In the copy_from/to_user scenario, due to the need to accurately
calculate the number of copied bytes for fixup, it is necessary to
increment the values of src and dst after each copy of the data.
Therefore, this introduce RAW dependency which result in some bubble
in pipline and degrade the IPC.
Consider updating the values of src and dst only when the copy is
completed in the current stage to reduce data dependence. But this will
break the function of fixup, so in order to maintain the function of
fixup, a new variable is introduced to record the number of bytes to be
copied in the current stage. Once an access exception occurs, the variable
can be used to determined the final index of access exception by copying
byte-by-byte.
Here are the test result:
Copy 128 bytes cost on Kunpeng-920(us):
Without this patch:
copy_from_user: 1.0187 copy_to_user: 1.1021
With this patch:
copy_from_user: 0.9523 copy_to_user: 1.0159
It's about 7% improvement in copy_from/to_user()
Signed-off-by: Li Zetao <[email protected]>
---
arch/arm64/include/asm/asm-uaccess.h | 14 +++---
arch/arm64/lib/copy_from_user.S | 21 +++++++--
arch/arm64/lib/copy_template.S | 66 +++++++++++++++++-----------
arch/arm64/lib/copy_to_user.S | 22 +++++++---
4 files changed, 81 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
index 5b6efe8abeeb..ccbde0d0c113 100644
--- a/arch/arm64/include/asm/asm-uaccess.h
+++ b/arch/arm64/include/asm/asm-uaccess.h
@@ -66,19 +66,17 @@ alternative_else_nop_endif
* This is complicated as there is no post-increment or pair versions of the
* unprivileged instructions, and USER() only works for single instructions.
*/
- .macro user_ldp l, reg1, reg2, addr, post_inc
-8888: ldtr \reg1, [\addr];
-8889: ldtr \reg2, [\addr, #8];
- add \addr, \addr, \post_inc;
+ .macro user_ldp l, reg1, reg2, addr, offs_inc
+8888: ldtr \reg1, [\addr, \offs_inc];
+8889: ldtr \reg2, [\addr, \offs_inc + 8];
_asm_extable_uaccess 8888b, \l;
_asm_extable_uaccess 8889b, \l;
.endm
- .macro user_stp l, reg1, reg2, addr, post_inc
-8888: sttr \reg1, [\addr];
-8889: sttr \reg2, [\addr, #8];
- add \addr, \addr, \post_inc;
+ .macro user_stp l, reg1, reg2, addr, offs_inc
+8888: sttr \reg1, [\addr, \offs_inc];
+8889: sttr \reg2, [\addr, \offs_inc + 8];
_asm_extable_uaccess 8888b,\l;
_asm_extable_uaccess 8889b,\l;
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index 34e317907524..c575829b85be 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -49,7 +49,7 @@
.endm
.macro stp1 reg1, reg2, ptr, val
- stp \reg1, \reg2, [\ptr], \val
+ stp \reg1, \reg2, [\ptr, \val]
.endm
end .req x5
@@ -62,12 +62,25 @@ SYM_FUNC_START(__arch_copy_from_user)
ret
// Exception fixups
-9997: cmp dst, dstin
+9997: sub x7, src, srcin
+ sub x8, dst, dstin
+ cmp x7, x8
+ b.le no_need_to_adjust_src
+ sub x9, x7, x8
+ sub src, src, p_copy
+ add p_copy, p_copy, x9
+no_need_to_adjust_src:
+ cmp dst, dstin
b.ne 9998f
// Before being absolutely sure we couldn't copy anything, try harder
-USER(9998f, ldtrb tmp1w, [srcin])
+calculate_bytes_copied:
+USER(9999f, ldtrb tmp1w, [src])
strb tmp1w, [dst], #1
-9998: sub x0, end, dst // bytes not copied
+ add src, src, #1
+ sub p_copy, p_copy, #1
+9998: cmp p_copy, 0
+ b.ge calculate_bytes_copied
+9999: sub x0, end, dst // bytes not copied
ret
SYM_FUNC_END(__arch_copy_from_user)
EXPORT_SYMBOL(__arch_copy_from_user)
diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
index 488df234c49a..8832b9fd0257 100644
--- a/arch/arm64/lib/copy_template.S
+++ b/arch/arm64/lib/copy_template.S
@@ -29,6 +29,7 @@ tmp1w .req w3
tmp2 .req x4
tmp2w .req w4
dst .req x6
+p_copy .req x16
A_l .req x7
A_h .req x8
@@ -39,6 +40,7 @@ C_h .req x12
D_l .req x13
D_h .req x14
+ mov p_copy, 16
mov dst, dstin
cmp count, #16
/*When memory length is less than 16, the accessed are not aligned.*/
@@ -82,19 +84,26 @@ D_h .req x14
* Copy up to 48 bytes of data. At this point we only need the
* bottom 6 bits of count to be accurate.
*/
+ mov p_copy, #16
ands tmp1, count, #0x30
b.eq .Ltiny15
cmp tmp1w, #0x20
b.eq 1f
b.lt 2f
- ldp1 A_l, A_h, src, #16
- stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #0
+ stp1 A_l, A_h, dst, #0
+ add src, src, #16
+ add dst, dst, #16
1:
- ldp1 A_l, A_h, src, #16
- stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #0
+ stp1 A_l, A_h, dst, #0
+ add src, src, #16
+ add dst, dst, #16
2:
- ldp1 A_l, A_h, src, #16
- stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #0
+ stp1 A_l, A_h, dst, #0
+ add src, src, #16
+ add dst, dst, #16
.Ltiny15:
/*
* Prefer to break one ldp/stp into several load/store to access
@@ -126,20 +135,23 @@ D_h .req x14
b .Lexitfunc
.Lcpy_over64:
+ mov p_copy, #64
subs count, count, #128
b.ge .Lcpy_body_large
/*
* Less than 128 bytes to copy, so handle 64 here and then jump
* to the tail.
*/
- ldp1 A_l, A_h, src, #16
- stp1 A_l, A_h, dst, #16
+ ldp1 A_l, A_h, src, #0
+ stp1 A_l, A_h, dst, #0
ldp1 B_l, B_h, src, #16
- ldp1 C_l, C_h, src, #16
+ ldp1 C_l, C_h, src, #32
stp1 B_l, B_h, dst, #16
- stp1 C_l, C_h, dst, #16
- ldp1 D_l, D_h, src, #16
- stp1 D_l, D_h, dst, #16
+ stp1 C_l, C_h, dst, #32
+ ldp1 D_l, D_h, src, #48
+ stp1 D_l, D_h, dst, #48
+ add src, src, #64
+ add dst, dst, #64
tst count, #0x3f
b.ne .Ltail63
@@ -152,30 +164,34 @@ D_h .req x14
.p2align L1_CACHE_SHIFT
.Lcpy_body_large:
/* pre-get 64 bytes data. */
- ldp1 A_l, A_h, src, #16
+ ldp1 A_l, A_h, src, #0
ldp1 B_l, B_h, src, #16
- ldp1 C_l, C_h, src, #16
- ldp1 D_l, D_h, src, #16
+ ldp1 C_l, C_h, src, #32
+ ldp1 D_l, D_h, src, #48
+ add src, src, #64
1:
/*
* interlace the load of next 64 bytes data block with store of the last
* loaded 64 bytes data.
*/
- stp1 A_l, A_h, dst, #16
- ldp1 A_l, A_h, src, #16
+ stp1 A_l, A_h, dst, #0
+ ldp1 A_l, A_h, src, #0
stp1 B_l, B_h, dst, #16
ldp1 B_l, B_h, src, #16
- stp1 C_l, C_h, dst, #16
- ldp1 C_l, C_h, src, #16
- stp1 D_l, D_h, dst, #16
- ldp1 D_l, D_h, src, #16
+ stp1 C_l, C_h, dst, #32
+ ldp1 C_l, C_h, src, #32
+ stp1 D_l, D_h, dst, #48
+ ldp1 D_l, D_h, src, #48
+ add src, src, #64
+ add dst, dst, #64
subs count, count, #64
b.ge 1b
- stp1 A_l, A_h, dst, #16
+ stp1 A_l, A_h, dst, #0
stp1 B_l, B_h, dst, #16
- stp1 C_l, C_h, dst, #16
- stp1 D_l, D_h, dst, #16
+ stp1 C_l, C_h, dst, #32
+ stp1 D_l, D_h, dst, #48
+ add dst, dst, #64
tst count, #0x3f
b.ne .Ltail63
-.Lexitfunc:
+.Lexitfunc: mov p_copy, #0
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index 802231772608..89db19e09ca2 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -44,7 +44,7 @@
.endm
.macro ldp1 reg1, reg2, ptr, val
- ldp \reg1, \reg2, [\ptr], \val
+ ldp \reg1, \reg2, [\ptr, \val]
.endm
.macro stp1 reg1, reg2, ptr, val
@@ -61,13 +61,25 @@ SYM_FUNC_START(__arch_copy_to_user)
ret
// Exception fixups
-9997: cmp dst, dstin
+9997: sub x7, src, srcin
+ sub x8, dst, dstin
+ cmp x7, x8
+ b.le no_need_to_adjust_src
+ sub x9, x7, x8
+ sub src, src, x9
+ add p_copy, p_copy, x9
+no_need_to_adjust_src:
+ cmp dst, dstin
b.ne 9998f
// Before being absolutely sure we couldn't copy anything, try harder
- ldrb tmp1w, [srcin]
-USER(9998f, sttrb tmp1w, [dst])
+calculate_bytes_copied:
+ ldrb tmp1w, [src], #1
+USER(9999f, sttrb tmp1w, [dst])
add dst, dst, #1
-9998: sub x0, end, dst // bytes not copied
+ sub p_copy, p_copy, #1
+9998: cmp p_copy, 0
+ b.ge calculate_bytes_copied
+9999: sub x0, end, dst // bytes not copied
ret
SYM_FUNC_END(__arch_copy_to_user)
EXPORT_SYMBOL(__arch_copy_to_user)
--
2.34.1
On Tue, Mar 12, 2024 at 11:08:45PM +0800, Li Zetao wrote:
> In the copy_from/to_user scenario, due to the need to accurately
> calculate the number of copied bytes for fixup, it is necessary to
> increment the values of src and dst after each copy of the data.
> Therefore, this introduce RAW dependency which result in some bubble
> in pipline and degrade the IPC.
>
> Consider updating the values of src and dst only when the copy is
> completed in the current stage to reduce data dependence. But this will
> break the function of fixup, so in order to maintain the function of
> fixup, a new variable is introduced to record the number of bytes to be
> copied in the current stage. Once an access exception occurs, the variable
> can be used to determined the final index of access exception by copying
> byte-by-byte.
>
> Here are the test result:
> Copy 128 bytes cost on Kunpeng-920(us):
> Without this patch:
> copy_from_user: 1.0187 copy_to_user: 1.1021
>
> With this patch:
> copy_from_user: 0.9523 copy_to_user: 1.0159
>
> It's about 7% improvement in copy_from/to_user()
How exactly are you testing this? Can you share your test code?
The current structure of this code (and e.g. the use of write-back addressing)
is largely force upon us by the structure of the Cortex strings functions,
which are already painful enough to read and work on. If we're going to rewrite
those I'd rather we abandoned the Cortex strings template for usercopies.
I had previously attempted to rewrite some of these along with some functional
tests:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Could you give those a go? Specifically, could you see how copy_to_user()
performs with the patch at:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
.. if that gets you a similar benefit I'd be happy to revive the series and
give copy_from_user() similar treatment.
Thanks,
Mark.
> Signed-off-by: Li Zetao <[email protected]>
> ---
> arch/arm64/include/asm/asm-uaccess.h | 14 +++---
> arch/arm64/lib/copy_from_user.S | 21 +++++++--
> arch/arm64/lib/copy_template.S | 66 +++++++++++++++++-----------
> arch/arm64/lib/copy_to_user.S | 22 +++++++---
> 4 files changed, 81 insertions(+), 42 deletions(-)
>
> diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
> index 5b6efe8abeeb..ccbde0d0c113 100644
> --- a/arch/arm64/include/asm/asm-uaccess.h
> +++ b/arch/arm64/include/asm/asm-uaccess.h
> @@ -66,19 +66,17 @@ alternative_else_nop_endif
> * This is complicated as there is no post-increment or pair versions of the
> * unprivileged instructions, and USER() only works for single instructions.
> */
> - .macro user_ldp l, reg1, reg2, addr, post_inc
> -8888: ldtr \reg1, [\addr];
> -8889: ldtr \reg2, [\addr, #8];
> - add \addr, \addr, \post_inc;
> + .macro user_ldp l, reg1, reg2, addr, offs_inc
> +8888: ldtr \reg1, [\addr, \offs_inc];
> +8889: ldtr \reg2, [\addr, \offs_inc + 8];
>
> _asm_extable_uaccess 8888b, \l;
> _asm_extable_uaccess 8889b, \l;
> .endm
>
> - .macro user_stp l, reg1, reg2, addr, post_inc
> -8888: sttr \reg1, [\addr];
> -8889: sttr \reg2, [\addr, #8];
> - add \addr, \addr, \post_inc;
> + .macro user_stp l, reg1, reg2, addr, offs_inc
> +8888: sttr \reg1, [\addr, \offs_inc];
> +8889: sttr \reg2, [\addr, \offs_inc + 8];
>
> _asm_extable_uaccess 8888b,\l;
> _asm_extable_uaccess 8889b,\l;
> diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
> index 34e317907524..c575829b85be 100644
> --- a/arch/arm64/lib/copy_from_user.S
> +++ b/arch/arm64/lib/copy_from_user.S
> @@ -49,7 +49,7 @@
> .endm
>
> .macro stp1 reg1, reg2, ptr, val
> - stp \reg1, \reg2, [\ptr], \val
> + stp \reg1, \reg2, [\ptr, \val]
> .endm
>
> end .req x5
> @@ -62,12 +62,25 @@ SYM_FUNC_START(__arch_copy_from_user)
> ret
>
> // Exception fixups
> -9997: cmp dst, dstin
> +9997: sub x7, src, srcin
> + sub x8, dst, dstin
> + cmp x7, x8
> + b.le no_need_to_adjust_src
> + sub x9, x7, x8
> + sub src, src, p_copy
> + add p_copy, p_copy, x9
> +no_need_to_adjust_src:
> + cmp dst, dstin
> b.ne 9998f
> // Before being absolutely sure we couldn't copy anything, try harder
> -USER(9998f, ldtrb tmp1w, [srcin])
> +calculate_bytes_copied:
> +USER(9999f, ldtrb tmp1w, [src])
> strb tmp1w, [dst], #1
> -9998: sub x0, end, dst // bytes not copied
> + add src, src, #1
> + sub p_copy, p_copy, #1
> +9998: cmp p_copy, 0
> + b.ge calculate_bytes_copied
> +9999: sub x0, end, dst // bytes not copied
> ret
> SYM_FUNC_END(__arch_copy_from_user)
> EXPORT_SYMBOL(__arch_copy_from_user)
> diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
> index 488df234c49a..8832b9fd0257 100644
> --- a/arch/arm64/lib/copy_template.S
> +++ b/arch/arm64/lib/copy_template.S
> @@ -29,6 +29,7 @@ tmp1w .req w3
> tmp2 .req x4
> tmp2w .req w4
> dst .req x6
> +p_copy .req x16
>
> A_l .req x7
> A_h .req x8
> @@ -39,6 +40,7 @@ C_h .req x12
> D_l .req x13
> D_h .req x14
>
> + mov p_copy, 16
> mov dst, dstin
> cmp count, #16
> /*When memory length is less than 16, the accessed are not aligned.*/
> @@ -82,19 +84,26 @@ D_h .req x14
> * Copy up to 48 bytes of data. At this point we only need the
> * bottom 6 bits of count to be accurate.
> */
> + mov p_copy, #16
> ands tmp1, count, #0x30
> b.eq .Ltiny15
> cmp tmp1w, #0x20
> b.eq 1f
> b.lt 2f
> - ldp1 A_l, A_h, src, #16
> - stp1 A_l, A_h, dst, #16
> + ldp1 A_l, A_h, src, #0
> + stp1 A_l, A_h, dst, #0
> + add src, src, #16
> + add dst, dst, #16
> 1:
> - ldp1 A_l, A_h, src, #16
> - stp1 A_l, A_h, dst, #16
> + ldp1 A_l, A_h, src, #0
> + stp1 A_l, A_h, dst, #0
> + add src, src, #16
> + add dst, dst, #16
> 2:
> - ldp1 A_l, A_h, src, #16
> - stp1 A_l, A_h, dst, #16
> + ldp1 A_l, A_h, src, #0
> + stp1 A_l, A_h, dst, #0
> + add src, src, #16
> + add dst, dst, #16
> .Ltiny15:
> /*
> * Prefer to break one ldp/stp into several load/store to access
> @@ -126,20 +135,23 @@ D_h .req x14
> b .Lexitfunc
>
> .Lcpy_over64:
> + mov p_copy, #64
> subs count, count, #128
> b.ge .Lcpy_body_large
> /*
> * Less than 128 bytes to copy, so handle 64 here and then jump
> * to the tail.
> */
> - ldp1 A_l, A_h, src, #16
> - stp1 A_l, A_h, dst, #16
> + ldp1 A_l, A_h, src, #0
> + stp1 A_l, A_h, dst, #0
> ldp1 B_l, B_h, src, #16
> - ldp1 C_l, C_h, src, #16
> + ldp1 C_l, C_h, src, #32
> stp1 B_l, B_h, dst, #16
> - stp1 C_l, C_h, dst, #16
> - ldp1 D_l, D_h, src, #16
> - stp1 D_l, D_h, dst, #16
> + stp1 C_l, C_h, dst, #32
> + ldp1 D_l, D_h, src, #48
> + stp1 D_l, D_h, dst, #48
> + add src, src, #64
> + add dst, dst, #64
>
> tst count, #0x3f
> b.ne .Ltail63
> @@ -152,30 +164,34 @@ D_h .req x14
> .p2align L1_CACHE_SHIFT
> .Lcpy_body_large:
> /* pre-get 64 bytes data. */
> - ldp1 A_l, A_h, src, #16
> + ldp1 A_l, A_h, src, #0
> ldp1 B_l, B_h, src, #16
> - ldp1 C_l, C_h, src, #16
> - ldp1 D_l, D_h, src, #16
> + ldp1 C_l, C_h, src, #32
> + ldp1 D_l, D_h, src, #48
> + add src, src, #64
> 1:
> /*
> * interlace the load of next 64 bytes data block with store of the last
> * loaded 64 bytes data.
> */
> - stp1 A_l, A_h, dst, #16
> - ldp1 A_l, A_h, src, #16
> + stp1 A_l, A_h, dst, #0
> + ldp1 A_l, A_h, src, #0
> stp1 B_l, B_h, dst, #16
> ldp1 B_l, B_h, src, #16
> - stp1 C_l, C_h, dst, #16
> - ldp1 C_l, C_h, src, #16
> - stp1 D_l, D_h, dst, #16
> - ldp1 D_l, D_h, src, #16
> + stp1 C_l, C_h, dst, #32
> + ldp1 C_l, C_h, src, #32
> + stp1 D_l, D_h, dst, #48
> + ldp1 D_l, D_h, src, #48
> + add src, src, #64
> + add dst, dst, #64
> subs count, count, #64
> b.ge 1b
> - stp1 A_l, A_h, dst, #16
> + stp1 A_l, A_h, dst, #0
> stp1 B_l, B_h, dst, #16
> - stp1 C_l, C_h, dst, #16
> - stp1 D_l, D_h, dst, #16
> + stp1 C_l, C_h, dst, #32
> + stp1 D_l, D_h, dst, #48
> + add dst, dst, #64
>
> tst count, #0x3f
> b.ne .Ltail63
> -.Lexitfunc:
> +.Lexitfunc: mov p_copy, #0
> diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
> index 802231772608..89db19e09ca2 100644
> --- a/arch/arm64/lib/copy_to_user.S
> +++ b/arch/arm64/lib/copy_to_user.S
> @@ -44,7 +44,7 @@
> .endm
>
> .macro ldp1 reg1, reg2, ptr, val
> - ldp \reg1, \reg2, [\ptr], \val
> + ldp \reg1, \reg2, [\ptr, \val]
> .endm
>
> .macro stp1 reg1, reg2, ptr, val
> @@ -61,13 +61,25 @@ SYM_FUNC_START(__arch_copy_to_user)
> ret
>
> // Exception fixups
> -9997: cmp dst, dstin
> +9997: sub x7, src, srcin
> + sub x8, dst, dstin
> + cmp x7, x8
> + b.le no_need_to_adjust_src
> + sub x9, x7, x8
> + sub src, src, x9
> + add p_copy, p_copy, x9
> +no_need_to_adjust_src:
> + cmp dst, dstin
> b.ne 9998f
> // Before being absolutely sure we couldn't copy anything, try harder
> - ldrb tmp1w, [srcin]
> -USER(9998f, sttrb tmp1w, [dst])
> +calculate_bytes_copied:
> + ldrb tmp1w, [src], #1
> +USER(9999f, sttrb tmp1w, [dst])
> add dst, dst, #1
> -9998: sub x0, end, dst // bytes not copied
> + sub p_copy, p_copy, #1
> +9998: cmp p_copy, 0
> + b.ge calculate_bytes_copied
> +9999: sub x0, end, dst // bytes not copied
> ret
> SYM_FUNC_END(__arch_copy_to_user)
> EXPORT_SYMBOL(__arch_copy_to_user)
> --
> 2.34.1
>
Hi Mark,
On 2024/3/12 23:38, Mark Rutland wrote:
> On Tue, Mar 12, 2024 at 11:08:45PM +0800, Li Zetao wrote:
>> In the copy_from/to_user scenario, due to the need to accurately
>> calculate the number of copied bytes for fixup, it is necessary to
>> increment the values of src and dst after each copy of the data.
>> Therefore, this introduce RAW dependency which result in some bubble
>> in pipline and degrade the IPC.
>>
>> Consider updating the values of src and dst only when the copy is
>> completed in the current stage to reduce data dependence. But this will
>> break the function of fixup, so in order to maintain the function of
>> fixup, a new variable is introduced to record the number of bytes to be
>> copied in the current stage. Once an access exception occurs, the variable
>> can be used to determined the final index of access exception by copying
>> byte-by-byte.
>>
>> Here are the test result:
>> Copy 128 bytes cost on Kunpeng-920(us):
>> Without this patch:
>> copy_from_user: 1.0187 copy_to_user: 1.1021
>>
>> With this patch:
>> copy_from_user: 0.9523 copy_to_user: 1.0159
>>
>> It's about 7% improvement in copy_from/to_user()
>
> How exactly are you testing this? Can you share your test code?
>
> The current structure of this code (and e.g. the use of write-back addressing)
> is largely force upon us by the structure of the Cortex strings functions,
> which are already painful enough to read and work on. If we're going to rewrite
> those I'd rather we abandoned the Cortex strings template for usercopies.
>
> I had previously attempted to rewrite some of these along with some functional
> tests:
>
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> Could you give those a go? Specifically, could you see how copy_to_user()
> performs with the patch at:
>
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> .. if that gets you a similar benefit I'd be happy to revive the series and
> give copy_from_user() similar treatment.
I tested your patch and the result is as follows:
Copy 128 bytes cost on Kunpeng-920(us):
With your patch:
copy_to_user: 1.1967
No performance gain. I guess your patch changed the original copy order,
which affected the final performance.
Inspired by your patch, we can reduce the impact of data dependency
without changing the original copy order. This can not only remove the
template.S file, but also improve performance. For example, what do you
think of the following code? Looking forward to your opinion.
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2012 ARM Ltd.
*/
#include <linux/linkage.h>
#include <asm/asm-uaccess.h>
#include <asm/assembler.h>
#include <asm/cache.h>
/*
* Copy to user space from a kernel buffer (alignment handled by the
hardware)
*
* Parameters:
* x0 - to
* x1 - from
* x2 - n
* Returns:
* x0 - bytes not copied
*/
end .req x5
dstin .req x0
srcin .req x15
src .req x1
count .req x2
tmp1 .req x3
tmp1w .req w3
tmp2 .req x4
tmp2w .req w4
dst .req x6
A_l .req x7
A_h .req x8
B_l .req x9
B_h .req x10
C_l .req x11
C_h .req x12
D_l .req x13
D_h .req x14
#define USER_OFF(off, x...) USER(fixup_offset_##off, x)
#define FIXUP_OFFSET(n) \
fixup_offset_##n: \
sub x0, end, dst; \
sub x0, x0, n; \
ret
FIXUP_OFFSET(0)
FIXUP_OFFSET(8)
FIXUP_OFFSET(16)
FIXUP_OFFSET(24)
FIXUP_OFFSET(32)
FIXUP_OFFSET(40)
FIXUP_OFFSET(48)
FIXUP_OFFSET(56)
SYM_FUNC_START(__arch_copy_to_user)
add end, x0, x2
mov srcin, x1
mov dst, dstin
cmp count, #16
/*When memory length is less than 16, the accessed are not aligned.*/
b.lo .Ltiny15
neg tmp2, src
ands tmp2, tmp2, #15/* Bytes to reach alignment. */
b.eq .LSrcAligned
sub count, count, tmp2
/*
* Copy the leading memory data from src to dst in an increasing
* address order.By this way,the risk of overwriting the source
* memory data is eliminated when the distance between src and
* dst is less than 16. The memory accesses here are alignment.
*/
tbz tmp2, #0, 1f
ldrb tmp1w, [src], #1
USER_OFF(0, sttrb tmp1w, [dst, #0])
add dst, dst, #1
1:
tbz tmp2, #1, 2f
ldrh tmp1w, [src], #2
USER_OFF(0, sttrh tmp1w, [dst, #0])
add dst, dst, #2
2:
tbz tmp2, #2, 3f
ldr tmp1w, [src], #4
USER_OFF(0, sttr tmp1w, [dst, #0])
add dst, dst, #4
3:
tbz tmp2, #3, .LSrcAligned
ldr tmp1, [src], #8
USER_OFF(0, sttr tmp1, [dst, #0])
add dst, dst, #8
LSrcAligned:
cmp count, #64
b.ge .Lcpy_over64
/*
* Deal with small copies quickly by dropping straight into the
* exit block.
*/
Ltail63:
/*
* Copy up to 48 bytes of data. At this point we only need the
* bottom 6 bits of count to be accurate.
*/
ands tmp1, count, #0x30
b.eq .Ltiny15
cmp tmp1w, #0x20
b.eq 1f
b.lt 2f
ldp A_l, A_h, [src], #16
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
add dst, dst, #16
1:
ldp A_l, A_h, [src], #16
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
add dst, dst, #16
2:
ldp A_l, A_h, [src], #16
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
add dst, dst, #16
Ltiny15:
/*
* Prefer to break one ldp/stp into several load/store to access
* memory in an increasing address order,rather than to load/store 16
* bytes from (src-16) to (dst-16) and to backward the src to aligned
* address,which way is used in original cortex memcpy. If keeping
* the original memcpy process here, memmove need to satisfy the
* precondition that src address is at least 16 bytes bigger than dst
* address,otherwise some source data will be overwritten when memove
* call memcpy directly. To make memmove simpler and decouple the
* memcpy's dependency on memmove, withdrew the original process.
*/
tbz count, #3, 1f
ldr tmp1, [src], #8
USER_OFF(0, sttr tmp1, [dst, #0])
add dst, dst, #8
1:
tbz count, #2, 2f
ldr tmp1w, [src], #4
USER_OFF(0, sttr tmp1w, [dst, #0])
add dst, dst, #4
2:
tbz count, #1, 3f
ldrh tmp1w, [src], #2
USER_OFF(0, sttrh tmp1w, [dst, #0])
add dst, dst, #2
3:
tbz count, #0, .Lexitfunc
ldrb tmp1w, [src], #1
USER_OFF(0, sttrb tmp1w, [dst, #0])
add dst, dst, #1
b .Lexitfunc
Lcpy_over64:
subs count, count, #128
b.ge .Lcpy_body_large
/*
* Less than 128 bytes to copy, so handle 64 here and then jump
* to the tail.
*/
ldp A_l, A_h, [src, #0]
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
ldp B_l, B_h, [src, #16]
ldp C_l, C_h, [src, #32]
USER_OFF(16, sttr B_l, [dst, #16])
USER_OFF(24, sttr B_h, [dst, #24])
USER_OFF(32, sttr C_l, [dst, #32])
USER_OFF(40, sttr C_h, [dst, #40])
ldp D_l, D_h, [src, #48]
USER_OFF(48, sttr D_l, [dst, #48])
USER_OFF(56, sttr D_h, [dst, #56])
add src, src, #64
add dst, dst, #64
tst count, #0x3f
b.ne .Ltail63
b .Lexitfunc
/*
* Critical loop. Start at a new cache line boundary. Assuming
* 64 bytes per line this ensures the entire loop is in one line.
*/
.p2align L1_CACHE_SHIFT
Lcpy_body_large:
/* pre-get 64 bytes data. */
ldp A_l, A_h, [src, #0]
ldp B_l, B_h, [src, #16]
ldp C_l, C_h, [src, #32]
ldp D_l, D_h, [src, #48]
add src, src, #64
1:
/*
* interlace the load of next 64 bytes data block with store of the last
* loaded 64 bytes data.
*/
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
ldp A_l, A_h, [src, #0]
USER_OFF(16, sttr B_l, [dst, #16])
USER_OFF(24, sttr B_h, [dst, #24])
ldp B_l, B_h, [src, #16]
USER_OFF(32, sttr C_l, [dst, #32])
USER_OFF(40, sttr C_h, [dst, #40])
ldp C_l, C_h, [src, #32]
USER_OFF(48, sttr D_l, [dst, #48])
USER_OFF(56, sttr D_h, [dst, #56])
ldp D_l, D_h, [src, #48]
add src, src, #64
add dst, dst, #64
subs count, count, #64
b.ge 1b
USER_OFF(0, sttr A_l, [dst, #0])
USER_OFF(8, sttr A_h, [dst, #8])
USER_OFF(16, sttr B_l, [dst, #16])
USER_OFF(24, sttr B_h, [dst, #24])
USER_OFF(32, sttr C_l, [dst, #32])
USER_OFF(40, sttr C_h, [dst, #40])
USER_OFF(48, sttr D_l, [dst, #48])
USER_OFF(56, sttr D_h, [dst, #56])
add dst, dst, #64
tst count, #0x3f
b.ne .Ltail63
Lexitfunc:
mov x0, #0
ret
SYM_FUNC_END(__arch_copy_to_user)
EXPORT_SYMBOL(__arch_copy_to_user)
>
> Thanks,
> Mark.
>
>> Signed-off-by: Li Zetao <[email protected]>
>> ---
>> arch/arm64/include/asm/asm-uaccess.h | 14 +++---
>> arch/arm64/lib/copy_from_user.S | 21 +++++++--
>> arch/arm64/lib/copy_template.S | 66 +++++++++++++++++-----------
>> arch/arm64/lib/copy_to_user.S | 22 +++++++---
>> 4 files changed, 81 insertions(+), 42 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
>> index 5b6efe8abeeb..ccbde0d0c113 100644
>> --- a/arch/arm64/include/asm/asm-uaccess.h
>> +++ b/arch/arm64/include/asm/asm-uaccess.h
>> @@ -66,19 +66,17 @@ alternative_else_nop_endif
>> * This is complicated as there is no post-increment or pair versions of the
>> * unprivileged instructions, and USER() only works for single instructions.
>> */
>> - .macro user_ldp l, reg1, reg2, addr, post_inc
>> -8888: ldtr \reg1, [\addr];
>> -8889: ldtr \reg2, [\addr, #8];
>> - add \addr, \addr, \post_inc;
>> + .macro user_ldp l, reg1, reg2, addr, offs_inc
>> +8888: ldtr \reg1, [\addr, \offs_inc];
>> +8889: ldtr \reg2, [\addr, \offs_inc + 8];
>>
>> _asm_extable_uaccess 8888b, \l;
>> _asm_extable_uaccess 8889b, \l;
>> .endm
>>
>> - .macro user_stp l, reg1, reg2, addr, post_inc
>> -8888: sttr \reg1, [\addr];
>> -8889: sttr \reg2, [\addr, #8];
>> - add \addr, \addr, \post_inc;
>> + .macro user_stp l, reg1, reg2, addr, offs_inc
>> +8888: sttr \reg1, [\addr, \offs_inc];
>> +8889: sttr \reg2, [\addr, \offs_inc + 8];
>>
>> _asm_extable_uaccess 8888b,\l;
>> _asm_extable_uaccess 8889b,\l;
>> diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
>> index 34e317907524..c575829b85be 100644
>> --- a/arch/arm64/lib/copy_from_user.S
>> +++ b/arch/arm64/lib/copy_from_user.S
>> @@ -49,7 +49,7 @@
>> .endm
>>
>> .macro stp1 reg1, reg2, ptr, val
>> - stp \reg1, \reg2, [\ptr], \val
>> + stp \reg1, \reg2, [\ptr, \val]
>> .endm
>>
>> end .req x5
>> @@ -62,12 +62,25 @@ SYM_FUNC_START(__arch_copy_from_user)
>> ret
>>
>> // Exception fixups
>> -9997: cmp dst, dstin
>> +9997: sub x7, src, srcin
>> + sub x8, dst, dstin
>> + cmp x7, x8
>> + b.le no_need_to_adjust_src
>> + sub x9, x7, x8
>> + sub src, src, p_copy
>> + add p_copy, p_copy, x9
>> +no_need_to_adjust_src:
>> + cmp dst, dstin
>> b.ne 9998f
>> // Before being absolutely sure we couldn't copy anything, try harder
>> -USER(9998f, ldtrb tmp1w, [srcin])
>> +calculate_bytes_copied:
>> +USER(9999f, ldtrb tmp1w, [src])
>> strb tmp1w, [dst], #1
>> -9998: sub x0, end, dst // bytes not copied
>> + add src, src, #1
>> + sub p_copy, p_copy, #1
>> +9998: cmp p_copy, 0
>> + b.ge calculate_bytes_copied
>> +9999: sub x0, end, dst // bytes not copied
>> ret
>> SYM_FUNC_END(__arch_copy_from_user)
>> EXPORT_SYMBOL(__arch_copy_from_user)
>> diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
>> index 488df234c49a..8832b9fd0257 100644
>> --- a/arch/arm64/lib/copy_template.S
>> +++ b/arch/arm64/lib/copy_template.S
>> @@ -29,6 +29,7 @@ tmp1w .req w3
>> tmp2 .req x4
>> tmp2w .req w4
>> dst .req x6
>> +p_copy .req x16
>>
>> A_l .req x7
>> A_h .req x8
>> @@ -39,6 +40,7 @@ C_h .req x12
>> D_l .req x13
>> D_h .req x14
>>
>> + mov p_copy, 16
>> mov dst, dstin
>> cmp count, #16
>> /*When memory length is less than 16, the accessed are not aligned.*/
>> @@ -82,19 +84,26 @@ D_h .req x14
>> * Copy up to 48 bytes of data. At this point we only need the
>> * bottom 6 bits of count to be accurate.
>> */
>> + mov p_copy, #16
>> ands tmp1, count, #0x30
>> b.eq .Ltiny15
>> cmp tmp1w, #0x20
>> b.eq 1f
>> b.lt 2f
>> - ldp1 A_l, A_h, src, #16
>> - stp1 A_l, A_h, dst, #16
>> + ldp1 A_l, A_h, src, #0
>> + stp1 A_l, A_h, dst, #0
>> + add src, src, #16
>> + add dst, dst, #16
>> 1:
>> - ldp1 A_l, A_h, src, #16
>> - stp1 A_l, A_h, dst, #16
>> + ldp1 A_l, A_h, src, #0
>> + stp1 A_l, A_h, dst, #0
>> + add src, src, #16
>> + add dst, dst, #16
>> 2:
>> - ldp1 A_l, A_h, src, #16
>> - stp1 A_l, A_h, dst, #16
>> + ldp1 A_l, A_h, src, #0
>> + stp1 A_l, A_h, dst, #0
>> + add src, src, #16
>> + add dst, dst, #16
>> .Ltiny15:
>> /*
>> * Prefer to break one ldp/stp into several load/store to access
>> @@ -126,20 +135,23 @@ D_h .req x14
>> b .Lexitfunc
>>
>> .Lcpy_over64:
>> + mov p_copy, #64
>> subs count, count, #128
>> b.ge .Lcpy_body_large
>> /*
>> * Less than 128 bytes to copy, so handle 64 here and then jump
>> * to the tail.
>> */
>> - ldp1 A_l, A_h, src, #16
>> - stp1 A_l, A_h, dst, #16
>> + ldp1 A_l, A_h, src, #0
>> + stp1 A_l, A_h, dst, #0
>> ldp1 B_l, B_h, src, #16
>> - ldp1 C_l, C_h, src, #16
>> + ldp1 C_l, C_h, src, #32
>> stp1 B_l, B_h, dst, #16
>> - stp1 C_l, C_h, dst, #16
>> - ldp1 D_l, D_h, src, #16
>> - stp1 D_l, D_h, dst, #16
>> + stp1 C_l, C_h, dst, #32
>> + ldp1 D_l, D_h, src, #48
>> + stp1 D_l, D_h, dst, #48
>> + add src, src, #64
>> + add dst, dst, #64
>>
>> tst count, #0x3f
>> b.ne .Ltail63
>> @@ -152,30 +164,34 @@ D_h .req x14
>> .p2align L1_CACHE_SHIFT
>> .Lcpy_body_large:
>> /* pre-get 64 bytes data. */
>> - ldp1 A_l, A_h, src, #16
>> + ldp1 A_l, A_h, src, #0
>> ldp1 B_l, B_h, src, #16
>> - ldp1 C_l, C_h, src, #16
>> - ldp1 D_l, D_h, src, #16
>> + ldp1 C_l, C_h, src, #32
>> + ldp1 D_l, D_h, src, #48
>> + add src, src, #64
>> 1:
>> /*
>> * interlace the load of next 64 bytes data block with store of the last
>> * loaded 64 bytes data.
>> */
>> - stp1 A_l, A_h, dst, #16
>> - ldp1 A_l, A_h, src, #16
>> + stp1 A_l, A_h, dst, #0
>> + ldp1 A_l, A_h, src, #0
>> stp1 B_l, B_h, dst, #16
>> ldp1 B_l, B_h, src, #16
>> - stp1 C_l, C_h, dst, #16
>> - ldp1 C_l, C_h, src, #16
>> - stp1 D_l, D_h, dst, #16
>> - ldp1 D_l, D_h, src, #16
>> + stp1 C_l, C_h, dst, #32
>> + ldp1 C_l, C_h, src, #32
>> + stp1 D_l, D_h, dst, #48
>> + ldp1 D_l, D_h, src, #48
>> + add src, src, #64
>> + add dst, dst, #64
>> subs count, count, #64
>> b.ge 1b
>> - stp1 A_l, A_h, dst, #16
>> + stp1 A_l, A_h, dst, #0
>> stp1 B_l, B_h, dst, #16
>> - stp1 C_l, C_h, dst, #16
>> - stp1 D_l, D_h, dst, #16
>> + stp1 C_l, C_h, dst, #32
>> + stp1 D_l, D_h, dst, #48
>> + add dst, dst, #64
>>
>> tst count, #0x3f
>> b.ne .Ltail63
>> -.Lexitfunc:
>> +.Lexitfunc: mov p_copy, #0
>> diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
>> index 802231772608..89db19e09ca2 100644
>> --- a/arch/arm64/lib/copy_to_user.S
>> +++ b/arch/arm64/lib/copy_to_user.S
>> @@ -44,7 +44,7 @@
>> .endm
>>
>> .macro ldp1 reg1, reg2, ptr, val
>> - ldp \reg1, \reg2, [\ptr], \val
>> + ldp \reg1, \reg2, [\ptr, \val]
>> .endm
>>
>> .macro stp1 reg1, reg2, ptr, val
>> @@ -61,13 +61,25 @@ SYM_FUNC_START(__arch_copy_to_user)
>> ret
>>
>> // Exception fixups
>> -9997: cmp dst, dstin
>> +9997: sub x7, src, srcin
>> + sub x8, dst, dstin
>> + cmp x7, x8
>> + b.le no_need_to_adjust_src
>> + sub x9, x7, x8
>> + sub src, src, x9
>> + add p_copy, p_copy, x9
>> +no_need_to_adjust_src:
>> + cmp dst, dstin
>> b.ne 9998f
>> // Before being absolutely sure we couldn't copy anything, try harder
>> - ldrb tmp1w, [srcin]
>> -USER(9998f, sttrb tmp1w, [dst])
>> +calculate_bytes_copied:
>> + ldrb tmp1w, [src], #1
>> +USER(9999f, sttrb tmp1w, [dst])
>> add dst, dst, #1
>> -9998: sub x0, end, dst // bytes not copied
>> + sub p_copy, p_copy, #1
>> +9998: cmp p_copy, 0
>> + b.ge calculate_bytes_copied
>> +9999: sub x0, end, dst // bytes not copied
>> ret
>> SYM_FUNC_END(__arch_copy_to_user)
>> EXPORT_SYMBOL(__arch_copy_to_user)
>> --
>> 2.34.1
>>
>
Best regards,
Li Zetao