This introduces support for the Aspeed JPEG format, where the new frame
can refer to previous frame to reduce the amount of compressed data.
The concept is similar to I/P frame of video compression. It will
compare the new frame with previous one to decide which macroblock's
data is changed, and only the changed macroblocks will be compressed.
This Aspeed JPEG format is used by the video engine on Aspeed platforms,
which is generally adapted for remote KVM.
Signed-off-by: Jammy Huang <[email protected]>
---
.../userspace-api/media/v4l/pixfmt-reserved.rst | 17 +++++++++++++++++
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/uapi/linux/videodev2.h | 1 +
3 files changed, 19 insertions(+)
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
index 0ff68cd8cf62..f62bc76d606f 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
@@ -258,6 +258,23 @@ please make a proposal on the linux-media mailing list.
and it is used by various multimedia hardware blocks like GPU, display
controllers, ISP and video accelerators.
It contains four planes for progressive video.
+ * .. _V4L2-PIX-FMT-AJPG:
+
+ - ``V4L2_PIX_FMT_AJPG``
+ - 'AJPG'
+ - ASPEED JPEG format used by the aspeed-video driver on Aspeed platforms,
+ which is generally adapted for remote KVM.
+ On each frame compression, I will compare the new frame with previous
+ one to decide which macroblock's data is changed, and only the changed
+ macroblocks will be compressed.
+
+ The implementation is based on AST2600 A3 datasheet, revision 0.9, which
+ is not publicly available. Or you can reference Video stream data format
+ – ASPEED mode compression of SDK_User_Guide which available on
+ AspeedTech-BMC/openbmc/releases.
+
+ Decoder's implementation can be found here,
+ `https://github.com/AspeedTech-BMC/aspeed_codec/ <https://github.com/AspeedTech-BMC/aspeed_codec/>`__
.. raw:: latex
\normalsize
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index a1a1b51ac599..c72bc3410bee 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1497,6 +1497,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
case V4L2_PIX_FMT_MT21C: descr = "Mediatek Compressed Format"; break;
case V4L2_PIX_FMT_QC08C: descr = "QCOM Compressed 8-bit Format"; break;
case V4L2_PIX_FMT_QC10C: descr = "QCOM Compressed 10-bit Format"; break;
+ case V4L2_PIX_FMT_AJPG: descr = "Aspeed JPEG"; break;
default:
if (fmt->description[0])
return;
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 86cae23cc446..870a7e5ef8ca 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -775,6 +775,7 @@ struct v4l2_pix_format {
#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */
#define V4L2_PIX_FMT_QC08C v4l2_fourcc('Q', '0', '8', 'C') /* Qualcomm 8-bit compressed */
#define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
+#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
/* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
#define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
--
2.25.1
Hi Jammy,
Thanks for the update.
On Wed, Sep 21, 2022 at 10:51:09AM +0800, Jammy Huang wrote:
> This introduces support for the Aspeed JPEG format, where the new frame
> can refer to previous frame to reduce the amount of compressed data.
> The concept is similar to I/P frame of video compression. It will
> compare the new frame with previous one to decide which macroblock's
> data is changed, and only the changed macroblocks will be compressed.
>
> This Aspeed JPEG format is used by the video engine on Aspeed platforms,
> which is generally adapted for remote KVM.
>
> Signed-off-by: Jammy Huang <[email protected]>
> ---
> .../userspace-api/media/v4l/pixfmt-reserved.rst | 17 +++++++++++++++++
> drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> include/uapi/linux/videodev2.h | 1 +
> 3 files changed, 19 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> index 0ff68cd8cf62..f62bc76d606f 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
> @@ -258,6 +258,23 @@ please make a proposal on the linux-media mailing list.
> and it is used by various multimedia hardware blocks like GPU, display
> controllers, ISP and video accelerators.
> It contains four planes for progressive video.
> + * .. _V4L2-PIX-FMT-AJPG:
> +
> + - ``V4L2_PIX_FMT_AJPG``
> + - 'AJPG'
> + - ASPEED JPEG format used by the aspeed-video driver on Aspeed platforms,
> + which is generally adapted for remote KVM.
> + On each frame compression, I will compare the new frame with previous
> + one to decide which macroblock's data is changed, and only the changed
> + macroblocks will be compressed.
> +
> + The implementation is based on AST2600 A3 datasheet, revision 0.9, which
> + is not publicly available. Or you can reference Video stream data format
> + – ASPEED mode compression of SDK_User_Guide which available on
> + AspeedTech-BMC/openbmc/releases.
> +
> + Decoder's implementation can be found here,
> + `https://github.com/AspeedTech-BMC/aspeed_codec/ <https://github.com/AspeedTech-BMC/aspeed_codec/>`__
This is better than the previous versions.
Can you still run
$ scripts/checkpatch.pl --strict --max-line-length=80
?
On the decoder --- which values is the user supposed to use for mode_420,
selector and advance_selector parameters? I think this needs to be
documented.
> .. raw:: latex
>
> \normalsize
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index a1a1b51ac599..c72bc3410bee 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1497,6 +1497,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_MT21C: descr = "Mediatek Compressed Format"; break;
> case V4L2_PIX_FMT_QC08C: descr = "QCOM Compressed 8-bit Format"; break;
> case V4L2_PIX_FMT_QC10C: descr = "QCOM Compressed 10-bit Format"; break;
> + case V4L2_PIX_FMT_AJPG: descr = "Aspeed JPEG"; break;
> default:
> if (fmt->description[0])
> return;
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 86cae23cc446..870a7e5ef8ca 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -775,6 +775,7 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */
> #define V4L2_PIX_FMT_QC08C v4l2_fourcc('Q', '0', '8', 'C') /* Qualcomm 8-bit compressed */
> #define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
> +#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
>
> /* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
> #define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
--
Kind regards,
Sakari Ailus
Hi Sakari,
Thanks for your review.
On 2022/9/23 下午 08:56, Sakari Ailus wrote:
> Hi Jammy,
>
> Thanks for the update.
>
> On Wed, Sep 21, 2022 at 10:51:09AM +0800, Jammy Huang wrote:
>> This introduces support for the Aspeed JPEG format, where the new frame
>> can refer to previous frame to reduce the amount of compressed data.
>> The concept is similar to I/P frame of video compression. It will
>> compare the new frame with previous one to decide which macroblock's
>> data is changed, and only the changed macroblocks will be compressed.
>>
>> This Aspeed JPEG format is used by the video engine on Aspeed platforms,
>> which is generally adapted for remote KVM.
>>
>> Signed-off-by: Jammy Huang <[email protected]>
>> ---
>> .../userspace-api/media/v4l/pixfmt-reserved.rst | 17 +++++++++++++++++
>> drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
>> include/uapi/linux/videodev2.h | 1 +
>> 3 files changed, 19 insertions(+)
>>
>> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
>> index 0ff68cd8cf62..f62bc76d606f 100644
>> --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
>> +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst
>> @@ -258,6 +258,23 @@ please make a proposal on the linux-media mailing list.
>> and it is used by various multimedia hardware blocks like GPU, display
>> controllers, ISP and video accelerators.
>> It contains four planes for progressive video.
>> + * .. _V4L2-PIX-FMT-AJPG:
>> +
>> + - ``V4L2_PIX_FMT_AJPG``
>> + - 'AJPG'
>> + - ASPEED JPEG format used by the aspeed-video driver on Aspeed platforms,
>> + which is generally adapted for remote KVM.
>> + On each frame compression, I will compare the new frame with previous
>> + one to decide which macroblock's data is changed, and only the changed
>> + macroblocks will be compressed.
>> +
>> + The implementation is based on AST2600 A3 datasheet, revision 0.9, which
>> + is not publicly available. Or you can reference Video stream data format
>> + – ASPEED mode compression of SDK_User_Guide which available on
>> + AspeedTech-BMC/openbmc/releases.
>> +
>> + Decoder's implementation can be found here,
>> + `https://github.com/AspeedTech-BMC/aspeed_codec/ <https://github.com/AspeedTech-BMC/aspeed_codec/>`__
> This is better than the previous versions.
>
> Can you still run
>
> $ scripts/checkpatch.pl --strict --max-line-length=80
>
> ?
I will correct the length to meet the rule.
>
> On the decoder --- which values is the user supposed to use for mode_420,
> selector and advance_selector parameters? I think this needs to be
> documented.
I will update following information to aspeed_codec's github, and
provide recommended
values.
"The following parameters should be provided by the encoded stream to
let decoder
know how to work, because Aspeed codec does not include the information
needed
for decoding in the header. Users can adjust the three parameters,
mode420, selector,
and advance_selector, to achieve the desired quality level while at the
same time
reduce the storage size."
>> .. raw:: latex
>>
>> \normalsize
>> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
>> index a1a1b51ac599..c72bc3410bee 100644
>> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
>> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
>> @@ -1497,6 +1497,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
>> case V4L2_PIX_FMT_MT21C: descr = "Mediatek Compressed Format"; break;
>> case V4L2_PIX_FMT_QC08C: descr = "QCOM Compressed 8-bit Format"; break;
>> case V4L2_PIX_FMT_QC10C: descr = "QCOM Compressed 10-bit Format"; break;
>> + case V4L2_PIX_FMT_AJPG: descr = "Aspeed JPEG"; break;
>> default:
>> if (fmt->description[0])
>> return;
>> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
>> index 86cae23cc446..870a7e5ef8ca 100644
>> --- a/include/uapi/linux/videodev2.h
>> +++ b/include/uapi/linux/videodev2.h
>> @@ -775,6 +775,7 @@ struct v4l2_pix_format {
>> #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */
>> #define V4L2_PIX_FMT_QC08C v4l2_fourcc('Q', '0', '8', 'C') /* Qualcomm 8-bit compressed */
>> #define V4L2_PIX_FMT_QC10C v4l2_fourcc('Q', '1', '0', 'C') /* Qualcomm 10-bit compressed */
>> +#define V4L2_PIX_FMT_AJPG v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
>>
>> /* 10bit raw packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
>> #define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
--
Best Regards
Jammy