This patch series adds the relevant phy and controller
configurations for enabling USB on IPQ9754
Depends on:
https://lore.kernel.org/all/[email protected]/
[v7]:
- com_aux -> cfg_ahb in patch 7
[v6]:
- Incorporated review comments
- Resolve make dtbs_check messages
- Fixed pcs_usb offset
- Board dts file name changed
[v5]:
- Incorporated review comments
- 'make dtbs_check' giving the following messages since
ipq9574 doesn't have power domains. Hope this is ok
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
- Move qmp phy DT node to newer specification
[v4]:
- Incorporated review comments
- Address all 'make dtbs_check' errors
[v3]:
- Incorporated review comments regarding coding style
[v2]:
- Incorporated review comments regarding coding style,
maintaining sorted order of entries and unused phy register
offsets
- Removed NOC clock entries from DT node (will be implemented
later with interconnect support)
- Fixed 'make dtbs_check' errors/warnings
[v1]:
https://lore.kernel.org/linux-arm-msm/[email protected]/T/
Varadarajan Narayanan (8):
dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
dt-bindings: usb: dwc3: Add IPQ9574 compatible
clk: qcom: gcc-ipq9574: Add USB related clocks
phy: qcom-qusb2: add QUSB2 support for IPQ9574
phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
arm64: dts: qcom: ipq9574: Add USB related nodes
arm64: dts: qcom: ipq9574: Enable USB
.../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 +-
.../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 2 +-
.../devicetree/bindings/usb/qcom,dwc3.yaml | 22 +++-
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 16 +++
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 +++++++++++++++++++++
drivers/clk/qcom/gcc-ipq9574.c | 37 +++++++
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +
include/dt-bindings/clock/qcom,ipq9574-gcc.h | 2 +
9 files changed, 317 insertions(+), 3 deletions(-)
--
2.7.4
Add dt-bindings for USB3 PHY found on Qualcomm IPQ9574
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v6:
- Made power-domains optional
Note: In the earlier patch sets, had used the (legacy)
specification available in qcom,msm8996-qmp-usb3-phy.yaml. Moved
to newer specification in qcom,sc8280xp-qmp-usb3-uni-phy.yaml
---
.../devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 16fce10..0c0a548 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -16,6 +16,7 @@ description:
properties:
compatible:
enum:
+ - qcom,ipq9574-qmp-usb3-phy
- qcom,sc8280xp-qmp-usb3-uni-phy
reg:
@@ -60,7 +61,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
--
2.7.4
Document the IPQ9574 dwc3 compatible.
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v6:
- Made power-domains as optional
- Resolved all 'make dtbs_check' messages
Changes in v5:
- Restore removed constraints
Changes in v4:
- Update other relevant sections
- Remove constraints not applicable to IPQ9574
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index d842819..f5dd268 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,6 +17,7 @@ properties:
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
+ - qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
@@ -133,7 +134,6 @@ required:
- "#address-cells"
- "#size-cells"
- ranges
- - power-domains
- clocks
- clock-names
- interrupts
@@ -197,6 +197,26 @@ allOf:
- const: iface
- const: sleep
- const: mock_utmi
+ required:
+ - power-domains
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq9574-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 5
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
- if:
properties:
--
2.7.4
Document the compatible string used for the qusb2 phy in IPQ9574.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v5:
- Undo v4 changes
Changes in v4:
- Remove constraints not applicable to IPQ9574
Changes in v3:
- Maintain the proper sorted order
Changes in v2:
- Moved ipq6018 to the proper place and placed ipq9574
next to it as suggested by Dmitry
---
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 543c1a2..95eecba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,13 +18,14 @@ properties:
oneOf:
- items:
- enum:
+ - qcom,ipq6018-qusb2-phy
- qcom,ipq8074-qusb2-phy
+ - qcom,ipq9574-qusb2-phy
- qcom,msm8953-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- qcom,qcm2290-qusb2-phy
- qcom,sdm660-qusb2-phy
- - qcom,ipq6018-qusb2-phy
- qcom,sm4250-qusb2-phy
- qcom,sm6115-qusb2-phy
- items:
--
2.7.4
Add the phy init sequence for the Super Speed ports found
on IPQ9574.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v2:
- Place the entry such that the list continues to be sorted
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 2ef638b..bec6e40 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -912,6 +912,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
.compatible = "qcom,ipq8074-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
+ .compatible = "qcom,ipq9574-qusb2-phy",
+ .data = &ipq6018_phy_cfg,
+ }, {
.compatible = "qcom,msm8953-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
--
2.7.4
Add the clocks needed for enabling USB in IPQ9574
Reviewed-by: Dmitry Baryshkov <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v2:
- Fixed coding style issues
---
drivers/clk/qcom/gcc-ipq9574.c | 37 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,ipq9574-gcc.h | 2 ++
2 files changed, 39 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index c855954..f19e9cb 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -2041,6 +2041,41 @@ static struct clk_regmap_mux usb0_pipe_clk_src = {
},
};
+static struct clk_branch gcc_usb0_pipe_clk = {
+ .halt_reg = 0x2c054,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2c054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb0_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &usb0_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb0_sleep_clk = {
+ .halt_reg = 0x2c058,
+ .clkr = {
+ .enable_reg = 0x2c058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb0_sleep_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &gcc_sleep_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = {
F(144000, P_XO, 16, 12, 125),
F(400000, P_XO, 12, 1, 5),
@@ -4008,6 +4043,8 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
[GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr,
[USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
[GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr,
+ [GCC_USB0_PIPE_CLK] = &gcc_usb0_pipe_clk.clkr,
+ [GCC_USB0_SLEEP_CLK] = &gcc_usb0_sleep_clk.clkr,
[SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
[SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
diff --git a/include/dt-bindings/clock/qcom,ipq9574-gcc.h b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
index 2d7b460..2cb02f7 100644
--- a/include/dt-bindings/clock/qcom,ipq9574-gcc.h
+++ b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
@@ -214,4 +214,6 @@
#define GCC_PCIE1_PIPE_CLK 205
#define GCC_PCIE2_PIPE_CLK 206
#define GCC_PCIE3_PIPE_CLK 207
+#define GCC_USB0_PIPE_CLK 208
+#define GCC_USB0_SLEEP_CLK 209
#endif
--
2.7.4
Add USB phy and controller related nodes
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v7:
- Change com_aux -> cfg_ahb
Changes in v6:
- Introduce fixed regulators for the phy
- Resolved all 'make dtbs_check' messages
Changes in v5:
- Fix additional comments
- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
- 'make dtbs_check' giving the following messages since
ipq9574 doesn't have power domains. Hope this is ok
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
Changes in v4:
- Use newer bindings without subnodes
- Fix coding style issues
Changes in v3:
- Insert the nodes at proper location
Changes in v2:
- Fixed issues flagged by Krzysztof
- Fix issues reported by make dtbs_check
- Remove NOC related clocks (to be added with proper
interconnect support)
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 43a3dbe..10a8b95 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -150,6 +150,33 @@
method = "smc";
};
+ reg_usb_3p3: s3300 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-vdd-dummy";
+ };
+
+ reg_usb_1p8: s1800 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-pll-dummy";
+ };
+
+ reg_usb_0p925: s0925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb-phy-dummy";
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -179,6 +206,52 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ usb_0_qusbphy: phy@7b000 {
+ compatible = "qcom,ipq9574-qusb2-phy";
+ reg = <0x0007b000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&xo_board_clk>;
+ clock-names = "cfg_ahb",
+ "ref";
+
+ vdd-supply = <®_usb_0p925>;
+ vdda-pll-supply = <®_usb_1p8>;
+ vdda-phy-dpdm-supply = <®_usb_3p3>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
+ };
+
+ usb_0_qmpphy: phy@7d000 {
+ compatible = "qcom,ipq9574-qmp-usb3-phy";
+ reg = <0x0007d000 0xa00>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB0_AUX_CLK>,
+ <&xo_board_clk>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>,
+ <&gcc GCC_USB3PHY_0_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ vdda-pll-supply = <®_usb_1p8>;
+ vdda-phy-supply = <®_usb_0p925>;
+
+ status = "disabled";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb0_pipe_clk";
+ };
+
pcie0_phy: phy@84000 {
compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
reg = <0x00084000 0x1000>;
@@ -548,6 +621,53 @@
status = "disabled";
};
+ usb3: usb@8a00000 {
+ compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SNOC_USB_CLK>,
+ <&gcc GCC_ANOC_USB_AXI_CLK>,
+ <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+ clock-names = "cfg_noc",
+ "iface",
+ "core",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ assigned-clock-rates = <200000000>,
+ <24000000>;
+
+ interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event";
+
+ resets = <&gcc GCC_USB_BCR>;
+ status = "disabled";
+
+ dwc_0: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x8a00000 0xcd00>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ dr_mode = "host";
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
--
2.7.4
Turn on USB related nodes
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v5:
- Move "host" mode specification to board dts
- Due to dependency with earlier patches board dts
filename changed ipq9574-al02-c7.dts -> ipq9574-rdp433.dts
Changes in v2:
- Fix node placement and coding style
- "ok" -> "okay"
---
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 859973b..92ff7ee 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -44,6 +44,10 @@
};
};
+&dwc_0 {
+ dr_mode = "host";
+};
+
&pcie1_phy {
status = "okay";
};
@@ -107,6 +111,14 @@
clock-frequency = <32000>;
};
+&usb_0_qmpphy {
+ status = "okay";
+};
+
+&usb_0_qusbphy {
+ status = "okay";
+};
+
&tlmm {
pcie_1_pin: pcie-1-state {
@@ -173,6 +185,10 @@
};
};
+&usb3 {
+ status = "okay";
+};
+
&xo_board_clk {
clock-frequency = <24000000>;
};
--
2.7.4
Updated USB QMP PHY Init sequence based on HPG for IPQ9574.
Reused clock and reset list from existing targets.
Signed-off-by: Praveenkumar I <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Changes in v6:
- Fix pcs_usb offset
- Use correct clock names array
Changes in v5:
- Fix additional review comments
- Use V3 register offsets
Changes in v4:
- Use qmp_usb_offsets for register space access
Changes in v3:
- Fix hex captitalization
Changes in v2:
- Removed unused phy register offsets
- Moved the clock entries to the correct place
- Maintain sorted order
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index a49711c..11a76a4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
};
+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1558,6 +1640,14 @@ static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
};
+static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
+ .serdes = 0,
+ .pcs = 0x800,
+ .pcs_usb = 0x800,
+ .tx = 0x200,
+ .rx = 0x400,
+};
+
static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
.serdes = 0,
.pcs = 0x0200,
@@ -1586,6 +1676,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
.regs = qmp_v3_usb3phy_regs_layout,
};
+static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
+ .lanes = 1,
+
+ .offsets = &qmp_usb_offsets_ipq9574,
+
+ .serdes_tbl = ipq9574_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+ .tx_tbl = ipq9574_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq9574_usb3_tx_tbl),
+ .rx_tbl = ipq9574_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq9574_usb3_rx_tbl),
+ .pcs_tbl = ipq9574_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = qcm2290_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+};
+
static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
.lanes = 1,
@@ -2589,6 +2701,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
.compatible = "qcom,ipq8074-qmp-usb3-phy",
.data = &ipq8074_usb3phy_cfg,
}, {
+ .compatible = "qcom,ipq9574-qmp-usb3-phy",
+ .data = &ipq9574_usb3phy_cfg,
+ }, {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
}, {
--
2.7.4
On Wed, Apr 05, 2023 at 03:24:04PM +0530, Varadarajan Narayanan wrote:
> Add USB phy and controller related nodes
>
> Signed-off-by: Varadarajan Narayanan <[email protected]>
> ---
> Changes in v7:
> - Change com_aux -> cfg_ahb
> Changes in v6:
> - Introduce fixed regulators for the phy
> - Resolved all 'make dtbs_check' messages
> + usb_0_qmpphy: phy@7d000 {
> + compatible = "qcom,ipq9574-qmp-usb3-phy";
> + reg = <0x0007d000 0xa00>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_AUX_CLK>,
> + <&xo_board_clk>,
> + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_USB0_PIPE_CLK>;
> + clock-names = "aux",
> + "ref",
> + "cfg_ahb",
You still did not update the binding to match this clock. So this is
essentially the third time I'm pointing out the same issue. This is
simply not acceptable.
Just slow down, and don't rush out new revisions of series before
you've had time to review them yourself (and preferably internally at
qualcomm) to make sure that you have addressed all review comments you
have received.
Maintainer and reviewer time is scarce. Our development model really
does not scale unless people take more care.
Johan