From: Peng Fan <[email protected]>
It would be easier to locate the problem if domain name is printed out.
And including a coding style update.
Signed-off-by: Peng Fan <[email protected]>
---
drivers/firmware/arm_scmi/perf.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 345fff167b52..e98ca6d15b0c 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -79,7 +79,7 @@ struct scmi_msg_resp_perf_domain_attributes {
__le32 rate_limit_us;
__le32 sustained_freq_khz;
__le32 sustained_perf_level;
- u8 name[SCMI_SHORT_NAME_MAX_SIZE];
+ u8 name[SCMI_SHORT_NAME_MAX_SIZE];
};
struct scmi_msg_perf_describe_levels {
@@ -387,8 +387,8 @@ process_response_opp(struct device *dev, struct perf_dom_info *dom,
ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
if (ret)
- dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
- opp->perf, ret);
+ dev_warn(dev, "Failed to add opps_by_lvl at %d for %s- ret:%d\n",
+ opp->perf, dom->info.name, ret);
}
static inline void
@@ -405,8 +405,8 @@ process_response_opp_v4(struct device *dev, struct perf_dom_info *dom,
ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
if (ret)
- dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
- opp->perf, ret);
+ dev_warn(dev, "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
+ opp->perf, dom->info.name, ret);
/* Note that PERF v4 reports always five 32-bit words */
opp->indicative_freq = le32_to_cpu(r->opp[loop_idx].indicative_freq);
--
2.37.1
On Wed, Mar 20, 2024 at 03:42:13PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> It would be easier to locate the problem if domain name is printed out.
> And including a coding style update.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> drivers/firmware/arm_scmi/perf.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
> index 345fff167b52..e98ca6d15b0c 100644
> --- a/drivers/firmware/arm_scmi/perf.c
> +++ b/drivers/firmware/arm_scmi/perf.c
> @@ -79,7 +79,7 @@ struct scmi_msg_resp_perf_domain_attributes {
> __le32 rate_limit_us;
> __le32 sustained_freq_khz;
> __le32 sustained_perf_level;
> - u8 name[SCMI_SHORT_NAME_MAX_SIZE];
> + u8 name[SCMI_SHORT_NAME_MAX_SIZE];
Spurious change ?
> };
>
> struct scmi_msg_perf_describe_levels {
> @@ -387,8 +387,8 @@ process_response_opp(struct device *dev, struct perf_dom_info *dom,
>
> ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
> if (ret)
> - dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
> - opp->perf, ret);
> + dev_warn(dev, "Failed to add opps_by_lvl at %d for %s- ret:%d\n",
> + opp->perf, dom->info.name, ret);
> }
>
> static inline void
> @@ -405,8 +405,8 @@ process_response_opp_v4(struct device *dev, struct perf_dom_info *dom,
>
> ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
> if (ret)
> - dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
> - opp->perf, ret);
> + dev_warn(dev, "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
> + opp->perf, dom->info.name, ret);
>
Are you really hitting these issues ? Or is it just code
observation/improvements ?
It looks good otherwise. You can also add the below change when you respin.
--
Regards,
Sudeep
diff --git i/drivers/firmware/arm_scmi/perf.c w/drivers/firmware/arm_scmi/perf.c
index 211e8e0aef2c..ef1c27a65552 100644
--- i/drivers/firmware/arm_scmi/perf.c
+++ w/drivers/firmware/arm_scmi/perf.c
@@ -830,7 +830,8 @@ static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph,
ret = dev_pm_opp_add_dynamic(dev, &data);
if (ret) {
- dev_warn(dev, "failed to add opp %luHz\n", freq);
+ dev_warn(dev, "[%d][%s]: Failed to add OPP[%d] %lu\n",
+ domain, dom->info.name, idx, freq);
dev_pm_opp_remove_all_dynamic(dev);
return ret;
}
> Subject: Re: [PATCH] firmware: arm_scmi: perf: print domain name in error
> path
>
> On Wed, Mar 20, 2024 at 03:42:13PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <[email protected]>
> >
> > It would be easier to locate the problem if domain name is printed out.
> > And including a coding style update.
> >
> > Signed-off-by: Peng Fan <[email protected]>
> > ---
> > drivers/firmware/arm_scmi/perf.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/firmware/arm_scmi/perf.c
> > b/drivers/firmware/arm_scmi/perf.c
> > index 345fff167b52..e98ca6d15b0c 100644
> > --- a/drivers/firmware/arm_scmi/perf.c
> > +++ b/drivers/firmware/arm_scmi/perf.c
> > @@ -79,7 +79,7 @@ struct scmi_msg_resp_perf_domain_attributes {
> > __le32 rate_limit_us;
> > __le32 sustained_freq_khz;
> > __le32 sustained_perf_level;
> > - u8 name[SCMI_SHORT_NAME_MAX_SIZE];
> > + u8 name[SCMI_SHORT_NAME_MAX_SIZE];
>
> Spurious change ?
I just think this is a coding style cleanup, I could drop it in v2.
>
> > };
> >
> > struct scmi_msg_perf_describe_levels { @@ -387,8 +387,8 @@
> > process_response_opp(struct device *dev, struct perf_dom_info *dom,
> >
> > ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
> > if (ret)
> > - dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
> > - opp->perf, ret);
> > + dev_warn(dev, "Failed to add opps_by_lvl at %d for %s-
> ret:%d\n",
> > + opp->perf, dom->info.name, ret);
> > }
> >
> > static inline void
> > @@ -405,8 +405,8 @@ process_response_opp_v4(struct device *dev,
> struct
> > perf_dom_info *dom,
> >
> > ret = xa_insert(&dom->opps_by_lvl, opp->perf, opp, GFP_KERNEL);
> > if (ret)
> > - dev_warn(dev, "Failed to add opps_by_lvl at %d - ret:%d\n",
> > - opp->perf, ret);
> > + dev_warn(dev, "Failed to add opps_by_lvl at %d for %s -
> ret:%d\n",
> > + opp->perf, dom->info.name, ret);
> >
>
> Are you really hitting these issues ?
Yes. two levels had same freq on i.MX95, but we fixed.
Or is it just code
> observation/improvements ?
>
> It looks good otherwise. You can also add the below change when you respin.
ok, will include in v2.
Thanks,
Peng.
>
> --
> Regards,
> Sudeep
>
> diff --git i/drivers/firmware/arm_scmi/perf.c
> w/drivers/firmware/arm_scmi/perf.c
> index 211e8e0aef2c..ef1c27a65552 100644
> --- i/drivers/firmware/arm_scmi/perf.c
> +++ w/drivers/firmware/arm_scmi/perf.c
> @@ -830,7 +830,8 @@ static int scmi_dvfs_device_opps_add(const struct
> scmi_protocol_handle *ph,
>
> ret = dev_pm_opp_add_dynamic(dev, &data);
> if (ret) {
> - dev_warn(dev, "failed to add opp %luHz\n", freq);
> + dev_warn(dev, "[%d][%s]: Failed to add OPP[%d] %lu\n",
> + domain, dom->info.name, idx, freq);
> dev_pm_opp_remove_all_dynamic(dev);
> return ret;
> }