Update the msg->len value correctly for SMBUS block read. The discrepancy
went unnoticed as msg->len is used in SMBUS transfers only when a PEC
byte is added.
Fixes: d7583c8a5748 ("i2c: tegra: Add SMBus block read function")
Signed-off-by: Akhil R <[email protected]>
---
drivers/i2c/busses/i2c-tegra.c | 38 +++++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6aab84c8d22b..83e74b8baf67 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -245,6 +245,7 @@ struct tegra_i2c_hw_feature {
* @msg_err: error code for completed message
* @msg_buf: pointer to current message data
* @msg_buf_remaining: size of unsent data in the message buffer
+ * @msg_len: length of message in current transfer
* @msg_read: indicates that the transfer is a read access
* @timings: i2c timings information like bus frequency
* @multimaster_mode: indicates that I2C controller is in multi-master mode
@@ -279,6 +280,7 @@ struct tegra_i2c_dev {
size_t msg_buf_remaining;
int msg_err;
u8 *msg_buf;
+ __u16 msg_len;
struct completion dma_complete;
struct dma_chan *tx_dma_chan;
@@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
else
i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
- packet_header = msg->len - 1;
+ packet_header = i2c_dev->msg_len - 1;
if (i2c_dev->dma_mode && !i2c_dev->msg_read)
*dma_buf++ = packet_header;
@@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
return err;
i2c_dev->msg_buf = msg->buf;
+ i2c_dev->msg_len = msg->len;
- /* The condition true implies smbus block read and len is already read */
- if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
- i2c_dev->msg_buf = msg->buf + 1;
-
- i2c_dev->msg_buf_remaining = msg->len;
i2c_dev->msg_err = I2C_ERR_NONE;
i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
reinit_completion(&i2c_dev->msg_complete);
+ /* *
+ * For SMBUS block read command, read only 1 byte in the first transfer.
+ * Adjust that 1 byte for the next transfer in the msg buffer and msg
+ * length.
+ */
+ if (msg->flags & I2C_M_RECV_LEN) {
+ if (end_state == MSG_END_CONTINUE) {
+ i2c_dev->msg_len = 1;
+ } else {
+ i2c_dev->msg_buf += 1;
+ i2c_dev->msg_len -= 1;
+ }
+ }
+
+ i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
+
if (i2c_dev->msg_read)
- xfer_size = msg->len;
+ xfer_size = i2c_dev->msg_len;
else
- xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
+ xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
@@ -1295,7 +1309,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
if (!i2c_dev->msg_read) {
if (i2c_dev->dma_mode) {
memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
- msg->buf, msg->len);
+ msg->buf, i2c_dev->msg_len);
dma_sync_single_for_device(i2c_dev->dma_dev,
i2c_dev->dma_phys,
@@ -1352,7 +1366,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->dma_phys,
xfer_size, DMA_FROM_DEVICE);
- memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg->len);
+ memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len);
}
}
@@ -1408,8 +1422,8 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
if (ret)
break;
- /* Set the read byte as msg len */
- msgs[i].len = msgs[i].buf[0];
+ /* Set the msg length from first byte */
+ msgs[i].len += msgs[i].buf[0];
dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
}
ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
--
2.17.1
On Fri, Mar 24, 2023 at 05:29:23PM +0530, Akhil R wrote:
> Update the msg->len value correctly for SMBUS block read. The discrepancy
> went unnoticed as msg->len is used in SMBUS transfers only when a PEC
> byte is added.
>
> Fixes: d7583c8a5748 ("i2c: tegra: Add SMBus block read function")
> Signed-off-by: Akhil R <[email protected]>
> ---
> drivers/i2c/busses/i2c-tegra.c | 38 +++++++++++++++++++++++-----------
> 1 file changed, 26 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 6aab84c8d22b..83e74b8baf67 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -245,6 +245,7 @@ struct tegra_i2c_hw_feature {
> * @msg_err: error code for completed message
> * @msg_buf: pointer to current message data
> * @msg_buf_remaining: size of unsent data in the message buffer
> + * @msg_len: length of message in current transfer
> * @msg_read: indicates that the transfer is a read access
> * @timings: i2c timings information like bus frequency
> * @multimaster_mode: indicates that I2C controller is in multi-master mode
> @@ -279,6 +280,7 @@ struct tegra_i2c_dev {
> size_t msg_buf_remaining;
> int msg_err;
> u8 *msg_buf;
> + __u16 msg_len;
>
> struct completion dma_complete;
> struct dma_chan *tx_dma_chan;
> @@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
> else
> i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
>
> - packet_header = msg->len - 1;
> + packet_header = i2c_dev->msg_len - 1;
>
> if (i2c_dev->dma_mode && !i2c_dev->msg_read)
> *dma_buf++ = packet_header;
> @@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> return err;
>
> i2c_dev->msg_buf = msg->buf;
> + i2c_dev->msg_len = msg->len;
>
> - /* The condition true implies smbus block read and len is already read */
> - if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
> - i2c_dev->msg_buf = msg->buf + 1;
> -
> - i2c_dev->msg_buf_remaining = msg->len;
> i2c_dev->msg_err = I2C_ERR_NONE;
> i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
> reinit_completion(&i2c_dev->msg_complete);
>
> + /* *
> + * For SMBUS block read command, read only 1 byte in the first transfer.
> + * Adjust that 1 byte for the next transfer in the msg buffer and msg
> + * length.
> + */
> + if (msg->flags & I2C_M_RECV_LEN) {
> + if (end_state == MSG_END_CONTINUE) {
> + i2c_dev->msg_len = 1;
> + } else {
> + i2c_dev->msg_buf += 1;
> + i2c_dev->msg_len -= 1;
> + }
> + }
> +
> + i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
> +
> if (i2c_dev->msg_read)
> - xfer_size = msg->len;
> + xfer_size = i2c_dev->msg_len;
> else
> - xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
> + xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
>
> xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
>
> @@ -1295,7 +1309,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> if (!i2c_dev->msg_read) {
> if (i2c_dev->dma_mode) {
> memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
> - msg->buf, msg->len);
> + msg->buf, i2c_dev->msg_len);
>
> dma_sync_single_for_device(i2c_dev->dma_dev,
> i2c_dev->dma_phys,
> @@ -1352,7 +1366,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> i2c_dev->dma_phys,
> xfer_size, DMA_FROM_DEVICE);
>
> - memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg->len);
> + memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len);
> }
> }
>
> @@ -1408,8 +1422,8 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
> ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
> if (ret)
> break;
> - /* Set the read byte as msg len */
> - msgs[i].len = msgs[i].buf[0];
> + /* Set the msg length from first byte */
> + msgs[i].len += msgs[i].buf[0];
I'm having trouble understanding why this change is needed. msg->len is
never changed in tegra_i2c_xfer_msg(), as far as I can tell, so it would
contain whatever was in it for the previous transfer. But since we want
to read the message length from the first byte, wouldn't the assignment
(i.e. the old code) be the right way to do that? If we add the length
from the first byte, we could potentially be reading more than whan the
first byte indicated.
What am I missing?
Thierry
> On Fri, Mar 24, 2023 at 05:29:23PM +0530, Akhil R wrote:
> > Update the msg->len value correctly for SMBUS block read. The discrepancy
> > went unnoticed as msg->len is used in SMBUS transfers only when a PEC
> > byte is added.
> >
> > Fixes: d7583c8a5748 ("i2c: tegra: Add SMBus block read function")
> > Signed-off-by: Akhil R <[email protected]>
> > ---
> > drivers/i2c/busses/i2c-tegra.c | 38 +++++++++++++++++++++++-----------
> > 1 file changed, 26 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> > index 6aab84c8d22b..83e74b8baf67 100644
> > --- a/drivers/i2c/busses/i2c-tegra.c
> > +++ b/drivers/i2c/busses/i2c-tegra.c
> > @@ -245,6 +245,7 @@ struct tegra_i2c_hw_feature {
> > * @msg_err: error code for completed message
> > * @msg_buf: pointer to current message data
> > * @msg_buf_remaining: size of unsent data in the message buffer
> > + * @msg_len: length of message in current transfer
> > * @msg_read: indicates that the transfer is a read access
> > * @timings: i2c timings information like bus frequency
> > * @multimaster_mode: indicates that I2C controller is in multi-master
> mode
> > @@ -279,6 +280,7 @@ struct tegra_i2c_dev {
> > size_t msg_buf_remaining;
> > int msg_err;
> > u8 *msg_buf;
> > + __u16 msg_len;
> >
> > struct completion dma_complete;
> > struct dma_chan *tx_dma_chan;
> > @@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct
> tegra_i2c_dev *i2c_dev,
> > else
> > i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
> >
> > - packet_header = msg->len - 1;
> > + packet_header = i2c_dev->msg_len - 1;
> >
> > if (i2c_dev->dma_mode && !i2c_dev->msg_read)
> > *dma_buf++ = packet_header;
> > @@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct
> tegra_i2c_dev *i2c_dev,
> > return err;
> >
> > i2c_dev->msg_buf = msg->buf;
> > + i2c_dev->msg_len = msg->len;
> >
> > - /* The condition true implies smbus block read and len is already
> read */
> > - if (msg->flags & I2C_M_RECV_LEN && end_state !=
> MSG_END_CONTINUE)
> > - i2c_dev->msg_buf = msg->buf + 1;
> > -
> > - i2c_dev->msg_buf_remaining = msg->len;
> > i2c_dev->msg_err = I2C_ERR_NONE;
> > i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
> > reinit_completion(&i2c_dev->msg_complete);
> >
> > + /* *
> > + * For SMBUS block read command, read only 1 byte in the first
> transfer.
> > + * Adjust that 1 byte for the next transfer in the msg buffer and msg
> > + * length.
> > + */
> > + if (msg->flags & I2C_M_RECV_LEN) {
> > + if (end_state == MSG_END_CONTINUE) {
> > + i2c_dev->msg_len = 1;
> > + } else {
> > + i2c_dev->msg_buf += 1;
> > + i2c_dev->msg_len -= 1;
> > + }
> > + }
> > +
> > + i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
> > +
> > if (i2c_dev->msg_read)
> > - xfer_size = msg->len;
> > + xfer_size = i2c_dev->msg_len;
> > else
> > - xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
> > + xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
> >
> > xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
> >
> > @@ -1295,7 +1309,7 @@ static int tegra_i2c_xfer_msg(struct
> tegra_i2c_dev *i2c_dev,
> > if (!i2c_dev->msg_read) {
> > if (i2c_dev->dma_mode) {
> > memcpy(i2c_dev->dma_buf +
> I2C_PACKET_HEADER_SIZE,
> > - msg->buf, msg->len);
> > + msg->buf, i2c_dev->msg_len);
> >
> > dma_sync_single_for_device(i2c_dev->dma_dev,
> > i2c_dev->dma_phys,
> > @@ -1352,7 +1366,7 @@ static int tegra_i2c_xfer_msg(struct
> tegra_i2c_dev *i2c_dev,
> > i2c_dev->dma_phys,
> > xfer_size,
> DMA_FROM_DEVICE);
> >
> > - memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg-
> >len);
> > + memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf,
> i2c_dev->msg_len);
> > }
> > }
> >
> > @@ -1408,8 +1422,8 @@ static int tegra_i2c_xfer(struct i2c_adapter
> *adap, struct i2c_msg msgs[],
> > ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i],
> MSG_END_CONTINUE);
> > if (ret)
> > break;
> > - /* Set the read byte as msg len */
> > - msgs[i].len = msgs[i].buf[0];
> > + /* Set the msg length from first byte */
> > + msgs[i].len += msgs[i].buf[0];
>
> I'm having trouble understanding why this change is needed. msg->len is
> never changed in tegra_i2c_xfer_msg(), as far as I can tell, so it would
> contain whatever was in it for the previous transfer. But since we want
> to read the message length from the first byte, wouldn't the assignment
> (i.e. the old code) be the right way to do that? If we add the length
> from the first byte, we could potentially be reading more than whan the
> first byte indicated.
>
> What am I missing?
>
The value in the first byte will contain only the number of bytes to read further.
The value excludes the first byte as well as the PEC byte.
The function i2c_smbus_xfer_emulated(), in file i2c-core-smbus.c, increments
msg->len based on 'wants_pec'. Other functions, specifically the function
i2c_smbus_check_pec() expects msg->len to be the number of bytes of data +
first length byte + PEC byte.
To avoid reading more bytes, I added another parameter ' i2c_dev->msg_len'
which will contain the exact number of bytes to read in the current xfer_msg().
Regards,
Akhil
On Wed, Apr 05, 2023 at 04:11:31PM +0000, Akhil R wrote:
> > On Fri, Mar 24, 2023 at 05:29:23PM +0530, Akhil R wrote:
> > > Update the msg->len value correctly for SMBUS block read. The discrepancy
> > > went unnoticed as msg->len is used in SMBUS transfers only when a PEC
> > > byte is added.
> > >
> > > Fixes: d7583c8a5748 ("i2c: tegra: Add SMBus block read function")
> > > Signed-off-by: Akhil R <[email protected]>
> > > ---
> > > drivers/i2c/busses/i2c-tegra.c | 38 +++++++++++++++++++++++-----------
> > > 1 file changed, 26 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> > > index 6aab84c8d22b..83e74b8baf67 100644
> > > --- a/drivers/i2c/busses/i2c-tegra.c
> > > +++ b/drivers/i2c/busses/i2c-tegra.c
> > > @@ -245,6 +245,7 @@ struct tegra_i2c_hw_feature {
> > > * @msg_err: error code for completed message
> > > * @msg_buf: pointer to current message data
> > > * @msg_buf_remaining: size of unsent data in the message buffer
> > > + * @msg_len: length of message in current transfer
> > > * @msg_read: indicates that the transfer is a read access
> > > * @timings: i2c timings information like bus frequency
> > > * @multimaster_mode: indicates that I2C controller is in multi-master
> > mode
> > > @@ -279,6 +280,7 @@ struct tegra_i2c_dev {
> > > size_t msg_buf_remaining;
> > > int msg_err;
> > > u8 *msg_buf;
> > > + __u16 msg_len;
> > >
> > > struct completion dma_complete;
> > > struct dma_chan *tx_dma_chan;
> > > @@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct
> > tegra_i2c_dev *i2c_dev,
> > > else
> > > i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
> > >
> > > - packet_header = msg->len - 1;
> > > + packet_header = i2c_dev->msg_len - 1;
> > >
> > > if (i2c_dev->dma_mode && !i2c_dev->msg_read)
> > > *dma_buf++ = packet_header;
> > > @@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct
> > tegra_i2c_dev *i2c_dev,
> > > return err;
> > >
> > > i2c_dev->msg_buf = msg->buf;
> > > + i2c_dev->msg_len = msg->len;
> > >
> > > - /* The condition true implies smbus block read and len is already
> > read */
> > > - if (msg->flags & I2C_M_RECV_LEN && end_state !=
> > MSG_END_CONTINUE)
> > > - i2c_dev->msg_buf = msg->buf + 1;
> > > -
> > > - i2c_dev->msg_buf_remaining = msg->len;
> > > i2c_dev->msg_err = I2C_ERR_NONE;
> > > i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
> > > reinit_completion(&i2c_dev->msg_complete);
> > >
> > > + /* *
> > > + * For SMBUS block read command, read only 1 byte in the first
> > transfer.
> > > + * Adjust that 1 byte for the next transfer in the msg buffer and msg
> > > + * length.
> > > + */
> > > + if (msg->flags & I2C_M_RECV_LEN) {
> > > + if (end_state == MSG_END_CONTINUE) {
> > > + i2c_dev->msg_len = 1;
> > > + } else {
> > > + i2c_dev->msg_buf += 1;
> > > + i2c_dev->msg_len -= 1;
> > > + }
> > > + }
> > > +
> > > + i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
> > > +
> > > if (i2c_dev->msg_read)
> > > - xfer_size = msg->len;
> > > + xfer_size = i2c_dev->msg_len;
> > > else
> > > - xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
> > > + xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
> > >
> > > xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
> > >
> > > @@ -1295,7 +1309,7 @@ static int tegra_i2c_xfer_msg(struct
> > tegra_i2c_dev *i2c_dev,
> > > if (!i2c_dev->msg_read) {
> > > if (i2c_dev->dma_mode) {
> > > memcpy(i2c_dev->dma_buf +
> > I2C_PACKET_HEADER_SIZE,
> > > - msg->buf, msg->len);
> > > + msg->buf, i2c_dev->msg_len);
> > >
> > > dma_sync_single_for_device(i2c_dev->dma_dev,
> > > i2c_dev->dma_phys,
> > > @@ -1352,7 +1366,7 @@ static int tegra_i2c_xfer_msg(struct
> > tegra_i2c_dev *i2c_dev,
> > > i2c_dev->dma_phys,
> > > xfer_size,
> > DMA_FROM_DEVICE);
> > >
> > > - memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg-
> > >len);
> > > + memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf,
> > i2c_dev->msg_len);
> > > }
> > > }
> > >
> > > @@ -1408,8 +1422,8 @@ static int tegra_i2c_xfer(struct i2c_adapter
> > *adap, struct i2c_msg msgs[],
> > > ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i],
> > MSG_END_CONTINUE);
> > > if (ret)
> > > break;
> > > - /* Set the read byte as msg len */
> > > - msgs[i].len = msgs[i].buf[0];
> > > + /* Set the msg length from first byte */
> > > + msgs[i].len += msgs[i].buf[0];
> >
> > I'm having trouble understanding why this change is needed. msg->len is
> > never changed in tegra_i2c_xfer_msg(), as far as I can tell, so it would
> > contain whatever was in it for the previous transfer. But since we want
> > to read the message length from the first byte, wouldn't the assignment
> > (i.e. the old code) be the right way to do that? If we add the length
> > from the first byte, we could potentially be reading more than whan the
> > first byte indicated.
> >
> > What am I missing?
> >
> The value in the first byte will contain only the number of bytes to read further.
> The value excludes the first byte as well as the PEC byte.
> The function i2c_smbus_xfer_emulated(), in file i2c-core-smbus.c, increments
> msg->len based on 'wants_pec'. Other functions, specifically the function
> i2c_smbus_check_pec() expects msg->len to be the number of bytes of data +
> first length byte + PEC byte.
>
> To avoid reading more bytes, I added another parameter ' i2c_dev->msg_len'
> which will contain the exact number of bytes to read in the current xfer_msg().
Okay, sounds good:
Acked-by: Thierry Reding <[email protected]>
On 3/24/23 14:59, Akhil R wrote:
...
> @@ -279,6 +280,7 @@ struct tegra_i2c_dev {
> size_t msg_buf_remaining;
> int msg_err;
> u8 *msg_buf;
> + __u16 msg_len;
__u16 is for UAPI headers, please use unsigned int. Also keep variables
sorted by string length.
> struct completion dma_complete;
> struct dma_chan *tx_dma_chan;
> @@ -1169,7 +1171,7 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
> else
> i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
>
> - packet_header = msg->len - 1;
> + packet_header = i2c_dev->msg_len - 1;
>
> if (i2c_dev->dma_mode && !i2c_dev->msg_read)
> *dma_buf++ = packet_header;
> @@ -1242,20 +1244,32 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> return err;
>
> i2c_dev->msg_buf = msg->buf;
> + i2c_dev->msg_len = msg->len;
>
> - /* The condition true implies smbus block read and len is already read */
> - if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
> - i2c_dev->msg_buf = msg->buf + 1;
> -
> - i2c_dev->msg_buf_remaining = msg->len;
> i2c_dev->msg_err = I2C_ERR_NONE;
> i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
> reinit_completion(&i2c_dev->msg_complete);
>
> + /* *
Please correct the comment style
> + * For SMBUS block read command, read only 1 byte in the first transfer.
> + * Adjust that 1 byte for the next transfer in the msg buffer and msg
> + * length.
> + */
--
Best regards,
Dmitry