,
>>
>> In March I reported that a randconfig build complained:
>>
>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>>
>> (https://lore.kernel.org/all/[email protected]/)
>>
>> I am still seeing this problem so I tried to dig into it a bit.
>> However, I don't see why get_next_modinfo() and friends don't find the
>> MODULE_LICENSE() since it is in the iio-rescale.o file.
>>
>> (BTW, I see this build error on many different $ARCH [around 15 tested]
>> and with 2 different versions of GCC.)
>>
>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
>> strings?
>>
>> It looks like it is, because it appears (?) that modpost is looking at
>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
>> loadable module).
>>
>> Is this confusing modpost?
>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>
> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
> build errors, so that's not a solution, just some info...
and that was due to not updating drivers/iio/test/Makefile.
When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
>
>> Is this a modpost error or is kunit messing things up?
>>
>> thanks for looking.
>
--
~Randy
Liam:
Any comment on this?
Otherwise I'll just send a formal patch like this (below).
Thanks.
On 5/20/22 20:51, Randy Dunlap wrote:
> Ok, one more.
> [also adding Liam here]
>
> On 5/20/22 20:17, Randy Dunlap wrote:
>>
>>
>> On 5/20/22 20:08, Randy Dunlap wrote:
>>>
>>>
>>> On 5/20/22 19:40, Randy Dunlap wrote:
>>>> Hi,
>>>>
>>>> In March I reported that a randconfig build complained:
>>>>
>>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>>>>
>>>> (https://lore.kernel.org/all/[email protected]/)
>>>>
>>>> I am still seeing this problem so I tried to dig into it a bit.
>>>> However, I don't see why get_next_modinfo() and friends don't find the
>>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
>>>>
>>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
>>>> and with 2 different versions of GCC.)
>>>>
>>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
>>>> strings?
>>>>
>>>> It looks like it is, because it appears (?) that modpost is looking at
>>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
>>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
>>>> loadable module).
>>>>
>>>> Is this confusing modpost?
>>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
>>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>>>
>>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
>>> build errors, so that's not a solution, just some info...
>>
>> and that was due to not updating drivers/iio/test/Makefile.
>> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
>>
>>>
>>>> Is this a modpost error or is kunit messing things up?
>>>>
>>>> thanks for looking.
>
> Does this look OK? It allows afe/iio-rescale.o to build XOR
> test/iio-rescale.o (not both of them).
>
> --- a/drivers/iio/test/Kconfig
> +++ b/drivers/iio/test/Kconfig
> @@ -6,7 +6,7 @@
> # Keep in alphabetical order
> config IIO_RESCALE_KUNIT_TEST
> bool "Test IIO rescale conversion functions"
> - depends on KUNIT=y && !IIO_RESCALE
> + depends on KUNIT=y && IIO_RESCALE=n
> default KUNIT_ALL_TESTS
> help
> If you want to run tests on the iio-rescale code say Y here.
>
>
--
~Randy
On 5/26/22 09:04, Liam Beguin wrote:
> Hi Randy,
>
> On Thu, May 26, 2022 at 08:36:34AM -0700, Randy Dunlap wrote:
>> Liam:
>>
>> Any comment on this?
>> Otherwise I'll just send a formal patch like this (below).
>
> Apologies for not answering earlier.
>
> I wanted to look more into Masahiro's comment and try to fix the
> Makefile, but that can be done after.
>
> IMO your patch improves the current Kconfig, so I'd recommend sending
> the patch. If it can wait a bit, I can look at the Makefile over the
> weekend.
>
Liam,
I'll wait until next week to see if you come up with anything.
Thanks.
>
>>
>> Thanks.
>>
>> On 5/20/22 20:51, Randy Dunlap wrote:
>>> Ok, one more.
>>> [also adding Liam here]
>>>
>>> On 5/20/22 20:17, Randy Dunlap wrote:
>>>>
>>>>
>>>> On 5/20/22 20:08, Randy Dunlap wrote:
>>>>>
>>>>>
>>>>> On 5/20/22 19:40, Randy Dunlap wrote:
>>>>>> Hi,
>>>>>>
>>>>>> In March I reported that a randconfig build complained:
>>>>>>
>>>>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
>>>>>>
>>>>>> (https://lore.kernel.org/all/[email protected]/)
>>>>>>
>>>>>> I am still seeing this problem so I tried to dig into it a bit.
>>>>>> However, I don't see why get_next_modinfo() and friends don't find the
>>>>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
>>>>>>
>>>>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
>>>>>> and with 2 different versions of GCC.)
>>>>>>
>>>>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
>>>>>> strings?
>>>>>>
>>>>>> It looks like it is, because it appears (?) that modpost is looking at
>>>>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
>>>>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
>>>>>> loadable module).
>>>>>>
>>>>>> Is this confusing modpost?
>>>>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
>>>>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
>>>>>
>>>>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
>>>>> build errors, so that's not a solution, just some info...
>>>>
>>>> and that was due to not updating drivers/iio/test/Makefile.
>>>> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
>>>>
>>>>>
>>>>>> Is this a modpost error or is kunit messing things up?
>>>>>>
>>>>>> thanks for looking.
>>>
>>> Does this look OK? It allows afe/iio-rescale.o to build XOR
>>> test/iio-rescale.o (not both of them).
>>>
>>> --- a/drivers/iio/test/Kconfig
>>> +++ b/drivers/iio/test/Kconfig
>>> @@ -6,7 +6,7 @@
>>> # Keep in alphabetical order
>>> config IIO_RESCALE_KUNIT_TEST
>>> bool "Test IIO rescale conversion functions"
>>> - depends on KUNIT=y && !IIO_RESCALE
>>> + depends on KUNIT=y && IIO_RESCALE=n
>>> default KUNIT_ALL_TESTS
>>> help
>>> If you want to run tests on the iio-rescale code say Y here.
>>>
>>>
>>
>> --
>> ~Randy
--
~Randy
Hi Randy,
On Thu, May 26, 2022 at 08:36:34AM -0700, Randy Dunlap wrote:
> Liam:
>
> Any comment on this?
> Otherwise I'll just send a formal patch like this (below).
Apologies for not answering earlier.
I wanted to look more into Masahiro's comment and try to fix the
Makefile, but that can be done after.
IMO your patch improves the current Kconfig, so I'd recommend sending
the patch. If it can wait a bit, I can look at the Makefile over the
weekend.
Cheers,
Liam
>
> Thanks.
>
> On 5/20/22 20:51, Randy Dunlap wrote:
> > Ok, one more.
> > [also adding Liam here]
> >
> > On 5/20/22 20:17, Randy Dunlap wrote:
> >>
> >>
> >> On 5/20/22 20:08, Randy Dunlap wrote:
> >>>
> >>>
> >>> On 5/20/22 19:40, Randy Dunlap wrote:
> >>>> Hi,
> >>>>
> >>>> In March I reported that a randconfig build complained:
> >>>>
> >>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
> >>>>
> >>>> (https://lore.kernel.org/all/[email protected]/)
> >>>>
> >>>> I am still seeing this problem so I tried to dig into it a bit.
> >>>> However, I don't see why get_next_modinfo() and friends don't find the
> >>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
> >>>>
> >>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
> >>>> and with 2 different versions of GCC.)
> >>>>
> >>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
> >>>> strings?
> >>>>
> >>>> It looks like it is, because it appears (?) that modpost is looking at
> >>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
> >>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
> >>>> loadable module).
> >>>>
> >>>> Is this confusing modpost?
> >>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
> >>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
> >>>
> >>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
> >>> build errors, so that's not a solution, just some info...
> >>
> >> and that was due to not updating drivers/iio/test/Makefile.
> >> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
> >>
> >>>
> >>>> Is this a modpost error or is kunit messing things up?
> >>>>
> >>>> thanks for looking.
> >
> > Does this look OK? It allows afe/iio-rescale.o to build XOR
> > test/iio-rescale.o (not both of them).
> >
> > --- a/drivers/iio/test/Kconfig
> > +++ b/drivers/iio/test/Kconfig
> > @@ -6,7 +6,7 @@
> > # Keep in alphabetical order
> > config IIO_RESCALE_KUNIT_TEST
> > bool "Test IIO rescale conversion functions"
> > - depends on KUNIT=y && !IIO_RESCALE
> > + depends on KUNIT=y && IIO_RESCALE=n
> > default KUNIT_ALL_TESTS
> > help
> > If you want to run tests on the iio-rescale code say Y here.
> >
> >
>
> --
> ~Randy
Hi Randy,
On Thu, May 26, 2022 at 01:04:41PM -0700, Randy Dunlap wrote:
>
>
> On 5/26/22 09:04, Liam Beguin wrote:
> > Hi Randy,
> >
> > On Thu, May 26, 2022 at 08:36:34AM -0700, Randy Dunlap wrote:
> >> Liam:
> >>
> >> Any comment on this?
> >> Otherwise I'll just send a formal patch like this (below).
> >
> > Apologies for not answering earlier.
> >
> > I wanted to look more into Masahiro's comment and try to fix the
> > Makefile, but that can be done after.
> >
> > IMO your patch improves the current Kconfig, so I'd recommend sending
> > the patch. If it can wait a bit, I can look at the Makefile over the
> > weekend.
> >
>
> Liam,
>
> I'll wait until next week to see if you come up with anything.
>
The following patch fixes the issue while addressing Masahiro's comment.
I also considered `select IIO_RESCALE`, but I'm not sure what's usually
preferred.
diff --git a/drivers/iio/test/Kconfig b/drivers/iio/test/Kconfig
index 56ca0ad7e77a..4c66c3f18c34 100644
--- a/drivers/iio/test/Kconfig
+++ b/drivers/iio/test/Kconfig
@@ -6,7 +6,7 @@
# Keep in alphabetical order
config IIO_RESCALE_KUNIT_TEST
bool "Test IIO rescale conversion functions"
- depends on KUNIT=y && !IIO_RESCALE
+ depends on KUNIT=y && IIO_RESCALE=y
default KUNIT_ALL_TESTS
help
If you want to run tests on the iio-rescale code say Y here.
diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile
index f15ae0a6394f..880360f8d02c 100644
--- a/drivers/iio/test/Makefile
+++ b/drivers/iio/test/Makefile
@@ -4,6 +4,6 @@
#
# Keep in alphabetical order
-obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
+obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o
obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o
CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
I'll send a patch as soon as you confirm this works for you too.
Cheers,
Liam
>
> >
> >>
> >> Thanks.
> >>
> >> On 5/20/22 20:51, Randy Dunlap wrote:
> >>> Ok, one more.
> >>> [also adding Liam here]
> >>>
> >>> On 5/20/22 20:17, Randy Dunlap wrote:
> >>>>
> >>>>
> >>>> On 5/20/22 20:08, Randy Dunlap wrote:
> >>>>>
> >>>>>
> >>>>> On 5/20/22 19:40, Randy Dunlap wrote:
> >>>>>> Hi,
> >>>>>>
> >>>>>> In March I reported that a randconfig build complained:
> >>>>>>
> >>>>>> ERROR: modpost: missing MODULE_LICENSE() in drivers/iio/afe/iio-rescale.o
> >>>>>>
> >>>>>> (https://lore.kernel.org/all/[email protected]/)
> >>>>>>
> >>>>>> I am still seeing this problem so I tried to dig into it a bit.
> >>>>>> However, I don't see why get_next_modinfo() and friends don't find the
> >>>>>> MODULE_LICENSE() since it is in the iio-rescale.o file.
> >>>>>>
> >>>>>> (BTW, I see this build error on many different $ARCH [around 15 tested]
> >>>>>> and with 2 different versions of GCC.)
> >>>>>>
> >>>>>> Q1: Is modpost checking both vmlinux and iio-rescale.o for modinfo license
> >>>>>> strings?
> >>>>>>
> >>>>>> It looks like it is, because it appears (?) that modpost is looking at
> >>>>>> drivers/iio/test/iio-test-rescale.o (<<<<< a kunit test, which is builtin
> >>>>>> in my .config) and at drivers/iio/afe/iio-rescale.o (which is built as a
> >>>>>> loadable module).
> >>>>>>
> >>>>>> Is this confusing modpost?
> >>>>>> I renamed drivers/iio/afe/iio-rescale.c to afe-rescale.c and changed its
> >>>>>> Makefile entry accordingly and the MODULE_LICENSE error goes away.
> >>>>>
> >>>>> Oh well. This rename causes drivers/iio/test/iio-test-rescale.c to have
> >>>>> build errors, so that's not a solution, just some info...
> >>>>
> >>>> and that was due to not updating drivers/iio/test/Makefile.
> >>>> When that is done, the missing MODULE_LICENSE() is back in afe-rescale.o.
> >>>>
> >>>>>
> >>>>>> Is this a modpost error or is kunit messing things up?
> >>>>>>
> >>>>>> thanks for looking.
> >>>
> >>> Does this look OK? It allows afe/iio-rescale.o to build XOR
> >>> test/iio-rescale.o (not both of them).
> >>>
> >>> --- a/drivers/iio/test/Kconfig
> >>> +++ b/drivers/iio/test/Kconfig
> >>> @@ -6,7 +6,7 @@
> >>> # Keep in alphabetical order
> >>> config IIO_RESCALE_KUNIT_TEST
> >>> bool "Test IIO rescale conversion functions"
> >>> - depends on KUNIT=y && !IIO_RESCALE
> >>> + depends on KUNIT=y && IIO_RESCALE=n
> >>> default KUNIT_ALL_TESTS
> >>> help
> >>> If you want to run tests on the iio-rescale code say Y here.
> >>>
> >>>
> >>
> >> --
> >> ~Randy
>
> --
> ~Randy
On 5/29/22 14:20, Liam Beguin wrote:
> Hi Randy,
>
> On Thu, May 26, 2022 at 01:04:41PM -0700, Randy Dunlap wrote:
>>
>>
>> On 5/26/22 09:04, Liam Beguin wrote:
>>> Hi Randy,
>>>
>>> On Thu, May 26, 2022 at 08:36:34AM -0700, Randy Dunlap wrote:
>>>> Liam:
>>>>
>>>> Any comment on this?
>>>> Otherwise I'll just send a formal patch like this (below).
>>>
>>> Apologies for not answering earlier.
>>>
>>> I wanted to look more into Masahiro's comment and try to fix the
>>> Makefile, but that can be done after.
>>>
>>> IMO your patch improves the current Kconfig, so I'd recommend sending
>>> the patch. If it can wait a bit, I can look at the Makefile over the
>>> weekend.
>>>
>>
>> Liam,
>>
>> I'll wait until next week to see if you come up with anything.
>>
>
> The following patch fixes the issue while addressing Masahiro's comment.
> I also considered `select IIO_RESCALE`, but I'm not sure what's usually
> preferred.
>
> diff --git a/drivers/iio/test/Kconfig b/drivers/iio/test/Kconfig
> index 56ca0ad7e77a..4c66c3f18c34 100644
> --- a/drivers/iio/test/Kconfig
> +++ b/drivers/iio/test/Kconfig
> @@ -6,7 +6,7 @@
> # Keep in alphabetical order
> config IIO_RESCALE_KUNIT_TEST
> bool "Test IIO rescale conversion functions"
> - depends on KUNIT=y && !IIO_RESCALE
> + depends on KUNIT=y && IIO_RESCALE=y
> default KUNIT_ALL_TESTS
> help
> If you want to run tests on the iio-rescale code say Y here.
> diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile
> index f15ae0a6394f..880360f8d02c 100644
> --- a/drivers/iio/test/Makefile
> +++ b/drivers/iio/test/Makefile
> @@ -4,6 +4,6 @@
> #
>
> # Keep in alphabetical order
> -obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
> +obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o
> obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o
> CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
>
> I'll send a patch as soon as you confirm this works for you too.
Looks good. Thanks.
Acked-by: Randy Dunlap <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
--
~Randy
On Mon, May 30, 2022 at 9:17 AM Randy Dunlap <[email protected]> wrote:
>
>
>
> On 5/29/22 14:20, Liam Beguin wrote:
> > Hi Randy,
> >
> > On Thu, May 26, 2022 at 01:04:41PM -0700, Randy Dunlap wrote:
> >>
> >>
> >> On 5/26/22 09:04, Liam Beguin wrote:
> >>> Hi Randy,
> >>>
> >>> On Thu, May 26, 2022 at 08:36:34AM -0700, Randy Dunlap wrote:
> >>>> Liam:
> >>>>
> >>>> Any comment on this?
> >>>> Otherwise I'll just send a formal patch like this (below).
> >>>
> >>> Apologies for not answering earlier.
> >>>
> >>> I wanted to look more into Masahiro's comment and try to fix the
> >>> Makefile, but that can be done after.
> >>>
> >>> IMO your patch improves the current Kconfig, so I'd recommend sending
> >>> the patch. If it can wait a bit, I can look at the Makefile over the
> >>> weekend.
> >>>
> >>
> >> Liam,
> >>
> >> I'll wait until next week to see if you come up with anything.
> >>
> >
> > The following patch fixes the issue while addressing Masahiro's comment.
> > I also considered `select IIO_RESCALE`, but I'm not sure what's usually
> > preferred.
> >
> > diff --git a/drivers/iio/test/Kconfig b/drivers/iio/test/Kconfig
> > index 56ca0ad7e77a..4c66c3f18c34 100644
> > --- a/drivers/iio/test/Kconfig
> > +++ b/drivers/iio/test/Kconfig
> > @@ -6,7 +6,7 @@
> > # Keep in alphabetical order
> > config IIO_RESCALE_KUNIT_TEST
> > bool "Test IIO rescale conversion functions"
> > - depends on KUNIT=y && !IIO_RESCALE
> > + depends on KUNIT=y && IIO_RESCALE=y
> > default KUNIT_ALL_TESTS
> > help
> > If you want to run tests on the iio-rescale code say Y here.
> > diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile
> > index f15ae0a6394f..880360f8d02c 100644
> > --- a/drivers/iio/test/Makefile
> > +++ b/drivers/iio/test/Makefile
> > @@ -4,6 +4,6 @@
> > #
> >
> > # Keep in alphabetical order
> > -obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o ../afe/iio-rescale.o
> > +obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o
> > obj-$(CONFIG_IIO_TEST_FORMAT) += iio-test-format.o
> > CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN)
> >
> > I'll send a patch as soon as you confirm this works for you too.
>
> Looks good. Thanks.
>
> Acked-by: Randy Dunlap <[email protected]>
> Tested-by: Randy Dunlap <[email protected]>
>
> --
> ~Randy
Reviewed-by: Masahiro Yamada <[email protected]>
--
Best Regards
Masahiro Yamada