Masahiro's patch[1] made me wonder why we're not just using KBUILD_IMAGE
to determine which (possibly compressed) kernel image to use in 'make
tar-pkg' like other architectures do. It turns out we're always setting
KBUILD_IMAGE to the uncompressed Image file and then compressing it into
the Image.gz file afterwards.
This series fixes that so the compression method is configurable and
KBUILD_IMAGE is set to the chosen (possibly uncompressed) kernel image
which is then used by targets like 'make install' and 'make bindeb-pkg' and
'make tar-pkg'.
Changes in v2:
- Rebase on riscv/for-next
- Use boot-image-$(CONFIG_..) := assignments rather than ifeq train in
patch 1
- Drop patch 3 already applied to kbuild/for-next
Emil Renner Berthing (2):
riscv: make image compression configurable
riscv: show help string for riscv-specific targets
arch/riscv/Kconfig | 7 +++++
arch/riscv/Makefile | 55 ++++++++++++++++++++++++--------------
arch/riscv/boot/install.sh | 9 ++++---
3 files changed, 48 insertions(+), 23 deletions(-)
--
2.43.0
Previously the build process would always set KBUILD_IMAGE to the
uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
unconditionally compress it into Image.gz. However there are already
build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
Image.zstd, so let's make use of those, make the compression method
configurable and set KBUILD_IMAGE accordingly so that targets like
'make install' and 'make bindeb-pkg' will use the chosen image.
Tested-by: Björn Töpel <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
---
Changes in v2:
- Rebase on riscv/for-next
- Use boot-image-$(CONFIG_..) := assignments rather than ifeq train
---
arch/riscv/Kconfig | 7 +++++++
arch/riscv/Makefile | 38 ++++++++++++++++++--------------------
arch/riscv/boot/install.sh | 9 ++++++---
3 files changed, 31 insertions(+), 23 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 6bec1bce6586..79e558397f41 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -140,6 +140,13 @@ config RISCV
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_VDSO if MMU && 64BIT
select HAVE_IRQ_TIME_ACCOUNTING
+ select HAVE_KERNEL_BZIP2 if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_GZIP if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_LZ4 if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_LZMA if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_LZO if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_UNCOMPRESSED if !XIP_KERNEL && !EFI_ZBOOT
+ select HAVE_KERNEL_ZSTD if !XIP_KERNEL && !EFI_ZBOOT
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
select HAVE_KRETPROBES if !XIP_KERNEL
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 8b2ae27f1d98..07ff2f34f0dc 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -136,20 +136,20 @@ endif
CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
# Default target when executing plain make
-boot := arch/riscv/boot
-ifeq ($(CONFIG_XIP_KERNEL),y)
-KBUILD_IMAGE := $(boot)/xipImage
-else
-ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_ARCH_CANAAN),yy)
-KBUILD_IMAGE := $(boot)/loader.bin
-else
-ifeq ($(CONFIG_EFI_ZBOOT),)
-KBUILD_IMAGE := $(boot)/Image.gz
-else
-KBUILD_IMAGE := $(boot)/vmlinuz.efi
-endif
-endif
+boot := arch/riscv/boot
+boot-image-y := Image
+boot-image-$(CONFIG_KERNEL_BZIP2) := Image.bz2
+boot-image-$(CONFIG_KERNEL_GZIP) := Image.gz
+boot-image-$(CONFIG_KERNEL_LZ4) := Image.lz4
+boot-image-$(CONFIG_KERNEL_LZMA) := Image.lzma
+boot-image-$(CONFIG_KERNEL_LZO) := Image.lzo
+boot-image-$(CONFIG_KERNEL_ZSTD) := Image.zst
+ifdef CONFIG_RISCV_M_MODE
+boot-image-$(CONFIG_ARCH_CANAAN) := loader.bin
endif
+boot-image-$(CONFIG_EFI_ZBOOT) := vmlinuz.efi
+boot-image-$(CONFIG_XIP_KERNEL) := xipImage
+KBUILD_IMAGE := $(boot)/$(boot-image-y)
libs-y += arch/riscv/lib/
libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
@@ -168,21 +168,19 @@ endif
vdso-install-y += arch/riscv/kernel/vdso/vdso.so.dbg
vdso-install-$(CONFIG_COMPAT) += arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg
-BOOT_TARGETS := Image Image.gz loader loader.bin xipImage vmlinuz.efi
+BOOT_TARGETS := Image Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst loader loader.bin xipImage vmlinuz.efi
all: $(notdir $(KBUILD_IMAGE))
loader.bin: loader
-Image.gz loader vmlinuz.efi: Image
+Image.gz Image.bz2 Image.lz4 Image.lzma Image.lzo Image.zst loader xipImage vmlinuz.efi: Image
+
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
@$(kecho) ' Kernel: $(boot)/$@ is ready'
-Image.%: Image
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-install: KBUILD_IMAGE := $(boot)/Image
-zinstall: KBUILD_IMAGE := $(boot)/Image.gz
+# the install target always installs KBUILD_IMAGE (which may be compressed)
+# but keep the zinstall target for compatibility with older releases
install zinstall:
$(call cmd,install)
diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
index 4c63f3f0643d..a8df7591513a 100755
--- a/arch/riscv/boot/install.sh
+++ b/arch/riscv/boot/install.sh
@@ -17,15 +17,18 @@
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-if [ "$(basename $2)" = "Image.gz" ]; then
+case "${2##*/}" in
# Compressed install
+Image.*|vmlinuz.efi)
echo "Installing compressed kernel"
base=vmlinuz
-else
+ ;;
# Normal install
+*)
echo "Installing normal kernel"
base=vmlinux
-fi
+ ;;
+esac
if [ -f $4/$base-$1 ]; then
mv $4/$base-$1 $4/$base-$1.old
--
2.43.0
Define the archhelp variable so that 'make ACRH=riscv help' will show
the targets specific to building a RISC-V kernel like other
architectures.
Tested-by: Björn Töpel <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
---
arch/riscv/Makefile | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 07ff2f34f0dc..ae51720199a3 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -201,3 +201,20 @@ rv32_defconfig:
PHONY += rv32_nommu_virt_defconfig
rv32_nommu_virt_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile nommu_virt_defconfig 32-bit.config
+
+define archhelp
+ echo ' Image - Uncompressed kernel image (arch/riscv/boot/Image)'
+ echo ' Image.gz - Compressed kernel image (arch/riscv/boot/Image.gz)'
+ echo ' Image.bz2 - Compressed kernel image (arch/riscv/boot/Image.bz2)'
+ echo ' Image.lz4 - Compressed kernel image (arch/riscv/boot/Image.lz4)'
+ echo ' Image.lzma - Compressed kernel image (arch/riscv/boot/Image.lzma)'
+ echo ' Image.lzo - Compressed kernel image (arch/riscv/boot/Image.lzo)'
+ echo ' Image.zst - Compressed kernel image (arch/riscv/boot/Image.zst)'
+ echo ' vmlinuz.efi - Compressed EFI kernel image (arch/riscv/boot/vmlinuz.efi)'
+ echo ' Default when CONFIG_EFI_ZBOOT=y'
+ echo ' xipImage - Execute-in-place kernel image (arch/riscv/boot/xipImage)'
+ echo ' Default when CONFIG_XIP_KERNEL=y'
+ echo ' install - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or install to '
+ echo ' $$(INSTALL_PATH)'
+endef
--
2.43.0
On Sat, May 04, 2024 at 09:34:38PM +0200, Emil Renner Berthing wrote:
> Previously the build process would always set KBUILD_IMAGE to the
> uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
> unconditionally compress it into Image.gz. However there are already
> build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
> Image.zstd, so let's make use of those, make the compression method
> configurable and set KBUILD_IMAGE accordingly so that targets like
> 'make install' and 'make bindeb-pkg' will use the chosen image.
>
> Tested-by: Björn Töpel <[email protected]>
> Signed-off-by: Emil Renner Berthing <[email protected]>
> ---
> Changes in v2:
> - Rebase on riscv/for-next
> - Use boot-image-$(CONFIG_..) := assignments rather than ifeq train
> ---
Looks good to me.
Reviewed-by: Nicolas Schier <[email protected]>
On Sun, May 5, 2024 at 4:34 AM Emil Renner Berthing
<[email protected]> wrote:
>
> Previously the build process would always set KBUILD_IMAGE to the
> uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
> unconditionally compress it into Image.gz. However there are already
> build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
> Image.zstd, so let's make use of those, make the compression method
> configurable and set KBUILD_IMAGE accordingly so that targets like
> 'make install' and 'make bindeb-pkg' will use the chosen image.
>
> Tested-by: Björn Töpel <[email protected]>
> Signed-off-by: Emil Renner Berthing <[email protected]>
Reviewed-by: Masahiro Yamada <[email protected]>
--
Best Regards
Masahiro Yamada
On Sun, May 5, 2024 at 4:34 AM Emil Renner Berthing
<[email protected]> wrote:
>
> Define the archhelp variable so that 'make ACRH=riscv help' will show
> the targets specific to building a RISC-V kernel like other
> architectures.
>
> Tested-by: Björn Töpel <[email protected]>
> Signed-off-by: Emil Renner Berthing <[email protected]>
> ---
Reviewed-by: Masahiro Yamada <[email protected]>
--
Best Regards
Masahiro Yamada
Hello:
This series was applied to riscv/linux.git (for-next)
by Palmer Dabbelt <[email protected]>:
On Sat, 4 May 2024 21:34:37 +0200 you wrote:
> Masahiro's patch[1] made me wonder why we're not just using KBUILD_IMAGE
> to determine which (possibly compressed) kernel image to use in 'make
> tar-pkg' like other architectures do. It turns out we're always setting
> KBUILD_IMAGE to the uncompressed Image file and then compressing it into
> the Image.gz file afterwards.
>
> This series fixes that so the compression method is configurable and
> KBUILD_IMAGE is set to the chosen (possibly uncompressed) kernel image
> which is then used by targets like 'make install' and 'make bindeb-pkg' and
> 'make tar-pkg'.
>
> [...]
Here is the summary with links:
- [v2,1/2] riscv: make image compression configurable
https://git.kernel.org/riscv/c/c1f59d035966
- [v2,2/2] riscv: show help string for riscv-specific targets
https://git.kernel.org/riscv/c/5e3964ba8400
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html