Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
reclaim") we passed the number of pages for the reclaim request directly
to try_to_free_mem_cgroup_pages, which could lead to significant
overreclaim. After 0388536ac291 the number of pages was limited to a
maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
However such a small batch size caused a regression in reclaim
performance due to many more reclaim start/stop cycles inside
memory_reclaim.
Reclaim tries to balance nr_to_reclaim fidelity with fairness across
nodes and cgroups over which the pages are spread. As such, the bigger
the request, the bigger the absolute overreclaim error. Historic
in-kernel users of reclaim have used fixed, small sized requests to
approach an appropriate reclaim rate over time. When we reclaim a user
request of arbitrary size, use decaying batch sizes to manage error while
maintaining reasonable throughput.
root - full reclaim pages/sec time (sec)
pre-0388536ac291 : 68047 10.46
post-0388536ac291 : 13742 inf
(reclaim-reclaimed)/4 : 67352 10.51
/uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
pre-0388536ac291 : 258822 1.12 107.8
post-0388536ac291 : 105174 2.49 3.5
(reclaim-reclaimed)/4 : 233396 1.12 -7.4
/uid_0 - full reclaim pages/sec time (sec)
pre-0388536ac291 : 72334 7.09
post-0388536ac291 : 38105 14.45
(reclaim-reclaimed)/4 : 72914 6.96
Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
Signed-off-by: T.J. Mercier <[email protected]>
Reviewed-by: Yosry Ahmed <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
---
v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
changes.
v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
mm/memcontrol.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 46d8d02114cf..f6ab61128869 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
if (!nr_retries)
lru_add_drain_all();
+ /* Will converge on zero, but reclaim enforces a minimum */
+ unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
+
reclaimed = try_to_free_mem_cgroup_pages(memcg,
- min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
- GFP_KERNEL, reclaim_options);
+ batch_size, GFP_KERNEL, reclaim_options);
if (!reclaimed && !nr_retries--)
return -EAGAIN;
--
2.43.0.594.gd9cf4e227d-goog
On Fri, Feb 2, 2024 at 3:39 PM T.J. Mercier <[email protected]> wrote:
>
> Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> reclaim") we passed the number of pages for the reclaim request directly
> to try_to_free_mem_cgroup_pages, which could lead to significant
> overreclaim. After 0388536ac291 the number of pages was limited to a
> maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> However such a small batch size caused a regression in reclaim
> performance due to many more reclaim start/stop cycles inside
> memory_reclaim.
>
> Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> nodes and cgroups over which the pages are spread. As such, the bigger
> the request, the bigger the absolute overreclaim error. Historic
> in-kernel users of reclaim have used fixed, small sized requests to
> approach an appropriate reclaim rate over time. When we reclaim a user
> request of arbitrary size, use decaying batch sizes to manage error while
> maintaining reasonable throughput.
>
> root - full reclaim pages/sec time (sec)
> pre-0388536ac291 : 68047 10.46
> post-0388536ac291 : 13742 inf
> (reclaim-reclaimed)/4 : 67352 10.51
>
> /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> pre-0388536ac291 : 258822 1.12 107.8
> post-0388536ac291 : 105174 2.49 3.5
> (reclaim-reclaimed)/4 : 233396 1.12 -7.4
>
> /uid_0 - full reclaim pages/sec time (sec)
> pre-0388536ac291 : 72334 7.09
> post-0388536ac291 : 38105 14.45
> (reclaim-reclaimed)/4 : 72914 6.96
>
> Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> Signed-off-by: T.J. Mercier <[email protected]>
> Reviewed-by: Yosry Ahmed <[email protected]>
> Acked-by: Johannes Weiner <[email protected]>
>
Acked-by: Shakeel Butt <[email protected]>
On Fri, Feb 02, 2024 at 11:38:54PM +0000, "T.J. Mercier" <[email protected]> wrote:
> mm/memcontrol.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
Reviewed-by: Michal Koutn? <[email protected]>
Thanks!
On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> reclaim") we passed the number of pages for the reclaim request directly
> to try_to_free_mem_cgroup_pages, which could lead to significant
> overreclaim. After 0388536ac291 the number of pages was limited to a
> maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> However such a small batch size caused a regression in reclaim
> performance due to many more reclaim start/stop cycles inside
> memory_reclaim.
You have mentioned that in one of the previous emails but it is good to
mention what is the source of that overhead for the future reference.
> Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> nodes and cgroups over which the pages are spread. As such, the bigger
> the request, the bigger the absolute overreclaim error. Historic
> in-kernel users of reclaim have used fixed, small sized requests to
> approach an appropriate reclaim rate over time. When we reclaim a user
> request of arbitrary size, use decaying batch sizes to manage error while
> maintaining reasonable throughput.
These numbers are with MGLRU or the default reclaim implementation?
> root - full reclaim pages/sec time (sec)
> pre-0388536ac291 : 68047 10.46
> post-0388536ac291 : 13742 inf
> (reclaim-reclaimed)/4 : 67352 10.51
>
> /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> pre-0388536ac291 : 258822 1.12 107.8
> post-0388536ac291 : 105174 2.49 3.5
> (reclaim-reclaimed)/4 : 233396 1.12 -7.4
>
> /uid_0 - full reclaim pages/sec time (sec)
> pre-0388536ac291 : 72334 7.09
> post-0388536ac291 : 38105 14.45
> (reclaim-reclaimed)/4 : 72914 6.96
>
> Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> Signed-off-by: T.J. Mercier <[email protected]>
> Reviewed-by: Yosry Ahmed <[email protected]>
> Acked-by: Johannes Weiner <[email protected]>
>
> ---
> v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> changes.
> v2: Simplify the request size calculation per Johannes Weiner and Michal Koutn?
>
> mm/memcontrol.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 46d8d02114cf..f6ab61128869 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> if (!nr_retries)
> lru_add_drain_all();
>
> + /* Will converge on zero, but reclaim enforces a minimum */
> + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
This doesn't fit into the existing coding style. I do not think there is
a strong reason to go against it here.
> +
> reclaimed = try_to_free_mem_cgroup_pages(memcg,
> - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> - GFP_KERNEL, reclaim_options);
> + batch_size, GFP_KERNEL, reclaim_options);
Also with the increased reclaim target do we need something like this?
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4f9c854ce6cc..94794cf5ee9f 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
- return SWAP_CLUSTER_MAX;
+ return sc->nr_to_reclaim;
}
lru_add_drain();
>
> if (!reclaimed && !nr_retries--)
> return -EAGAIN;
> --
> 2.43.0.594.gd9cf4e227d-goog
--
Michal Hocko
SUSE Labs
On Mon, Feb 5, 2024 at 2:40 AM Michal Hocko <[email protected]> wrote:
>
> On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> > Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> > reclaim") we passed the number of pages for the reclaim request directly
> > to try_to_free_mem_cgroup_pages, which could lead to significant
> > overreclaim. After 0388536ac291 the number of pages was limited to a
> > maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> > However such a small batch size caused a regression in reclaim
> > performance due to many more reclaim start/stop cycles inside
> > memory_reclaim.
>
> You have mentioned that in one of the previous emails but it is good to
> mention what is the source of that overhead for the future reference.
I can add a sentence about the restart cost being amortized over more
pages with a large batch size. It covers things like repeatedly
flushing stats, walking the tree, evaluating protection limits, etc.
> > Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> > nodes and cgroups over which the pages are spread. As such, the bigger
> > the request, the bigger the absolute overreclaim error. Historic
> > in-kernel users of reclaim have used fixed, small sized requests to
> > approach an appropriate reclaim rate over time. When we reclaim a user
> > request of arbitrary size, use decaying batch sizes to manage error while
> > maintaining reasonable throughput.
>
> These numbers are with MGLRU or the default reclaim implementation?
These numbers are for both. root uses the memcg LRU (MGLRU was
enabled), and /uid_0 does not.
> > root - full reclaim pages/sec time (sec)
> > pre-0388536ac291 : 68047 10.46
> > post-0388536ac291 : 13742 inf
> > (reclaim-reclaimed)/4 : 67352 10.51
> >
> > /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> > pre-0388536ac291 : 258822 1.12 107.8
> > post-0388536ac291 : 105174 2.49 3.5
> > (reclaim-reclaimed)/4 : 233396 1.12 -7.4
> >
> > /uid_0 - full reclaim pages/sec time (sec)
> > pre-0388536ac291 : 72334 7.09
> > post-0388536ac291 : 38105 14.45
> > (reclaim-reclaimed)/4 : 72914 6.96
> >
> > Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> > Signed-off-by: T.J. Mercier <[email protected]>
> > Reviewed-by: Yosry Ahmed <[email protected]>
> > Acked-by: Johannes Weiner <[email protected]>
> >
> > ---
> > v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> > changes.
> > v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
> >
> > mm/memcontrol.c | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > index 46d8d02114cf..f6ab61128869 100644
> > --- a/mm/memcontrol.c
> > +++ b/mm/memcontrol.c
> > @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > if (!nr_retries)
> > lru_add_drain_all();
> >
> > + /* Will converge on zero, but reclaim enforces a minimum */
> > + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
>
> This doesn't fit into the existing coding style. I do not think there is
> a strong reason to go against it here.
There's been some back and forth here. You'd prefer to move this to
the top of the while loop, under the declaration of reclaimed? It's
farther from its use there, but it does match the existing style in
the file better.
> > +
> > reclaimed = try_to_free_mem_cgroup_pages(memcg,
> > - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> > - GFP_KERNEL, reclaim_options);
> > + batch_size, GFP_KERNEL, reclaim_options);
>
> Also with the increased reclaim target do we need something like this?
>
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 4f9c854ce6cc..94794cf5ee9f 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
>
> /* We are about to die and free our memory. Return now. */
> if (fatal_signal_pending(current))
> - return SWAP_CLUSTER_MAX;
> + return sc->nr_to_reclaim;
> }
>
> lru_add_drain();
> >
> > if (!reclaimed && !nr_retries--)
> > return -EAGAIN;
> > --
This is interesting, but I don't think it's closely related to this
change. This section looks like it was added to delay OOM kills due to
apparent lack of reclaim progress when pages are isolated and the
direct reclaimer is scheduled out. A couple things:
In the context of proactive reclaim, current is not really undergoing
reclaim due to memory pressure. It's initiated from userspace. So
whether it has a fatal signal pending or not doesn't seem like it
should influence the return value of shrink_inactive_list for some
probably unrelated process. It seems more straightforward to me to
return 0, and add another fatal signal pending check to the caller
(shrink_lruvec) to bail out early (dealing with OOM kill avoidance
there if necessary) instead of waiting to accumulate fake
SWAP_CLUSTER_MAX values from shrink_inactive_list.
As far as changing the value, SWAP_CLUSTER_MAX puts the final value of
sc->nr_reclaimed pretty close to sc->nr_to_reclaim. Since there's a
loop for each evictable lru in shrink_lruvec, we could end up with 4 *
sc->nr_to_reclaim in sc->nr_reclaimed if we switched to
sc->nr_to_reclaim from SWAP_CLUSTER_MAX... an even bigger lie. So I
don't think we'd want to do that.
On Mon 05-02-24 11:29:49, T.J. Mercier wrote:
> On Mon, Feb 5, 2024 at 2:40 AM Michal Hocko <[email protected]> wrote:
> >
> > On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> > > Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> > > reclaim") we passed the number of pages for the reclaim request directly
> > > to try_to_free_mem_cgroup_pages, which could lead to significant
> > > overreclaim. After 0388536ac291 the number of pages was limited to a
> > > maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> > > However such a small batch size caused a regression in reclaim
> > > performance due to many more reclaim start/stop cycles inside
> > > memory_reclaim.
> >
> > You have mentioned that in one of the previous emails but it is good to
> > mention what is the source of that overhead for the future reference.
>
> I can add a sentence about the restart cost being amortized over more
> pages with a large batch size. It covers things like repeatedly
> flushing stats, walking the tree, evaluating protection limits, etc.
>
> > > Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> > > nodes and cgroups over which the pages are spread. As such, the bigger
> > > the request, the bigger the absolute overreclaim error. Historic
> > > in-kernel users of reclaim have used fixed, small sized requests to
> > > approach an appropriate reclaim rate over time. When we reclaim a user
> > > request of arbitrary size, use decaying batch sizes to manage error while
> > > maintaining reasonable throughput.
> >
> > These numbers are with MGLRU or the default reclaim implementation?
>
> These numbers are for both. root uses the memcg LRU (MGLRU was
> enabled), and /uid_0 does not.
Thanks it would be nice to outline that in the changelog.
> > > root - full reclaim pages/sec time (sec)
> > > pre-0388536ac291 : 68047 10.46
> > > post-0388536ac291 : 13742 inf
> > > (reclaim-reclaimed)/4 : 67352 10.51
> > >
> > > /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> > > pre-0388536ac291 : 258822 1.12 107.8
> > > post-0388536ac291 : 105174 2.49 3.5
> > > (reclaim-reclaimed)/4 : 233396 1.12 -7.4
> > >
> > > /uid_0 - full reclaim pages/sec time (sec)
> > > pre-0388536ac291 : 72334 7.09
> > > post-0388536ac291 : 38105 14.45
> > > (reclaim-reclaimed)/4 : 72914 6.96
> > >
> > > Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> > > Signed-off-by: T.J. Mercier <[email protected]>
> > > Reviewed-by: Yosry Ahmed <[email protected]>
> > > Acked-by: Johannes Weiner <[email protected]>
> > >
> > > ---
> > > v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> > > changes.
> > > v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
> > >
> > > mm/memcontrol.c | 6 ++++--
> > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > > index 46d8d02114cf..f6ab61128869 100644
> > > --- a/mm/memcontrol.c
> > > +++ b/mm/memcontrol.c
> > > @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > > if (!nr_retries)
> > > lru_add_drain_all();
> > >
> > > + /* Will converge on zero, but reclaim enforces a minimum */
> > > + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
> >
> > This doesn't fit into the existing coding style. I do not think there is
> > a strong reason to go against it here.
>
> There's been some back and forth here. You'd prefer to move this to
> the top of the while loop, under the declaration of reclaimed? It's
> farther from its use there, but it does match the existing style in
> the file better.
This is not something I deeply care about but generally it is better to
not mix styles unless that is a clear win. If you want to save one LOC
you can just move it up - just couple of lines up, or you can keep the
definition closer and have a separate declaration.
> > > +
> > > reclaimed = try_to_free_mem_cgroup_pages(memcg,
> > > - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> > > - GFP_KERNEL, reclaim_options);
> > > + batch_size, GFP_KERNEL, reclaim_options);
> >
> > Also with the increased reclaim target do we need something like this?
> >
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 4f9c854ce6cc..94794cf5ee9f 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
> >
> > /* We are about to die and free our memory. Return now. */
> > if (fatal_signal_pending(current))
> > - return SWAP_CLUSTER_MAX;
> > + return sc->nr_to_reclaim;
> > }
> >
> > lru_add_drain();
> > >
> > > if (!reclaimed && !nr_retries--)
> > > return -EAGAIN;
> > > --
>
> This is interesting, but I don't think it's closely related to this
> change. This section looks like it was added to delay OOM kills due to
> apparent lack of reclaim progress when pages are isolated and the
> direct reclaimer is scheduled out. A couple things:
>
> In the context of proactive reclaim, current is not really undergoing
> reclaim due to memory pressure. It's initiated from userspace. So
> whether it has a fatal signal pending or not doesn't seem like it
> should influence the return value of shrink_inactive_list for some
> probably unrelated process. It seems more straightforward to me to
> return 0, and add another fatal signal pending check to the caller
> (shrink_lruvec) to bail out early (dealing with OOM kill avoidance
> there if necessary) instead of waiting to accumulate fake
> SWAP_CLUSTER_MAX values from shrink_inactive_list.
The point of this code is to bail out early if the caller has fatal
signals pending. That could be SIGTERM sent to the process performing
the reclaim for whatever reason. The bail out is tuned for
SWAP_CLUSTER_MAX as you can see and your patch is increasing the reclaim
target which means that bailout wouldn't work properly and you wouldn't
get any useful work done but not really bail out.
> As far as changing the value, SWAP_CLUSTER_MAX puts the final value of
> sc->nr_reclaimed pretty close to sc->nr_to_reclaim. Since there's a
> loop for each evictable lru in shrink_lruvec, we could end up with 4 *
> sc->nr_to_reclaim in sc->nr_reclaimed if we switched to
> sc->nr_to_reclaim from SWAP_CLUSTER_MAX... an even bigger lie. So I
> don't think we'd want to do that.
The actual number returned from the reclaim is not really important
because memory_reclaim would break out of the loop and userspace would
never see the result.
--
Michal Hocko
SUSE Labs
On Mon, Feb 5, 2024 at 11:40 AM Michal Hocko <[email protected]> wrote:
>
> On Mon 05-02-24 11:29:49, T.J. Mercier wrote:
> > On Mon, Feb 5, 2024 at 2:40 AM Michal Hocko <[email protected]> wrote:
> > >
> > > On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> > > > Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> > > > reclaim") we passed the number of pages for the reclaim request directly
> > > > to try_to_free_mem_cgroup_pages, which could lead to significant
> > > > overreclaim. After 0388536ac291 the number of pages was limited to a
> > > > maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> > > > However such a small batch size caused a regression in reclaim
> > > > performance due to many more reclaim start/stop cycles inside
> > > > memory_reclaim.
> > >
> > > You have mentioned that in one of the previous emails but it is good to
> > > mention what is the source of that overhead for the future reference.
> >
> > I can add a sentence about the restart cost being amortized over more
> > pages with a large batch size. It covers things like repeatedly
> > flushing stats, walking the tree, evaluating protection limits, etc.
> >
> > > > Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> > > > nodes and cgroups over which the pages are spread. As such, the bigger
> > > > the request, the bigger the absolute overreclaim error. Historic
> > > > in-kernel users of reclaim have used fixed, small sized requests to
> > > > approach an appropriate reclaim rate over time. When we reclaim a user
> > > > request of arbitrary size, use decaying batch sizes to manage error while
> > > > maintaining reasonable throughput.
> > >
> > > These numbers are with MGLRU or the default reclaim implementation?
> >
> > These numbers are for both. root uses the memcg LRU (MGLRU was
> > enabled), and /uid_0 does not.
>
> Thanks it would be nice to outline that in the changelog.
Ok, I'll update the table below for each case.
> > > > root - full reclaim pages/sec time (sec)
> > > > pre-0388536ac291 : 68047 10.46
> > > > post-0388536ac291 : 13742 inf
> > > > (reclaim-reclaimed)/4 : 67352 10.51
> > > >
> > > > /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> > > > pre-0388536ac291 : 258822 1.12 107.8
> > > > post-0388536ac291 : 105174 2.49 3.5
> > > > (reclaim-reclaimed)/4 : 233396 1.12 -7.4
> > > >
> > > > /uid_0 - full reclaim pages/sec time (sec)
> > > > pre-0388536ac291 : 72334 7.09
> > > > post-0388536ac291 : 38105 14.45
> > > > (reclaim-reclaimed)/4 : 72914 6.96
> > > >
> > > > Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> > > > Signed-off-by: T.J. Mercier <[email protected]>
> > > > Reviewed-by: Yosry Ahmed <[email protected]>
> > > > Acked-by: Johannes Weiner <[email protected]>
> > > >
> > > > ---
> > > > v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> > > > changes.
> > > > v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
> > > >
> > > > mm/memcontrol.c | 6 ++++--
> > > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > > > index 46d8d02114cf..f6ab61128869 100644
> > > > --- a/mm/memcontrol.c
> > > > +++ b/mm/memcontrol.c
> > > > @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > > > if (!nr_retries)
> > > > lru_add_drain_all();
> > > >
> > > > + /* Will converge on zero, but reclaim enforces a minimum */
> > > > + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
> > >
> > > This doesn't fit into the existing coding style. I do not think there is
> > > a strong reason to go against it here.
> >
> > There's been some back and forth here. You'd prefer to move this to
> > the top of the while loop, under the declaration of reclaimed? It's
> > farther from its use there, but it does match the existing style in
> > the file better.
>
> This is not something I deeply care about but generally it is better to
> not mix styles unless that is a clear win. If you want to save one LOC
> you can just move it up - just couple of lines up, or you can keep the
> definition closer and have a separate declaration.
I find it nicer to have to search as little as possible for both the
declaration (type) and definition, but I am not attached to it either
and it's not worth annoying anyone over here. Let's move it up like
Yosry suggested initially.
> > > > +
> > > > reclaimed = try_to_free_mem_cgroup_pages(memcg,
> > > > - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> > > > - GFP_KERNEL, reclaim_options);
> > > > + batch_size, GFP_KERNEL, reclaim_options);
> > >
> > > Also with the increased reclaim target do we need something like this?
> > >
> > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > index 4f9c854ce6cc..94794cf5ee9f 100644
> > > --- a/mm/vmscan.c
> > > +++ b/mm/vmscan.c
> > > @@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
> > >
> > > /* We are about to die and free our memory. Return now. */
> > > if (fatal_signal_pending(current))
> > > - return SWAP_CLUSTER_MAX;
> > > + return sc->nr_to_reclaim;
> > > }
> > >
> > > lru_add_drain();
> > > >
> > > > if (!reclaimed && !nr_retries--)
> > > > return -EAGAIN;
> > > > --
> >
> > This is interesting, but I don't think it's closely related to this
> > change. This section looks like it was added to delay OOM kills due to
> > apparent lack of reclaim progress when pages are isolated and the
> > direct reclaimer is scheduled out. A couple things:
> >
> > In the context of proactive reclaim, current is not really undergoing
> > reclaim due to memory pressure. It's initiated from userspace. So
> > whether it has a fatal signal pending or not doesn't seem like it
> > should influence the return value of shrink_inactive_list for some
> > probably unrelated process. It seems more straightforward to me to
> > return 0, and add another fatal signal pending check to the caller
> > (shrink_lruvec) to bail out early (dealing with OOM kill avoidance
> > there if necessary) instead of waiting to accumulate fake
> > SWAP_CLUSTER_MAX values from shrink_inactive_list.
>
> The point of this code is to bail out early if the caller has fatal
> signals pending. That could be SIGTERM sent to the process performing
> the reclaim for whatever reason. The bail out is tuned for
> SWAP_CLUSTER_MAX as you can see and your patch is increasing the reclaim
> target which means that bailout wouldn't work properly and you wouldn't
> get any useful work done but not really bail out.
It's increasing to 1/4 of what it was 6 months ago before 88536ac291
("mm:vmscan: fix inaccurate reclaim during proactive reclaim") and
this hasn't changed since then, so if anything the bailout should
happen quicker than originally tuned for.
> > As far as changing the value, SWAP_CLUSTER_MAX puts the final value of
> > sc->nr_reclaimed pretty close to sc->nr_to_reclaim. Since there's a
> > loop for each evictable lru in shrink_lruvec, we could end up with 4 *
> > sc->nr_to_reclaim in sc->nr_reclaimed if we switched to
> > sc->nr_to_reclaim from SWAP_CLUSTER_MAX... an even bigger lie. So I
> > don't think we'd want to do that.
>
> The actual number returned from the reclaim is not really important
> because memory_reclaim would break out of the loop and userspace would
> never see the result.
This makes sense, but it makes me uneasy. I can't point to anywhere
this would cause a problem currently (except maybe super unlikely
overflow of nr_reclaimed), but it feels like a setup for future
unintended consequences.
On Mon 05-02-24 12:26:10, T.J. Mercier wrote:
> On Mon, Feb 5, 2024 at 11:40 AM Michal Hocko <[email protected]> wrote:
> >
> > On Mon 05-02-24 11:29:49, T.J. Mercier wrote:
> > > On Mon, Feb 5, 2024 at 2:40 AM Michal Hocko <[email protected]> wrote:
> > > >
> > > > On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> > > > > Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> > > > > reclaim") we passed the number of pages for the reclaim request directly
> > > > > to try_to_free_mem_cgroup_pages, which could lead to significant
> > > > > overreclaim. After 0388536ac291 the number of pages was limited to a
> > > > > maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> > > > > However such a small batch size caused a regression in reclaim
> > > > > performance due to many more reclaim start/stop cycles inside
> > > > > memory_reclaim.
> > > >
> > > > You have mentioned that in one of the previous emails but it is good to
> > > > mention what is the source of that overhead for the future reference.
> > >
> > > I can add a sentence about the restart cost being amortized over more
> > > pages with a large batch size. It covers things like repeatedly
> > > flushing stats, walking the tree, evaluating protection limits, etc.
> > >
> > > > > Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> > > > > nodes and cgroups over which the pages are spread. As such, the bigger
> > > > > the request, the bigger the absolute overreclaim error. Historic
> > > > > in-kernel users of reclaim have used fixed, small sized requests to
> > > > > approach an appropriate reclaim rate over time. When we reclaim a user
> > > > > request of arbitrary size, use decaying batch sizes to manage error while
> > > > > maintaining reasonable throughput.
> > > >
> > > > These numbers are with MGLRU or the default reclaim implementation?
> > >
> > > These numbers are for both. root uses the memcg LRU (MGLRU was
> > > enabled), and /uid_0 does not.
> >
> > Thanks it would be nice to outline that in the changelog.
>
> Ok, I'll update the table below for each case.
>
> > > > > root - full reclaim pages/sec time (sec)
> > > > > pre-0388536ac291 : 68047 10.46
> > > > > post-0388536ac291 : 13742 inf
> > > > > (reclaim-reclaimed)/4 : 67352 10.51
> > > > >
> > > > > /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> > > > > pre-0388536ac291 : 258822 1.12 107.8
> > > > > post-0388536ac291 : 105174 2.49 3.5
> > > > > (reclaim-reclaimed)/4 : 233396 1.12 -7.4
> > > > >
> > > > > /uid_0 - full reclaim pages/sec time (sec)
> > > > > pre-0388536ac291 : 72334 7.09
> > > > > post-0388536ac291 : 38105 14.45
> > > > > (reclaim-reclaimed)/4 : 72914 6.96
> > > > >
> > > > > Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> > > > > Signed-off-by: T.J. Mercier <[email protected]>
> > > > > Reviewed-by: Yosry Ahmed <[email protected]>
> > > > > Acked-by: Johannes Weiner <[email protected]>
> > > > >
> > > > > ---
> > > > > v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> > > > > changes.
> > > > > v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
> > > > >
> > > > > mm/memcontrol.c | 6 ++++--
> > > > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > > > > index 46d8d02114cf..f6ab61128869 100644
> > > > > --- a/mm/memcontrol.c
> > > > > +++ b/mm/memcontrol.c
> > > > > @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > > > > if (!nr_retries)
> > > > > lru_add_drain_all();
> > > > >
> > > > > + /* Will converge on zero, but reclaim enforces a minimum */
> > > > > + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
> > > >
> > > > This doesn't fit into the existing coding style. I do not think there is
> > > > a strong reason to go against it here.
> > >
> > > There's been some back and forth here. You'd prefer to move this to
> > > the top of the while loop, under the declaration of reclaimed? It's
> > > farther from its use there, but it does match the existing style in
> > > the file better.
> >
> > This is not something I deeply care about but generally it is better to
> > not mix styles unless that is a clear win. If you want to save one LOC
> > you can just move it up - just couple of lines up, or you can keep the
> > definition closer and have a separate declaration.
>
> I find it nicer to have to search as little as possible for both the
> declaration (type) and definition, but I am not attached to it either
> and it's not worth annoying anyone over here. Let's move it up like
> Yosry suggested initially.
>
> > > > > +
> > > > > reclaimed = try_to_free_mem_cgroup_pages(memcg,
> > > > > - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> > > > > - GFP_KERNEL, reclaim_options);
> > > > > + batch_size, GFP_KERNEL, reclaim_options);
> > > >
> > > > Also with the increased reclaim target do we need something like this?
> > > >
> > > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > > index 4f9c854ce6cc..94794cf5ee9f 100644
> > > > --- a/mm/vmscan.c
> > > > +++ b/mm/vmscan.c
> > > > @@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
> > > >
> > > > /* We are about to die and free our memory. Return now. */
> > > > if (fatal_signal_pending(current))
> > > > - return SWAP_CLUSTER_MAX;
> > > > + return sc->nr_to_reclaim;
> > > > }
> > > >
> > > > lru_add_drain();
> > > > >
> > > > > if (!reclaimed && !nr_retries--)
> > > > > return -EAGAIN;
> > > > > --
> > >
> > > This is interesting, but I don't think it's closely related to this
> > > change. This section looks like it was added to delay OOM kills due to
> > > apparent lack of reclaim progress when pages are isolated and the
> > > direct reclaimer is scheduled out. A couple things:
> > >
> > > In the context of proactive reclaim, current is not really undergoing
> > > reclaim due to memory pressure. It's initiated from userspace. So
> > > whether it has a fatal signal pending or not doesn't seem like it
> > > should influence the return value of shrink_inactive_list for some
> > > probably unrelated process. It seems more straightforward to me to
> > > return 0, and add another fatal signal pending check to the caller
> > > (shrink_lruvec) to bail out early (dealing with OOM kill avoidance
> > > there if necessary) instead of waiting to accumulate fake
> > > SWAP_CLUSTER_MAX values from shrink_inactive_list.
> >
> > The point of this code is to bail out early if the caller has fatal
> > signals pending. That could be SIGTERM sent to the process performing
> > the reclaim for whatever reason. The bail out is tuned for
> > SWAP_CLUSTER_MAX as you can see and your patch is increasing the reclaim
> > target which means that bailout wouldn't work properly and you wouldn't
> > get any useful work done but not really bail out.
>
> It's increasing to 1/4 of what it was 6 months ago before 88536ac291
> ("mm:vmscan: fix inaccurate reclaim during proactive reclaim") and
> this hasn't changed since then, so if anything the bailout should
> happen quicker than originally tuned for.
Yes, this wasn't handled properly back then either.
> > > As far as changing the value, SWAP_CLUSTER_MAX puts the final value of
> > > sc->nr_reclaimed pretty close to sc->nr_to_reclaim. Since there's a
> > > loop for each evictable lru in shrink_lruvec, we could end up with 4 *
> > > sc->nr_to_reclaim in sc->nr_reclaimed if we switched to
> > > sc->nr_to_reclaim from SWAP_CLUSTER_MAX... an even bigger lie. So I
> > > don't think we'd want to do that.
> >
> > The actual number returned from the reclaim is not really important
> > because memory_reclaim would break out of the loop and userspace would
> > never see the result.
>
> This makes sense, but it makes me uneasy. I can't point to anywhere
> this would cause a problem currently (except maybe super unlikely
> overflow of nr_reclaimed), but it feels like a setup for future
> unintended consequences.
This of something like
timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
where timeout acts as a stop gap if the reclaim cannot finish in
TIMEOUT.
--
Michal Hocko
SUSE Labs
On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
>
> On Mon 05-02-24 12:26:10, T.J. Mercier wrote:
> > On Mon, Feb 5, 2024 at 11:40 AM Michal Hocko <[email protected]> wrote:
> > >
> > > On Mon 05-02-24 11:29:49, T.J. Mercier wrote:
> > > > On Mon, Feb 5, 2024 at 2:40 AM Michal Hocko <[email protected]> wrote:
> > > > >
> > > > > On Fri 02-02-24 23:38:54, T.J. Mercier wrote:
> > > > > > Before 388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive
> > > > > > reclaim") we passed the number of pages for the reclaim request directly
> > > > > > to try_to_free_mem_cgroup_pages, which could lead to significant
> > > > > > overreclaim. After 0388536ac291 the number of pages was limited to a
> > > > > > maximum 32 (SWAP_CLUSTER_MAX) to reduce the amount of overreclaim.
> > > > > > However such a small batch size caused a regression in reclaim
> > > > > > performance due to many more reclaim start/stop cycles inside
> > > > > > memory_reclaim.
> > > > >
> > > > > You have mentioned that in one of the previous emails but it is good to
> > > > > mention what is the source of that overhead for the future reference.
> > > >
> > > > I can add a sentence about the restart cost being amortized over more
> > > > pages with a large batch size. It covers things like repeatedly
> > > > flushing stats, walking the tree, evaluating protection limits, etc.
> > > >
> > > > > > Reclaim tries to balance nr_to_reclaim fidelity with fairness across
> > > > > > nodes and cgroups over which the pages are spread. As such, the bigger
> > > > > > the request, the bigger the absolute overreclaim error. Historic
> > > > > > in-kernel users of reclaim have used fixed, small sized requests to
> > > > > > approach an appropriate reclaim rate over time. When we reclaim a user
> > > > > > request of arbitrary size, use decaying batch sizes to manage error while
> > > > > > maintaining reasonable throughput.
> > > > >
> > > > > These numbers are with MGLRU or the default reclaim implementation?
> > > >
> > > > These numbers are for both. root uses the memcg LRU (MGLRU was
> > > > enabled), and /uid_0 does not.
> > >
> > > Thanks it would be nice to outline that in the changelog.
> >
> > Ok, I'll update the table below for each case.
> >
> > > > > > root - full reclaim pages/sec time (sec)
> > > > > > pre-0388536ac291 : 68047 10.46
> > > > > > post-0388536ac291 : 13742 inf
> > > > > > (reclaim-reclaimed)/4 : 67352 10.51
> > > > > >
> > > > > > /uid_0 - 1G reclaim pages/sec time (sec) overreclaim (MiB)
> > > > > > pre-0388536ac291 : 258822 1.12 107.8
> > > > > > post-0388536ac291 : 105174 2.49 3.5
> > > > > > (reclaim-reclaimed)/4 : 233396 1.12 -7.4
> > > > > >
> > > > > > /uid_0 - full reclaim pages/sec time (sec)
> > > > > > pre-0388536ac291 : 72334 7.09
> > > > > > post-0388536ac291 : 38105 14.45
> > > > > > (reclaim-reclaimed)/4 : 72914 6.96
> > > > > >
> > > > > > Fixes: 0388536ac291 ("mm:vmscan: fix inaccurate reclaim during proactive reclaim")
> > > > > > Signed-off-by: T.J. Mercier <[email protected]>
> > > > > > Reviewed-by: Yosry Ahmed <[email protected]>
> > > > > > Acked-by: Johannes Weiner <[email protected]>
> > > > > >
> > > > > > ---
> > > > > > v3: Formatting fixes per Yosry Ahmed and Johannes Weiner. No functional
> > > > > > changes.
> > > > > > v2: Simplify the request size calculation per Johannes Weiner and Michal Koutný
> > > > > >
> > > > > > mm/memcontrol.c | 6 ++++--
> > > > > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > > > > > index 46d8d02114cf..f6ab61128869 100644
> > > > > > --- a/mm/memcontrol.c
> > > > > > +++ b/mm/memcontrol.c
> > > > > > @@ -6976,9 +6976,11 @@ static ssize_t memory_reclaim(struct kernfs_open_file *of, char *buf,
> > > > > > if (!nr_retries)
> > > > > > lru_add_drain_all();
> > > > > >
> > > > > > + /* Will converge on zero, but reclaim enforces a minimum */
> > > > > > + unsigned long batch_size = (nr_to_reclaim - nr_reclaimed) / 4;
> > > > >
> > > > > This doesn't fit into the existing coding style. I do not think there is
> > > > > a strong reason to go against it here.
> > > >
> > > > There's been some back and forth here. You'd prefer to move this to
> > > > the top of the while loop, under the declaration of reclaimed? It's
> > > > farther from its use there, but it does match the existing style in
> > > > the file better.
> > >
> > > This is not something I deeply care about but generally it is better to
> > > not mix styles unless that is a clear win. If you want to save one LOC
> > > you can just move it up - just couple of lines up, or you can keep the
> > > definition closer and have a separate declaration.
> >
> > I find it nicer to have to search as little as possible for both the
> > declaration (type) and definition, but I am not attached to it either
> > and it's not worth annoying anyone over here. Let's move it up like
> > Yosry suggested initially.
> >
> > > > > > +
> > > > > > reclaimed = try_to_free_mem_cgroup_pages(memcg,
> > > > > > - min(nr_to_reclaim - nr_reclaimed, SWAP_CLUSTER_MAX),
> > > > > > - GFP_KERNEL, reclaim_options);
> > > > > > + batch_size, GFP_KERNEL, reclaim_options);
> > > > >
> > > > > Also with the increased reclaim target do we need something like this?
> > > > >
> > > > > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > > > > index 4f9c854ce6cc..94794cf5ee9f 100644
> > > > > --- a/mm/vmscan.c
> > > > > +++ b/mm/vmscan.c
> > > > > @@ -1889,7 +1889,7 @@ static unsigned long shrink_inactive_list(unsigned long nr_to_scan,
> > > > >
> > > > > /* We are about to die and free our memory. Return now. */
> > > > > if (fatal_signal_pending(current))
> > > > > - return SWAP_CLUSTER_MAX;
> > > > > + return sc->nr_to_reclaim;
> > > > > }
> > > > >
> > > > > lru_add_drain();
> > > > > >
> > > > > > if (!reclaimed && !nr_retries--)
> > > > > > return -EAGAIN;
> > > > > > --
> > > >
> > > > This is interesting, but I don't think it's closely related to this
> > > > change. This section looks like it was added to delay OOM kills due to
> > > > apparent lack of reclaim progress when pages are isolated and the
> > > > direct reclaimer is scheduled out. A couple things:
> > > >
> > > > In the context of proactive reclaim, current is not really undergoing
> > > > reclaim due to memory pressure. It's initiated from userspace. So
> > > > whether it has a fatal signal pending or not doesn't seem like it
> > > > should influence the return value of shrink_inactive_list for some
> > > > probably unrelated process. It seems more straightforward to me to
> > > > return 0, and add another fatal signal pending check to the caller
> > > > (shrink_lruvec) to bail out early (dealing with OOM kill avoidance
> > > > there if necessary) instead of waiting to accumulate fake
> > > > SWAP_CLUSTER_MAX values from shrink_inactive_list.
> > >
> > > The point of this code is to bail out early if the caller has fatal
> > > signals pending. That could be SIGTERM sent to the process performing
> > > the reclaim for whatever reason. The bail out is tuned for
> > > SWAP_CLUSTER_MAX as you can see and your patch is increasing the reclaim
> > > target which means that bailout wouldn't work properly and you wouldn't
> > > get any useful work done but not really bail out.
> >
> > It's increasing to 1/4 of what it was 6 months ago before 88536ac291
> > ("mm:vmscan: fix inaccurate reclaim during proactive reclaim") and
> > this hasn't changed since then, so if anything the bailout should
> > happen quicker than originally tuned for.
>
> Yes, this wasn't handled properly back then either.
>
> > > > As far as changing the value, SWAP_CLUSTER_MAX puts the final value of
> > > > sc->nr_reclaimed pretty close to sc->nr_to_reclaim. Since there's a
> > > > loop for each evictable lru in shrink_lruvec, we could end up with 4 *
> > > > sc->nr_to_reclaim in sc->nr_reclaimed if we switched to
> > > > sc->nr_to_reclaim from SWAP_CLUSTER_MAX... an even bigger lie. So I
> > > > don't think we'd want to do that.
> > >
> > > The actual number returned from the reclaim is not really important
> > > because memory_reclaim would break out of the loop and userspace would
> > > never see the result.
> >
> > This makes sense, but it makes me uneasy. I can't point to anywhere
> > this would cause a problem currently (except maybe super unlikely
> > overflow of nr_reclaimed), but it feels like a setup for future
> > unintended consequences.
>
> This of something like
> timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> where timeout acts as a stop gap if the reclaim cannot finish in
> TIMEOUT.
Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
it is what's bothering me.
It's already wired up that way though, so if you want to make this
change now then I can try to test for the difference using really
large reclaim targets.
On Mon 05-02-24 12:47:47, T.J. Mercier wrote:
> On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
[...]
> > This of something like
> > timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> > where timeout acts as a stop gap if the reclaim cannot finish in
> > TIMEOUT.
>
> Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
> it is what's bothering me.
I am not really happy about this subtlety. If we have a better way then
let's do it. Better in its own patch, though.
> It's already wired up that way though, so if you want to make this
> change now then I can try to test for the difference using really
> large reclaim targets.
Yes, please. If you want it a separate patch then no objection from me
of course. If you do no like the nr_to_reclaim bailout then maybe we can
go with a simple break out flag in scan_control.
Thanks!
--
Michal Hocko
SUSE Labs
On Mon, Feb 5, 2024 at 1:16 PM Michal Hocko <[email protected]> wrote:
>
> On Mon 05-02-24 12:47:47, T.J. Mercier wrote:
> > On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
> [...]
> > > This of something like
> > > timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> > > where timeout acts as a stop gap if the reclaim cannot finish in
> > > TIMEOUT.
> >
> > Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
> > it is what's bothering me.
>
> I am not really happy about this subtlety. If we have a better way then
> let's do it. Better in its own patch, though.
>
> > It's already wired up that way though, so if you want to make this
> > change now then I can try to test for the difference using really
> > large reclaim targets.
>
> Yes, please. If you want it a separate patch then no objection from me
> of course. If you do no like the nr_to_reclaim bailout then maybe we can
> go with a simple break out flag in scan_control.
>
> Thanks!
It's a bit difficult to test under the too_many_isolated check, so I
moved the fatal_signal_pending check outside and tried with that.
Performing full reclaim on the /uid_0 cgroup with a 250ms delay before
SIGKILL, I got an average of 16ms better latency with
sc->nr_to_reclaim across 20 runs ignoring one 1s outlier with
SWAP_CLUSTER_MAX.
The return values from memory_reclaim are different since with
sc->nr_to_reclaim we "succeed" and don't reach the signal_pending
check to return -EINTR, but I don't think it matters since the return
code is 137 (SIGKILL) in both cases.
With SWAP_CLUSTER_MAX there was an outlier at nearly 1s, and in
general the latency numbers were noiser: 2% RSD vs 13% RSD. I'm
guessing that's a function of nr_to_scan being occasionally much less
than SWAP_CLUSTER_MAX causing nr[lru] to drain slowly. But it could
also have simply been scheduled out more often at the cond_resched in
shrink_lruvec, and that would help explain the 1s outlier. I don't
have enough debug info on the outlier to say much more.
With sc->nr_to_reclaim, the largest sc->nr_reclaimed value I saw was
about 2^53 for a sc->nr_to_reclaim of 2^51, but for large memcg
hierarchies I think it's possible to get more than that. There were
only 15 cgroups under /uid_0. This is the only thing that gives me
pause, since we could touch more than 2k cgroups in
shrink_node_memcgs, each one adding 4 * 2^51, potentially overflowing
sc->nr_to_reclaim. Looks testable but I didn't get to it.
On Mon 05-02-24 20:01:40, T.J. Mercier wrote:
> On Mon, Feb 5, 2024 at 1:16 PM Michal Hocko <[email protected]> wrote:
> >
> > On Mon 05-02-24 12:47:47, T.J. Mercier wrote:
> > > On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
> > [...]
> > > > This of something like
> > > > timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> > > > where timeout acts as a stop gap if the reclaim cannot finish in
> > > > TIMEOUT.
> > >
> > > Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
> > > it is what's bothering me.
> >
> > I am not really happy about this subtlety. If we have a better way then
> > let's do it. Better in its own patch, though.
> >
> > > It's already wired up that way though, so if you want to make this
> > > change now then I can try to test for the difference using really
> > > large reclaim targets.
> >
> > Yes, please. If you want it a separate patch then no objection from me
> > of course. If you do no like the nr_to_reclaim bailout then maybe we can
> > go with a simple break out flag in scan_control.
> >
> > Thanks!
>
> It's a bit difficult to test under the too_many_isolated check, so I
> moved the fatal_signal_pending check outside and tried with that.
> Performing full reclaim on the /uid_0 cgroup with a 250ms delay before
> SIGKILL, I got an average of 16ms better latency with
> sc->nr_to_reclaim across 20 runs ignoring one 1s outlier with
> SWAP_CLUSTER_MAX.
This will obviously scale with the number of memcgs in the hierarchy but
you are right that too_many_isolated makes the whole fatal_signal_pending
check rather inefficient. I haven't missed that. The reclaim path is
rather convoluted so this will likely be more complex than I
anticipated. I will think about that some more.
In order to not delay your patch, please repost with suggested updates
to the changelog. This needs addressing IMO but I do not think this is
critical at this stage.
--
Michal Hocko
SUSE Labs
On Tue 06-02-24 09:58:41, Michal Hocko wrote:
> On Mon 05-02-24 20:01:40, T.J. Mercier wrote:
> > On Mon, Feb 5, 2024 at 1:16 PM Michal Hocko <[email protected]> wrote:
> > >
> > > On Mon 05-02-24 12:47:47, T.J. Mercier wrote:
> > > > On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
> > > [...]
> > > > > This of something like
> > > > > timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> > > > > where timeout acts as a stop gap if the reclaim cannot finish in
> > > > > TIMEOUT.
> > > >
> > > > Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
> > > > it is what's bothering me.
> > >
> > > I am not really happy about this subtlety. If we have a better way then
> > > let's do it. Better in its own patch, though.
> > >
> > > > It's already wired up that way though, so if you want to make this
> > > > change now then I can try to test for the difference using really
> > > > large reclaim targets.
> > >
> > > Yes, please. If you want it a separate patch then no objection from me
> > > of course. If you do no like the nr_to_reclaim bailout then maybe we can
> > > go with a simple break out flag in scan_control.
> > >
> > > Thanks!
> >
> > It's a bit difficult to test under the too_many_isolated check, so I
> > moved the fatal_signal_pending check outside and tried with that.
> > Performing full reclaim on the /uid_0 cgroup with a 250ms delay before
> > SIGKILL, I got an average of 16ms better latency with
> > sc->nr_to_reclaim across 20 runs ignoring one 1s outlier with
> > SWAP_CLUSTER_MAX.
>
> This will obviously scale with the number of memcgs in the hierarchy but
> you are right that too_many_isolated makes the whole fatal_signal_pending
> check rather inefficient. I haven't missed that. The reclaim path is
> rather convoluted so this will likely be more complex than I
> anticipated. I will think about that some more.
>
> In order to not delay your patch, please repost with suggested updates
> to the changelog. This needs addressing IMO but I do not think this is
> critical at this stage.
Has there been a new version or a proposal to refine the changelog
posted?
--
Michal Hocko
SUSE Labs
On Mon 19-02-24 08:39:19, T.J. Mercier wrote:
> On Mon, Feb 19, 2024 at 4:11 AM Michal Hocko <[email protected]> wrote:
> >
> > On Tue 06-02-24 09:58:41, Michal Hocko wrote:
> > > On Mon 05-02-24 20:01:40, T.J. Mercier wrote:
> > > > On Mon, Feb 5, 2024 at 1:16 PM Michal Hocko <[email protected]> wrote:
> > > > >
> > > > > On Mon 05-02-24 12:47:47, T.J. Mercier wrote:
> > > > > > On Mon, Feb 5, 2024 at 12:36 PM Michal Hocko <[email protected]> wrote:
> > > > > [...]
> > > > > > > This of something like
> > > > > > > timeout $TIMEOUT echo $TARGET > $MEMCG_PATH/memory.reclaim
> > > > > > > where timeout acts as a stop gap if the reclaim cannot finish in
> > > > > > > TIMEOUT.
> > > > > >
> > > > > > Yeah I get the desired behavior, but using sc->nr_reclaimed to achieve
> > > > > > it is what's bothering me.
> > > > >
> > > > > I am not really happy about this subtlety. If we have a better way then
> > > > > let's do it. Better in its own patch, though.
> > > > >
> > > > > > It's already wired up that way though, so if you want to make this
> > > > > > change now then I can try to test for the difference using really
> > > > > > large reclaim targets.
> > > > >
> > > > > Yes, please. If you want it a separate patch then no objection from me
> > > > > of course. If you do no like the nr_to_reclaim bailout then maybe we can
> > > > > go with a simple break out flag in scan_control.
> > > > >
> > > > > Thanks!
> > > >
> > > > It's a bit difficult to test under the too_many_isolated check, so I
> > > > moved the fatal_signal_pending check outside and tried with that.
> > > > Performing full reclaim on the /uid_0 cgroup with a 250ms delay before
> > > > SIGKILL, I got an average of 16ms better latency with
> > > > sc->nr_to_reclaim across 20 runs ignoring one 1s outlier with
> > > > SWAP_CLUSTER_MAX.
> > >
> > > This will obviously scale with the number of memcgs in the hierarchy but
> > > you are right that too_many_isolated makes the whole fatal_signal_pending
> > > check rather inefficient. I haven't missed that. The reclaim path is
> > > rather convoluted so this will likely be more complex than I
> > > anticipated. I will think about that some more.
> > >
> > > In order to not delay your patch, please repost with suggested updates
> > > to the changelog. This needs addressing IMO but I do not think this is
> > > critical at this stage.
> >
> > Has there been a new version or a proposal to refine the changelog
> > posted?
>
> Hi Michal,
>
> I updated the commit message in V4 to include a sentence about restart
> cost, and added a line above each reclaim test to note the MGLRU
> config and whether the memcg LRU was used or not.
>
> https://lore.kernel.org/all/[email protected]/
Hmm, missed that one for some reason.
--
Michal Hocko
SUSE Labs