On 04-02-24, 07:59, Andrea della Porta wrote:
> From: Maxime Ripard <[email protected]>
>
> The BCM2712 has a DMA-Lite controller that is basically a BCM2835-style
> DMA controller that supports 40 bits DMA addresses.
>
> We need it for HDMI audio to work.
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Dom Cobley <[email protected]>
> Signed-off-by: Andrea della Porta <[email protected]>
> ---
> drivers/dma/bcm2835-dma.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
> index 548cf7343d83..055c558caa0e 100644
> --- a/drivers/dma/bcm2835-dma.c
> +++ b/drivers/dma/bcm2835-dma.c
> @@ -100,6 +100,7 @@ struct bcm2835_chan {
>
> bool is_lite_channel;
> bool is_40bit_channel;
> + bool is_2712;
why not use is_40bit_channel..? also this can be applicable for more
soc, make it generic flag if you cant reuse this one
> };
>
> struct bcm2835_desc {
> @@ -545,7 +546,11 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
> control_block->info = info;
> control_block->src = src;
> control_block->dst = dst;
> - control_block->stride = 0;
> + if (c->is_2712)
> + control_block->stride = (upper_32_bits(dst) << 8) |
> + upper_32_bits(src);
> + else
> + control_block->stride = 0;
> control_block->next = 0;
> }
>
> @@ -570,7 +575,8 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
> d->cb_list[frame - 1].cb)->next_cb =
> to_bcm2711_cbaddr(cb_entry->paddr);
> if (frame && !c->is_40bit_channel)
> - d->cb_list[frame - 1].cb->next = cb_entry->paddr;
> + d->cb_list[frame - 1].cb->next = c->is_2712 ?
> + to_bcm2711_cbaddr(cb_entry->paddr) : cb_entry->paddr;
>
> /* update src and dst and length */
> if (src && (info & BCM2835_DMA_S_INC)) {
> @@ -750,7 +756,10 @@ static void bcm2835_dma_start_desc(struct bcm2835_chan *c)
> writel(BCM2711_DMA40_ACTIVE | BCM2711_DMA40_PROT | BCM2711_DMA40_CS_FLAGS(c->dreq),
> c->chan_base + BCM2711_DMA40_CS);
> } else {
> - writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
> + writel(BIT(31), c->chan_base + BCM2835_DMA_CS);
> +
> + writel(c->is_2712 ? to_bcm2711_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr,
> + c->chan_base + BCM2835_DMA_ADDR);
> writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
> c->chan_base + BCM2835_DMA_CS);
> }
> @@ -1119,7 +1128,8 @@ static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
> d->cb_list[frames - 1].cb)->next_cb =
> to_bcm2711_cbaddr(d->cb_list[0].paddr);
> else
> - d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr;
> + d->cb_list[d->frames - 1].cb->next = c->is_2712 ?
> + to_bcm2711_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr;
>
> return vchan_tx_prep(&c->vc, &d->vd, flags);
> }
> @@ -1186,6 +1196,8 @@ static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id,
> else if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
> BCM2835_DMA_DEBUG_LITE)
> c->is_lite_channel = true;
> + if (d->cfg_data->dma_mask == DMA_BIT_MASK(40))
> + c->is_2712 = true;
>
> return 0;
> }
> --
> 2.41.0
--
~Vinod