Libyuv is one software library used to covert format. Only covert
mediatek uncompressed mode MM21 to standard yuv420 for MT21 is
compressed mode. Need to set capture queue format to MM21 in order
to use Libyuv when scp firmware support MM21 and MT21.
Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
Signed-off-by: Yunfei Dong <[email protected]>
---
changed with v2:
- re-write commit message.
- change the driver flow.
changed with v1:
- add Fixes tag.
---
.../platform/mediatek/vcodec/mtk_vcodec_dec.c | 24 +++----------------
1 file changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
index 641f533c417f..c99705681a03 100644
--- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
@@ -39,10 +39,9 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
{
const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
const struct mtk_video_fmt *fmt;
- struct mtk_q_data *q_data;
int num_frame_count = 0, i;
- bool ret = true;
+ fmt = &dec_pdata->vdec_formats[format_index];
for (i = 0; i < *dec_pdata->num_formats; i++) {
if (dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME)
continue;
@@ -50,27 +49,10 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
num_frame_count++;
}
- if (num_frame_count == 1)
+ if (num_frame_count == 1 || fmt->fourcc == V4L2_PIX_FMT_MM21)
return true;
- fmt = &dec_pdata->vdec_formats[format_index];
- q_data = &ctx->q_data[MTK_Q_DATA_SRC];
- switch (q_data->fmt->fourcc) {
- case V4L2_PIX_FMT_VP8_FRAME:
- if (fmt->fourcc == V4L2_PIX_FMT_MM21)
- ret = true;
- break;
- case V4L2_PIX_FMT_H264_SLICE:
- case V4L2_PIX_FMT_VP9_FRAME:
- if (fmt->fourcc == V4L2_PIX_FMT_MM21)
- ret = false;
- break;
- default:
- ret = true;
- break;
- }
-
- return ret;
+ return false;
}
static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
--
2.25.1
Il 14/03/23 08:25, Yunfei Dong ha scritto:
> Libyuv is one software library used to covert format. Only covert
> mediatek uncompressed mode MM21 to standard yuv420 for MT21 is
> compressed mode. Need to set capture queue format to MM21 in order
> to use Libyuv when scp firmware support MM21 and MT21.
>
> Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
> Signed-off-by: Yunfei Dong <[email protected]>
After the firmware gets sent to linux-firmware *and ONLY after that*:
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
> ---
> changed with v2:
> - re-write commit message.
> - change the driver flow.
> changed with v1:
> - add Fixes tag.
> ---
> .../platform/mediatek/vcodec/mtk_vcodec_dec.c | 24 +++----------------
> 1 file changed, 3 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> index 641f533c417f..c99705681a03 100644
> --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> @@ -39,10 +39,9 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> {
> const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
> const struct mtk_video_fmt *fmt;
> - struct mtk_q_data *q_data;
> int num_frame_count = 0, i;
> - bool ret = true;
>
> + fmt = &dec_pdata->vdec_formats[format_index];
> for (i = 0; i < *dec_pdata->num_formats; i++) {
> if (dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME)
> continue;
> @@ -50,27 +49,10 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> num_frame_count++;
> }
>
> - if (num_frame_count == 1)
> + if (num_frame_count == 1 || fmt->fourcc == V4L2_PIX_FMT_MM21)
> return true;
>
> - fmt = &dec_pdata->vdec_formats[format_index];
> - q_data = &ctx->q_data[MTK_Q_DATA_SRC];
> - switch (q_data->fmt->fourcc) {
> - case V4L2_PIX_FMT_VP8_FRAME:
> - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> - ret = true;
> - break;
> - case V4L2_PIX_FMT_H264_SLICE:
> - case V4L2_PIX_FMT_VP9_FRAME:
> - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> - ret = false;
> - break;
> - default:
> - ret = true;
> - break;
> - }
> -
> - return ret;
> + return false;
> }
>
> static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
On Tue, 2023-03-14 at 10:45 +0100, AngeloGioacchino Del Regno wrote:
> Il 14/03/23 08:25, Yunfei Dong ha scritto:
> > Libyuv is one software library used to covert format. Only covert
> > mediatek uncompressed mode MM21 to standard yuv420 for MT21 is
> > compressed mode. Need to set capture queue format to MM21 in order
> > to use Libyuv when scp firmware support MM21 and MT21.
> >
> > Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
> > Signed-off-by: Yunfei Dong <[email protected]>
>
>
> After the firmware gets sent to linux-firmware *and ONLY after that*:
>
> Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
The firmwares are sent to linux-firmware.
https://lore.kernel.org/linux-firmware/[email protected]/T/#u
>
> > ---
> > changed with v2:
> > - re-write commit message.
> > - change the driver flow.
> > changed with v1:
> > - add Fixes tag.
> > ---
> > .../platform/mediatek/vcodec/mtk_vcodec_dec.c | 24 +++----------------
> > 1 file changed, 3 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > index 641f533c417f..c99705681a03 100644
> > --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > @@ -39,10 +39,9 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> > {
> > const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
> > const struct mtk_video_fmt *fmt;
> > - struct mtk_q_data *q_data;
> > int num_frame_count = 0, i;
> > - bool ret = true;
> >
> > + fmt = &dec_pdata->vdec_formats[format_index];
> > for (i = 0; i < *dec_pdata->num_formats; i++) {
> > if (dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME)
> > continue;
> > @@ -50,27 +49,10 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> > num_frame_count++;
> > }
> >
> > - if (num_frame_count == 1)
> > + if (num_frame_count == 1 || fmt->fourcc == V4L2_PIX_FMT_MM21)
> > return true;
> >
> > - fmt = &dec_pdata->vdec_formats[format_index];
> > - q_data = &ctx->q_data[MTK_Q_DATA_SRC];
> > - switch (q_data->fmt->fourcc) {
> > - case V4L2_PIX_FMT_VP8_FRAME:
> > - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> > - ret = true;
> > - break;
> > - case V4L2_PIX_FMT_H264_SLICE:
> > - case V4L2_PIX_FMT_VP9_FRAME:
> > - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> > - ret = false;
> > - break;
> > - default:
> > - ret = true;
> > - break;
> > - }
> > -
> > - return ret;
> > + return false;
> > }
> >
> > static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
>
>
--
Best regards,
TingHan
Hi Yunfei,
thanks for the patch.
On Tue, Mar 14, 2023 at 03:25:57PM +0800, Yunfei Dong wrote:
> Libyuv is one software library used to covert format. Only covert
> mediatek uncompressed mode MM21 to standard yuv420 for MT21 is
> compressed mode. Need to set capture queue format to MM21 in order
> to use Libyuv when scp firmware support MM21 and MT21.
This commit message is a bit confusing still. Here's a suggestion:
While the decoder can produce frames in both MM21 and MT21C formats, only MM21
is currently supported by userspace tools (like gstreamer and libyuv). In order
to ensure userspace keeps working after the SCP firmware is updated to support
both MM21 and MT21C formats, force the MM21 format for the capture queue.
This is meant as a stopgap solution while dynamic format switching between
MM21 and MT21C isn't implemented in the driver.
>
> Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec using different capture format")
> Signed-off-by: Yunfei Dong <[email protected]>
> ---
> changed with v2:
> - re-write commit message.
> - change the driver flow.
> changed with v1:
> - add Fixes tag.
> ---
> .../platform/mediatek/vcodec/mtk_vcodec_dec.c | 24 +++----------------
> 1 file changed, 3 insertions(+), 21 deletions(-)
>
While this change works (that is, I'm able to run fluster tests on both MT8192
and MT8195 using the new MM21+MT21C firmware), it causes a regression on
v4l2-compliance:
[..]
Format ioctls:
[..]
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(478): pixelformat 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
[..]
Total for mtk-vcodec-dec device /dev/video2: 46, Succeeded: 43, Failed: 3, Warnings: 0
The patch makes only MM21 show in VIDIOC_ENUM_FMT, but VIDIOC_S_FMT,
VIDIOC_G_FMT and VIDIOC_TRY_FMT still show MT21. So I think you need to do the
same forcing of MM21 for those ioctls.
Thanks,
N?colas
> diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> index 641f533c417f..c99705681a03 100644
> --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> @@ -39,10 +39,9 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> {
> const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev->vdec_pdata;
> const struct mtk_video_fmt *fmt;
> - struct mtk_q_data *q_data;
> int num_frame_count = 0, i;
> - bool ret = true;
>
> + fmt = &dec_pdata->vdec_formats[format_index];
> for (i = 0; i < *dec_pdata->num_formats; i++) {
> if (dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME)
> continue;
> @@ -50,27 +49,10 @@ static bool mtk_vdec_get_cap_fmt(struct mtk_vcodec_ctx *ctx, int format_index)
> num_frame_count++;
> }
>
> - if (num_frame_count == 1)
> + if (num_frame_count == 1 || fmt->fourcc == V4L2_PIX_FMT_MM21)
> return true;
>
> - fmt = &dec_pdata->vdec_formats[format_index];
> - q_data = &ctx->q_data[MTK_Q_DATA_SRC];
> - switch (q_data->fmt->fourcc) {
> - case V4L2_PIX_FMT_VP8_FRAME:
> - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> - ret = true;
> - break;
> - case V4L2_PIX_FMT_H264_SLICE:
> - case V4L2_PIX_FMT_VP9_FRAME:
> - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> - ret = false;
> - break;
> - default:
> - ret = true;
> - break;
> - }
> -
> - return ret;
> + return false;
> }
>
> static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx,
> --
> 2.25.1
>
Hi Nicolas,
Thanks for your suggestion.
On Thu, 2023-03-16 at 16:51 -0400, Nícolas F. R. A. Prado wrote:
> Hi Yunfei,
>
> thanks for the patch.
>
> On Tue, Mar 14, 2023 at 03:25:57PM +0800, Yunfei Dong wrote:
> > Libyuv is one software library used to covert format. Only covert
> > mediatek uncompressed mode MM21 to standard yuv420 for MT21 is
> > compressed mode. Need to set capture queue format to MM21 in order
> > to use Libyuv when scp firmware support MM21 and MT21.
>
> This commit message is a bit confusing still. Here's a suggestion:
>
> While the decoder can produce frames in both MM21 and MT21C
> formats, only MM21
> is currently supported by userspace tools (like gstreamer and
> libyuv). In order
> to ensure userspace keeps working after the SCP firmware is
> updated to support
> both MM21 and MT21C formats, force the MM21 format for the
> capture queue.
>
> This is meant as a stopgap solution while dynamic format
> switching between
> MM21 and MT21C isn't implemented in the driver.
>
Will change it like this.
> >
> > Fixes: 7501edef6b1f ("media: mediatek: vcodec: Different codec
> > using different capture format")
> > Signed-off-by: Yunfei Dong <[email protected]>
> > ---
> > changed with v2:
> > - re-write commit message.
> > - change the driver flow.
> > changed with v1:
> > - add Fixes tag.
> > ---
> > .../platform/mediatek/vcodec/mtk_vcodec_dec.c | 24 +++----------
> > ------
> > 1 file changed, 3 insertions(+), 21 deletions(-)
> >
>
> While this change works (that is, I'm able to run fluster tests on
> both MT8192
> and MT8195 using the new MM21+MT21C firmware), it causes a regression
> on
> v4l2-compliance:
>
> [..]
> Format ioctls:
> [..]
> fail: v4l2-test-formats.cpp(478): pixelformat
> 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
> test VIDIOC_G_FMT: FAIL
> fail: v4l2-test-formats.cpp(478): pixelformat
> 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
> test VIDIOC_TRY_FMT: FAIL
> fail: v4l2-test-formats.cpp(478): pixelformat
> 3132544d (MT21) for buftype 9 not reported by ENUM_FMT
> test VIDIOC_S_FMT: FAIL
> [..]
> Total for mtk-vcodec-dec device /dev/video2: 46, Succeeded: 43,
> Failed: 3, Warnings: 0
>
Need to add one patch to change MM21 as the default capture queue
format.
Best Regards,
Yunfei Dong
> The patch makes only MM21 show in VIDIOC_ENUM_FMT, but VIDIOC_S_FMT,
> VIDIOC_G_FMT and VIDIOC_TRY_FMT still show MT21. So I think you need
> to do the
> same forcing of MM21 for those ioctls.
>
> Thanks,
> Nícolas
>
> > diff --git
> > a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > index 641f533c417f..c99705681a03 100644
> > --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec.c
> > @@ -39,10 +39,9 @@ static bool mtk_vdec_get_cap_fmt(struct
> > mtk_vcodec_ctx *ctx, int format_index)
> > {
> > const struct mtk_vcodec_dec_pdata *dec_pdata = ctx->dev-
> > >vdec_pdata;
> > const struct mtk_video_fmt *fmt;
> > - struct mtk_q_data *q_data;
> > int num_frame_count = 0, i;
> > - bool ret = true;
> >
> > + fmt = &dec_pdata->vdec_formats[format_index];
> > for (i = 0; i < *dec_pdata->num_formats; i++) {
> > if (dec_pdata->vdec_formats[i].type != MTK_FMT_FRAME)
> > continue;
> > @@ -50,27 +49,10 @@ static bool mtk_vdec_get_cap_fmt(struct
> > mtk_vcodec_ctx *ctx, int format_index)
> > num_frame_count++;
> > }
> >
> > - if (num_frame_count == 1)
> > + if (num_frame_count == 1 || fmt->fourcc == V4L2_PIX_FMT_MM21)
> > return true;
> >
> > - fmt = &dec_pdata->vdec_formats[format_index];
> > - q_data = &ctx->q_data[MTK_Q_DATA_SRC];
> > - switch (q_data->fmt->fourcc) {
> > - case V4L2_PIX_FMT_VP8_FRAME:
> > - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> > - ret = true;
> > - break;
> > - case V4L2_PIX_FMT_H264_SLICE:
> > - case V4L2_PIX_FMT_VP9_FRAME:
> > - if (fmt->fourcc == V4L2_PIX_FMT_MM21)
> > - ret = false;
> > - break;
> > - default:
> > - ret = true;
> > - break;
> > - }
> > -
> > - return ret;
> > + return false;
> > }
> >
> > static struct mtk_q_data *mtk_vdec_get_q_data(struct
> > mtk_vcodec_ctx *ctx,
> > --
> > 2.25.1
> >
>
>