Although this driver is a good use case for having a directory
that is not other directories and then subdirectories with more
entries, the usage of register_sysctl_table() can recurse and
increases complexity so to avoid that just split out the
registration to each directory with its own entries.
register_sysctl_table() is a deprecated compatibility wrapper.
register_sysctl() can do the directory creation for you so just use
that.
Signed-off-by: Luis Chamberlain <[email protected]>
---
drivers/misc/sgi-xp/xpc_main.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index b2c3c22fc13c..6da509d692bb 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -93,7 +93,7 @@ int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
static int xpc_disengage_min_timelimit; /* = 0 */
static int xpc_disengage_max_timelimit = 120;
-static struct ctl_table xpc_sys_xpc_hb_dir[] = {
+static struct ctl_table xpc_sys_xpc_hb[] = {
{
.procname = "hb_interval",
.data = &xpc_hb_interval,
@@ -112,11 +112,7 @@ static struct ctl_table xpc_sys_xpc_hb_dir[] = {
.extra2 = &xpc_hb_check_max_interval},
{}
};
-static struct ctl_table xpc_sys_xpc_dir[] = {
- {
- .procname = "hb",
- .mode = 0555,
- .child = xpc_sys_xpc_hb_dir},
+static struct ctl_table xpc_sys_xpc[] = {
{
.procname = "disengage_timelimit",
.data = &xpc_disengage_timelimit,
@@ -127,14 +123,9 @@ static struct ctl_table xpc_sys_xpc_dir[] = {
.extra2 = &xpc_disengage_max_timelimit},
{}
};
-static struct ctl_table xpc_sys_dir[] = {
- {
- .procname = "xpc",
- .mode = 0555,
- .child = xpc_sys_xpc_dir},
- {}
-};
+
static struct ctl_table_header *xpc_sysctl;
+static struct ctl_table_header *xpc_sysctl_hb;
/* non-zero if any remote partition disengage was timed out */
int xpc_disengage_timedout;
@@ -1041,6 +1032,8 @@ xpc_do_exit(enum xp_retval reason)
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
+ if (xpc_sysctl_hb)
+ unregister_sysctl_table(xpc_sysctl_hb);
xpc_teardown_partitions();
@@ -1243,7 +1236,8 @@ xpc_init(void)
goto out_1;
}
- xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+ xpc_sysctl = register_sysctl("xpc", xpc_sys_xpc);
+ xpc_sysctl_hb = register_sysctl("xpc/hb", xpc_sys_xpc_hb);
/*
* Fill the partition reserved page with the information needed by
@@ -1308,6 +1302,8 @@ xpc_init(void)
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
out_2:
+ if (xpc_sysctl_hb)
+ unregister_sysctl_table(xpc_sysctl_hb);
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
--
2.39.1
On Thu, Mar 02, 2023 at 12:46:10PM -0800, Luis Chamberlain wrote:
> Although this driver is a good use case for having a directory
> that is not other directories and then subdirectories with more
> entries, the usage of register_sysctl_table() can recurse and
> increases complexity so to avoid that just split out the
> registration to each directory with its own entries.
>
> register_sysctl_table() is a deprecated compatibility wrapper.
> register_sysctl() can do the directory creation for you so just use
> that.
>
> Signed-off-by: Luis Chamberlain <[email protected]>
Reviewed-by: Steve Wahl <[email protected]>
> ---
> drivers/misc/sgi-xp/xpc_main.c | 24 ++++++++++--------------
> 1 file changed, 10 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
> index b2c3c22fc13c..6da509d692bb 100644
> --- a/drivers/misc/sgi-xp/xpc_main.c
> +++ b/drivers/misc/sgi-xp/xpc_main.c
> @@ -93,7 +93,7 @@ int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
> static int xpc_disengage_min_timelimit; /* = 0 */
> static int xpc_disengage_max_timelimit = 120;
>
> -static struct ctl_table xpc_sys_xpc_hb_dir[] = {
> +static struct ctl_table xpc_sys_xpc_hb[] = {
> {
> .procname = "hb_interval",
> .data = &xpc_hb_interval,
> @@ -112,11 +112,7 @@ static struct ctl_table xpc_sys_xpc_hb_dir[] = {
> .extra2 = &xpc_hb_check_max_interval},
> {}
> };
> -static struct ctl_table xpc_sys_xpc_dir[] = {
> - {
> - .procname = "hb",
> - .mode = 0555,
> - .child = xpc_sys_xpc_hb_dir},
> +static struct ctl_table xpc_sys_xpc[] = {
> {
> .procname = "disengage_timelimit",
> .data = &xpc_disengage_timelimit,
> @@ -127,14 +123,9 @@ static struct ctl_table xpc_sys_xpc_dir[] = {
> .extra2 = &xpc_disengage_max_timelimit},
> {}
> };
> -static struct ctl_table xpc_sys_dir[] = {
> - {
> - .procname = "xpc",
> - .mode = 0555,
> - .child = xpc_sys_xpc_dir},
> - {}
> -};
> +
> static struct ctl_table_header *xpc_sysctl;
> +static struct ctl_table_header *xpc_sysctl_hb;
>
> /* non-zero if any remote partition disengage was timed out */
> int xpc_disengage_timedout;
> @@ -1041,6 +1032,8 @@ xpc_do_exit(enum xp_retval reason)
>
> if (xpc_sysctl)
> unregister_sysctl_table(xpc_sysctl);
> + if (xpc_sysctl_hb)
> + unregister_sysctl_table(xpc_sysctl_hb);
>
> xpc_teardown_partitions();
>
> @@ -1243,7 +1236,8 @@ xpc_init(void)
> goto out_1;
> }
>
> - xpc_sysctl = register_sysctl_table(xpc_sys_dir);
> + xpc_sysctl = register_sysctl("xpc", xpc_sys_xpc);
> + xpc_sysctl_hb = register_sysctl("xpc/hb", xpc_sys_xpc_hb);
>
> /*
> * Fill the partition reserved page with the information needed by
> @@ -1308,6 +1302,8 @@ xpc_init(void)
> (void)unregister_die_notifier(&xpc_die_notifier);
> (void)unregister_reboot_notifier(&xpc_reboot_notifier);
> out_2:
> + if (xpc_sysctl_hb)
> + unregister_sysctl_table(xpc_sysctl_hb);
> if (xpc_sysctl)
> unregister_sysctl_table(xpc_sysctl);
>
> --
> 2.39.1
>
--
Steve Wahl, Hewlett Packard Enterprise