From: Xiubo Li <[email protected]>
When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
time when the socket is closed due to the server daemon is restarted,
just before the last DISCONNET is totally done if we start a new connection
by using the old nbd_index, there will be crashing randomly, like:
<3>[ 110.151949] block nbd1: Receive control failed (result -32)
<1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840
<1>[ 110.152063] #PF: supervisor read access in kernel mode
<1>[ 110.152083] #PF: error_code(0x0000) - not-present page
<6>[ 110.152094] PGD 0 P4D 0
<4>[ 110.152106] Oops: 0000 [#1] SMP PTI
<4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
<4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
<4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd]
<4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67
<4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
<4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
<4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
<4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
<4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
<4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
<4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
<4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
<4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
<4>[ 110.152401] Call Trace:
<4>[ 110.152422] _dev_err+0x6c/0x83
<4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd]
<4>[ 110.152448] ? __switch_to_asm+0x34/0x70
<4>[ 110.152468] ? __switch_to_asm+0x40/0x70
<4>[ 110.152478] ? __switch_to_asm+0x34/0x70
<4>[ 110.152491] ? __switch_to_asm+0x40/0x70
<4>[ 110.152501] ? __switch_to_asm+0x34/0x70
<4>[ 110.152511] ? __switch_to_asm+0x40/0x70
<4>[ 110.152522] ? __switch_to_asm+0x34/0x70
<4>[ 110.152533] recv_work+0x35/0x9e [nbd]
<4>[ 110.152547] process_one_work+0x19d/0x340
<4>[ 110.152558] worker_thread+0x50/0x3b0
<4>[ 110.152568] kthread+0xfb/0x130
<4>[ 110.152577] ? process_one_work+0x340/0x340
<4>[ 110.152609] ? kthread_park+0x80/0x80
<4>[ 110.152637] ret_from_fork+0x35/0x40
This is very easy to reproduce by running the nbd-runner.
Signed-off-by: Xiubo Li <[email protected]>
---
drivers/block/nbd.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index e21d2ded732b..b07b4452d696 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -112,6 +112,8 @@ struct nbd_device {
struct list_head list;
struct task_struct *task_recv;
struct task_struct *task_setup;
+
+ bool shutting_down;
};
#define NBD_CMD_REQUEUED 1
@@ -230,8 +232,8 @@ static void nbd_put(struct nbd_device *nbd)
if (refcount_dec_and_mutex_lock(&nbd->refs,
&nbd_index_mutex)) {
idr_remove(&nbd_index_idr, nbd->index);
- mutex_unlock(&nbd_index_mutex);
nbd_dev_remove(nbd);
+ mutex_unlock(&nbd_index_mutex);
}
}
@@ -1103,6 +1105,7 @@ static int nbd_disconnect(struct nbd_device *nbd)
dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
set_bit(NBD_DISCONNECT_REQUESTED, &config->runtime_flags);
+ nbd->shutting_down = true;
send_disconnects(nbd);
return 0;
}
@@ -1761,6 +1764,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
mutex_unlock(&nbd_index_mutex);
return -EINVAL;
}
+
+ if (nbd->shutting_down) {
+ mutex_unlock(&nbd_index_mutex);
+ goto again;
+ }
+
if (!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
if (index == -1)
--
2.21.0
On 08/21/2019 06:57 AM, [email protected] wrote:
> From: Xiubo Li <[email protected]>
>
> When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
> time when the socket is closed due to the server daemon is restarted,
> just before the last DISCONNET is totally done if we start a new connection
> by using the old nbd_index, there will be crashing randomly, like:
>
> <3>[ 110.151949] block nbd1: Receive control failed (result -32)
> <1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840
> <1>[ 110.152063] #PF: supervisor read access in kernel mode
> <1>[ 110.152083] #PF: error_code(0x0000) - not-present page
> <6>[ 110.152094] PGD 0 P4D 0
> <4>[ 110.152106] Oops: 0000 [#1] SMP PTI
> <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
> <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
> <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd]
> <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67
> <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
> <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
> <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
> <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
> <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
> <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
> <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
> <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
> <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
> <4>[ 110.152401] Call Trace:
> <4>[ 110.152422] _dev_err+0x6c/0x83
> <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd]
> <4>[ 110.152448] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152468] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152478] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152491] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152501] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152511] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152522] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152533] recv_work+0x35/0x9e [nbd]
> <4>[ 110.152547] process_one_work+0x19d/0x340
> <4>[ 110.152558] worker_thread+0x50/0x3b0
> <4>[ 110.152568] kthread+0xfb/0x130
> <4>[ 110.152577] ? process_one_work+0x340/0x340
> <4>[ 110.152609] ? kthread_park+0x80/0x80
> <4>[ 110.152637] ret_from_fork+0x35/0x40
>
> This is very easy to reproduce by running the nbd-runner.
>
> Signed-off-by: Xiubo Li <[email protected]>
> ---
> drivers/block/nbd.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> index e21d2ded732b..b07b4452d696 100644
> --- a/drivers/block/nbd.c
> +++ b/drivers/block/nbd.c
> @@ -112,6 +112,8 @@ struct nbd_device {
> struct list_head list;
> struct task_struct *task_recv;
> struct task_struct *task_setup;
> +
> + bool shutting_down;
> };
>
> #define NBD_CMD_REQUEUED 1
> @@ -230,8 +232,8 @@ static void nbd_put(struct nbd_device *nbd)
> if (refcount_dec_and_mutex_lock(&nbd->refs,
> &nbd_index_mutex)) {
> idr_remove(&nbd_index_idr, nbd->index);
> - mutex_unlock(&nbd_index_mutex);
> nbd_dev_remove(nbd);
> + mutex_unlock(&nbd_index_mutex);
> }
> }
>
> @@ -1103,6 +1105,7 @@ static int nbd_disconnect(struct nbd_device *nbd)
>
> dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
> set_bit(NBD_DISCONNECT_REQUESTED, &config->runtime_flags);
> + nbd->shutting_down = true;
> send_disconnects(nbd);
> return 0;
> }
> @@ -1761,6 +1764,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
> mutex_unlock(&nbd_index_mutex);
> return -EINVAL;
> }
> +
> + if (nbd->shutting_down) {
> + mutex_unlock(&nbd_index_mutex);
> + goto again;
> + }
How does shutting_down get set back to false for the case where
NBD_CFLAG_DESTROY_ON_DISCONNECT is not set, we have done a
nbd_disconnect and now the connect has the nbd index of that existing
device. It seems like the flag is going to be stuck as set.
On 2019/8/22 0:43, Mike Christie wrote:
> On 08/21/2019 06:57 AM, [email protected] wrote:
>> From: Xiubo Li <[email protected]>
>>
>> When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
>> time when the socket is closed due to the server daemon is restarted,
>> just before the last DISCONNET is totally done if we start a new connection
>> by using the old nbd_index, there will be crashing randomly, like:
>>
>> <3>[ 110.151949] block nbd1: Receive control failed (result -32)
>> <1>[ 110.152024] BUG: unable to handle page fault for address: 0000058000000840
>> <1>[ 110.152063] #PF: supervisor read access in kernel mode
>> <1>[ 110.152083] #PF: error_code(0x0000) - not-present page
>> <6>[ 110.152094] PGD 0 P4D 0
>> <4>[ 110.152106] Oops: 0000 [#1] SMP PTI
>> <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not tainted 5.3.0-rc4+ #2
>> <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
>> <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd]
>> <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67
>> <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00 [...]
>> <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
>> <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX: 0000000000000000
>> <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI: ffffffff970ec24f
>> <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09: 0000000000002e56
>> <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12: ffff96dd7374e900
>> <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15: ffff96dd6e3b02c8
>> <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000) knlGS:0000000000000000
>> <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4: 00000000001606f0
>> <4>[ 110.152401] Call Trace:
>> <4>[ 110.152422] _dev_err+0x6c/0x83
>> <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd]
>> <4>[ 110.152448] ? __switch_to_asm+0x34/0x70
>> <4>[ 110.152468] ? __switch_to_asm+0x40/0x70
>> <4>[ 110.152478] ? __switch_to_asm+0x34/0x70
>> <4>[ 110.152491] ? __switch_to_asm+0x40/0x70
>> <4>[ 110.152501] ? __switch_to_asm+0x34/0x70
>> <4>[ 110.152511] ? __switch_to_asm+0x40/0x70
>> <4>[ 110.152522] ? __switch_to_asm+0x34/0x70
>> <4>[ 110.152533] recv_work+0x35/0x9e [nbd]
>> <4>[ 110.152547] process_one_work+0x19d/0x340
>> <4>[ 110.152558] worker_thread+0x50/0x3b0
>> <4>[ 110.152568] kthread+0xfb/0x130
>> <4>[ 110.152577] ? process_one_work+0x340/0x340
>> <4>[ 110.152609] ? kthread_park+0x80/0x80
>> <4>[ 110.152637] ret_from_fork+0x35/0x40
>>
>> This is very easy to reproduce by running the nbd-runner.
>>
>> Signed-off-by: Xiubo Li <[email protected]>
>> ---
>> drivers/block/nbd.c | 11 ++++++++++-
>> 1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
>> index e21d2ded732b..b07b4452d696 100644
>> --- a/drivers/block/nbd.c
>> +++ b/drivers/block/nbd.c
>> @@ -112,6 +112,8 @@ struct nbd_device {
>> struct list_head list;
>> struct task_struct *task_recv;
>> struct task_struct *task_setup;
>> +
>> + bool shutting_down;
>> };
>>
>> #define NBD_CMD_REQUEUED 1
>> @@ -230,8 +232,8 @@ static void nbd_put(struct nbd_device *nbd)
>> if (refcount_dec_and_mutex_lock(&nbd->refs,
>> &nbd_index_mutex)) {
>> idr_remove(&nbd_index_idr, nbd->index);
>> - mutex_unlock(&nbd_index_mutex);
>> nbd_dev_remove(nbd);
>> + mutex_unlock(&nbd_index_mutex);
>> }
>> }
>>
>> @@ -1103,6 +1105,7 @@ static int nbd_disconnect(struct nbd_device *nbd)
>>
>> dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
>> set_bit(NBD_DISCONNECT_REQUESTED, &config->runtime_flags);
>> + nbd->shutting_down = true;
>> send_disconnects(nbd);
>> return 0;
>> }
>> @@ -1761,6 +1764,12 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
>> mutex_unlock(&nbd_index_mutex);
>> return -EINVAL;
>> }
>> +
>> + if (nbd->shutting_down) {
>> + mutex_unlock(&nbd_index_mutex);
>> + goto again;
>> + }
> How does shutting_down get set back to false for the case where
> NBD_CFLAG_DESTROY_ON_DISCONNECT is not set, we have done a
> nbd_disconnect and now the connect has the nbd index of that existing
> device. It seems like the flag is going to be stuck as set.
When the NBD_CFLAG_DESTROY_ON_DISCONNECT is set, the nbd_genl_connect()
need to wait for the stale nbd released, and this is what this patch
supposed to do. Since this flag means the nbd must be release anyway, so
the release must be done before reuse the same nbd index, or we will hit
the crash issue and other strange core dumps. So in this case, no need
to get the set back to false.
I think I have missed the case when this flag is not set.
Will check it.
Thanks.