On Tue, Mar 26, 2024 at 04:49:05PM +0530, Siddharth Vadapalli wrote:
> In the process of converting .scan_bus() callbacks to .add_bus(), the
> ks_pcie_v3_65_scan_bus() function was changed to ks_pcie_v3_65_add_bus().
> The .scan_bus() method belonged to ks_pcie_host_ops which was specific
> to controller version 3.65a, while the .add_bus() method had been added
> to ks_pcie_ops which is shared between the controller versions 3.65a and
> 4.90a. Neither the older ks_pcie_v3_65_scan_bus() method, nor the newer
> ks_pcie_v3_65_add_bus() method are applicable to the controller version
> 4.90a which is present in AM654x SoCs.
>
> Thus, as a fix, move the contents of "ks_pcie_v3_65_add_bus()" to the
> .msi_init callback "ks_pcie_msi_host_init()" which is specific to the
> 3.65a controller. Also, move the definitions of ks_pcie_set_dbi_mode()
> and ks_pcie_clear_dbi_mode() above ks_pcie_msi_host_init() in order to
> avoid forward declaration.
>
> Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
> Suggested-by: Serge Semin <[email protected]>
> Suggested-by: Bjorn Helgaas <[email protected]>
> Suggested-by: Niklas Cassel <[email protected]>
> Signed-off-by: Siddharth Vadapalli <[email protected]>
> ---
>
> Hello,
>
> This patch is based on linux-next tagged next-20240326.
>
> v4:
> https://lore.kernel.org/r/[email protected]/
> Changes since v4:
> - As suggested by Niklas Cassel <[email protected]> at:
> https://lore.kernel.org/r/ZgF_5fYsI5lOFjOv@ryzen/
> the contents of "ks_pcie_v3_65_add_bus()" have been moved to
> "ks_pcie_msi_host_init()" instead of "ks_pcie_host_init()". This
> avoids unnecessary checks for "!ks_pcie->is_am6" since
> "ks_pcie_msi_host_init()" is specific to the v3.65a controller version
> which corresponds to "!ks_pcie->is_am6".
> - Updated commit message to match the change in implementation.
> - Added "Suggested-by" tag of Niklas Cassel <[email protected]> based on:
> https://lore.kernel.org/r/ZgKaNrhoReJ0A525@x1-carbon/
> - Moved the definitions for ks_pcie_set_dbi_mode() and
> ks_pcie_clear_dbi_mode() above ks_pcie_msi_host_init().
>
> Regards,
> Siddharth.
>
> drivers/pci/controller/dwc/pci-keystone.c | 136 ++++++++++------------
> 1 file changed, 60 insertions(+), 76 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
> index 844de4418724..c2252448d9e8 100644
> --- a/drivers/pci/controller/dwc/pci-keystone.c
> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> @@ -245,8 +245,68 @@ static struct irq_chip ks_pcie_msi_irq_chip = {
> .irq_unmask = ks_pcie_msi_unmask,
> };
>
> +/**
> + * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers
> + * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
> + * PCIe host controller driver information.
> + *
> + * Since modification of dbi_cs2 involves different clock domain, read the
> + * status back to ensure the transition is complete.
> + */
> +static void ks_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie)
> +{
> + u32 val;
> +
> + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
> + val |= DBI_CS2;
> + ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
> +
> + do {
> + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
> + } while (!(val & DBI_CS2));
> +}
> +
> +/**
> + * ks_pcie_clear_dbi_mode() - Disable DBI mode
> + * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
> + * PCIe host controller driver information.
> + *
> + * Since modification of dbi_cs2 involves different clock domain, read the
> + * status back to ensure the transition is complete.
> + */
> +static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
> +{
> + u32 val;
> +
> + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
> + val &= ~DBI_CS2;
> + ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
> +
> + do {
> + val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
> + } while (val & DBI_CS2);
> +}
> +
> static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp)
> {
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
> +
> + /* Configure and set up BAR0 */
> + ks_pcie_set_dbi_mode(ks_pcie);
> +
> + /* Enable BAR0 */
> + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
> + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
> +
> + ks_pcie_clear_dbi_mode(ks_pcie);
> +
> + /*
> + * For BAR0, just setting bus address for inbound writes (MSI) should
> + * be sufficient. Use physical address to avoid any conflicts.
> + */
This comment seems to have wrong indentation.
With that fixed:
Reviewed-by: Niklas Cassel <[email protected]>
> + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
> +
> pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
> return dw_pcie_allocate_domains(pp);
> }
On Tue, Mar 26, 2024 at 02:56:26PM +0100, Niklas Cassel wrote:
> On Tue, Mar 26, 2024 at 04:49:05PM +0530, Siddharth Vadapalli wrote:
> > In the process of converting .scan_bus() callbacks to .add_bus(), the
> > ks_pcie_v3_65_scan_bus() function was changed to ks_pcie_v3_65_add_bus().
> > The .scan_bus() method belonged to ks_pcie_host_ops which was specific
> > to controller version 3.65a, while the .add_bus() method had been added
> > to ks_pcie_ops which is shared between the controller versions 3.65a and
> > 4.90a. Neither the older ks_pcie_v3_65_scan_bus() method, nor the newer
> > ks_pcie_v3_65_add_bus() method are applicable to the controller version
> > 4.90a which is present in AM654x SoCs.
> >
..
> > + } while (val & DBI_CS2);
> > +}
> > +
> > static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp)
> > {
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
> > +
> > + /* Configure and set up BAR0 */
> > + ks_pcie_set_dbi_mode(ks_pcie);
> > +
> > + /* Enable BAR0 */
> > + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
> > + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
> > +
> > + ks_pcie_clear_dbi_mode(ks_pcie);
> > +
> > + /*
> > + * For BAR0, just setting bus address for inbound writes (MSI) should
> > + * be sufficient. Use physical address to avoid any conflicts.
> > + */
>
> This comment seems to have wrong indentation.
> With that fixed:
>
> Reviewed-by: Niklas Cassel <[email protected]>
I will fix it and post the v6 patch.
Regards,
Siddharth.