This series adds support for onsemi's NCN26010 10BASE-T1S Ethernet controller. This is
a combined MAC/PHY that uses SPI to interface to a microcontroller.
The patches include devicetree bindings for the NCN26000 PHY and the
NCN26010, required changes to the NCN26000 PHY driver and the NCN26010
driver itself.
Jay Monkman (4):
dt-bindings: net: Add bindings for onsemi NCN26000 PHY
dt-bindings: net: Add onsemi NCN26010 ethernet controller
net: phy: Add GPIO and DT support to NCN26000
net/onsemi: Add NCN26010 driver
.../devicetree/bindings/net/onnn,macphy.yaml | 94 +
.../bindings/net/onnn,ncn26000.yaml | 177 ++
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/onsemi/Kconfig | 27 +
drivers/net/ethernet/onsemi/Makefile | 9 +
drivers/net/ethernet/onsemi/onsemi_macphy.h | 298 +++
.../net/ethernet/onsemi/onsemi_macphy_core.c | 2149 +++++++++++++++++
.../ethernet/onsemi/onsemi_macphy_ethtool.c | 179 ++
drivers/net/phy/ncn26000.c | 467 +++-
10 files changed, 3394 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/onnn,macphy.yaml
create mode 100644 Documentation/devicetree/bindings/net/onnn,ncn26000.yaml
create mode 100644 drivers/net/ethernet/onsemi/Kconfig
create mode 100644 drivers/net/ethernet/onsemi/Makefile
create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy.h
create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy_core.c
create mode 100644 drivers/net/ethernet/onsemi/onsemi_macphy_ethtool.c
--
2.40.1