Adds basic support for the Blaize BLZP1600 SoC.
This SoC contains two cores of Cortex-A53 CPUs, one Blaize
Graph Streaming Processor (GSP) and several other IPs.
V2 changes:
* Update SoBs.
* `make dtbs_check` has no warnings.
* Fix dts names and removed dead code.
* DTS is separated from anything else.
Nikolaos Pasaloukos (7):
dt-bindings: Add Blaize vendor prefix
dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
dt-bindings: reset: Add binding constants for BLZP1600
dt-bindings: clock: Add binding constants for BLZP1600
arm64: Add Blaize BLZP1600 SoC family
arm64: Add initial support for Blaize BLZP1600 CB2
arm64: defconfig: Enable ARCH_BLAIZE_BLZP1600
.../devicetree/bindings/arm/blaize.yaml | 40 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/blaize/Makefile | 2 +
.../boot/dts/blaize/blaize-blzp1600-cb2.dts | 84 +++++++
.../boot/dts/blaize/blaize-blzp1600-som.dtsi | 23 ++
.../boot/dts/blaize/blaize-blzp1600.dtsi | 211 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
.../dt-bindings/clock/blaize,blzp1600-clk.h | 77 +++++++
.../dt-bindings/reset/blaize,blzp1600-reset.h | 84 +++++++
11 files changed, 530 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/blaize.yaml
create mode 100644 arch/arm64/boot/dts/blaize/Makefile
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600-som.dtsi
create mode 100644 arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi
create mode 100644 include/dt-bindings/clock/blaize,blzp1600-clk.h
create mode 100644 include/dt-bindings/reset/blaize,blzp1600-reset.h
--
2.34.1
On 24/04/2024 15:31, Niko Pasaloukos wrote:
> Adds basic support for the Blaize BLZP1600 SoC.
> This SoC contains two cores of Cortex-A53 CPUs, one Blaize
> Graph Streaming Processor (GSP) and several other IPs.
>
> V2 changes:
> * Update SoBs.
> * `make dtbs_check` has no warnings.
> * Fix dts names and removed dead code.
> * DTS is separated from anything else.
Your threading is totally broken.
I recommend using b4, if sending patches is tricky. b4 nicely solves
such (and many more) issues.
Best regards,
Krzysztof