Renames various function names and variable names that were previously
in camelcase to snakecase to ensure consistent naming styles.This issues
were highlighted by checkpatch.
Dorcas AnonoLitunya (5):
Staging: sm750fb: Rename displayControlAdjust_SM750E
Staging: sm750fb: Rename pModeParam
Staging: sm750fb: Rename displayControl
Staging: sm750fb: Rename programModeRegisters
Staging: sm750fb: Rename ddk750_setModeTiming
drivers/staging/sm750fb/ddk750_mode.c | 90 +++++++++++++--------------
drivers/staging/sm750fb/ddk750_mode.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 2 +-
3 files changed, 47 insertions(+), 47 deletions(-)
--
2.42.0.345.gaab89be2eb
Rename function displayControlAdjust_SM750E to
display_control_adjust_SM750E.This follows snakecase naming convention
and ensures consistent naming style throughout the file.Issue by
checkpatch.
Mutes the following error:
CHECK:Avoid CamelCase: <displayControlAdjust_SM750E>
Signed-off-by: Dorcas AnonoLitunya <[email protected]>
---
drivers/staging/sm750fb/ddk750_mode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index e00a6cb31947..8708995f676c 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,8 +14,8 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
- unsigned long dispControl)
+display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
+ unsigned long dispControl)
{
unsigned long x, y;
@@ -125,7 +125,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- displayControlAdjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_SM750LE(pModeParam, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
--
2.42.0.345.gaab89be2eb
Rename variable pModeParam to mode_param.This follows snakecase naming
convention and ensures consistent naming style throughout the file.Issue
by checkpatch.
Mutes the following checkpatch error:
CHECK: Avoid CamelCase: <pModeParam>
Signed-off-by: Dorcas AnonoLitunya <[email protected]>
---
drivers/staging/sm750fb/ddk750_mode.c | 52 +++++++++++++--------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 8708995f676c..431b273a347a 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
+display_control_adjust_SM750LE(struct mode_parameter *mode_param,
unsigned long dispControl)
{
unsigned long x, y;
- x = pModeParam->horizontal_display_end;
- y = pModeParam->vertical_display_end;
+ x = mode_param->horizontal_display_end;
+ y = mode_param->vertical_display_end;
/*
* SM750LE has to set up the top-left and bottom-right
@@ -75,7 +75,7 @@ display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
+static int programModeRegisters(struct mode_parameter *mode_param,
struct pll_value *pll)
{
int ret = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- tmp = ((pModeParam->horizontal_total - 1) <<
+ tmp = ((mode_param->horizontal_total - 1) <<
CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->horizontal_display_end - 1) &
+ tmp |= (mode_param->horizontal_display_end - 1) &
CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_HORIZONTAL_TOTAL, tmp);
- tmp = (pModeParam->horizontal_sync_width <<
+ tmp = (mode_param->horizontal_sync_width <<
CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
CRT_HORIZONTAL_SYNC_WIDTH_MASK;
- tmp |= (pModeParam->horizontal_sync_start - 1) &
+ tmp |= (mode_param->horizontal_sync_start - 1) &
CRT_HORIZONTAL_SYNC_START_MASK;
poke32(CRT_HORIZONTAL_SYNC, tmp);
- tmp = ((pModeParam->vertical_total - 1) <<
+ tmp = ((mode_param->vertical_total - 1) <<
CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
CRT_VERTICAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->vertical_display_end - 1) &
+ tmp |= (mode_param->vertical_display_end - 1) &
CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_VERTICAL_TOTAL, tmp);
- tmp = ((pModeParam->vertical_sync_height <<
+ tmp = ((mode_param->vertical_sync_height <<
CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
CRT_VERTICAL_SYNC_HEIGHT_MASK;
- tmp |= (pModeParam->vertical_sync_start - 1) &
+ tmp |= (mode_param->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK;
poke32(CRT_VERTICAL_SYNC, tmp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- display_control_adjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_SM750LE(mode_param, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
- reg = ((pModeParam->horizontal_total - 1) <<
+ reg = ((mode_param->horizontal_total - 1) <<
PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
- reg |= ((pModeParam->horizontal_display_end - 1) &
+ reg |= ((mode_param->horizontal_display_end - 1) &
PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
poke32(PANEL_HORIZONTAL_TOTAL, reg);
poke32(PANEL_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
+ ((mode_param->horizontal_sync_width <<
PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
+ ((mode_param->horizontal_sync_start - 1) &
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
+ (((mode_param->vertical_total - 1) <<
PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
+ ((mode_param->vertical_display_end - 1) &
PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
+ ((mode_param->vertical_sync_height <<
PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
+ ((mode_param->vertical_sync_start - 1) &
PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
- if (pModeParam->clock_phase_polarity)
+ if (mode_param->clock_phase_polarity)
tmp |= DISPLAY_CTRL_CLOCK_PHASE;
reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
--
2.42.0.345.gaab89be2eb
Rename variable displayControl to display_control. This follows
snakecase naming convention and ensures consistent naming style
throughout the file.Issue by checkpatch.
Mutes the following checkpatch error:
CHECK: Avoid CamelCase: <dispControl>
Signed-off-by: Dorcas AnonoLitunya <[email protected]>
---
drivers/staging/sm750fb/ddk750_mode.c | 32 +++++++++++++--------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 431b273a347a..fc3db09de9ae 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -15,7 +15,7 @@
*/
static unsigned long
display_control_adjust_SM750LE(struct mode_parameter *mode_param,
- unsigned long dispControl)
+ unsigned long disp_control)
{
unsigned long x, y;
@@ -36,42 +36,42 @@ display_control_adjust_SM750LE(struct mode_parameter *mode_param,
((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
/*
- * Assume common fields in dispControl have been properly set before
+ * Assume common fields in disp_control have been properly set before
* calling this function.
- * This function only sets the extra fields in dispControl.
+ * This function only sets the extra fields in disp_control.
*/
/* Clear bit 29:27 of display control register */
- dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
+ disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resolutions. */
if (x == 800 && y == 600)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
else if (x == 1024 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
else if (x == 1152 && y == 864)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 720)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
else if (x == 1280 && y == 960)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else if (x == 1280 && y == 1024)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else /* default to VGA clock */
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
/* Set bit 25:24 of display controller */
- dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
+ disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
/* Set bit 14 of display controller */
- dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
+ disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
- poke32(CRT_DISPLAY_CTRL, dispControl);
+ poke32(CRT_DISPLAY_CTRL, disp_control);
- return dispControl;
+ return disp_control;
}
/* only timing related registers will be programed */
--
2.42.0.345.gaab89be2eb
Rename function programModeRegisters to program_mode_registers. This
follows snakecase naming convention and ensures consistent naming style
throughout the file.Issue by checkpatch.
Mutes the following checkpatch error:
CHECK: Avoid CamelCase: <programModeRegisters>
Signed-off-by: Dorcas AnonoLitunya <[email protected]>
---
drivers/staging/sm750fb/ddk750_mode.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index fc3db09de9ae..e901855fa9b6 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -75,8 +75,8 @@ display_control_adjust_SM750LE(struct mode_parameter *mode_param,
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *mode_param,
- struct pll_value *pll)
+static int program_mode_registers(struct mode_parameter *mode_param,
+ struct pll_value *pll)
{
int ret = 0;
int cnt = 0;
@@ -220,6 +220,6 @@ int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
}
- programModeRegisters(parm, &pll);
+ program_mode_registers(parm, &pll);
return 0;
}
--
2.42.0.345.gaab89be2eb
Rename function ddk750_setModeTiming to ddk750_set_mode_timing.This
patch affects three files as the function is imported to other external
files.
Renaming the function ensures snakecase naming convention is followed
thus enabling consistent naming style throughout.Issue by checkpatch.
Mutes the following checkpatch error:
CHECK:Avoid CamelCase: <ddk750_setModeTiming>
Signed-off-by: Dorcas AnonoLitunya <[email protected]>
---
drivers/staging/sm750fb/ddk750_mode.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index e901855fa9b6..f3f354831617 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -207,7 +207,7 @@ static int program_mode_registers(struct mode_parameter *mode_param,
return ret;
}
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock)
{
struct pll_value pll;
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 2df78a0937b2..1b70885f85e5 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -33,5 +33,5 @@ struct mode_parameter {
enum spolarity clock_phase_polarity;
};
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock);
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock);
#endif
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 71247eaf26ee..4bc89218c11c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -305,7 +305,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
- ret = ddk750_setModeTiming(&modparm, clock);
+ ret = ddk750_set_mode_timing(&modparm, clock);
if (ret) {
pr_err("Set mode timing failed\n");
goto exit;
--
2.42.0.345.gaab89be2eb
On Sun, 15 Oct 2023, Dorcas AnonoLitunya wrote:
> Rename function displayControlAdjust_SM750E to
> display_control_adjust_SM750E.This follows snakecase naming convention
> and ensures consistent naming style throughout the file.Issue by
> checkpatch.
The period at the end of a sentence should have a space after it.
ensures -> ensures a
Issue -> Issue found
julia
>
> Mutes the following error:
> CHECK:Avoid CamelCase: <displayControlAdjust_SM750E>
>
> Signed-off-by: Dorcas AnonoLitunya <[email protected]>
> ---
> drivers/staging/sm750fb/ddk750_mode.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> index e00a6cb31947..8708995f676c 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -14,8 +14,8 @@
> * in bit 29:27 of Display Control register.
> */
> static unsigned long
> -displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
> - unsigned long dispControl)
> +display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
> + unsigned long dispControl)
> {
> unsigned long x, y;
>
> @@ -125,7 +125,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
> tmp |= DISPLAY_CTRL_HSYNC_PHASE;
>
> if (sm750_get_chip_type() == SM750LE) {
> - displayControlAdjust_SM750LE(pModeParam, tmp);
> + display_control_adjust_SM750LE(pModeParam, tmp);
> } else {
> reg = peek32(CRT_DISPLAY_CTRL) &
> ~(DISPLAY_CTRL_VSYNC_PHASE |
> --
> 2.42.0.345.gaab89be2eb
>
>
>
On Sun, 15 Oct 2023, Dorcas AnonoLitunya wrote:
> Rename variable displayControl to display_control. This follows
> snakecase naming convention and ensures consistent naming style
> throughout the file.Issue by checkpatch.
Actually, the variable seems to be dispControl?
julia
>
> Mutes the following checkpatch error:
> CHECK: Avoid CamelCase: <dispControl>
>
> Signed-off-by: Dorcas AnonoLitunya <[email protected]>
> ---
> drivers/staging/sm750fb/ddk750_mode.c | 32 +++++++++++++--------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> index 431b273a347a..fc3db09de9ae 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -15,7 +15,7 @@
> */
> static unsigned long
> display_control_adjust_SM750LE(struct mode_parameter *mode_param,
> - unsigned long dispControl)
> + unsigned long disp_control)
> {
> unsigned long x, y;
>
> @@ -36,42 +36,42 @@ display_control_adjust_SM750LE(struct mode_parameter *mode_param,
> ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
>
> /*
> - * Assume common fields in dispControl have been properly set before
> + * Assume common fields in disp_control have been properly set before
> * calling this function.
> - * This function only sets the extra fields in dispControl.
> + * This function only sets the extra fields in disp_control.
> */
>
> /* Clear bit 29:27 of display control register */
> - dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
> + disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
>
> /* Set bit 29:27 of display control register for the right clock */
> /* Note that SM750LE only need to supported 7 resolutions. */
> if (x == 800 && y == 600)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
> else if (x == 1024 && y == 768)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
> else if (x == 1152 && y == 864)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
> else if (x == 1280 && y == 768)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
> else if (x == 1280 && y == 720)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
> else if (x == 1280 && y == 960)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
> else if (x == 1280 && y == 1024)
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
> else /* default to VGA clock */
> - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
> + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
>
> /* Set bit 25:24 of display controller */
> - dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
> + disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
>
> /* Set bit 14 of display controller */
> - dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
> + disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
>
> - poke32(CRT_DISPLAY_CTRL, dispControl);
> + poke32(CRT_DISPLAY_CTRL, disp_control);
>
> - return dispControl;
> + return disp_control;
> }
>
> /* only timing related registers will be programed */
> --
> 2.42.0.345.gaab89be2eb
>
>
>
On Sun, Oct 15, 2023 at 10:22:29PM +0200, Julia Lawall wrote:
>
>
> On Sun, 15 Oct 2023, Dorcas AnonoLitunya wrote:
>
> > Rename function displayControlAdjust_SM750E to
> > display_control_adjust_SM750E.This follows snakecase naming convention
> > and ensures consistent naming style throughout the file.Issue by
> > checkpatch.
>
> The period at the end of a sentence should have a space after it.
>
> ensures -> ensures a
>
> Issue -> Issue found
>
This is corrected. Thanks Julia!
> julia
>
> >
> > Mutes the following error:
> > CHECK:Avoid CamelCase: <displayControlAdjust_SM750E>
> >
> > Signed-off-by: Dorcas AnonoLitunya <[email protected]>
> > ---
> > drivers/staging/sm750fb/ddk750_mode.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> > index e00a6cb31947..8708995f676c 100644
> > --- a/drivers/staging/sm750fb/ddk750_mode.c
> > +++ b/drivers/staging/sm750fb/ddk750_mode.c
> > @@ -14,8 +14,8 @@
> > * in bit 29:27 of Display Control register.
> > */
> > static unsigned long
> > -displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
> > - unsigned long dispControl)
> > +display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
> > + unsigned long dispControl)
> > {
> > unsigned long x, y;
> >
> > @@ -125,7 +125,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
> > tmp |= DISPLAY_CTRL_HSYNC_PHASE;
> >
> > if (sm750_get_chip_type() == SM750LE) {
> > - displayControlAdjust_SM750LE(pModeParam, tmp);
> > + display_control_adjust_SM750LE(pModeParam, tmp);
> > } else {
> > reg = peek32(CRT_DISPLAY_CTRL) &
> > ~(DISPLAY_CTRL_VSYNC_PHASE |
> > --
> > 2.42.0.345.gaab89be2eb
> >
> >
> >
On Sun, Oct 15, 2023 at 10:23:54PM +0200, Julia Lawall wrote:
>
>
> On Sun, 15 Oct 2023, Dorcas AnonoLitunya wrote:
>
> > Rename variable displayControl to display_control. This follows
> > snakecase naming convention and ensures consistent naming style
> > throughout the file.Issue by checkpatch.
>
> Actually, the variable seems to be dispControl?
>
I had actually missed this. Thanks for the correction. Its now corrected
in v2.
Dorcas
> julia
>
> >
> > Mutes the following checkpatch error:
> > CHECK: Avoid CamelCase: <dispControl>
> >
> > Signed-off-by: Dorcas AnonoLitunya <[email protected]>
> > ---
> > drivers/staging/sm750fb/ddk750_mode.c | 32 +++++++++++++--------------
> > 1 file changed, 16 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> > index 431b273a347a..fc3db09de9ae 100644
> > --- a/drivers/staging/sm750fb/ddk750_mode.c
> > +++ b/drivers/staging/sm750fb/ddk750_mode.c
> > @@ -15,7 +15,7 @@
> > */
> > static unsigned long
> > display_control_adjust_SM750LE(struct mode_parameter *mode_param,
> > - unsigned long dispControl)
> > + unsigned long disp_control)
> > {
> > unsigned long x, y;
> >
> > @@ -36,42 +36,42 @@ display_control_adjust_SM750LE(struct mode_parameter *mode_param,
> > ((x - 1) & CRT_AUTO_CENTERING_BR_RIGHT_MASK));
> >
> > /*
> > - * Assume common fields in dispControl have been properly set before
> > + * Assume common fields in disp_control have been properly set before
> > * calling this function.
> > - * This function only sets the extra fields in dispControl.
> > + * This function only sets the extra fields in disp_control.
> > */
> >
> > /* Clear bit 29:27 of display control register */
> > - dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
> > + disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
> >
> > /* Set bit 29:27 of display control register for the right clock */
> > /* Note that SM750LE only need to supported 7 resolutions. */
> > if (x == 800 && y == 600)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
> > else if (x == 1024 && y == 768)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
> > else if (x == 1152 && y == 864)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
> > else if (x == 1280 && y == 768)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
> > else if (x == 1280 && y == 720)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
> > else if (x == 1280 && y == 960)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
> > else if (x == 1280 && y == 1024)
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
> > else /* default to VGA clock */
> > - dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
> > + disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
> >
> > /* Set bit 25:24 of display controller */
> > - dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
> > + disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
> >
> > /* Set bit 14 of display controller */
> > - dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
> > + disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
> >
> > - poke32(CRT_DISPLAY_CTRL, dispControl);
> > + poke32(CRT_DISPLAY_CTRL, disp_control);
> >
> > - return dispControl;
> > + return disp_control;
> > }
> >
> > /* only timing related registers will be programed */
> > --
> > 2.42.0.345.gaab89be2eb
> >
> >
> >