Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git tags/input-for-v6.8-rc0
to receive updates for the input subsystem. You will get:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes.
Changelog:
---------
Andreas Kemnade (4):
Input: omap4-keypad - react on keypresses if device is runtime-suspended
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: touchscreen: neonode,zforce: Use standard properties
Input: zforce_ts - accept standard touchscreen properties
Anshul Dalal (4):
dt-bindings: input: gpio-mouse: Convert to json-schema
dt-bindings: input: convert drv266x to json-schema
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: driver for Adafruit Seesaw Gamepad
Biju Das (3):
Input: da9063 - simplify obtaining OF match data
Input: da9063 - drop redundant prints in probe()
Input: da9063 - use dev_err_probe()
Christophe JAILLET (1):
Input: xpad - remove usage of the deprecated ida_simple_xx() API
Dmitry Torokhov (2):
Input: da9063_onkey - avoid using OF-specific APIs
Input: da9063_onkey - avoid explicitly setting input's parent
Hans de Goede (1):
Input: atkbd - use ab83 as id when skipping the getid command
Hermes Zhang (1):
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Jeff LaBundy (4):
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for OTP variants
Jiri Valek - 2N (3):
Input: cap11xx - remove unnecessary IRQ parsing
dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings
Input: cap11xx - add advanced sensitivity settings
Krzysztof Kozlowski (1):
dt-bindings: input: samsung,s6sy761: convert to DT schema
Linus Walleij (4):
Input: navpoint - convert to use GPIO descriptor
Input: tca6416-keypad - drop unused include
Input: omap-keypad - drop optional GPIO support
Input: as5011 - convert to GPIO descriptor
Marcus Folkesson (1):
Input: pxrc - simplify mutex handling with guard macro
Marek Szyprowski (1):
Input: max77693-haptic - add device-tree compatible strings
Mark Brown (3):
Input: cap11xx - cache hardware ID registers
Input: cap11xx - convert to use maple tree register cache
Input: qt1050 - convert to use maple tree register cache
Rob Herring (2):
dt-bindings: input: sprd,sc27xx-vibrator: Drop incomplete example
dt-bindings: input: mediatek,pmic-keys: Drop incomplete example
Tony Lindgren (2):
dt-bindings: input: gpio-keys: Allow optional dedicated wakeirq
Input: gpio-keys - add system suspend support for dedicated wakeirqs
ye xingchen (7):
Input: use sysfs_emit() instead of scnprintf()
Input: mouse - use sysfs_emit[_at]() instead of scnprintf()
Input: touchscreen - use sysfs_emit[_at]() instead of?scnprintf()
Input: synaptics-rmi4 - use sysfs_emit() to instead of scnprintf()
Input: ims-pcu - use sysfs_emit() instead of scnprintf()
Input: iqs269a - use sysfs_emit() instead of scnprintf()
Input: vivaldi - convert to use sysfs_emit_at() API
Diffstat:
--------
.../bindings/input/adafruit,seesaw-gamepad.yaml | 63 ++++
.../devicetree/bindings/input/gpio-keys.yaml | 41 ++-
.../devicetree/bindings/input/gpio-mouse.txt | 32 --
.../devicetree/bindings/input/gpio-mouse.yaml | 68 +++++
.../devicetree/bindings/input/iqs269a.yaml | 98 +++++-
.../bindings/input/mediatek,pmic-keys.yaml | 24 +-
.../bindings/input/microchip,cap11xx.yaml | 80 ++++-
.../bindings/input/sprd,sc27xx-vibrator.yaml | 19 +-
.../devicetree/bindings/input/ti,drv2665.txt | 17 --
.../devicetree/bindings/input/ti,drv2667.txt | 17 --
.../devicetree/bindings/input/ti,drv266x.yaml | 50 +++
.../bindings/input/touchscreen/neonode,zforce.yaml | 72 +++++
.../bindings/input/touchscreen/samsung,s6sy761.txt | 32 --
.../input/touchscreen/samsung,s6sy761.yaml | 54 ++++
.../bindings/input/touchscreen/zforce_ts.txt | 34 ---
MAINTAINERS | 7 +
drivers/input/input.c | 8 +-
drivers/input/joystick/Kconfig | 10 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/adafruit-seesaw.c | 315 +++++++++++++++++++
drivers/input/joystick/as5011.c | 24 +-
drivers/input/joystick/pxrc.c | 42 ++-
drivers/input/joystick/xpad.c | 6 +-
drivers/input/keyboard/atkbd.c | 12 +-
drivers/input/keyboard/cap11xx.c | 253 ++++++++++++----
drivers/input/keyboard/gpio_keys.c | 75 ++++-
drivers/input/keyboard/omap-keypad.c | 19 +-
drivers/input/keyboard/omap4-keypad.c | 15 +-
drivers/input/keyboard/qt1050.c | 2 +-
drivers/input/keyboard/tca6416-keypad.c | 1 -
drivers/input/misc/da9063_onkey.c | 69 ++---
drivers/input/misc/ims-pcu.c | 10 +-
drivers/input/misc/iqs269a.c | 335 ++++++++++++++++++---
drivers/input/misc/max77693-haptic.c | 14 +-
drivers/input/mouse/cyapa.c | 22 +-
drivers/input/mouse/cyapa_gen3.c | 2 +-
drivers/input/mouse/cyapa_gen5.c | 4 +-
drivers/input/mouse/cyapa_gen6.c | 20 +-
drivers/input/mouse/elan_i2c_core.c | 18 +-
drivers/input/mouse/navpoint.c | 41 +--
drivers/input/rmi4/rmi_f01.c | 13 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 21 +-
drivers/input/touchscreen/edt-ft5x06.c | 2 +-
drivers/input/touchscreen/hideep.c | 6 +-
drivers/input/touchscreen/hycon-hy46xx.c | 2 +-
drivers/input/touchscreen/ilitek_ts_i2c.c | 16 +-
drivers/input/touchscreen/iqs5xx.c | 12 +-
drivers/input/touchscreen/iqs7211.c | 12 +-
drivers/input/touchscreen/melfas_mip4.c | 16 +-
drivers/input/touchscreen/usbtouchscreen.c | 4 +-
drivers/input/touchscreen/wdt87xx_i2c.c | 6 +-
drivers/input/touchscreen/zforce_ts.c | 34 +--
drivers/input/vivaldi-fmap.c | 6 +-
include/linux/gpio_keys.h | 2 +
include/linux/input/as5011.h | 1 -
include/linux/input/navpoint.h | 1 -
include/linux/platform_data/keypad-omap.h | 3 -
57 files changed, 1633 insertions(+), 550 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
delete mode 100644 Documentation/devicetree/bindings/input/gpio-mouse.txt
create mode 100644 Documentation/devicetree/bindings/input/gpio-mouse.yaml
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2665.txt
delete mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
create mode 100644 Documentation/devicetree/bindings/input/ti,drv266x.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
create mode 100644 drivers/input/joystick/adafruit-seesaw.c
Thanks.
--
Dmitry
The pull request you sent on Thu, 18 Jan 2024 10:16:17 -0800:
> git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git tags/input-for-v6.8-rc0
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/0f289bdd4102fc870c8b97652c57d41952040d70
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html