2023-05-31 10:23:05

by Stephan Gerhold

[permalink] [raw]
Subject: [PATCH] remoteproc: qcom: Use of_reserved_mem_lookup()

Reserved memory can be either looked up using the generic function
of_address_to_resource() or using the special of_reserved_mem_lookup().
The latter has the advantage that it ensures that the referenced memory
region was really reserved and is not e.g. status = "disabled".

of_reserved_mem also supports allocating reserved memory dynamically at
boot time. This works only when using of_reserved_mem_lookup() since
there won't be a fixed address in the device tree.

Switch the code to use of_reserved_mem_lookup(), similar to
qcom_q6v5_wcss.c which is using it already. There is no functional
difference for static reserved memory allocations.

While at it this also adds two missing of_node_put() calls in
qcom_q6v5_pas.c.

Signed-off-by: Stephan Gerhold <[email protected]>
---
See e.g. [1] for an example of dynamically allocated reserved memory.
(This patch does *not* depend on [1] and is useful without as well...)

NOTE: Changes in qcom_q6v5_adsp.c and qcom_q6v5_pas.c are untested,
I only checked qcom_q6v5_mss.c and qcom_wcnss.c on MSM8916/DB410c.
The code changes are pretty similar for all of those though.

[1]: https://lore.kernel.org/linux-arm-msm/[email protected]/
---
drivers/remoteproc/qcom_q6v5_adsp.c | 22 ++++++++--------
drivers/remoteproc/qcom_q6v5_mss.c | 35 +++++++++++++++----------
drivers/remoteproc/qcom_q6v5_pas.c | 51 ++++++++++++++++++++-----------------
drivers/remoteproc/qcom_wcnss.c | 24 ++++++++---------
4 files changed, 69 insertions(+), 63 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 6777a3bd6226..948b3d00a564 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -14,8 +14,8 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -637,28 +637,26 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,

static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem = NULL;
struct device_node *node;
- struct resource r;
- int ret;

node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+
if (!node) {
- dev_err(adsp->dev, "no memory-region specified\n");
+ dev_err(adsp->dev, "unable to resolve memory-region\n");
return -EINVAL;
}

- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
- if (ret)
- return ret;
-
- adsp->mem_phys = adsp->mem_reloc = r.start;
- adsp->mem_size = resource_size(&r);
+ adsp->mem_phys = adsp->mem_reloc = rmem->base;
+ adsp->mem_size = rmem->size;
adsp->mem_region = devm_ioremap_wc(adsp->dev,
adsp->mem_phys, adsp->mem_size);
if (!adsp->mem_region) {
dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, adsp->mem_size);
+ &rmem->base, adsp->mem_size);
return -EBUSY;
}

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 70bffc9f33f6..af815f3cb2d1 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
@@ -1872,11 +1871,9 @@ static int q6v5_init_reset(struct q6v5 *qproc)

static int q6v5_alloc_memory_region(struct q6v5 *qproc)
{
- struct device_node *child;
struct reserved_mem *rmem;
+ struct device_node *child;
struct device_node *node;
- struct resource r;
- int ret;

/*
* In the absence of mba/mpss sub-child, extract the mba and mpss
@@ -1891,15 +1888,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
of_node_put(child);
}

- ret = of_address_to_resource(node, 0, &r);
+ if (!node) {
+ dev_err(qproc->dev, "no mba memory-region specified\n");
+ return -EINVAL;
+ }
+
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret) {
+ if (!rmem) {
dev_err(qproc->dev, "unable to resolve mba region\n");
- return ret;
+ return -EINVAL;
}

- qproc->mba_phys = r.start;
- qproc->mba_size = resource_size(&r);
+ qproc->mba_phys = rmem->base;
+ qproc->mba_size = rmem->size;

if (!child) {
node = of_parse_phandle(qproc->dev->of_node,
@@ -1910,15 +1912,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
of_node_put(child);
}

- ret = of_address_to_resource(node, 0, &r);
+ if (!node) {
+ dev_err(qproc->dev, "no mpss memory-region specified\n");
+ return -EINVAL;
+ }
+
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret) {
+ if (!rmem) {
dev_err(qproc->dev, "unable to resolve mpss region\n");
- return ret;
+ return -EINVAL;
}

- qproc->mpss_phys = qproc->mpss_reloc = r.start;
- qproc->mpss_size = resource_size(&r);
+ qproc->mpss_phys = qproc->mpss_reloc = rmem->base;
+ qproc->mpss_size = rmem->size;

if (!child) {
node = of_parse_phandle(qproc->dev->of_node, "memory-region", 2);
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index ca0155f41dac..82f498fa9237 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -13,8 +13,8 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -533,9 +533,8 @@ static void adsp_pds_detach(struct qcom_adsp *adsp, struct device **pds,

static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem;
struct device_node *node;
- struct resource r;
- int ret;

node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
if (!node) {
@@ -543,17 +542,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return -EINVAL;
}

- ret = of_address_to_resource(node, 0, &r);
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret)
- return ret;
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve memory-region\n");
+ return -EINVAL;
+ }

- adsp->mem_phys = adsp->mem_reloc = r.start;
- adsp->mem_size = resource_size(&r);
+ adsp->mem_phys = adsp->mem_reloc = rmem->base;
+ adsp->mem_size = rmem->size;
adsp->mem_region = devm_ioremap_wc(adsp->dev, adsp->mem_phys, adsp->mem_size);
if (!adsp->mem_region) {
dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, adsp->mem_size);
+ &rmem->base, adsp->mem_size);
return -EBUSY;
}

@@ -566,16 +567,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return -EINVAL;
}

- ret = of_address_to_resource(node, 0, &r);
- if (ret)
- return ret;
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve dtb memory-region\n");
+ return -EINVAL;
+ }

- adsp->dtb_mem_phys = adsp->dtb_mem_reloc = r.start;
- adsp->dtb_mem_size = resource_size(&r);
+ adsp->dtb_mem_phys = adsp->dtb_mem_reloc = rmem->base;
+ adsp->dtb_mem_size = rmem->size;
adsp->dtb_mem_region = devm_ioremap_wc(adsp->dev, adsp->dtb_mem_phys, adsp->dtb_mem_size);
if (!adsp->dtb_mem_region) {
dev_err(adsp->dev, "unable to map dtb memory region: %pa+%zx\n",
- &r.start, adsp->dtb_mem_size);
+ &rmem->base, adsp->dtb_mem_size);
return -EBUSY;
}

@@ -584,29 +588,28 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)

static int adsp_assign_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem = NULL;
struct qcom_scm_vmperm perm;
struct device_node *node;
- struct resource r;
int ret;

if (!adsp->region_assign_idx)
return 0;

node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
- if (!node) {
- dev_err(adsp->dev, "missing shareable memory-region\n");
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve shareable memory-region\n");
return -EINVAL;
}

- ret = of_address_to_resource(node, 0, &r);
- if (ret)
- return ret;
-
perm.vmid = QCOM_SCM_VMID_MSS_MSA;
perm.perm = QCOM_SCM_PERM_RW;

- adsp->region_assign_phys = r.start;
- adsp->region_assign_size = resource_size(&r);
+ adsp->region_assign_phys = rmem->base;
+ adsp->region_assign_size = rmem->size;
adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);

ret = qcom_scm_assign_mem(adsp->region_assign_phys,
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 1ed0647bc962..334a9c75dad6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -14,8 +14,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -506,27 +506,25 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,

static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
{
+ struct reserved_mem *rmem = NULL;
struct device_node *node;
- struct resource r;
- int ret;

node = of_parse_phandle(wcnss->dev->of_node, "memory-region", 0);
- if (!node) {
- dev_err(wcnss->dev, "no memory-region specified\n");
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+
+ if (!rmem) {
+ dev_err(wcnss->dev, "unable to resolve memory-region\n");
return -EINVAL;
}

- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
- if (ret)
- return ret;
-
- wcnss->mem_phys = wcnss->mem_reloc = r.start;
- wcnss->mem_size = resource_size(&r);
+ wcnss->mem_phys = wcnss->mem_reloc = rmem->base;
+ wcnss->mem_size = rmem->size;
wcnss->mem_region = devm_ioremap_wc(wcnss->dev, wcnss->mem_phys, wcnss->mem_size);
if (!wcnss->mem_region) {
dev_err(wcnss->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, wcnss->mem_size);
+ &rmem->base, wcnss->mem_size);
return -EBUSY;
}


---
base-commit: 1ca04f21b204e99dd704146231adfb79ea2fb366
change-id: 20230529-rproc-of-rmem-7d931f61f64e

Best regards,
--
Stephan Gerhold <[email protected]>



2023-06-14 15:15:59

by Stephan Gerhold

[permalink] [raw]
Subject: Re: [PATCH] remoteproc: qcom: Use of_reserved_mem_lookup()

On Wed, Jun 14, 2023 at 08:12:13AM -0700, Bjorn Andersson wrote:
> On Wed, May 31, 2023 at 11:34:54AM +0200, Stephan Gerhold wrote:
> > Reserved memory can be either looked up using the generic function
> > of_address_to_resource() or using the special of_reserved_mem_lookup().
> > The latter has the advantage that it ensures that the referenced memory
> > region was really reserved and is not e.g. status = "disabled".
> >
> > of_reserved_mem also supports allocating reserved memory dynamically at
> > boot time. This works only when using of_reserved_mem_lookup() since
> > there won't be a fixed address in the device tree.
> >
> > Switch the code to use of_reserved_mem_lookup(), similar to
> > qcom_q6v5_wcss.c which is using it already. There is no functional
> > difference for static reserved memory allocations.
> >
> > While at it this also adds two missing of_node_put() calls in
> > qcom_q6v5_pas.c.
> >
> > Signed-off-by: Stephan Gerhold <[email protected]>
> > ---
> > See e.g. [1] for an example of dynamically allocated reserved memory.
> > (This patch does *not* depend on [1] and is useful without as well...)
> >
> > NOTE: Changes in qcom_q6v5_adsp.c and qcom_q6v5_pas.c are untested,
> > I only checked qcom_q6v5_mss.c and qcom_wcnss.c on MSM8916/DB410c.
> > The code changes are pretty similar for all of those though.
> >
> > [1]: https://lore.kernel.org/linux-arm-msm/[email protected]/
> > ---
> > drivers/remoteproc/qcom_q6v5_adsp.c | 22 ++++++++--------
> > drivers/remoteproc/qcom_q6v5_mss.c | 35 +++++++++++++++----------
> > drivers/remoteproc/qcom_q6v5_pas.c | 51 ++++++++++++++++++++-----------------
> > drivers/remoteproc/qcom_wcnss.c | 24 ++++++++---------
> > 4 files changed, 69 insertions(+), 63 deletions(-)
> >
> > diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> > index 6777a3bd6226..948b3d00a564 100644
> > --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> > +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> > @@ -14,8 +14,8 @@
> > #include <linux/kernel.h>
> > #include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > -#include <linux/of_address.h>
> > #include <linux/of_device.h>
> > +#include <linux/of_reserved_mem.h>
> > #include <linux/platform_device.h>
> > #include <linux/pm_domain.h>
> > #include <linux/pm_runtime.h>
> > @@ -637,28 +637,26 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,
> >
> > static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
> > {
> > + struct reserved_mem *rmem = NULL;
> > struct device_node *node;
> > - struct resource r;
> > - int ret;
> >
> > node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
> > + if (node)
> > + rmem = of_reserved_mem_lookup(node);
> > + of_node_put(node);
> > +
> > if (!node) {
> > - dev_err(adsp->dev, "no memory-region specified\n");
> > + dev_err(adsp->dev, "unable to resolve memory-region\n");
> > return -EINVAL;
> > }
> >
> > - ret = of_address_to_resource(node, 0, &r);
> > - of_node_put(node);
> > - if (ret)
> > - return ret;
> > -
> > - adsp->mem_phys = adsp->mem_reloc = r.start;
> > - adsp->mem_size = resource_size(&r);
>
> Aren't you missing a check for !rmem here? (The others has it)
>

Indeed, thanks for spotting this! Will send a v2.

Stephan

2023-06-14 15:35:03

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH] remoteproc: qcom: Use of_reserved_mem_lookup()

On Wed, May 31, 2023 at 11:34:54AM +0200, Stephan Gerhold wrote:
> Reserved memory can be either looked up using the generic function
> of_address_to_resource() or using the special of_reserved_mem_lookup().
> The latter has the advantage that it ensures that the referenced memory
> region was really reserved and is not e.g. status = "disabled".
>
> of_reserved_mem also supports allocating reserved memory dynamically at
> boot time. This works only when using of_reserved_mem_lookup() since
> there won't be a fixed address in the device tree.
>
> Switch the code to use of_reserved_mem_lookup(), similar to
> qcom_q6v5_wcss.c which is using it already. There is no functional
> difference for static reserved memory allocations.
>
> While at it this also adds two missing of_node_put() calls in
> qcom_q6v5_pas.c.
>
> Signed-off-by: Stephan Gerhold <[email protected]>
> ---
> See e.g. [1] for an example of dynamically allocated reserved memory.
> (This patch does *not* depend on [1] and is useful without as well...)
>
> NOTE: Changes in qcom_q6v5_adsp.c and qcom_q6v5_pas.c are untested,
> I only checked qcom_q6v5_mss.c and qcom_wcnss.c on MSM8916/DB410c.
> The code changes are pretty similar for all of those though.
>
> [1]: https://lore.kernel.org/linux-arm-msm/[email protected]/
> ---
> drivers/remoteproc/qcom_q6v5_adsp.c | 22 ++++++++--------
> drivers/remoteproc/qcom_q6v5_mss.c | 35 +++++++++++++++----------
> drivers/remoteproc/qcom_q6v5_pas.c | 51 ++++++++++++++++++++-----------------
> drivers/remoteproc/qcom_wcnss.c | 24 ++++++++---------
> 4 files changed, 69 insertions(+), 63 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 6777a3bd6226..948b3d00a564 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -14,8 +14,8 @@
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> -#include <linux/of_address.h>
> #include <linux/of_device.h>
> +#include <linux/of_reserved_mem.h>
> #include <linux/platform_device.h>
> #include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
> @@ -637,28 +637,26 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,
>
> static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
> {
> + struct reserved_mem *rmem = NULL;
> struct device_node *node;
> - struct resource r;
> - int ret;
>
> node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
> + if (node)
> + rmem = of_reserved_mem_lookup(node);
> + of_node_put(node);
> +
> if (!node) {
> - dev_err(adsp->dev, "no memory-region specified\n");
> + dev_err(adsp->dev, "unable to resolve memory-region\n");
> return -EINVAL;
> }
>
> - ret = of_address_to_resource(node, 0, &r);
> - of_node_put(node);
> - if (ret)
> - return ret;
> -
> - adsp->mem_phys = adsp->mem_reloc = r.start;
> - adsp->mem_size = resource_size(&r);

Aren't you missing a check for !rmem here? (The others has it)

Regards,
Bjorn