2023-08-20 16:31:06

by Wolfram Sang

[permalink] [raw]
Subject: [PULL REQUEST] i2c-for-6.5-rc7

The following changes since commit 2ccdd1b13c591d306f0401d98dedc4bdcd02b421:

Linux 6.5-rc6 (2023-08-13 11:29:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.5-rc7

for you to fetch changes up to 4caf4cb1eaed469742ef719f2cc024b1ec3fa9e6:

i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue (2023-08-14 18:17:13 +0200)

----------------------------------------------------------------
Usual set of driver fixes. A bit more than usual because I was
unavailable for a while.

----------------------------------------------------------------
Carlos Song (1):
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

Chengfeng Ye (1):
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue

Dan Carpenter (1):
i2c: sun6i-p2wi: Fix an error message in probe()

Parker Newman (1):
i2c: tegra: Fix i2c-tegra DMA config option processing

Quan Nguyen (1):
i2c: designware: Correct length byte validation logic

Tam Nguyen (1):
i2c: designware: Handle invalid SMBus block data response length value

Thierry Reding (1):
i2c: tegra: Fix failure during probe deferral cleanup

Uwe Kleine-König (1):
i2c: Update documentation to use .probe() again

Yicong Yang (1):
i2c: hisi: Only handle the interrupt of the driver's transfer


with much appreciated quality assurance from
----------------------------------------------------------------
Akhil R (1):
(Test) i2c: tegra: Fix failure during probe deferral cleanup

Andi Shyti (8):
(Rev.) i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
(Rev.) i2c: Update documentation to use .probe() again
(Rev.) i2c: sun6i-p2wi: Fix an error message in probe()
(Rev.) i2c: hisi: Only handle the interrupt of the driver's transfer
(Rev.) i2c: tegra: Fix failure during probe deferral cleanup
(Rev.) i2c: designware: Handle invalid SMBus block data response length value
(Rev.) i2c: designware: Correct length byte validation logic
(Rev.) i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

Javier Martinez Canillas (1):
(Rev.) i2c: Update documentation to use .probe() again

Jean Delvare (1):
(Rev.) i2c: Update documentation to use .probe() again

Documentation/i2c/writing-clients.rst | 2 +-
drivers/i2c/busses/i2c-bcm-iproc.c | 11 +++++++----
drivers/i2c/busses/i2c-designware-master.c | 16 ++++++++++++++--
drivers/i2c/busses/i2c-hisi.c | 8 ++++++++
drivers/i2c/busses/i2c-imx-lpi2c.c | 3 +++
drivers/i2c/busses/i2c-sun6i-p2wi.c | 3 ++-
drivers/i2c/busses/i2c-tegra.c | 3 ++-
7 files changed, 37 insertions(+), 9 deletions(-)


Attachments:
(No filename) (2.77 kB)
signature.asc (849.00 B)
Download all attachments